mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-04-14 10:07:39 +08:00
2985b5b9c2
For the esc_calibration code, the actuator test is published for each motor in a row. If the orb queue size is too small, messages are lost and not received in mixer_module. Set the default orb queue size of ActuatorTest high enough to keep the commands for all motors in the queue. Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
22 lines
932 B
Plaintext
22 lines
932 B
Plaintext
uint64 timestamp # time since system start (microseconds)
|
|
|
|
# Topic to test individual actuator output functions
|
|
|
|
uint8 ACTION_RELEASE_CONTROL = 0 # exit test mode for the given function
|
|
uint8 ACTION_DO_CONTROL = 1 # enable actuator test mode
|
|
|
|
uint8 FUNCTION_MOTOR1 = 101
|
|
uint8 MAX_NUM_MOTORS = 12
|
|
uint8 FUNCTION_SERVO1 = 201
|
|
uint8 MAX_NUM_SERVOS = 8
|
|
|
|
uint8 action # one of ACTION_*
|
|
uint16 function # actuator output function
|
|
float32 value # range: [-1, 1], where 1 means maximum positive output,
|
|
# 0 to center servos or minimum motor thrust,
|
|
# -1 maximum negative (if not supported by the motors, <0 maps to NaN),
|
|
# and NaN maps to disarmed (stop the motors)
|
|
uint32 timeout_ms # timeout in ms after which to exit test mode (if 0, do not time out)
|
|
|
|
uint8 ORB_QUEUE_LENGTH = 12 # same as MAX_NUM_MOTORS to support code in esc_calibration
|