fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-04-14 10:07:39 +08:00
Code Issues Packages Projects Releases Wiki Activity
PX4-Autopilot/src/drivers
History
Daniel Agar ab4e10dc26 paa3905: update scaling from datasheet
2022-06-21 16:59:14 -04:00
..
adc
px4/fmu-v5x: add ADC_ADS1115_EN param to use external ADC
2022-02-09 16:54:45 -05:00
barometer
sensors: add baro calibration and cleanup
2022-03-26 16:08:41 -04:00
batt_smbus
battery_status: report remaining flight time in seconds
2021-11-15 15:44:02 +01:00
bootloaders
NuttX build in place
2021-11-15 18:47:38 -05:00
camera_capture
Add PPS capture message to logged topics, simplify timestamp logic and small cleanup
2021-12-17 07:56:08 +01:00
camera_trigger
Add PPS capture message to logged topics, simplify timestamp logic and small cleanup
2021-12-17 07:56:08 +01:00
cyphal
Cyphal restore O1Heap statistics
2022-05-11 09:49:18 -04:00
differential_pressure
drivers/differential_pressure/Kconfig: remove ets and ms4515 from common sensors to save flash
2022-06-20 13:04:19 -04:00
distance_sensor
tfmini: If the distance is 0xFFFF, a negative value is returned
2022-01-28 17:31:12 -05:00
dshot
dshot: corrected DShot motor spin direction command
2022-06-02 13:36:40 +02:00
gps
Update submodule GPSDrivers to latest Thu Jun 16 12:38:52 UTC 2022
2022-06-16 12:21:06 -04:00
heater
init adjustments to ensure used topics are advertised early (primarily for logging)
2022-03-23 16:51:16 -04:00
hygrometer
Remove HYGROMETERS from fmu-v5 stackcheck build and rename to COMMON_HYGROMETERS
2022-02-01 08:56:25 -05:00
imu
icm42688p: only check configured registers periodically (as intended)
2022-05-23 14:58:23 -04:00
irlock
drivers/irlock: add SENS_EN_IRLOCK parameter to start driver
2022-02-11 22:57:56 -05:00
lights
[Kconfig] Gnerate px4board from old cmake
2021-10-07 10:09:01 -04:00
linux_pwm_out
output drivers: init SmartLock after exit_and_cleanup
2022-05-12 08:16:35 -04:00
magnetometer
drivers/magnetometer/rm3100: cleanup and simplify (#19238)
2022-02-21 16:48:20 -05:00
optical_flow
paa3905: update scaling from datasheet
2022-06-21 16:59:14 -04:00
osd
failure_detector: add motor/ESC failure detection
2022-05-12 07:58:56 +02:00
pca9685
[Kconfig] Decompose Kconfig, now each module has its own Kconfig
2021-10-07 10:09:01 -04:00
pca9685_pwm_out
px4io: replace safety_off state with safety button event (#19558)
2022-06-01 13:15:13 -04:00
power_monitor
Add I2C retries in INA226 to prevent publishing 0's on a single read failure
2022-04-09 14:23:52 -04:00
pps_capture
pps_capture: fix PARAM_PREFIX for boards with px4io (CONFIG_BOARD_IO)
2021-12-17 07:56:08 +01:00
protocol_splitter
fix protocol_splitter: increment i properly in scan_for_packets
2022-02-04 09:42:52 -05:00
pwm_input
[Kconfig] Decompose Kconfig, now each module has its own Kconfig
2021-10-07 10:09:01 -04:00
pwm_out
drivers/pwm_out: set default failsafe values
2022-06-16 08:09:00 +02:00
pwm_out_sim
output drivers: init SmartLock after exit_and_cleanup
2022-05-12 08:16:35 -04:00
px4io
driver/px4io: set default failsafe values
2022-06-16 08:09:00 +02:00
qshell
[Kconfig] Decompose Kconfig, now each module has its own Kconfig
2021-10-07 10:09:01 -04:00
rc_input
failure_detector: add motor/ESC failure detection
2022-05-12 07:58:56 +02:00
roboclaw
[Kconfig] Decompose Kconfig, now each module has its own Kconfig
2021-10-07 10:09:01 -04:00
rpi_rc_in
[Kconfig] Decompose Kconfig, now each module has its own Kconfig
2021-10-07 10:09:01 -04:00
rpm
Extend the PCF8583 driver to support multiple instances (#19232)
2022-02-21 16:47:16 -05:00
safety_button
safety and safety button: refactoring #19413
2022-04-05 07:57:37 +02:00
smart_battery
battery_status: report remaining flight time in seconds
2021-11-15 15:44:02 +01:00
snapdragon_spektrum_rc
px4io: moving mixing to FMU side
2021-09-25 19:15:05 -04:00
spektrum_rc
[Kconfig] Decompose Kconfig, now each module has its own Kconfig
2021-10-07 10:09:01 -04:00
stub_keystore
Improve stub_keystore configuration
2021-11-29 11:09:51 -05:00
sw_crypto
src/drivers/sw_crypto: Late initialize tomcypt
2022-02-09 10:28:06 -05:00
tap_esc
output drivers: init SmartLock after exit_and_cleanup
2022-05-12 08:16:35 -04:00
tattu_can
add tattu_can smart battery kconfig
2022-04-29 13:49:32 -04:00
telemetry
esc_report: add actuator_function
2022-05-12 07:58:56 +02:00
test_ppm
[Kconfig] Decompose Kconfig, now each module has its own Kconfig
2021-10-07 10:09:01 -04:00
tone_alarm
cleanup module callback registration failed errors
2022-03-23 20:44:50 -04:00
transponder
drivers: Sagetech MXS transponder support
2022-06-20 18:16:07 -04:00
uavcan
optical flow sensor pipeline overhaul
2022-06-20 20:56:56 -04:00
uavcannode
optical flow sensor pipeline overhaul
2022-06-20 20:56:56 -04:00
uwb
Support for NXP UWB position sensor
2022-04-04 17:26:52 +02:00
drv_adc.h
…
drv_board_led.h
…
drv_hrt.h
Add a generic hrt driver userspace interface
2022-02-25 13:35:14 +01:00
drv_input_capture.h
pwm_out, dshot: remove mode_* handling and capture ioctl's
2021-09-08 16:10:24 -04:00
drv_io_heater.h
…
drv_led.h
…
drv_mixer.h
…
drv_neopixel.h
…
drv_orb_dev.h
…
drv_pwm_output.h
drivers/pwm_out: set default failsafe values
2022-06-16 08:09:00 +02:00
drv_pwm_trigger.h
io_timer: reserve pins & timers on first use
2021-09-08 16:10:24 -04:00
drv_sbus.h
…
drv_sensor.h
optical flow sensor pipeline overhaul
2022-06-20 20:56:56 -04:00
drv_tone_alarm.h
…
drv_watchdog.h
px4io: add watchdog
2021-09-01 15:16:00 -04:00
Kconfig
[Kconfig] Decompose Kconfig, now each module has its own Kconfig
2021-10-07 10:09:01 -04:00