fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-11-03 01:41:37 +08:00
Code Issues Packages Projects Releases Wiki Activity
Files
c1812af45ef3815d91d3f0e046cab5dfec501018
PX4-Autopilot/src/drivers/boards/aerocore/board_config.h
T

243 lines
10 KiB
C
Raw Blame History

/****************************************************************************
*
* Copyright (c) 2013, 2014 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file board_config.h
*
* AeroCore internal definitions
*/
#pragma once
/****************************************************************************************************
* Included Files
****************************************************************************************************/
#include <px4_config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
/****************************************************************************************************
* Definitions
****************************************************************************************************/
/* LEDs */
#define GPIO_LED0 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN9)
#define GPIO_LED1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN10)
/* Gyro */
#define GPIO_EXTI_GYRO_DRDY (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTD|GPIO_PIN0)
#define SENSOR_BOARD_ROTATION_DEFAULT 3 /* SENSOR_BOARD_ROTATION_270_DEG */
/* Accel & Mag */
#define GPIO_EXTI_MAG_DRDY (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTD|GPIO_PIN1)
#define GPIO_EXTI_ACCEL_DRDY (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTD|GPIO_PIN2)
/* GPS */
#define GPIO_GPS_NRESET (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN5)
#define GPIO_GPS_TIMEPULSE (GPIO_INPUT|GPIO_FLOAT|GPIO_PORTC|GPIO_PIN4)
#define GPS_DEFAULT_UART_PORT "/dev/ttyS0"
/* SPI3--Sensors */
#define PX4_SPI_BUS_SENSORS 3
#define GPIO_SPI_CS_ACCEL_MAG (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN2)
#define GPIO_SPI_CS_GYRO (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
#define GPIO_SPI_CS_BARO (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN4)
/* SPI4--Ramtron */
#define PX4_SPI_BUS_RAMTRON 4
/* Nominal chip selects for devices on SPI bus #3 */
#define PX4_SPIDEV_ACCEL_MAG 0
#define PX4_SPIDEV_GYRO 1
#define PX4_SPIDEV_BARO 2
/* User GPIOs broken out on J11 */
#define GPIO_GPIO0_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN0)
#define GPIO_GPIO1_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN1)
#define GPIO_GPIO3_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN1)
#define GPIO_GPIO4_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN2)
#define GPIO_GPIO5_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN3)
#define GPIO_GPIO6_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTD|GPIO_PIN12)
#define GPIO_GPIO7_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTD|GPIO_PIN13)
#define GPIO_GPIO8_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTD|GPIO_PIN14)
#define GPIO_GPIO9_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTD|GPIO_PIN15)
#define GPIO_GPIO10_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN5)
#define GPIO_GPIO11_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN8)
#define GPIO_GPIO0_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN0)
#define GPIO_GPIO1_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN1)
#define GPIO_GPIO3_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN1)
#define GPIO_GPIO4_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN2)
#define GPIO_GPIO5_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN3)
#define GPIO_GPIO6_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN12)
#define GPIO_GPIO7_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN13)
#define GPIO_GPIO8_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN14)
#define GPIO_GPIO9_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN15)
#define GPIO_GPIO10_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN5)
#define GPIO_GPIO11_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN8)
/*
* ADC channels
*
* These are the channel numbers of the ADCs of the microcontroller that can be used by the Px4 Firmware in the adc driver
*/
#define ADC_CHANNELS (1 << 10) | (1 << 11) | (1 << 12) | (1 << 13)
// ADC defines to be used in sensors.cpp to read from a particular channel
#define ADC_BATTERY_VOLTAGE_CHANNEL 10
#define ADC_BATTERY_CURRENT_CHANNEL ((uint8_t)(-1))
#define ADC_AIRSPEED_VOLTAGE_CHANNEL ((uint8_t)(-1))
/* Define Battery 1 Voltage Divider and A per V
*/
#define BOARD_BATTERY1_V_DIV (7.8196363636f)
#define BOARD_BATTERY1_A_PER_V (15.391030303f)
/* PWM
*
* Eight PWM outputs are configured.
*
* Pins:
*
* CH1 : PA8 : TIM1_CH1
* CH2 : PA9 : TIM1_CH2
* CH3 : PA10 : TIM1_CH3
* CH4 : PA11 : TIM1_CH4
* CH5 : PC6 : TIM3_CH1
* CH6 : PC7 : TIM3_CH2
* CH7 : PC8 : TIM3_CH3
* CH8 : PC9 : TIM3_CH4
*/
#define GPIO_TIM1_CH1OUT GPIO_TIM1_CH1OUT_1
#define GPIO_TIM1_CH2OUT GPIO_TIM1_CH2OUT_1
#define GPIO_TIM1_CH3OUT GPIO_TIM1_CH3OUT_1
#define GPIO_TIM1_CH4OUT GPIO_TIM1_CH4OUT_1
#define GPIO_TIM3_CH1OUT GPIO_TIM3_CH1OUT_3
#define GPIO_TIM3_CH2OUT GPIO_TIM3_CH2OUT_3
#define GPIO_TIM3_CH3OUT GPIO_TIM3_CH3OUT_2
#define GPIO_TIM3_CH4OUT GPIO_TIM3_CH4OUT_2
#define DIRECT_PWM_OUTPUT_CHANNELS 8
#define GPIO_TIM1_CH1IN GPIO_TIM1_CH1IN_2
#define GPIO_TIM1_CH2IN GPIO_TIM1_CH2IN_2
#define GPIO_TIM1_CH3IN GPIO_TIM1_CH3IN_2
#define GPIO_TIM1_CH4IN GPIO_TIM1_CH4IN_2
#define GPIO_TIM3_CH1IN GPIO_TIM3_CH1IN_3
#define GPIO_TIM3_CH2IN GPIO_TIM3_CH2IN_3
#define GPIO_TIM3_CH3IN GPIO_TIM3_CH3IN_2
#define GPIO_TIM3_CH4IN GPIO_TIM3_CH4IN_2
#define DIRECT_INPUT_TIMER_CHANNELS 8
/* High-resolution timer */
#define HRT_TIMER 8 /* use timer 8 for the HRT */
#define HRT_TIMER_CHANNEL 1 /* use capture/compare channel */
/* Tone Alarm (no onboard speaker )*/
#define TONE_ALARM_TIMER 2 /* timer 2 */
#define TONE_ALARM_CHANNEL 1 /* channel 1 */
#define GPIO_TONE_ALARM_IDLE (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN0)
#define GPIO_TONE_ALARM (GPIO_ALT|GPIO_AF1|GPIO_SPEED_2MHz|GPIO_PUSHPULL|GPIO_PORTA|GPIO_PIN0)
#define BOARD_NAME "AEROCORE"
#define BOARD_HAS_PWM 8
/* AeroCore breaks out User GPIOs on J11 */
#define BOARD_FMU_GPIO_TAB { \
{GPIO_GPIO0_INPUT, GPIO_GPIO0_OUTPUT, 0}, \
{GPIO_GPIO1_INPUT, GPIO_GPIO1_OUTPUT, 0}, \
{GPIO_GPIO3_INPUT, GPIO_GPIO3_OUTPUT, 0}, \
{GPIO_GPIO4_INPUT, GPIO_GPIO4_OUTPUT, 0}, \
{GPIO_GPIO5_INPUT, GPIO_GPIO5_OUTPUT, 0}, \
{GPIO_GPIO6_INPUT, GPIO_GPIO6_OUTPUT, 0}, \
{GPIO_GPIO7_INPUT, GPIO_GPIO7_OUTPUT, 0}, \
{GPIO_GPIO8_INPUT, GPIO_GPIO8_OUTPUT, 0}, \
{GPIO_GPIO9_INPUT, GPIO_GPIO9_OUTPUT, 0}, \
{GPIO_GPIO10_INPUT, GPIO_GPIO10_OUTPUT, 0}, \
{GPIO_GPIO11_INPUT, GPIO_GPIO11_OUTPUT, 0}, }
/*
* GPIO numbers.
*
* There are no alternate functions on this board.
*/
#define GPIO_SERVO_1 (1<<0) /**< servo 1 output */
#define GPIO_SERVO_2 (1<<1) /**< servo 2 output */
#define GPIO_SERVO_3 (1<<2) /**< servo 3 output */
#define GPIO_SERVO_4 (1<<3) /**< servo 4 output */
#define GPIO_SERVO_5 (1<<4) /**< servo 5 output */
#define GPIO_SERVO_6 (1<<5) /**< servo 6 output */
#define GPIO_SERVO_7 (1<<6) /**< servo 7 output */
#define GPIO_SERVO_8 (1<<6) /**< servo 8 output */
#define GPIO_SERVO_9 (1<<8) /**< servo 9 output */
#define GPIO_SERVO_10 (1<<9) /**< servo 10 output */
#define GPIO_SERVO_11 (1<<10) /**< servo 11 output */
#define GPIO_SERVO_12 (1<<11) /**< servo 12 output */
__BEGIN_DECLS
/****************************************************************************************************
* Public Types
****************************************************************************************************/
/****************************************************************************************************
* Public data
****************************************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************************************
* Public Functions
****************************************************************************************************/
/****************************************************************************************************
* Name: stm32_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the PX4FMU board.
*
****************************************************************************************************/
extern void stm32_spiinitialize(void);
#define board_spi_reset(ms)
#define board_peripheral_reset(ms)
#include "../common/board_common.h"
#endif /* __ASSEMBLY__ */
__END_DECLS
Reference in New Issue View Git Blame Copy Permalink