David Sidrane 73bb18a053 px4_fmu-v6x: Limit Slew rate So IMU works with DMA ...

The defualt in NuttX is OSPEED of 50Mhz. This is realy a slew
   rate control. At the default high slew rate the overshoot was
   .7 Volts. On a ICM20649 this was causing the device to output
   garbage. All 0s

   N.B. A passive scope or Logic analyser's probes load will mask
   the failure. Useed a FET probe to verify the issue.

2020-06-02 13:02:51 -04:00

..

aerotenna/ocpoc

commander: reboot/shutdown usability fixes

2020-05-06 13:53:54 -04:00

airmind/mindpx-v2

commander: reboot/shutdown usability fixes

2020-05-06 13:53:54 -04:00

atlflight

commander: reboot/shutdown usability fixes

2020-05-06 13:53:54 -04:00

av/x-v1

commander: changes when USB connected

2020-05-06 13:53:54 -04:00

beaglebone/blue

commander: reboot/shutdown usability fixes

2020-05-06 13:53:54 -04:00

bitcraze/crazyflie

Make all battery sensor drivers report their sample interval

2020-05-25 11:04:24 +02:00

cuav/x7pro

commander: reboot/shutdown usability fixes

2020-05-06 13:53:54 -04:00

emlid/navio2

commander: reboot/shutdown usability fixes

2020-05-06 13:53:54 -04:00

hex/cube-orange

Hex CubeOrange: fix comment for TONE_ALARM_CHANNEL pin

2020-05-29 23:44:17 +01:00

holybro

boards: holybro_durandal-v1_stackcheck don't build all mags

2020-05-07 15:21:15 -04:00

intel/aerofc-v1

commander: changes when USB connected

2020-05-06 13:53:54 -04:00

modalai/fc-v1

commander: reboot/shutdown usability fixes

2020-05-06 13:53:54 -04:00

mro

drivers/imu/invensense: new ICM20948 driver on SPI with AK09916 mag

2020-05-22 00:09:30 -04:00

nxp

commander: reboot/shutdown usability fixes

2020-05-06 13:53:54 -04:00

omnibus/f4sd

commander: changes when USB connected

2020-05-06 13:53:54 -04:00

px4

px4_fmu-v6x: Limit Slew rate So IMU works with DMA

2020-06-02 13:02:51 -04:00

uvify/core

commander: reboot/shutdown usability fixes

2020-05-06 13:53:54 -04:00