mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-04-14 10:07:39 +08:00
68026eadeb
* ekf2: make publishing of learned accel biases more robust * ekf2: reset accel bias if calibration updated * msg: add separate accel and gyro calibration counters * ekf2: use separate accel and gyro calibration counters * ekf2: rework logic to reset biases when calibration counters increment * sensors: add saving of learned accel biases * ekf2: generalized saving accel/gyro/mag in flight sensor calibration * boards: holybro kakutef7 disable systemcmds/perf and systemcmds/top to save flash Co-authored-by: Paul Riseborough <gncsolns@gmail.com>
21 lines
1.2 KiB
Plaintext
21 lines
1.2 KiB
Plaintext
# IMU readings in SI-unit form.
|
|
|
|
uint64 timestamp # time since system start (microseconds)
|
|
uint64 timestamp_sample
|
|
|
|
uint32 accel_device_id # Accelerometer unique device ID for the sensor that does not change between power cycles
|
|
uint32 gyro_device_id # Gyroscope unique device ID for the sensor that does not change between power cycles
|
|
|
|
float32[3] delta_angle # delta angle about the FRD body frame XYZ-axis in rad over the integration time frame (delta_angle_dt)
|
|
float32[3] delta_velocity # delta velocity in the FRD body frame XYZ-axis in m/s over the integration time frame (delta_velocity_dt)
|
|
uint16 delta_angle_dt # integration period in microseconds
|
|
uint16 delta_velocity_dt # integration period in microseconds
|
|
|
|
uint8 CLIPPING_X = 1
|
|
uint8 CLIPPING_Y = 2
|
|
uint8 CLIPPING_Z = 4
|
|
uint8 delta_velocity_clipping # bitfield indicating if there was any accelerometer clipping (per axis) during the integration time frame
|
|
|
|
uint8 accel_calibration_count # Calibration changed counter. Monotonically increases whenever accelermeter calibration changes.
|
|
uint8 gyro_calibration_count # Calibration changed counter. Monotonically increases whenever rate gyro calibration changes.
|