Matthias Grob 1096384a38 px4iofirmware: don't switch to disarmed or failsafe value on disabled PWM outputs ...

If the output is set to 0 then the FMU had this channel disabled/no function mapped
to it. In that case we do not want to suddenly start outputing failsafe or disarmed
signals.

2024-03-25 19:21:54 +01:00

..

cmake

Tools/auterion: add Skynode upload scripts (#21842)

2023-08-21 08:03:07 +02:00

extras

px4iofirmware: don't switch to disarmed or failsafe value on disabled PWM outputs

2024-03-25 19:21:54 +01:00

init

Add minimal Skynode RC13 config to the PAB manifest

2024-03-04 13:33:20 -05:00

nuttx-config

boards: increase init stack size by 100B

2023-10-02 09:37:06 +02:00

src

px4_fmu-v5x:Use BOARD_HAS_HW_SPLIT_VERSIONING & common PAB manifest

2024-01-30 11:15:03 -05:00

default.px4board

boards/px4/fmu-v5x: remove legacy rover_pos_control to reduce flash usage

2024-03-22 15:17:03 -04:00

firmware.prototype

fmuv5x board support

2019-06-26 14:34:02 -04:00

rover.px4board

update all px4board kconfig

2024-02-09 10:48:26 -05:00

test.px4board

boards: remove camera capture and trigger from test builds

2023-07-24 13:10:31 +02:00