Files
PX4-Autopilot/src/drivers/magnetometer/lis2mdl/lis2mdl_i2c.cpp
T
2023-08-07 20:42:58 -04:00

124 lines
3.2 KiB
C++

/****************************************************************************
*
* Copyright (c) 2020 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file lis2mdl_i2c.cpp
*
* I2C interface for LIS2MDL
*/
#include <px4_platform_common/px4_config.h>
#include <assert.h>
#include <errno.h>
#include <stdint.h>
#include <stdbool.h>
#include <string.h>
#include <sys/types.h>
#include <unistd.h>
#include <drivers/device/i2c.h>
#include "board_config.h"
#include "lis2mdl.h"
class LIS2MDL_I2C : public device::I2C
{
public:
LIS2MDL_I2C(const I2CSPIDriverConfig &config);
virtual ~LIS2MDL_I2C() = default;
virtual int read(unsigned address, void *data, unsigned count);
virtual int write(unsigned address, void *data, unsigned count);
protected:
virtual int probe();
};
device::Device *
LIS2MDL_I2C_interface(const I2CSPIDriverConfig &config);
device::Device *
LIS2MDL_I2C_interface(const I2CSPIDriverConfig &config)
{
return new LIS2MDL_I2C(config);
}
LIS2MDL_I2C::LIS2MDL_I2C(const I2CSPIDriverConfig &config) :
I2C(config)
{
}
int
LIS2MDL_I2C::probe()
{
uint8_t data = 0;
_retries = 1;
if (read(ADDR_WHO_AM_I, &data, 1)) {
DEVICE_DEBUG("read_reg fail");
return -EIO;
}
if (data != ID_WHO_AM_I) {
DEVICE_DEBUG("LIS2MDL bad ID: %02x", data);
return -EIO;
}
return OK;
}
int
LIS2MDL_I2C::read(unsigned address, void *data, unsigned count)
{
uint8_t cmd = address;
return transfer(&cmd, 1, (uint8_t *)data, count);
}
int
LIS2MDL_I2C::write(unsigned address, void *data, unsigned count)
{
uint8_t buf[32];
if (sizeof(buf) < (count + 1)) {
return -EIO;
}
buf[0] = address;
memcpy(&buf[1], data, count);
return transfer(&buf[0], count + 1, nullptr, 0);
}