Files
PX4-Autopilot/ROMFS/px4fmu_common/mixers/vtol_AAVVT.aux.mix
T
Silvan Fuhrer 4b8f93de5c FW: rework spoiler/flap control logic
- remove separate flaperon controls input to mixer instead enable spoiler support
- add slew rate limiting on both flap and spoiler controls
- add spoiler configuration for Landing and Descend
- add trimming from spoiler deflection
- FW Attitude control: remove FW_FLAPS_SCL param -->
    The flap settings for takeoff and landing are now specified relative to full range.

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2022-05-03 15:11:21 +02:00

57 lines
1.7 KiB
Plaintext

Aileron/v-tail/throttle VTOL mixer for PX4FMU
=======================================================
# @board px4_fmu-v2 exclude
This file defines mixers suitable for controlling a fixed wing aircraft with
aileron, v-tail (rudder, elevator) and throttle using PX4FMU.
The configuration assumes the aileron servos are connected to PX4FMU
AUX servo output 0 and 1, the tail servos to output 2 and 3, the throttle
to output 4.
Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).
Aileron mixer (roll + spoiler)
---------------------------------
This mixer assumes that the aileron servos are set up correctly mechanically;
depending on the actual configuration it may be necessary to reverse the scaling
factors (to reverse the servo movement) and adjust the offset, scaling and
endpoints to suit.
M: 2
S: 1 0 -10000 -10000 0 -10000 10000
S: 1 5 10000 10000 0 -10000 10000
M: 2
S: 1 0 -10000 -10000 0 -10000 10000
S: 1 5 -10000 -10000 0 -10000 10000
V-tail mixers
-------------
Three scalers total (output, roll, pitch).
On the assumption that the two tail servos are physically reversed, the pitch
input is inverted between the two servos.
M: 2
S: 1 2 -7000 -7000 0 -10000 10000
S: 1 1 -8000 -8000 0 -10000 10000
M: 2
S: 1 2 -7000 -7000 0 -10000 10000
S: 1 1 8000 8000 0 -10000 10000
Motor speed mixer
-----------------
Two scalers total (output, thrust).
This mixer generates a full-range output (-1 to 1) from an input in the (0 - 1)
range. Inputs below zero are treated as zero.
M: 1
S: 1 3 0 20000 -10000 -10000 10000