mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-10-24 10:23:33 +08:00
148 lines
4.6 KiB
YAML
148 lines
4.6 KiB
YAML
__max_num_config_instances: &max_num_config_instances 8
|
|
|
|
module_name: pwm_out
|
|
|
|
parameters:
|
|
- group: PWM Outputs
|
|
definitions:
|
|
|
|
PWM_AUX_RATE:
|
|
description:
|
|
short: PWM aux output frequency
|
|
long: |
|
|
Set to 400 for industry default or 1000 for high frequency ESCs.
|
|
Set to 0 for Oneshot125.
|
|
type: int32
|
|
unit: Hz
|
|
min: -1
|
|
max: 2000
|
|
default: 50
|
|
|
|
PWM_AUX_MIN:
|
|
description:
|
|
short: PWM aux minimum value
|
|
long: |
|
|
Set to 1000 for industry default or 900 to increase servo travel.
|
|
type: int32
|
|
unit: us
|
|
min: 800
|
|
max: 1400
|
|
default: 1000
|
|
|
|
PWM_AUX_MAX:
|
|
description:
|
|
short: PWM aux maximum value
|
|
long: |
|
|
Set to 2000 for industry default or 2100 to increase servo travel.
|
|
type: int32
|
|
unit: us
|
|
min: 1600
|
|
max: 2200
|
|
default: 2000
|
|
|
|
PWM_AUX_DISARM:
|
|
description:
|
|
short: PWM aux disarmed value
|
|
long: |
|
|
This is the PWM pulse the autopilot is outputting if not armed.
|
|
The main use of this parameter is to silence ESCs when they are disarmed.
|
|
type: int32
|
|
unit: us
|
|
min: 0
|
|
max: 2200
|
|
default: 1500
|
|
|
|
PWM_AUX_MIN${i}:
|
|
description:
|
|
short: PWM aux ${i} minimum value
|
|
long: |
|
|
This is the minimum PWM pulse the autopilot is allowed to output.
|
|
When set to -1 the value for PWM_AUX_MIN will be used
|
|
type: int32
|
|
unit: us
|
|
min: -1
|
|
max: 1600
|
|
num_instances: *max_num_config_instances
|
|
instance_start: 1
|
|
default: -1
|
|
|
|
PWM_AUX_MAX${i}:
|
|
description:
|
|
short: PWM aux ${i} maximum value
|
|
long: |
|
|
This is the maximum PWM pulse the autopilot is allowed to output.
|
|
When set to -1 the value for PWM_AUX_MAX will be used
|
|
type: int32
|
|
unit: us
|
|
min: -1
|
|
max: 2150
|
|
num_instances: *max_num_config_instances
|
|
instance_start: 1
|
|
default: -1
|
|
|
|
PWM_AUX_FAIL${i}:
|
|
description:
|
|
short: PWM aux ${i} failsafe value
|
|
long: |
|
|
This is the PWM pulse the autopilot is outputting if in failsafe mode.
|
|
When set to -1 the value is set automatically depending if the actuator
|
|
is a motor (900us) or a servo (1500us)
|
|
type: int32
|
|
unit: us
|
|
min: -1
|
|
max: 2150
|
|
num_instances: *max_num_config_instances
|
|
instance_start: 1
|
|
default: -1
|
|
|
|
PWM_AUX_DIS${i}:
|
|
description:
|
|
short: PWM aux ${i} disarmed value
|
|
long: |
|
|
This is the PWM pulse the autopilot is outputting if not armed.
|
|
When set to -1 the value for PWM_AUX_DISARM will be used
|
|
type: int32
|
|
unit: us
|
|
min: -1
|
|
max: 2150
|
|
num_instances: *max_num_config_instances
|
|
instance_start: 1
|
|
default: -1
|
|
|
|
PWM_AUX_TRIM${i}:
|
|
description:
|
|
short: PWM aux ${i} trim value
|
|
long: |
|
|
Set to normalized offset
|
|
type: float
|
|
min: -0.2
|
|
max: 0.2
|
|
decimal: 2
|
|
num_instances: *max_num_config_instances
|
|
instance_start: 1
|
|
default: 0
|
|
|
|
PWM_AUX_REV${i}:
|
|
description:
|
|
short: PWM aux ${i} reverse value
|
|
long: |
|
|
Enable to invert the channel.
|
|
Warning: Use this parameter when connected to a servo only.
|
|
For a brushless motor, invert manually two phases to reverse the direction.
|
|
type: boolean
|
|
num_instances: *max_num_config_instances
|
|
instance_start: 1
|
|
default: 0
|
|
|
|
PWM_AUX_RATE${i}:
|
|
description:
|
|
short: PWM aux ${i} rate
|
|
long: |
|
|
Set the default PWM output frequency for the aux outputs
|
|
type: int32
|
|
unit: Hz
|
|
min: 0
|
|
max: 400
|
|
instance_start: 1
|
|
default: 50
|