PX4-Autopilot/src/modules/ekf2/EKF/mag_control.cpp

/****************************************************************************
 *
 *   Copyright (c) 2019 Estimation and Control Library (ECL). All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name ECL nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/**
 * @file mag_control.cpp
 * Control functions for ekf magnetic field fusion
 */

#include "ekf.h"
#include <mathlib/mathlib.h>

void Ekf::controlMagFusion()
{
	bool mag_data_ready = false;

	magSample mag_sample;

	if (_mag_buffer) {
		mag_data_ready = _mag_buffer->pop_first_older_than(_imu_sample_delayed.time_us, &mag_sample);

		if (mag_data_ready) {
			_mag_lpf.update(mag_sample.mag);
			_mag_counter++;

			// if enabled, use knowledge of theoretical magnetic field vector to calculate a synthetic magnetomter Z component value.
			// this is useful if there is a lot of interference on the sensor measurement.
			if (_params.synthesize_mag_z && (_params.mag_declination_source & GeoDeclinationMask::USE_GEO_DECL)
			    && (_NED_origin_initialised || PX4_ISFINITE(_mag_declination_gps))
			   ) {
				const Vector3f mag_earth_pred = Dcmf(Eulerf(0, -_mag_inclination_gps, _mag_declination_gps)) * Vector3f(_mag_strength_gps, 0, 0);
				mag_sample.mag(2) = calculate_synthetic_mag_z_measurement(mag_sample.mag, mag_earth_pred);
				_control_status.flags.synthetic_mag_z = true;

			} else {
				_control_status.flags.synthetic_mag_z = false;
			}

			_control_status.flags.mag_field_disturbed = magFieldStrengthDisturbed(mag_sample.mag);


			// compute mag heading innovation (for estimator_aid_src_mag_heading logging)
			const Vector3f mag_observation = mag_sample.mag - _state.mag_B;
			const Dcmf R_to_earth = updateYawInRotMat(0.f, _R_to_earth);
			const Vector3f mag_earth_pred = R_to_earth * mag_observation;

			resetEstimatorAidStatus(_aid_src_mag_heading);
			_aid_src_mag_heading.timestamp_sample = mag_sample.time_us;
			_aid_src_mag_heading.observation = -atan2f(mag_earth_pred(1), mag_earth_pred(0)) + getMagDeclination();;
			_aid_src_mag_heading.innovation = wrap_pi(getEulerYaw(_R_to_earth) - _aid_src_mag_heading.observation);

			// compute magnetometer innovations (for estimator_aid_src_mag logging)
			//  rotate magnetometer earth field state into body frame
			const Dcmf R_to_body = quatToInverseRotMat(_state.quat_nominal);
			const Vector3f mag_I_rot = R_to_body * _state.mag_I;
			const Vector3f mag_innov = mag_I_rot - mag_observation;

			resetEstimatorAidStatus(_aid_src_mag);
			_aid_src_mag.timestamp_sample = mag_sample.time_us;
			mag_observation.copyTo(_aid_src_mag.observation);
			mag_innov.copyTo(_aid_src_mag.innovation);
		}
	}

	// If we are on ground, reset the flight alignment flag so that the mag fields will be
	// re-initialised next time we achieve flight altitude
	if (!_control_status.flags.in_air) {
		_control_status.flags.mag_aligned_in_flight = false;
		_num_bad_flight_yaw_events = 0;
	}

	if (_params.mag_fusion_type >= MagFuseType::NONE
	    || _control_status.flags.mag_fault
	    || !_control_status.flags.tilt_align) {

		stopMagFusion();
		return;
	}

	_mag_yaw_reset_req |= !_control_status.flags.yaw_align;
	_mag_yaw_reset_req |= _mag_inhibit_yaw_reset_req;

	if (mag_data_ready && !_control_status.flags.ev_yaw && !_control_status.flags.gps_yaw) {

		const bool mag_enabled_previously = _control_status_prev.flags.mag_hdg || _control_status_prev.flags.mag_3D;

		// Determine if we should use simple magnetic heading fusion which works better when
		// there are large external disturbances or the more accurate 3-axis fusion
		switch (_params.mag_fusion_type) {
		default:
		// FALLTHROUGH
		case MagFuseType::AUTO:
			selectMagAuto();
			break;

		case MagFuseType::INDOOR:

		/* fallthrough */
		case MagFuseType::HEADING:
			startMagHdgFusion();
			break;

		case MagFuseType::MAG_3D:
			startMag3DFusion();
			break;
		}

		const bool mag_enabled = _control_status.flags.mag_hdg || _control_status.flags.mag_3D;

		if (!mag_enabled_previously && mag_enabled) {
			_mag_yaw_reset_req = true;
		}

		if (_control_status.flags.in_air) {
			checkHaglYawResetReq();
			runInAirYawReset(mag_sample.mag);

		} else {
			runOnGroundYawReset();
		}

		if (!_control_status.flags.yaw_align) {
			// Having the yaw aligned is mandatory to continue
			return;
		}

		checkMagDeclRequired();
		checkMagInhibition();

		runMagAndMagDeclFusions(mag_sample.mag);
	}
}

void Ekf::checkHaglYawResetReq()
{
	// We need to reset the yaw angle after climbing away from the ground to enable
	// recovery from ground level magnetic interference.
	if (!_control_status.flags.mag_aligned_in_flight) {
		// Check if height has increased sufficiently to be away from ground magnetic anomalies
		// and request a yaw reset if not already requested.
		static constexpr float mag_anomalies_max_hagl = 1.5f;
		const bool above_mag_anomalies = (getTerrainVPos() - _state.pos(2)) > mag_anomalies_max_hagl;
		_mag_yaw_reset_req = _mag_yaw_reset_req || above_mag_anomalies;
	}
}

void Ekf::runOnGroundYawReset()
{
	if (_mag_yaw_reset_req && !_is_yaw_fusion_inhibited) {
		const bool has_realigned_yaw = canResetMagHeading() ? resetMagHeading() : false;

		if (has_realigned_yaw) {
			_mag_yaw_reset_req = false;
			_control_status.flags.yaw_align = true;

			// Handle the special case where we have not been constraining yaw drift or learning yaw bias due
			// to assumed invalid mag field associated with indoor operation with a downwards looking flow sensor.
			if (_mag_inhibit_yaw_reset_req) {
				_mag_inhibit_yaw_reset_req = false;
				// Zero the yaw bias covariance and set the variance to the initial alignment uncertainty
				P.uncorrelateCovarianceSetVariance<1>(12, sq(_params.switch_on_gyro_bias * _dt_ekf_avg));
			}
		}
	}
}

bool Ekf::canResetMagHeading() const
{
	return !_control_status.flags.mag_field_disturbed && (_params.mag_fusion_type != MagFuseType::NONE);
}

void Ekf::runInAirYawReset(const Vector3f &mag_sample)
{
	if (_mag_yaw_reset_req && !_is_yaw_fusion_inhibited) {
		bool has_realigned_yaw = false;

		if (_control_status.flags.gps && _control_status.flags.fixed_wing) {
			has_realigned_yaw = realignYawGPS(mag_sample);
		}

		if (!has_realigned_yaw && canResetMagHeading()) {
			has_realigned_yaw = resetMagHeading();
		}

		if (has_realigned_yaw) {
			_mag_yaw_reset_req = false;
			_control_status.flags.yaw_align = true;
			_control_status.flags.mag_aligned_in_flight = true;

			// Handle the special case where we have not been constraining yaw drift or learning yaw bias due
			// to assumed invalid mag field associated with indoor operation with a downwards looking flow sensor.
			if (_mag_inhibit_yaw_reset_req) {
				_mag_inhibit_yaw_reset_req = false;
				// Zero the yaw bias covariance and set the variance to the initial alignment uncertainty
				P.uncorrelateCovarianceSetVariance<1>(12, sq(_params.switch_on_gyro_bias * _dt_ekf_avg));
			}
		}

	}
}

void Ekf::selectMagAuto()
{
	check3DMagFusionSuitability();
	canUse3DMagFusion() ? startMag3DFusion() : startMagHdgFusion();
}

void Ekf::check3DMagFusionSuitability()
{
	checkYawAngleObservability();
	checkMagBiasObservability();

	if (_mag_bias_observable || _yaw_angle_observable) {
		_time_last_mov_3d_mag_suitable = _imu_sample_delayed.time_us;
	}
}

void Ekf::checkYawAngleObservability()
{
	// Check if there has been enough change in horizontal velocity to make yaw observable
	// Apply hysteresis to check to avoid rapid toggling
	_yaw_angle_observable = _yaw_angle_observable
				? _accel_lpf_NE.norm() > _params.mag_acc_gate
				: _accel_lpf_NE.norm() > 2.0f * _params.mag_acc_gate;

	_yaw_angle_observable = _yaw_angle_observable
				&& (_control_status.flags.gps || _control_status.flags.ev_pos); // Do we have to add ev_vel here?
}

void Ekf::checkMagBiasObservability()
{
	// check if there is enough yaw rotation to make the mag bias states observable
	if (!_mag_bias_observable && (fabsf(_yaw_rate_lpf_ef) > _params.mag_yaw_rate_gate)) {
		// initial yaw motion is detected
		_mag_bias_observable = true;

	} else if (_mag_bias_observable) {
		// require sustained yaw motion of 50% the initial yaw rate threshold
		const float yaw_dt = 1e-6f * (float)(_imu_sample_delayed.time_us - _time_yaw_started);
		const float min_yaw_change_req =  0.5f * _params.mag_yaw_rate_gate * yaw_dt;
		_mag_bias_observable = fabsf(_yaw_delta_ef) > min_yaw_change_req;
	}

	_yaw_delta_ef = 0.0f;
	_time_yaw_started = _imu_sample_delayed.time_us;
}

bool Ekf::canUse3DMagFusion() const
{
	// Use of 3D fusion requires an in-air heading alignment but it should not
	// be used when the heading and mag biases are not observable for more than 2 seconds
	return _control_status.flags.mag_aligned_in_flight
	       && ((_imu_sample_delayed.time_us - _time_last_mov_3d_mag_suitable) < (uint64_t)2e6);
}

void Ekf::checkMagDeclRequired()
{
	// if we are using 3-axis magnetometer fusion, but without external NE aiding,
	// then the declination must be fused as an observation to prevent long term heading drift
	// fusing declination when gps aiding is available is optional, but recommended to prevent
	// problem if the vehicle is static for extended periods of time
	const bool user_selected = (_params.mag_declination_source & GeoDeclinationMask::FUSE_DECL);
	const bool not_using_ne_aiding = !_control_status.flags.gps;
	_control_status.flags.mag_dec = (_control_status.flags.mag_3D && (not_using_ne_aiding || user_selected));
}

void Ekf::checkMagInhibition()
{
	_is_yaw_fusion_inhibited = shouldInhibitMag();

	if (!_is_yaw_fusion_inhibited) {
		_mag_use_not_inhibit_us = _imu_sample_delayed.time_us;
	}

	// If magnetometer use has been inhibited continuously then a yaw reset is required for a valid heading
	if (uint32_t(_imu_sample_delayed.time_us - _mag_use_not_inhibit_us) > (uint32_t)5e6) {
		_mag_inhibit_yaw_reset_req = true;
	}
}

bool Ekf::shouldInhibitMag() const
{
	// If the user has selected auto protection against indoor magnetic field errors, only use the magnetometer
	// if a yaw angle relative to true North is required for navigation. If no GPS or other earth frame aiding
	// is available, assume that we are operating indoors and the magnetometer should not be used.
	// Also inhibit mag fusion when a strong magnetic field interference is detected or the user
	// has explicitly stopped magnetometer use.
	const bool user_selected = (_params.mag_fusion_type == MagFuseType::INDOOR);

	const bool heading_not_required_for_navigation = !_control_status.flags.gps
			&& !_control_status.flags.ev_pos
			&& !_control_status.flags.ev_vel;

	return (user_selected && heading_not_required_for_navigation) || _control_status.flags.mag_field_disturbed;
}

bool Ekf::magFieldStrengthDisturbed(const Vector3f &mag_sample) const
{
	if (_params.check_mag_strength
	    && ((_params.mag_fusion_type <= MagFuseType::MAG_3D) || (_params.mag_fusion_type == MagFuseType::INDOOR && _control_status.flags.gps))) {

		if (PX4_ISFINITE(_mag_strength_gps)) {
			constexpr float wmm_gate_size = 0.2f; // +/- Gauss
			return !isMeasuredMatchingExpected(mag_sample.length(), _mag_strength_gps, wmm_gate_size);

		} else {
			constexpr float average_earth_mag_field_strength = 0.45f; // Gauss
			constexpr float average_earth_mag_gate_size = 0.40f; // +/- Gauss
			return !isMeasuredMatchingExpected(mag_sample.length(), average_earth_mag_field_strength, average_earth_mag_gate_size);
		}
	}

	return false;
}

bool Ekf::isMeasuredMatchingExpected(const float measured, const float expected, const float gate)
{
	return (measured >= expected - gate)
	       && (measured <= expected + gate);
}

void Ekf::runMagAndMagDeclFusions(const Vector3f &mag)
{
	if (_control_status.flags.mag_3D) {
		run3DMagAndDeclFusions(mag);

	} else if (_control_status.flags.mag_hdg && !_is_yaw_fusion_inhibited) {
		// Rotate the measurements into earth frame using the zero yaw angle
		Dcmf R_to_earth = updateYawInRotMat(0.f, _R_to_earth);

		Vector3f mag_earth_pred = R_to_earth * (mag - _state.mag_B);

		// the angle of the projection onto the horizontal gives the yaw angle
		// calculate the yaw innovation and wrap to the interval between +-pi
		float measured_hdg = -atan2f(mag_earth_pred(1), mag_earth_pred(0)) + getMagDeclination();

		float innovation = wrap_pi(getEulerYaw(_R_to_earth) - measured_hdg);
		float obs_var = fmaxf(sq(_params.mag_heading_noise), 1.e-4f);

		_aid_src_mag_heading.fusion_enabled = _control_status.flags.mag_hdg;

		fuseYaw(innovation, obs_var, _aid_src_mag_heading);
	}
}

void Ekf::run3DMagAndDeclFusions(const Vector3f &mag)
{
	// For the first few seconds after in-flight alignment we allow the magnetic field state estimates to stabilise
	// before they are used to constrain heading drift
	const bool update_all_states = ((_imu_sample_delayed.time_us - _flt_mag_align_start_time) > (uint64_t)5e6)
			&& !_control_status.flags.mag_fault && !_control_status.flags.mag_field_disturbed;

	if (!_mag_decl_cov_reset) {
		// After any magnetic field covariance reset event the earth field state
		// covariances need to be corrected to incorporate knowledge of the declination
		// before fusing magnetomer data to prevent rapid rotation of the earth field
		// states for the first few observations.
		fuseDeclination(0.02f);
		_mag_decl_cov_reset = true;
		fuseMag(mag, _aid_src_mag, update_all_states);

	} else {
		// The normal sequence is to fuse the magnetometer data first before fusing
		// declination angle at a higher uncertainty to allow some learning of
		// declination angle over time.
		fuseMag(mag, _aid_src_mag, update_all_states);

		if (_control_status.flags.mag_dec) {
			fuseDeclination(0.5f);
		}
	}
}