mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-04-14 10:07:39 +08:00
6225fae1d6
from 300 ms to 60 seconds, to give enough time for the user to configure the vehicle in the mean time. This is needed especially when the battery cell count setting is wrong (when it should be 3, but set to 4 for example), since then whenever you boot the vehicle, it will shutdown after 300 ms, which leaves the user puzzled as to exactly what's happening. And it also prevented the user from changing the Parameter since it's shutting down so quickly. 60 second window is intended to be a reasonable time that will allow the user to figure out what's going on (via checking the battery level on QGC, etc) but also not deep discharge the battery to a dangerous level.
4615 lines
167 KiB
C++
4615 lines
167 KiB
C++
/****************************************************************************
|
|
*
|
|
* Copyright (c) 2013-2022 PX4 Development Team. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name PX4 nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/**
|
|
* @file commander.cpp
|
|
*
|
|
* Main state machine / business logic
|
|
*
|
|
* @TODO This application is currently in a rewrite process. Main changes:
|
|
* - Calibration routines are moved into the event system
|
|
* - Commander is rewritten as class
|
|
* - State machines will be model driven
|
|
*/
|
|
|
|
#include "Commander.hpp"
|
|
|
|
/* commander module headers */
|
|
#include "Arming/PreFlightCheck/PreFlightCheck.hpp"
|
|
#include "Arming/ArmAuthorization/ArmAuthorization.h"
|
|
#include "Arming/HealthFlags/HealthFlags.h"
|
|
#include "commander_helper.h"
|
|
#include "esc_calibration.h"
|
|
#include "px4_custom_mode.h"
|
|
#include "state_machine_helper.h"
|
|
|
|
/* PX4 headers */
|
|
#include <dataman/dataman.h>
|
|
#include <drivers/drv_hrt.h>
|
|
#include <drivers/drv_tone_alarm.h>
|
|
#include <lib/geo/geo.h>
|
|
#include <mathlib/mathlib.h>
|
|
#include <navigator/navigation.h>
|
|
#include <px4_platform_common/events.h>
|
|
#include <px4_platform_common/px4_config.h>
|
|
#include <px4_platform_common/defines.h>
|
|
#include <px4_platform_common/external_reset_lockout.h>
|
|
#include <px4_platform_common/posix.h>
|
|
#include <px4_platform_common/shutdown.h>
|
|
#include <px4_platform_common/tasks.h>
|
|
#include <px4_platform_common/time.h>
|
|
#include <circuit_breaker/circuit_breaker.h>
|
|
#include <systemlib/mavlink_log.h>
|
|
|
|
#include <math.h>
|
|
#include <float.h>
|
|
#include <cstring>
|
|
#include <matrix/math.hpp>
|
|
|
|
#include <uORB/topics/mavlink_log.h>
|
|
#include <uORB/topics/tune_control.h>
|
|
|
|
typedef enum VEHICLE_MODE_FLAG {
|
|
VEHICLE_MODE_FLAG_CUSTOM_MODE_ENABLED = 1, /* 0b00000001 Reserved for future use. | */
|
|
VEHICLE_MODE_FLAG_TEST_ENABLED = 2, /* 0b00000010 system has a test mode enabled. This flag is intended for temporary system tests and should not be used for stable implementations. | */
|
|
VEHICLE_MODE_FLAG_AUTO_ENABLED = 4, /* 0b00000100 autonomous mode enabled, system finds its own goal positions. Guided flag can be set or not, depends on the actual implementation. | */
|
|
VEHICLE_MODE_FLAG_GUIDED_ENABLED = 8, /* 0b00001000 guided mode enabled, system flies MISSIONs / mission items. | */
|
|
VEHICLE_MODE_FLAG_STABILIZE_ENABLED = 16, /* 0b00010000 system stabilizes electronically its attitude (and optionally position). It needs however further control inputs to move around. | */
|
|
VEHICLE_MODE_FLAG_HIL_ENABLED = 32, /* 0b00100000 hardware in the loop simulation. All motors / actuators are blocked, but internal software is full operational. | */
|
|
VEHICLE_MODE_FLAG_MANUAL_INPUT_ENABLED = 64, /* 0b01000000 remote control input is enabled. | */
|
|
VEHICLE_MODE_FLAG_SAFETY_ARMED = 128, /* 0b10000000 MAV safety set to armed. Motors are enabled / running / can start. Ready to fly. Additional note: this flag is to be ignore when sent in the command MAV_CMD_DO_SET_MODE and MAV_CMD_COMPONENT_ARM_DISARM shall be used instead. The flag can still be used to report the armed state. | */
|
|
VEHICLE_MODE_FLAG_ENUM_END = 129, /* | */
|
|
} VEHICLE_MODE_FLAG;
|
|
|
|
// TODO: generate
|
|
static constexpr bool operator ==(const actuator_armed_s &a, const actuator_armed_s &b)
|
|
{
|
|
return (a.armed == b.armed &&
|
|
a.prearmed == b.prearmed &&
|
|
a.ready_to_arm == b.ready_to_arm &&
|
|
a.lockdown == b.lockdown &&
|
|
a.manual_lockdown == b.manual_lockdown &&
|
|
a.force_failsafe == b.force_failsafe &&
|
|
a.in_esc_calibration_mode == b.in_esc_calibration_mode &&
|
|
a.soft_stop == b.soft_stop);
|
|
}
|
|
static_assert(sizeof(actuator_armed_s) == 16, "actuator_armed equality operator review");
|
|
|
|
#if defined(BOARD_HAS_POWER_CONTROL)
|
|
static orb_advert_t tune_control_pub = nullptr;
|
|
static void play_power_button_down_tune()
|
|
{
|
|
tune_control_s tune_control{};
|
|
tune_control.volume = tune_control_s::VOLUME_LEVEL_DEFAULT;
|
|
tune_control.tune_id = tune_control_s::TUNE_ID_POWER_OFF;
|
|
tune_control.timestamp = hrt_absolute_time();
|
|
orb_publish(ORB_ID(tune_control), tune_control_pub, &tune_control);
|
|
}
|
|
|
|
static void stop_tune()
|
|
{
|
|
tune_control_s tune_control{};
|
|
tune_control.tune_override = true;
|
|
tune_control.timestamp = hrt_absolute_time();
|
|
orb_publish(ORB_ID(tune_control), tune_control_pub, &tune_control);
|
|
}
|
|
|
|
static orb_advert_t power_button_state_pub = nullptr;
|
|
static int power_button_state_notification_cb(board_power_button_state_notification_e request)
|
|
{
|
|
// Note: this can be called from IRQ handlers, so we publish a message that will be handled
|
|
// on the main thread of commander.
|
|
power_button_state_s button_state{};
|
|
button_state.timestamp = hrt_absolute_time();
|
|
const int ret = PWR_BUTTON_RESPONSE_SHUT_DOWN_PENDING;
|
|
|
|
switch (request) {
|
|
case PWR_BUTTON_IDEL:
|
|
button_state.event = power_button_state_s::PWR_BUTTON_STATE_IDEL;
|
|
break;
|
|
|
|
case PWR_BUTTON_DOWN:
|
|
button_state.event = power_button_state_s::PWR_BUTTON_STATE_DOWN;
|
|
play_power_button_down_tune();
|
|
break;
|
|
|
|
case PWR_BUTTON_UP:
|
|
button_state.event = power_button_state_s::PWR_BUTTON_STATE_UP;
|
|
stop_tune();
|
|
break;
|
|
|
|
case PWR_BUTTON_REQUEST_SHUT_DOWN:
|
|
button_state.event = power_button_state_s::PWR_BUTTON_STATE_REQUEST_SHUTDOWN;
|
|
break;
|
|
|
|
default:
|
|
PX4_ERR("unhandled power button state: %i", (int)request);
|
|
return ret;
|
|
}
|
|
|
|
if (power_button_state_pub != nullptr) {
|
|
orb_publish(ORB_ID(power_button_state), power_button_state_pub, &button_state);
|
|
|
|
} else {
|
|
PX4_ERR("power_button_state_pub not properly initialized");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif // BOARD_HAS_POWER_CONTROL
|
|
|
|
#ifndef CONSTRAINED_FLASH
|
|
static bool send_vehicle_command(const uint32_t cmd, const float param1 = NAN, const float param2 = NAN,
|
|
const float param3 = NAN, const float param4 = NAN, const double param5 = static_cast<double>(NAN),
|
|
const double param6 = static_cast<double>(NAN), const float param7 = NAN)
|
|
{
|
|
vehicle_command_s vcmd{};
|
|
vcmd.command = cmd;
|
|
vcmd.param1 = param1;
|
|
vcmd.param2 = param2;
|
|
vcmd.param3 = param3;
|
|
vcmd.param4 = param4;
|
|
vcmd.param5 = param5;
|
|
vcmd.param6 = param6;
|
|
vcmd.param7 = param7;
|
|
|
|
uORB::SubscriptionData<vehicle_status_s> vehicle_status_sub{ORB_ID(vehicle_status)};
|
|
vcmd.source_system = vehicle_status_sub.get().system_id;
|
|
vcmd.target_system = vehicle_status_sub.get().system_id;
|
|
vcmd.source_component = vehicle_status_sub.get().component_id;
|
|
vcmd.target_component = vehicle_status_sub.get().component_id;
|
|
|
|
uORB::Publication<vehicle_command_s> vcmd_pub{ORB_ID(vehicle_command)};
|
|
vcmd.timestamp = hrt_absolute_time();
|
|
return vcmd_pub.publish(vcmd);
|
|
}
|
|
|
|
static bool broadcast_vehicle_command(const uint32_t cmd, const float param1 = NAN, const float param2 = NAN,
|
|
const float param3 = NAN, const float param4 = NAN, const double param5 = static_cast<double>(NAN),
|
|
const double param6 = static_cast<double>(NAN), const float param7 = NAN)
|
|
{
|
|
vehicle_command_s vcmd{};
|
|
vcmd.command = cmd;
|
|
vcmd.param1 = param1;
|
|
vcmd.param2 = param2;
|
|
vcmd.param3 = param3;
|
|
vcmd.param4 = param4;
|
|
vcmd.param5 = param5;
|
|
vcmd.param6 = param6;
|
|
vcmd.param7 = param7;
|
|
|
|
uORB::SubscriptionData<vehicle_status_s> vehicle_status_sub{ORB_ID(vehicle_status)};
|
|
vcmd.source_system = vehicle_status_sub.get().system_id;
|
|
vcmd.target_system = 0;
|
|
vcmd.source_component = vehicle_status_sub.get().component_id;
|
|
vcmd.target_component = 0;
|
|
|
|
uORB::Publication<vehicle_command_s> vcmd_pub{ORB_ID(vehicle_command)};
|
|
vcmd.timestamp = hrt_absolute_time();
|
|
return vcmd_pub.publish(vcmd);
|
|
}
|
|
#endif
|
|
|
|
int Commander::custom_command(int argc, char *argv[])
|
|
{
|
|
if (!is_running()) {
|
|
print_usage("not running");
|
|
return 1;
|
|
}
|
|
|
|
#ifndef CONSTRAINED_FLASH
|
|
|
|
if (!strcmp(argv[0], "calibrate")) {
|
|
if (argc > 1) {
|
|
if (!strcmp(argv[1], "gyro")) {
|
|
// gyro calibration: param1 = 1
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_PREFLIGHT_CALIBRATION, 1.f, 0.f, 0.f, 0.f, 0.0, 0.0, 0.f);
|
|
|
|
} else if (!strcmp(argv[1], "mag")) {
|
|
if (argc > 2 && (strcmp(argv[2], "quick") == 0)) {
|
|
// magnetometer quick calibration: VEHICLE_CMD_FIXED_MAG_CAL_YAW
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_FIXED_MAG_CAL_YAW);
|
|
|
|
} else {
|
|
// magnetometer calibration: param2 = 1
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_PREFLIGHT_CALIBRATION, 0.f, 1.f, 0.f, 0.f, 0.0, 0.0, 0.f);
|
|
}
|
|
|
|
} else if (!strcmp(argv[1], "baro")) {
|
|
// baro calibration: param3 = 1
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_PREFLIGHT_CALIBRATION, 0.f, 0.f, 1.f, 0.f, 0.0, 0.0, 0.f);
|
|
|
|
} else if (!strcmp(argv[1], "accel")) {
|
|
if (argc > 2 && (strcmp(argv[2], "quick") == 0)) {
|
|
// accelerometer quick calibration: param5 = 3
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_PREFLIGHT_CALIBRATION, 0.f, 0.f, 0.f, 0.f, 4.0, 0.0, 0.f);
|
|
|
|
} else {
|
|
// accelerometer calibration: param5 = 1
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_PREFLIGHT_CALIBRATION, 0.f, 0.f, 0.f, 0.f, 1.0, 0.0, 0.f);
|
|
}
|
|
|
|
} else if (!strcmp(argv[1], "level")) {
|
|
// board level calibration: param5 = 2
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_PREFLIGHT_CALIBRATION, 0.f, 0.f, 0.f, 0.f, 2.0, 0.0, 0.f);
|
|
|
|
} else if (!strcmp(argv[1], "airspeed")) {
|
|
// airspeed calibration: param6 = 2
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_PREFLIGHT_CALIBRATION, 0.f, 0.f, 0.f, 0.f, 0.0, 2.0, 0.f);
|
|
|
|
} else if (!strcmp(argv[1], "esc")) {
|
|
// ESC calibration: param7 = 1
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_PREFLIGHT_CALIBRATION, 0.f, 0.f, 0.f, 0.f, 0.0, 0.0, 1.f);
|
|
|
|
} else {
|
|
PX4_ERR("argument %s unsupported.", argv[1]);
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
|
|
} else {
|
|
PX4_ERR("missing argument");
|
|
}
|
|
}
|
|
|
|
if (!strcmp(argv[0], "check")) {
|
|
uORB::Subscription vehicle_status_sub{ORB_ID(vehicle_status)};
|
|
vehicle_status_s vehicle_status{};
|
|
vehicle_status_sub.copy(&vehicle_status);
|
|
|
|
uORB::Subscription vehicle_status_flags_sub{ORB_ID(vehicle_status_flags)};
|
|
vehicle_status_flags_s vehicle_status_flags{};
|
|
vehicle_status_flags_sub.copy(&vehicle_status_flags);
|
|
|
|
uORB::Subscription vehicle_control_mode_sub{ORB_ID(vehicle_control_mode)};
|
|
vehicle_control_mode_s vehicle_control_mode{};
|
|
vehicle_control_mode_sub.copy(&vehicle_control_mode);
|
|
|
|
bool preflight_check_res = PreFlightCheck::preflightCheck(nullptr, vehicle_status, vehicle_status_flags,
|
|
vehicle_control_mode,
|
|
true, // report_failures
|
|
false, // safety_buttton_available not known
|
|
false); // safety_off not known
|
|
PX4_INFO("Preflight check: %s", preflight_check_res ? "OK" : "FAILED");
|
|
|
|
print_health_flags(vehicle_status);
|
|
|
|
return 0;
|
|
}
|
|
|
|
if (!strcmp(argv[0], "arm")) {
|
|
float param2 = 0.f;
|
|
|
|
// 21196: force arming/disarming (e.g. allow arming to override preflight checks and disarming in flight)
|
|
if (argc > 1 && !strcmp(argv[1], "-f")) {
|
|
param2 = 21196.f;
|
|
}
|
|
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_COMPONENT_ARM_DISARM,
|
|
static_cast<float>(vehicle_command_s::ARMING_ACTION_ARM),
|
|
param2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
if (!strcmp(argv[0], "disarm")) {
|
|
float param2 = 0.f;
|
|
|
|
// 21196: force arming/disarming (e.g. allow arming to override preflight checks and disarming in flight)
|
|
if (argc > 1 && !strcmp(argv[1], "-f")) {
|
|
param2 = 21196.f;
|
|
}
|
|
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_COMPONENT_ARM_DISARM,
|
|
static_cast<float>(vehicle_command_s::ARMING_ACTION_DISARM),
|
|
param2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
if (!strcmp(argv[0], "takeoff")) {
|
|
// switch to takeoff mode and arm
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_NAV_TAKEOFF);
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_COMPONENT_ARM_DISARM,
|
|
static_cast<float>(vehicle_command_s::ARMING_ACTION_ARM),
|
|
0.f);
|
|
|
|
return 0;
|
|
}
|
|
|
|
if (!strcmp(argv[0], "land")) {
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_NAV_LAND);
|
|
|
|
return 0;
|
|
}
|
|
|
|
if (!strcmp(argv[0], "transition")) {
|
|
uORB::Subscription vehicle_status_sub{ORB_ID(vehicle_status)};
|
|
vehicle_status_s vehicle_status{};
|
|
vehicle_status_sub.copy(&vehicle_status);
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_DO_VTOL_TRANSITION,
|
|
(float)(vehicle_status.vehicle_type == vehicle_status_s::VEHICLE_TYPE_ROTARY_WING ?
|
|
vtol_vehicle_status_s::VEHICLE_VTOL_STATE_FW :
|
|
vtol_vehicle_status_s::VEHICLE_VTOL_STATE_MC), 0.0f);
|
|
|
|
return 0;
|
|
}
|
|
|
|
if (!strcmp(argv[0], "mode")) {
|
|
if (argc > 1) {
|
|
|
|
if (!strcmp(argv[1], "manual")) {
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_DO_SET_MODE, 1, PX4_CUSTOM_MAIN_MODE_MANUAL);
|
|
|
|
} else if (!strcmp(argv[1], "altctl")) {
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_DO_SET_MODE, 1, PX4_CUSTOM_MAIN_MODE_ALTCTL);
|
|
|
|
} else if (!strcmp(argv[1], "posctl")) {
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_DO_SET_MODE, 1, PX4_CUSTOM_MAIN_MODE_POSCTL);
|
|
|
|
} else if (!strcmp(argv[1], "auto:mission")) {
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_DO_SET_MODE, 1, PX4_CUSTOM_MAIN_MODE_AUTO,
|
|
PX4_CUSTOM_SUB_MODE_AUTO_MISSION);
|
|
|
|
} else if (!strcmp(argv[1], "auto:loiter")) {
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_DO_SET_MODE, 1, PX4_CUSTOM_MAIN_MODE_AUTO,
|
|
PX4_CUSTOM_SUB_MODE_AUTO_LOITER);
|
|
|
|
} else if (!strcmp(argv[1], "auto:rtl")) {
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_DO_SET_MODE, 1, PX4_CUSTOM_MAIN_MODE_AUTO,
|
|
PX4_CUSTOM_SUB_MODE_AUTO_RTL);
|
|
|
|
} else if (!strcmp(argv[1], "acro")) {
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_DO_SET_MODE, 1, PX4_CUSTOM_MAIN_MODE_ACRO);
|
|
|
|
} else if (!strcmp(argv[1], "offboard")) {
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_DO_SET_MODE, 1, PX4_CUSTOM_MAIN_MODE_OFFBOARD);
|
|
|
|
} else if (!strcmp(argv[1], "stabilized")) {
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_DO_SET_MODE, 1, PX4_CUSTOM_MAIN_MODE_STABILIZED);
|
|
|
|
} else if (!strcmp(argv[1], "auto:takeoff")) {
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_DO_SET_MODE, 1, PX4_CUSTOM_MAIN_MODE_AUTO,
|
|
PX4_CUSTOM_SUB_MODE_AUTO_TAKEOFF);
|
|
|
|
} else if (!strcmp(argv[1], "auto:land")) {
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_DO_SET_MODE, 1, PX4_CUSTOM_MAIN_MODE_AUTO,
|
|
PX4_CUSTOM_SUB_MODE_AUTO_LAND);
|
|
|
|
} else if (!strcmp(argv[1], "auto:precland")) {
|
|
send_vehicle_command(vehicle_command_s::VEHICLE_CMD_DO_SET_MODE, 1, PX4_CUSTOM_MAIN_MODE_AUTO,
|
|
PX4_CUSTOM_SUB_MODE_AUTO_PRECLAND);
|
|
|
|
} else {
|
|
PX4_ERR("argument %s unsupported.", argv[1]);
|
|
}
|
|
|
|
return 0;
|
|
|
|
} else {
|
|
PX4_ERR("missing argument");
|
|
}
|
|
}
|
|
|
|
if (!strcmp(argv[0], "lockdown")) {
|
|
|
|
if (argc < 2) {
|
|
Commander::print_usage("not enough arguments, missing [on, off]");
|
|
return 1;
|
|
}
|
|
|
|
bool ret = send_vehicle_command(vehicle_command_s::VEHICLE_CMD_DO_FLIGHTTERMINATION,
|
|
strcmp(argv[1], "off") ? 2.0f : 0.0f /* lockdown */, 0.0f);
|
|
|
|
return (ret ? 0 : 1);
|
|
}
|
|
|
|
if (!strcmp(argv[0], "pair")) {
|
|
|
|
// GCS pairing request handled by a companion
|
|
bool ret = broadcast_vehicle_command(vehicle_command_s::VEHICLE_CMD_START_RX_PAIR, 10.f);
|
|
|
|
return (ret ? 0 : 1);
|
|
}
|
|
|
|
if (!strcmp(argv[0], "set_ekf_origin")) {
|
|
if (argc > 3) {
|
|
|
|
double latitude = atof(argv[1]);
|
|
double longitude = atof(argv[2]);
|
|
float altitude = atof(argv[3]);
|
|
|
|
// Set the ekf NED origin global coordinates.
|
|
bool ret = send_vehicle_command(vehicle_command_s::VEHICLE_CMD_SET_GPS_GLOBAL_ORIGIN,
|
|
0.f, 0.f, 0.0, 0.0, latitude, longitude, altitude);
|
|
return (ret ? 0 : 1);
|
|
|
|
} else {
|
|
PX4_ERR("missing argument");
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
if (!strcmp(argv[0], "poweroff")) {
|
|
|
|
bool ret = send_vehicle_command(vehicle_command_s::VEHICLE_CMD_PREFLIGHT_REBOOT_SHUTDOWN,
|
|
2.0f);
|
|
|
|
return (ret ? 0 : 1);
|
|
}
|
|
|
|
|
|
#endif
|
|
|
|
return print_usage("unknown command");
|
|
}
|
|
|
|
int Commander::print_status()
|
|
{
|
|
PX4_INFO("Arm state: %s", _arm_state_machine.getArmStateName());
|
|
PX4_INFO("navigation: %s", nav_state_names[_vehicle_status.nav_state]);
|
|
perf_print_counter(_loop_perf);
|
|
perf_print_counter(_preflight_check_perf);
|
|
return 0;
|
|
}
|
|
|
|
extern "C" __EXPORT int commander_main(int argc, char *argv[])
|
|
{
|
|
return Commander::main(argc, argv);
|
|
}
|
|
|
|
bool Commander::shutdown_if_allowed()
|
|
{
|
|
return TRANSITION_DENIED != _arm_state_machine.arming_state_transition(_vehicle_status, _vehicle_control_mode,
|
|
_safety.isButtonAvailable(), _safety.isSafetyOff(),
|
|
vehicle_status_s::ARMING_STATE_SHUTDOWN,
|
|
_actuator_armed, false /* fRunPreArmChecks */, &_mavlink_log_pub, _vehicle_status_flags,
|
|
arm_disarm_reason_t::shutdown);
|
|
}
|
|
|
|
static constexpr const char *arm_disarm_reason_str(arm_disarm_reason_t calling_reason)
|
|
{
|
|
switch (calling_reason) {
|
|
case arm_disarm_reason_t::transition_to_standby: return "";
|
|
|
|
case arm_disarm_reason_t::rc_stick: return "RC";
|
|
|
|
case arm_disarm_reason_t::rc_switch: return "RC (switch)";
|
|
|
|
case arm_disarm_reason_t::command_internal: return "internal command";
|
|
|
|
case arm_disarm_reason_t::command_external: return "external command";
|
|
|
|
case arm_disarm_reason_t::mission_start: return "mission start";
|
|
|
|
case arm_disarm_reason_t::auto_disarm_land: return "landing";
|
|
|
|
case arm_disarm_reason_t::auto_disarm_preflight: return "auto preflight disarming";
|
|
|
|
case arm_disarm_reason_t::kill_switch: return "kill-switch";
|
|
|
|
case arm_disarm_reason_t::lockdown: return "lockdown";
|
|
|
|
case arm_disarm_reason_t::failure_detector: return "failure detector";
|
|
|
|
case arm_disarm_reason_t::shutdown: return "shutdown request";
|
|
|
|
case arm_disarm_reason_t::unit_test: return "unit tests";
|
|
|
|
case arm_disarm_reason_t::rc_button: return "RC (button)";
|
|
}
|
|
|
|
return "";
|
|
};
|
|
|
|
using battery_fault_reason_t = events::px4::enums::battery_fault_reason_t;
|
|
static_assert(battery_status_s::BATTERY_FAULT_COUNT == (static_cast<uint8_t>(battery_fault_reason_t::_max) + 1)
|
|
, "Battery fault flags mismatch!");
|
|
|
|
static constexpr const char *battery_fault_reason_str(battery_fault_reason_t battery_fault_reason)
|
|
{
|
|
switch (battery_fault_reason) {
|
|
case battery_fault_reason_t::deep_discharge: return "under voltage";
|
|
|
|
case battery_fault_reason_t::voltage_spikes: return "over voltage";
|
|
|
|
case battery_fault_reason_t::cell_fail: return "cell fault";
|
|
|
|
case battery_fault_reason_t::over_current: return "over current";
|
|
|
|
case battery_fault_reason_t::fault_temperature: return "critical temperature";
|
|
|
|
case battery_fault_reason_t::under_temperature: return "under temperature";
|
|
|
|
case battery_fault_reason_t::incompatible_voltage: return "voltage mismatch";
|
|
|
|
case battery_fault_reason_t::incompatible_firmware: return "incompatible firmware";
|
|
|
|
case battery_fault_reason_t::incompatible_model: return "incompatible model";
|
|
|
|
case battery_fault_reason_t::hardware_fault: return "hardware fault";
|
|
|
|
case battery_fault_reason_t::over_temperature: return "near temperature limit";
|
|
|
|
}
|
|
|
|
return "";
|
|
};
|
|
|
|
using battery_mode_t = events::px4::enums::battery_mode_t;
|
|
static_assert(battery_status_s::BATTERY_MODE_COUNT == (static_cast<uint8_t>(battery_mode_t::_max) + 1)
|
|
, "Battery mode flags mismatch!");
|
|
static constexpr const char *battery_mode_str(battery_mode_t battery_mode)
|
|
{
|
|
switch (battery_mode) {
|
|
case battery_mode_t::autodischarging: return "auto discharging";
|
|
|
|
case battery_mode_t::hotswap: return "hot-swap";
|
|
|
|
default: return "unknown";
|
|
}
|
|
}
|
|
|
|
using esc_fault_reason_t = events::px4::enums::esc_fault_reason_t;
|
|
static_assert(esc_report_s::ESC_FAILURE_COUNT == (static_cast<uint8_t>(esc_fault_reason_t::_max) + 1)
|
|
, "ESC fault flags mismatch!");
|
|
static constexpr const char *esc_fault_reason_str(esc_fault_reason_t esc_fault_reason)
|
|
{
|
|
switch (esc_fault_reason) {
|
|
case esc_fault_reason_t::over_current: return "over current";
|
|
|
|
case esc_fault_reason_t::over_voltage: return "over voltage";
|
|
|
|
case esc_fault_reason_t::motor_over_temp: return "motor critical temperature";
|
|
|
|
case esc_fault_reason_t::over_rpm: return "over RPM";
|
|
|
|
case esc_fault_reason_t::inconsistent_cmd: return "control failure";
|
|
|
|
case esc_fault_reason_t::motor_stuck: return "motor stall";
|
|
|
|
case esc_fault_reason_t::failure_generic: return "hardware failure";
|
|
|
|
case esc_fault_reason_t::motor_warn_temp: return "motor over temperature";
|
|
|
|
case esc_fault_reason_t::esc_warn_temp: return "over temperature";
|
|
|
|
case esc_fault_reason_t::esc_over_temp: return "critical temperature";
|
|
|
|
}
|
|
|
|
return "";
|
|
};
|
|
|
|
|
|
|
|
using navigation_mode_t = events::px4::enums::navigation_mode_t;
|
|
|
|
static inline navigation_mode_t navigation_mode(uint8_t main_state)
|
|
{
|
|
switch (main_state) {
|
|
case commander_state_s::MAIN_STATE_MANUAL: return navigation_mode_t::manual;
|
|
|
|
case commander_state_s::MAIN_STATE_ALTCTL: return navigation_mode_t::altctl;
|
|
|
|
case commander_state_s::MAIN_STATE_POSCTL: return navigation_mode_t::posctl;
|
|
|
|
case commander_state_s::MAIN_STATE_AUTO_MISSION: return navigation_mode_t::auto_mission;
|
|
|
|
case commander_state_s::MAIN_STATE_AUTO_LOITER: return navigation_mode_t::auto_loiter;
|
|
|
|
case commander_state_s::MAIN_STATE_AUTO_RTL: return navigation_mode_t::auto_rtl;
|
|
|
|
case commander_state_s::MAIN_STATE_ACRO: return navigation_mode_t::acro;
|
|
|
|
case commander_state_s::MAIN_STATE_OFFBOARD: return navigation_mode_t::offboard;
|
|
|
|
case commander_state_s::MAIN_STATE_STAB: return navigation_mode_t::stab;
|
|
|
|
case commander_state_s::MAIN_STATE_AUTO_TAKEOFF: return navigation_mode_t::auto_takeoff;
|
|
|
|
case commander_state_s::MAIN_STATE_AUTO_LAND: return navigation_mode_t::auto_land;
|
|
|
|
case commander_state_s::MAIN_STATE_AUTO_FOLLOW_TARGET: return navigation_mode_t::auto_follow_target;
|
|
|
|
case commander_state_s::MAIN_STATE_AUTO_PRECLAND: return navigation_mode_t::auto_precland;
|
|
|
|
case commander_state_s::MAIN_STATE_ORBIT: return navigation_mode_t::orbit;
|
|
|
|
case commander_state_s::MAIN_STATE_AUTO_VTOL_TAKEOFF: return navigation_mode_t::auto_vtol_takeoff;
|
|
}
|
|
|
|
static_assert(commander_state_s::MAIN_STATE_MAX - 1 == (int)navigation_mode_t::auto_vtol_takeoff,
|
|
"enum definition mismatch");
|
|
|
|
return navigation_mode_t::unknown;
|
|
}
|
|
|
|
static constexpr const char *main_state_str(uint8_t main_state)
|
|
{
|
|
switch (main_state) {
|
|
case commander_state_s::MAIN_STATE_MANUAL: return "Manual";
|
|
|
|
case commander_state_s::MAIN_STATE_ALTCTL: return "Altitude";
|
|
|
|
case commander_state_s::MAIN_STATE_POSCTL: return "Position";
|
|
|
|
case commander_state_s::MAIN_STATE_AUTO_MISSION: return "Mission";
|
|
|
|
case commander_state_s::MAIN_STATE_AUTO_LOITER: return "Hold";
|
|
|
|
case commander_state_s::MAIN_STATE_AUTO_RTL: return "RTL";
|
|
|
|
case commander_state_s::MAIN_STATE_ACRO: return "Acro";
|
|
|
|
case commander_state_s::MAIN_STATE_OFFBOARD: return "Offboard";
|
|
|
|
case commander_state_s::MAIN_STATE_STAB: return "Stabilized";
|
|
|
|
case commander_state_s::MAIN_STATE_AUTO_TAKEOFF: return "Takeoff";
|
|
|
|
case commander_state_s::MAIN_STATE_AUTO_LAND: return "Land";
|
|
|
|
case commander_state_s::MAIN_STATE_AUTO_FOLLOW_TARGET: return "Follow target";
|
|
|
|
case commander_state_s::MAIN_STATE_AUTO_PRECLAND: return "Precision land";
|
|
|
|
case commander_state_s::MAIN_STATE_ORBIT: return "Orbit";
|
|
|
|
default: return "Unknown";
|
|
}
|
|
}
|
|
|
|
transition_result_t Commander::arm(arm_disarm_reason_t calling_reason, bool run_preflight_checks)
|
|
{
|
|
// allow a grace period for re-arming: preflight checks don't need to pass during that time, for example for accidential in-air disarming
|
|
if (calling_reason == arm_disarm_reason_t::rc_switch
|
|
&& (hrt_elapsed_time(&_last_disarmed_timestamp) < 5_s)) {
|
|
run_preflight_checks = false;
|
|
}
|
|
|
|
if (run_preflight_checks && !_arm_state_machine.isArmed()) {
|
|
if (_vehicle_control_mode.flag_control_manual_enabled) {
|
|
if (_vehicle_control_mode.flag_control_climb_rate_enabled &&
|
|
!_vehicle_status.rc_signal_lost && _is_throttle_above_center) {
|
|
mavlink_log_critical(&_mavlink_log_pub, "Arming denied: throttle above center\t");
|
|
events::send(events::ID("commander_arm_denied_throttle_center"),
|
|
{events::Log::Critical, events::LogInternal::Info},
|
|
"Arming denied: throttle above center");
|
|
tune_negative(true);
|
|
return TRANSITION_DENIED;
|
|
}
|
|
|
|
if (!_vehicle_control_mode.flag_control_climb_rate_enabled &&
|
|
!_vehicle_status.rc_signal_lost && !_is_throttle_low
|
|
&& _vehicle_status.vehicle_type != vehicle_status_s::VEHICLE_TYPE_ROVER) {
|
|
mavlink_log_critical(&_mavlink_log_pub, "Arming denied: high throttle\t");
|
|
events::send(events::ID("commander_arm_denied_throttle_high"),
|
|
{events::Log::Critical, events::LogInternal::Info},
|
|
"Arming denied: high throttle");
|
|
tune_negative(true);
|
|
return TRANSITION_DENIED;
|
|
}
|
|
|
|
} else if (calling_reason == arm_disarm_reason_t::rc_stick
|
|
|| calling_reason == arm_disarm_reason_t::rc_switch
|
|
|| calling_reason == arm_disarm_reason_t::rc_button) {
|
|
mavlink_log_critical(&_mavlink_log_pub, "Arming denied: switch to manual mode first\t");
|
|
events::send(events::ID("commander_arm_denied_not_manual"),
|
|
{events::Log::Critical, events::LogInternal::Info},
|
|
"Arming denied: switch to manual mode first");
|
|
tune_negative(true);
|
|
return TRANSITION_DENIED;
|
|
}
|
|
|
|
if ((_geofence_result.geofence_action == geofence_result_s::GF_ACTION_RTL)
|
|
&& !_vehicle_status_flags.home_position_valid) {
|
|
mavlink_log_critical(&_mavlink_log_pub, "Arming denied: Geofence RTL requires valid home\t");
|
|
events::send(events::ID("commander_arm_denied_geofence_rtl"),
|
|
{events::Log::Critical, events::LogInternal::Info},
|
|
"Arming denied: Geofence RTL requires valid home");
|
|
tune_negative(true);
|
|
return TRANSITION_DENIED;
|
|
}
|
|
}
|
|
|
|
transition_result_t arming_res = _arm_state_machine.arming_state_transition(_vehicle_status, _vehicle_control_mode,
|
|
_safety.isButtonAvailable(), _safety.isSafetyOff(),
|
|
vehicle_status_s::ARMING_STATE_ARMED, _actuator_armed, run_preflight_checks,
|
|
&_mavlink_log_pub, _vehicle_status_flags,
|
|
calling_reason);
|
|
|
|
if (arming_res == TRANSITION_CHANGED) {
|
|
mavlink_log_info(&_mavlink_log_pub, "Armed by %s\t", arm_disarm_reason_str(calling_reason));
|
|
events::send<events::px4::enums::arm_disarm_reason_t>(events::ID("commander_armed_by"), events::Log::Info,
|
|
"Armed by {1}", calling_reason);
|
|
|
|
_status_changed = true;
|
|
|
|
} else if (arming_res == TRANSITION_DENIED) {
|
|
tune_negative(true);
|
|
}
|
|
|
|
return arming_res;
|
|
}
|
|
|
|
transition_result_t Commander::disarm(arm_disarm_reason_t calling_reason, bool forced)
|
|
{
|
|
if (!forced) {
|
|
const bool landed = (_vehicle_land_detected.landed || _vehicle_land_detected.maybe_landed
|
|
|| is_ground_rover(_vehicle_status));
|
|
const bool mc_manual_thrust_mode = _vehicle_status.vehicle_type == vehicle_status_s::VEHICLE_TYPE_ROTARY_WING
|
|
&& _vehicle_control_mode.flag_control_manual_enabled
|
|
&& !_vehicle_control_mode.flag_control_climb_rate_enabled;
|
|
const bool commanded_by_rc = (calling_reason == arm_disarm_reason_t::rc_stick)
|
|
|| (calling_reason == arm_disarm_reason_t::rc_switch)
|
|
|| (calling_reason == arm_disarm_reason_t::rc_button);
|
|
|
|
if (!landed && !(mc_manual_thrust_mode && commanded_by_rc)) {
|
|
if (calling_reason != arm_disarm_reason_t::rc_stick) {
|
|
mavlink_log_critical(&_mavlink_log_pub, "Disarming denied! Not landed\t");
|
|
events::send(events::ID("commander_disarming_denied_not_landed"),
|
|
{events::Log::Critical, events::LogInternal::Info},
|
|
"Disarming denied, not landed");
|
|
}
|
|
|
|
return TRANSITION_DENIED;
|
|
}
|
|
}
|
|
|
|
transition_result_t arming_res = _arm_state_machine.arming_state_transition(_vehicle_status, _vehicle_control_mode,
|
|
_safety.isButtonAvailable(), _safety.isSafetyOff(),
|
|
vehicle_status_s::ARMING_STATE_STANDBY, _actuator_armed, false,
|
|
&_mavlink_log_pub, _vehicle_status_flags,
|
|
calling_reason);
|
|
|
|
if (arming_res == TRANSITION_CHANGED) {
|
|
mavlink_log_info(&_mavlink_log_pub, "Disarmed by %s\t", arm_disarm_reason_str(calling_reason));
|
|
events::send<events::px4::enums::arm_disarm_reason_t>(events::ID("commander_disarmed_by"), events::Log::Info,
|
|
"Disarmed by {1}", calling_reason);
|
|
|
|
if (_param_com_force_safety.get()) {
|
|
_safety.activateSafety();
|
|
}
|
|
|
|
_status_changed = true;
|
|
|
|
} else if (arming_res == TRANSITION_DENIED) {
|
|
tune_negative(true);
|
|
}
|
|
|
|
return arming_res;
|
|
}
|
|
|
|
Commander::Commander() :
|
|
ModuleParams(nullptr),
|
|
_failure_detector(this)
|
|
{
|
|
_vehicle_land_detected.landed = true;
|
|
|
|
_vehicle_status.system_id = 1;
|
|
_vehicle_status.component_id = 1;
|
|
|
|
_vehicle_status.system_type = 0;
|
|
_vehicle_status.vehicle_type = vehicle_status_s::VEHICLE_TYPE_UNKNOWN;
|
|
|
|
// We want to accept RC inputs as default
|
|
_vehicle_status.nav_state = vehicle_status_s::NAVIGATION_STATE_MANUAL;
|
|
_vehicle_status.nav_state_timestamp = hrt_absolute_time();
|
|
|
|
/* mark all signals lost as long as they haven't been found */
|
|
_vehicle_status.rc_signal_lost = true;
|
|
_vehicle_status.data_link_lost = true;
|
|
|
|
_vehicle_status_flags.offboard_control_signal_lost = true;
|
|
|
|
_vehicle_status_flags.power_input_valid = true;
|
|
|
|
// default for vtol is rotary wing
|
|
_vtol_vehicle_status.vehicle_vtol_state = vtol_vehicle_status_s::VEHICLE_VTOL_STATE_MC;
|
|
|
|
_vehicle_gps_position_valid.set_hysteresis_time_from(false, GPS_VALID_TIME);
|
|
_vehicle_gps_position_valid.set_hysteresis_time_from(true, GPS_VALID_TIME);
|
|
|
|
_param_mav_comp_id = param_find("MAV_COMP_ID");
|
|
_param_mav_sys_id = param_find("MAV_SYS_ID");
|
|
_param_mav_type = param_find("MAV_TYPE");
|
|
_param_rc_map_fltmode = param_find("RC_MAP_FLTMODE");
|
|
|
|
updateParameters();
|
|
|
|
// run preflight immediately to find all relevant parameters, but don't report
|
|
PreFlightCheck::preflightCheck(&_mavlink_log_pub, _vehicle_status, _vehicle_status_flags, _vehicle_control_mode,
|
|
false, // report_failures
|
|
false, // safety_buttton_available not known
|
|
false); // safety_off not known
|
|
}
|
|
|
|
Commander::~Commander()
|
|
{
|
|
perf_free(_loop_perf);
|
|
perf_free(_preflight_check_perf);
|
|
}
|
|
|
|
bool
|
|
Commander::handle_command(const vehicle_command_s &cmd)
|
|
{
|
|
/* only handle commands that are meant to be handled by this system and component, or broadcast */
|
|
if (((cmd.target_system != _vehicle_status.system_id) && (cmd.target_system != 0))
|
|
|| ((cmd.target_component != _vehicle_status.component_id) && (cmd.target_component != 0))) {
|
|
return false;
|
|
}
|
|
|
|
/* result of the command */
|
|
unsigned cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_UNSUPPORTED;
|
|
|
|
/* request to set different system mode */
|
|
switch (cmd.command) {
|
|
case vehicle_command_s::VEHICLE_CMD_DO_REPOSITION: {
|
|
|
|
// Just switch the flight mode here, the navigator takes care of
|
|
// doing something sensible with the coordinates. Its designed
|
|
// to not require navigator and command to receive / process
|
|
// the data at the exact same time.
|
|
|
|
// Check if a mode switch had been requested
|
|
if ((((uint32_t)cmd.param2) & 1) > 0) {
|
|
transition_result_t main_ret = main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_AUTO_LOITER,
|
|
_vehicle_status_flags, _commander_state);
|
|
|
|
if ((main_ret != TRANSITION_DENIED)) {
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED;
|
|
|
|
} else {
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED;
|
|
mavlink_log_critical(&_mavlink_log_pub, "Reposition command rejected\t");
|
|
/* EVENT
|
|
* @description Check for a valid position estimate
|
|
*/
|
|
events::send(events::ID("commander_reposition_rejected"),
|
|
{events::Log::Error, events::LogInternal::Info},
|
|
"Reposition command rejected");
|
|
}
|
|
|
|
} else {
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_DO_SET_MODE: {
|
|
uint8_t base_mode = (uint8_t)cmd.param1;
|
|
uint8_t custom_main_mode = (uint8_t)cmd.param2;
|
|
uint8_t custom_sub_mode = (uint8_t)cmd.param3;
|
|
|
|
uint8_t desired_main_state = commander_state_s::MAIN_STATE_MAX;
|
|
transition_result_t main_ret = TRANSITION_NOT_CHANGED;
|
|
|
|
if (base_mode & VEHICLE_MODE_FLAG_CUSTOM_MODE_ENABLED) {
|
|
/* use autopilot-specific mode */
|
|
if (custom_main_mode == PX4_CUSTOM_MAIN_MODE_MANUAL) {
|
|
desired_main_state = commander_state_s::MAIN_STATE_MANUAL;
|
|
|
|
} else if (custom_main_mode == PX4_CUSTOM_MAIN_MODE_ALTCTL) {
|
|
desired_main_state = commander_state_s::MAIN_STATE_ALTCTL;
|
|
|
|
} else if (custom_main_mode == PX4_CUSTOM_MAIN_MODE_POSCTL) {
|
|
desired_main_state = commander_state_s::MAIN_STATE_POSCTL;
|
|
|
|
} else if (custom_main_mode == PX4_CUSTOM_MAIN_MODE_AUTO) {
|
|
if (custom_sub_mode > 0) {
|
|
|
|
switch (custom_sub_mode) {
|
|
case PX4_CUSTOM_SUB_MODE_AUTO_LOITER:
|
|
desired_main_state = commander_state_s::MAIN_STATE_AUTO_LOITER;
|
|
break;
|
|
|
|
case PX4_CUSTOM_SUB_MODE_AUTO_MISSION:
|
|
desired_main_state = commander_state_s::MAIN_STATE_AUTO_MISSION;
|
|
break;
|
|
|
|
case PX4_CUSTOM_SUB_MODE_AUTO_RTL:
|
|
desired_main_state = commander_state_s::MAIN_STATE_AUTO_RTL;
|
|
break;
|
|
|
|
case PX4_CUSTOM_SUB_MODE_AUTO_TAKEOFF:
|
|
desired_main_state = commander_state_s::MAIN_STATE_AUTO_TAKEOFF;
|
|
break;
|
|
|
|
case PX4_CUSTOM_SUB_MODE_AUTO_LAND:
|
|
desired_main_state = commander_state_s::MAIN_STATE_AUTO_LAND;
|
|
break;
|
|
|
|
case PX4_CUSTOM_SUB_MODE_AUTO_FOLLOW_TARGET:
|
|
desired_main_state = commander_state_s::MAIN_STATE_AUTO_FOLLOW_TARGET;
|
|
break;
|
|
|
|
case PX4_CUSTOM_SUB_MODE_AUTO_PRECLAND:
|
|
desired_main_state = commander_state_s::MAIN_STATE_AUTO_PRECLAND;
|
|
break;
|
|
|
|
default:
|
|
main_ret = TRANSITION_DENIED;
|
|
mavlink_log_critical(&_mavlink_log_pub, "Unsupported auto mode\t");
|
|
events::send(events::ID("commander_unsupported_auto_mode"), events::Log::Error,
|
|
"Unsupported auto mode");
|
|
break;
|
|
}
|
|
|
|
} else {
|
|
desired_main_state = commander_state_s::MAIN_STATE_AUTO_MISSION;
|
|
}
|
|
|
|
} else if (custom_main_mode == PX4_CUSTOM_MAIN_MODE_ACRO) {
|
|
desired_main_state = commander_state_s::MAIN_STATE_ACRO;
|
|
|
|
} else if (custom_main_mode == PX4_CUSTOM_MAIN_MODE_STABILIZED) {
|
|
desired_main_state = commander_state_s::MAIN_STATE_STAB;
|
|
|
|
} else if (custom_main_mode == PX4_CUSTOM_MAIN_MODE_OFFBOARD) {
|
|
desired_main_state = commander_state_s::MAIN_STATE_OFFBOARD;
|
|
}
|
|
|
|
} else {
|
|
/* use base mode */
|
|
if (base_mode & VEHICLE_MODE_FLAG_AUTO_ENABLED) {
|
|
desired_main_state = commander_state_s::MAIN_STATE_AUTO_MISSION;
|
|
|
|
} else if (base_mode & VEHICLE_MODE_FLAG_MANUAL_INPUT_ENABLED) {
|
|
if (base_mode & VEHICLE_MODE_FLAG_GUIDED_ENABLED) {
|
|
desired_main_state = commander_state_s::MAIN_STATE_POSCTL;
|
|
|
|
} else if (base_mode & VEHICLE_MODE_FLAG_STABILIZE_ENABLED) {
|
|
desired_main_state = commander_state_s::MAIN_STATE_STAB;
|
|
|
|
} else {
|
|
desired_main_state = commander_state_s::MAIN_STATE_MANUAL;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (desired_main_state != commander_state_s::MAIN_STATE_MAX) {
|
|
main_ret = main_state_transition(_vehicle_status, desired_main_state, _vehicle_status_flags, _commander_state);
|
|
}
|
|
|
|
if (main_ret != TRANSITION_DENIED) {
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED;
|
|
|
|
} else {
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_COMPONENT_ARM_DISARM: {
|
|
|
|
// Adhere to MAVLink specs, but base on knowledge that these fundamentally encode ints
|
|
// for logic state parameters
|
|
const int8_t arming_action = static_cast<int8_t>(lroundf(cmd.param1));
|
|
|
|
if (arming_action != vehicle_command_s::ARMING_ACTION_ARM
|
|
&& arming_action != vehicle_command_s::ARMING_ACTION_DISARM) {
|
|
mavlink_log_critical(&_mavlink_log_pub, "Unsupported ARM_DISARM param: %.3f\t", (double)cmd.param1);
|
|
events::send<float>(events::ID("commander_unsupported_arm_disarm_param"), events::Log::Error,
|
|
"Unsupported ARM_DISARM param: {1:.3}", cmd.param1);
|
|
|
|
} else {
|
|
// Arm is forced (checks skipped) when param2 is set to a magic number.
|
|
const bool forced = (static_cast<int>(lroundf(cmd.param2)) == 21196);
|
|
const bool cmd_from_io = (static_cast<int>(roundf(cmd.param3)) == 1234);
|
|
|
|
// Flick to in-air restore first if this comes from an onboard system and from IO
|
|
if (!forced && cmd_from_io
|
|
&& (cmd.source_system == _vehicle_status.system_id)
|
|
&& (cmd.source_component == _vehicle_status.component_id)
|
|
&& (arming_action == vehicle_command_s::ARMING_ACTION_ARM)) {
|
|
// TODO: replace with a proper allowed transition
|
|
_arm_state_machine.forceArmState(vehicle_status_s::ARMING_STATE_IN_AIR_RESTORE);
|
|
}
|
|
|
|
transition_result_t arming_res = TRANSITION_DENIED;
|
|
arm_disarm_reason_t arm_disarm_reason = cmd.from_external ? arm_disarm_reason_t::command_external :
|
|
arm_disarm_reason_t::command_internal;
|
|
|
|
if (arming_action == vehicle_command_s::ARMING_ACTION_ARM) {
|
|
arming_res = arm(arm_disarm_reason, cmd.from_external || !forced);
|
|
|
|
} else if (arming_action == vehicle_command_s::ARMING_ACTION_DISARM) {
|
|
arming_res = disarm(arm_disarm_reason, forced);
|
|
|
|
}
|
|
|
|
if (arming_res == TRANSITION_DENIED) {
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED;
|
|
|
|
} else {
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED;
|
|
|
|
/* update home position on arming if at least 500 ms from commander start spent to avoid setting home on in-air restart */
|
|
if ((arming_action == vehicle_command_s::ARMING_ACTION_ARM) && (arming_res == TRANSITION_CHANGED)
|
|
&& (hrt_absolute_time() > (_boot_timestamp + INAIR_RESTART_HOLDOFF_INTERVAL))
|
|
&& (_param_com_home_en.get() && !_home_position_pub.get().manual_home)) {
|
|
set_home_position();
|
|
}
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_DO_FLIGHTTERMINATION: {
|
|
if (cmd.param1 > 1.5f) {
|
|
// Test termination command triggers lockdown but not actual termination.
|
|
if (!_lockdown_triggered) {
|
|
_actuator_armed.lockdown = true;
|
|
_lockdown_triggered = true;
|
|
PX4_WARN("forcing lockdown (motors off)");
|
|
}
|
|
|
|
} else if (cmd.param1 > 0.5f) {
|
|
// Trigger real termination.
|
|
if (!_flight_termination_triggered) {
|
|
_actuator_armed.force_failsafe = true;
|
|
_flight_termination_triggered = true;
|
|
PX4_WARN("forcing failsafe (termination)");
|
|
send_parachute_command();
|
|
}
|
|
|
|
} else {
|
|
_actuator_armed.force_failsafe = false;
|
|
_actuator_armed.lockdown = false;
|
|
|
|
_lockdown_triggered = false;
|
|
_flight_termination_triggered = false;
|
|
|
|
PX4_WARN("disabling failsafe and lockdown");
|
|
}
|
|
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED;
|
|
}
|
|
break;
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_DO_SET_HOME: {
|
|
if (_param_com_home_en.get()) {
|
|
bool use_current = cmd.param1 > 0.5f;
|
|
|
|
if (use_current) {
|
|
/* use current position */
|
|
if (set_home_position()) {
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED;
|
|
|
|
} else {
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED;
|
|
}
|
|
|
|
} else {
|
|
float yaw = matrix::wrap_2pi(math::radians(cmd.param4));
|
|
yaw = PX4_ISFINITE(yaw) ? yaw : (float)NAN;
|
|
const double lat = cmd.param5;
|
|
const double lon = cmd.param6;
|
|
const float alt = cmd.param7;
|
|
|
|
if (PX4_ISFINITE(lat) && PX4_ISFINITE(lon) && PX4_ISFINITE(alt)) {
|
|
const vehicle_local_position_s &local_pos = _local_position_sub.get();
|
|
|
|
if (local_pos.xy_global && local_pos.z_global) {
|
|
/* use specified position */
|
|
home_position_s home{};
|
|
home.timestamp = hrt_absolute_time();
|
|
|
|
fillGlobalHomePos(home, lat, lon, alt);
|
|
|
|
home.manual_home = true;
|
|
|
|
// update local projection reference including altitude
|
|
MapProjection ref_pos{local_pos.ref_lat, local_pos.ref_lon};
|
|
float home_x;
|
|
float home_y;
|
|
ref_pos.project(lat, lon, home_x, home_y);
|
|
const float home_z = -(alt - local_pos.ref_alt);
|
|
fillLocalHomePos(home, home_x, home_y, home_z, yaw);
|
|
|
|
/* mark home position as set */
|
|
_vehicle_status_flags.home_position_valid = _home_position_pub.update(home);
|
|
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED;
|
|
|
|
} else {
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED;
|
|
}
|
|
|
|
} else {
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_DENIED;
|
|
}
|
|
}
|
|
|
|
} else {
|
|
// COM_HOME_EN disabled
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_DENIED;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_NAV_RETURN_TO_LAUNCH: {
|
|
/* switch to RTL which ends the mission */
|
|
if (TRANSITION_CHANGED == main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_AUTO_RTL,
|
|
_vehicle_status_flags,
|
|
_commander_state)) {
|
|
mavlink_log_info(&_mavlink_log_pub, "Returning to launch\t");
|
|
events::send(events::ID("commander_rtl"), events::Log::Info, "Returning to launch");
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED;
|
|
|
|
} else {
|
|
mavlink_log_critical(&_mavlink_log_pub, "Return to launch denied\t");
|
|
/* EVENT
|
|
* @description Check for a valid position estimate
|
|
*/
|
|
events::send(events::ID("commander_rtl_denied"), {events::Log::Critical, events::LogInternal::Info},
|
|
"Return to launch denied");
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_NAV_TAKEOFF: {
|
|
/* ok, home set, use it to take off */
|
|
if (TRANSITION_CHANGED == main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_AUTO_TAKEOFF,
|
|
_vehicle_status_flags,
|
|
_commander_state)) {
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED;
|
|
|
|
} else if (_commander_state.main_state == commander_state_s::MAIN_STATE_AUTO_TAKEOFF) {
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED;
|
|
|
|
} else {
|
|
mavlink_log_critical(&_mavlink_log_pub, "Takeoff denied! Please disarm and retry\t");
|
|
/* EVENT
|
|
* @description Check for a valid position estimate
|
|
*/
|
|
events::send(events::ID("commander_takeoff_denied"), {events::Log::Critical, events::LogInternal::Info},
|
|
"Takeoff denied! Please disarm and retry");
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_NAV_VTOL_TAKEOFF:
|
|
|
|
/* ok, home set, use it to take off */
|
|
if (TRANSITION_CHANGED == main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_AUTO_VTOL_TAKEOFF,
|
|
_vehicle_status_flags,
|
|
_commander_state)) {
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED;
|
|
|
|
} else if (_commander_state.main_state == commander_state_s::MAIN_STATE_AUTO_VTOL_TAKEOFF) {
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED;
|
|
|
|
} else {
|
|
mavlink_log_critical(&_mavlink_log_pub, "VTOL Takeoff denied! Please disarm and retry");
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED;
|
|
}
|
|
|
|
break;
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_NAV_LAND: {
|
|
if (TRANSITION_DENIED != main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_AUTO_LAND,
|
|
_vehicle_status_flags,
|
|
_commander_state)) {
|
|
mavlink_log_info(&_mavlink_log_pub, "Landing at current position\t");
|
|
events::send(events::ID("commander_landing_current_pos"), events::Log::Info,
|
|
"Landing at current position");
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED;
|
|
|
|
} else {
|
|
mavlink_log_critical(&_mavlink_log_pub, "Landing denied! Please land manually\t");
|
|
/* EVENT
|
|
* @description Check for a valid position estimate
|
|
*/
|
|
events::send(events::ID("commander_landing_current_pos_denied"), {events::Log::Critical, events::LogInternal::Info},
|
|
"Landing denied! Please land manually");
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_NAV_PRECLAND: {
|
|
if (TRANSITION_DENIED != main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_AUTO_PRECLAND,
|
|
_vehicle_status_flags,
|
|
_commander_state)) {
|
|
mavlink_log_info(&_mavlink_log_pub, "Precision landing\t");
|
|
events::send(events::ID("commander_landing_prec_land"), events::Log::Info,
|
|
"Landing using precision landing");
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED;
|
|
|
|
} else {
|
|
mavlink_log_critical(&_mavlink_log_pub, "Precision landing denied! Please land manually\t");
|
|
/* EVENT
|
|
* @description Check for a valid position estimate
|
|
*/
|
|
events::send(events::ID("commander_landing_prec_land_denied"), {events::Log::Critical, events::LogInternal::Info},
|
|
"Precision landing denied! Please land manually");
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_MISSION_START: {
|
|
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_DENIED;
|
|
|
|
// check if current mission and first item are valid
|
|
if (_vehicle_status_flags.auto_mission_available) {
|
|
|
|
// requested first mission item valid
|
|
if (PX4_ISFINITE(cmd.param1) && (cmd.param1 >= -1) && (cmd.param1 < _mission_result_sub.get().seq_total)) {
|
|
|
|
// switch to AUTO_MISSION and ARM
|
|
if ((TRANSITION_DENIED != main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_AUTO_MISSION,
|
|
_vehicle_status_flags,
|
|
_commander_state))
|
|
&& (TRANSITION_DENIED != arm(arm_disarm_reason_t::mission_start))) {
|
|
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED;
|
|
|
|
} else {
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED;
|
|
mavlink_log_critical(&_mavlink_log_pub, "Mission start denied\t");
|
|
/* EVENT
|
|
* @description Check for a valid position estimate
|
|
*/
|
|
events::send(events::ID("commander_mission_start_denied"), {events::Log::Critical, events::LogInternal::Info},
|
|
"Mission start denied");
|
|
}
|
|
}
|
|
|
|
} else {
|
|
mavlink_log_critical(&_mavlink_log_pub, "Mission start denied! No valid mission\t");
|
|
events::send(events::ID("commander_mission_start_denied_no_mission"), {events::Log::Critical, events::LogInternal::Info},
|
|
"Mission start denied! No valid mission");
|
|
}
|
|
}
|
|
break;
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_CONTROL_HIGH_LATENCY: {
|
|
// if no high latency telemetry exists send a failed acknowledge
|
|
if (_high_latency_datalink_heartbeat > _boot_timestamp) {
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_FAILED;
|
|
mavlink_log_critical(&_mavlink_log_pub, "Control high latency failed! Telemetry unavailable\t");
|
|
events::send(events::ID("commander_ctrl_high_latency_failed"), {events::Log::Critical, events::LogInternal::Info},
|
|
"Control high latency failed! Telemetry unavailable");
|
|
}
|
|
}
|
|
break;
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_DO_ORBIT:
|
|
|
|
transition_result_t main_ret;
|
|
|
|
if (_vehicle_status.in_transition_mode) {
|
|
main_ret = TRANSITION_DENIED;
|
|
|
|
} else if (_vehicle_status.vehicle_type == vehicle_status_s::VEHICLE_TYPE_FIXED_WING) {
|
|
// for fixed wings the behavior of orbit is the same as loiter
|
|
main_ret = main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_AUTO_LOITER,
|
|
_vehicle_status_flags, _commander_state);
|
|
|
|
} else {
|
|
// Switch to orbit state and let the orbit task handle the command further
|
|
main_ret = main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_ORBIT, _vehicle_status_flags,
|
|
_commander_state);
|
|
}
|
|
|
|
if ((main_ret != TRANSITION_DENIED)) {
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED;
|
|
|
|
} else {
|
|
cmd_result = vehicle_command_s::VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED;
|
|
mavlink_log_critical(&_mavlink_log_pub, "Orbit command rejected");
|
|
}
|
|
|
|
break;
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_DO_MOTOR_TEST:
|
|
cmd_result = handle_command_motor_test(cmd);
|
|
break;
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_ACTUATOR_TEST:
|
|
cmd_result = handle_command_actuator_test(cmd);
|
|
break;
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_PREFLIGHT_REBOOT_SHUTDOWN: {
|
|
|
|
const int param1 = cmd.param1;
|
|
|
|
if (param1 == 0) {
|
|
// 0: Do nothing for autopilot
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED);
|
|
|
|
#if defined(CONFIG_BOARDCTL_RESET)
|
|
|
|
} else if ((param1 == 1) && shutdown_if_allowed() && (px4_reboot_request(false, 400_ms) == 0)) {
|
|
// 1: Reboot autopilot
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED);
|
|
|
|
while (1) { px4_usleep(1); }
|
|
|
|
#endif // CONFIG_BOARDCTL_RESET
|
|
|
|
#if defined(BOARD_HAS_POWER_CONTROL)
|
|
|
|
} else if ((param1 == 2) && shutdown_if_allowed() && (px4_shutdown_request(400_ms) == 0)) {
|
|
// 2: Shutdown autopilot
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED);
|
|
|
|
while (1) { px4_usleep(1); }
|
|
|
|
#endif // BOARD_HAS_POWER_CONTROL
|
|
|
|
#if defined(CONFIG_BOARDCTL_RESET)
|
|
|
|
} else if ((param1 == 3) && shutdown_if_allowed() && (px4_reboot_request(true, 400_ms) == 0)) {
|
|
// 3: Reboot autopilot and keep it in the bootloader until upgraded.
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED);
|
|
|
|
while (1) { px4_usleep(1); }
|
|
|
|
#endif // CONFIG_BOARDCTL_RESET
|
|
|
|
} else {
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_DENIED);
|
|
}
|
|
}
|
|
|
|
break;
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_PREFLIGHT_CALIBRATION: {
|
|
|
|
if (_arm_state_machine.isArmed() || _arm_state_machine.isShutdown() || _worker_thread.isBusy()) {
|
|
|
|
// reject if armed or shutting down
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED);
|
|
|
|
} else {
|
|
|
|
/* try to go to INIT/PREFLIGHT arming state */
|
|
if (TRANSITION_DENIED == _arm_state_machine.arming_state_transition(_vehicle_status, _vehicle_control_mode,
|
|
_safety.isButtonAvailable(), _safety.isSafetyOff(),
|
|
vehicle_status_s::ARMING_STATE_INIT, _actuator_armed,
|
|
false /* fRunPreArmChecks */, &_mavlink_log_pub, _vehicle_status_flags,
|
|
(cmd.from_external ? arm_disarm_reason_t::command_external : arm_disarm_reason_t::command_internal))
|
|
) {
|
|
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_DENIED);
|
|
break;
|
|
|
|
}
|
|
|
|
if ((int)(cmd.param1) == 1) {
|
|
/* gyro calibration */
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED);
|
|
_vehicle_status_flags.calibration_enabled = true;
|
|
_worker_thread.startTask(WorkerThread::Request::GyroCalibration);
|
|
|
|
} else if ((int)(cmd.param1) == vehicle_command_s::PREFLIGHT_CALIBRATION_TEMPERATURE_CALIBRATION ||
|
|
(int)(cmd.param5) == vehicle_command_s::PREFLIGHT_CALIBRATION_TEMPERATURE_CALIBRATION ||
|
|
(int)(cmd.param7) == vehicle_command_s::PREFLIGHT_CALIBRATION_TEMPERATURE_CALIBRATION) {
|
|
/* temperature calibration: handled in events module */
|
|
break;
|
|
|
|
} else if ((int)(cmd.param2) == 1) {
|
|
/* magnetometer calibration */
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED);
|
|
_vehicle_status_flags.calibration_enabled = true;
|
|
_worker_thread.startTask(WorkerThread::Request::MagCalibration);
|
|
|
|
} else if ((int)(cmd.param3) == 1) {
|
|
/* baro calibration */
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED);
|
|
_vehicle_status_flags.calibration_enabled = true;
|
|
_worker_thread.startTask(WorkerThread::Request::BaroCalibration);
|
|
|
|
} else if ((int)(cmd.param4) == 1) {
|
|
/* RC calibration */
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED);
|
|
/* disable RC control input completely */
|
|
_vehicle_status_flags.rc_calibration_in_progress = true;
|
|
mavlink_log_info(&_mavlink_log_pub, "Calibration: Disabling RC input\t");
|
|
events::send(events::ID("commander_calib_rc_off"), events::Log::Info,
|
|
"Calibration: Disabling RC input");
|
|
|
|
} else if ((int)(cmd.param4) == 2) {
|
|
/* RC trim calibration */
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED);
|
|
_vehicle_status_flags.calibration_enabled = true;
|
|
_worker_thread.startTask(WorkerThread::Request::RCTrimCalibration);
|
|
|
|
} else if ((int)(cmd.param5) == 1) {
|
|
/* accelerometer calibration */
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED);
|
|
_vehicle_status_flags.calibration_enabled = true;
|
|
_worker_thread.startTask(WorkerThread::Request::AccelCalibration);
|
|
|
|
} else if ((int)(cmd.param5) == 2) {
|
|
// board offset calibration
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED);
|
|
_vehicle_status_flags.calibration_enabled = true;
|
|
_worker_thread.startTask(WorkerThread::Request::LevelCalibration);
|
|
|
|
} else if ((int)(cmd.param5) == 4) {
|
|
// accelerometer quick calibration
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED);
|
|
_vehicle_status_flags.calibration_enabled = true;
|
|
_worker_thread.startTask(WorkerThread::Request::AccelCalibrationQuick);
|
|
|
|
} else if ((int)(cmd.param6) == 1 || (int)(cmd.param6) == 2) {
|
|
// TODO: param6 == 1 is deprecated, but we still accept it for a while (feb 2017)
|
|
/* airspeed calibration */
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED);
|
|
_vehicle_status_flags.calibration_enabled = true;
|
|
_worker_thread.startTask(WorkerThread::Request::AirspeedCalibration);
|
|
|
|
} else if ((int)(cmd.param7) == 1) {
|
|
/* do esc calibration */
|
|
if (check_battery_disconnected(&_mavlink_log_pub)) {
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED);
|
|
|
|
if (_safety.isButtonAvailable() && !_safety.isSafetyOff()) {
|
|
mavlink_log_critical(&_mavlink_log_pub, "ESC calibration denied! Press safety button first\t");
|
|
events::send(events::ID("commander_esc_calibration_denied"), events::Log::Critical,
|
|
"ESCs calibration denied");
|
|
|
|
} else {
|
|
_vehicle_status_flags.calibration_enabled = true;
|
|
_actuator_armed.in_esc_calibration_mode = true;
|
|
_worker_thread.startTask(WorkerThread::Request::ESCCalibration);
|
|
}
|
|
|
|
} else {
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_DENIED);
|
|
}
|
|
|
|
} else if ((int)(cmd.param4) == 0) {
|
|
/* RC calibration ended - have we been in one worth confirming? */
|
|
if (_vehicle_status_flags.rc_calibration_in_progress) {
|
|
/* enable RC control input */
|
|
_vehicle_status_flags.rc_calibration_in_progress = false;
|
|
mavlink_log_info(&_mavlink_log_pub, "Calibration: Restoring RC input\t");
|
|
events::send(events::ID("commander_calib_rc_on"), events::Log::Info,
|
|
"Calibration: Restoring RC input");
|
|
}
|
|
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED);
|
|
|
|
} else {
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_UNSUPPORTED);
|
|
}
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_FIXED_MAG_CAL_YAW: {
|
|
// Magnetometer quick calibration using world magnetic model and known heading
|
|
if (_arm_state_machine.isArmed() || _arm_state_machine.isShutdown() || _worker_thread.isBusy()) {
|
|
|
|
// reject if armed or shutting down
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED);
|
|
|
|
} else {
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED);
|
|
// parameter 1: Heading (degrees)
|
|
// parameter 3: Latitude (degrees)
|
|
// parameter 4: Longitude (degrees)
|
|
|
|
// assume vehicle pointing north (0 degrees) if heading isn't specified
|
|
const float heading_radians = PX4_ISFINITE(cmd.param1) ? math::radians(roundf(cmd.param1)) : 0.f;
|
|
|
|
float latitude = NAN;
|
|
float longitude = NAN;
|
|
|
|
if (PX4_ISFINITE(cmd.param3) && PX4_ISFINITE(cmd.param4)) {
|
|
// invalid if both lat & lon are 0 (current mavlink spec)
|
|
if ((fabsf(cmd.param3) > 0) && (fabsf(cmd.param4) > 0)) {
|
|
latitude = cmd.param3;
|
|
longitude = cmd.param4;
|
|
}
|
|
}
|
|
|
|
_vehicle_status_flags.calibration_enabled = true;
|
|
_worker_thread.setMagQuickData(heading_radians, latitude, longitude);
|
|
_worker_thread.startTask(WorkerThread::Request::MagCalibrationQuick);
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_PREFLIGHT_STORAGE: {
|
|
|
|
if (_arm_state_machine.isArmed() || _arm_state_machine.isShutdown() || _worker_thread.isBusy()) {
|
|
|
|
// reject if armed or shutting down
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED);
|
|
|
|
} else {
|
|
|
|
if (((int)(cmd.param1)) == 0) {
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED);
|
|
_worker_thread.startTask(WorkerThread::Request::ParamLoadDefault);
|
|
|
|
} else if (((int)(cmd.param1)) == 1) {
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED);
|
|
_worker_thread.startTask(WorkerThread::Request::ParamSaveDefault);
|
|
|
|
} else if (((int)(cmd.param1)) == 2) {
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED);
|
|
_worker_thread.startTask(WorkerThread::Request::ParamResetAllConfig);
|
|
|
|
} else if (((int)(cmd.param1)) == 3) {
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED);
|
|
_worker_thread.startTask(WorkerThread::Request::ParamResetSensorFactory);
|
|
|
|
} else if (((int)(cmd.param1)) == 4) {
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED);
|
|
_worker_thread.startTask(WorkerThread::Request::ParamResetAll);
|
|
}
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_START_RX_PAIR:
|
|
case vehicle_command_s::VEHICLE_CMD_CUSTOM_0:
|
|
case vehicle_command_s::VEHICLE_CMD_CUSTOM_1:
|
|
case vehicle_command_s::VEHICLE_CMD_CUSTOM_2:
|
|
case vehicle_command_s::VEHICLE_CMD_DO_MOUNT_CONTROL:
|
|
case vehicle_command_s::VEHICLE_CMD_DO_MOUNT_CONFIGURE:
|
|
case vehicle_command_s::VEHICLE_CMD_DO_MOUNT_CONTROL_QUAT:
|
|
case vehicle_command_s::VEHICLE_CMD_PREFLIGHT_SET_SENSOR_OFFSETS:
|
|
case vehicle_command_s::VEHICLE_CMD_PREFLIGHT_UAVCAN:
|
|
case vehicle_command_s::VEHICLE_CMD_PAYLOAD_PREPARE_DEPLOY:
|
|
case vehicle_command_s::VEHICLE_CMD_PAYLOAD_CONTROL_DEPLOY:
|
|
case vehicle_command_s::VEHICLE_CMD_DO_VTOL_TRANSITION:
|
|
case vehicle_command_s::VEHICLE_CMD_DO_TRIGGER_CONTROL:
|
|
case vehicle_command_s::VEHICLE_CMD_DO_DIGICAM_CONTROL:
|
|
case vehicle_command_s::VEHICLE_CMD_DO_SET_CAM_TRIGG_DIST:
|
|
case vehicle_command_s::VEHICLE_CMD_OBLIQUE_SURVEY:
|
|
case vehicle_command_s::VEHICLE_CMD_DO_SET_CAM_TRIGG_INTERVAL:
|
|
case vehicle_command_s::VEHICLE_CMD_SET_CAMERA_MODE:
|
|
case vehicle_command_s::VEHICLE_CMD_SET_CAMERA_ZOOM:
|
|
case vehicle_command_s::VEHICLE_CMD_SET_CAMERA_FOCUS:
|
|
case vehicle_command_s::VEHICLE_CMD_DO_CHANGE_SPEED:
|
|
case vehicle_command_s::VEHICLE_CMD_DO_LAND_START:
|
|
case vehicle_command_s::VEHICLE_CMD_DO_GO_AROUND:
|
|
case vehicle_command_s::VEHICLE_CMD_LOGGING_START:
|
|
case vehicle_command_s::VEHICLE_CMD_LOGGING_STOP:
|
|
case vehicle_command_s::VEHICLE_CMD_NAV_DELAY:
|
|
case vehicle_command_s::VEHICLE_CMD_DO_SET_ROI:
|
|
case vehicle_command_s::VEHICLE_CMD_NAV_ROI:
|
|
case vehicle_command_s::VEHICLE_CMD_DO_SET_ROI_LOCATION:
|
|
case vehicle_command_s::VEHICLE_CMD_DO_SET_ROI_WPNEXT_OFFSET:
|
|
case vehicle_command_s::VEHICLE_CMD_DO_SET_ROI_NONE:
|
|
case vehicle_command_s::VEHICLE_CMD_INJECT_FAILURE:
|
|
case vehicle_command_s::VEHICLE_CMD_SET_GPS_GLOBAL_ORIGIN:
|
|
case vehicle_command_s::VEHICLE_CMD_DO_GIMBAL_MANAGER_PITCHYAW:
|
|
case vehicle_command_s::VEHICLE_CMD_DO_GIMBAL_MANAGER_CONFIGURE:
|
|
case vehicle_command_s::VEHICLE_CMD_CONFIGURE_ACTUATOR:
|
|
case vehicle_command_s::VEHICLE_CMD_DO_SET_ACTUATOR:
|
|
case vehicle_command_s::VEHICLE_CMD_REQUEST_MESSAGE:
|
|
/* ignore commands that are handled by other parts of the system */
|
|
break;
|
|
|
|
default:
|
|
/* Warn about unsupported commands, this makes sense because only commands
|
|
* to this component ID (or all) are passed by mavlink. */
|
|
answer_command(cmd, vehicle_command_s::VEHICLE_CMD_RESULT_UNSUPPORTED);
|
|
break;
|
|
}
|
|
|
|
if (cmd_result != vehicle_command_s::VEHICLE_CMD_RESULT_UNSUPPORTED) {
|
|
/* already warned about unsupported commands in "default" case */
|
|
answer_command(cmd, cmd_result);
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
unsigned
|
|
Commander::handle_command_motor_test(const vehicle_command_s &cmd)
|
|
{
|
|
if (_arm_state_machine.isArmed() || (_safety.isButtonAvailable() && !_safety.isSafetyOff())) {
|
|
return vehicle_command_s::VEHICLE_CMD_RESULT_DENIED;
|
|
}
|
|
|
|
if (_param_com_mot_test_en.get() != 1) {
|
|
return vehicle_command_s::VEHICLE_CMD_RESULT_DENIED;
|
|
}
|
|
|
|
test_motor_s test_motor{};
|
|
test_motor.timestamp = hrt_absolute_time();
|
|
test_motor.motor_number = (int)(cmd.param1 + 0.5f) - 1;
|
|
|
|
int throttle_type = (int)(cmd.param2 + 0.5f);
|
|
|
|
if (throttle_type != 0) { // 0: MOTOR_TEST_THROTTLE_PERCENT
|
|
return vehicle_command_s::VEHICLE_CMD_RESULT_UNSUPPORTED;
|
|
}
|
|
|
|
int motor_count = (int)(cmd.param5 + 0.5);
|
|
|
|
if (motor_count > 1) {
|
|
return vehicle_command_s::VEHICLE_CMD_RESULT_UNSUPPORTED;
|
|
}
|
|
|
|
test_motor.action = test_motor_s::ACTION_RUN;
|
|
test_motor.value = math::constrain(cmd.param3 / 100.f, 0.f, 1.f);
|
|
|
|
if (test_motor.value < FLT_EPSILON) {
|
|
// the message spec is not clear on whether 0 means stop, but it should be closer to what a user expects
|
|
test_motor.value = -1.f;
|
|
}
|
|
|
|
test_motor.timeout_ms = (int)(cmd.param4 * 1000.f + 0.5f);
|
|
|
|
// enforce a timeout and a maximum limit
|
|
if (test_motor.timeout_ms == 0 || test_motor.timeout_ms > 3000) {
|
|
test_motor.timeout_ms = 3000;
|
|
}
|
|
|
|
test_motor.driver_instance = 0; // the mavlink command does not allow to specify the instance, so set to 0 for now
|
|
_test_motor_pub.publish(test_motor);
|
|
|
|
return vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED;
|
|
}
|
|
|
|
unsigned
|
|
Commander::handle_command_actuator_test(const vehicle_command_s &cmd)
|
|
{
|
|
if (_arm_state_machine.isArmed() || (_safety.isButtonAvailable() && !_safety.isSafetyOff())) {
|
|
return vehicle_command_s::VEHICLE_CMD_RESULT_DENIED;
|
|
}
|
|
|
|
if (_param_com_mot_test_en.get() != 1) {
|
|
return vehicle_command_s::VEHICLE_CMD_RESULT_DENIED;
|
|
}
|
|
|
|
actuator_test_s actuator_test{};
|
|
actuator_test.timestamp = hrt_absolute_time();
|
|
actuator_test.function = (int)(cmd.param5 + 0.5);
|
|
|
|
if (actuator_test.function < 1000) {
|
|
const int first_motor_function = 1; // from MAVLink ACTUATOR_OUTPUT_FUNCTION
|
|
const int first_servo_function = 33;
|
|
|
|
if (actuator_test.function >= first_motor_function
|
|
&& actuator_test.function < first_motor_function + actuator_test_s::MAX_NUM_MOTORS) {
|
|
actuator_test.function = actuator_test.function - first_motor_function + actuator_test_s::FUNCTION_MOTOR1;
|
|
|
|
} else if (actuator_test.function >= first_servo_function
|
|
&& actuator_test.function < first_servo_function + actuator_test_s::MAX_NUM_SERVOS) {
|
|
actuator_test.function = actuator_test.function - first_servo_function + actuator_test_s::FUNCTION_SERVO1;
|
|
|
|
} else {
|
|
return vehicle_command_s::VEHICLE_CMD_RESULT_UNSUPPORTED;
|
|
}
|
|
|
|
} else {
|
|
actuator_test.function -= 1000;
|
|
}
|
|
|
|
actuator_test.value = cmd.param1;
|
|
|
|
actuator_test.action = actuator_test_s::ACTION_DO_CONTROL;
|
|
int timeout_ms = (int)(cmd.param2 * 1000.f + 0.5f);
|
|
|
|
if (timeout_ms <= 0) {
|
|
actuator_test.action = actuator_test_s::ACTION_RELEASE_CONTROL;
|
|
|
|
} else {
|
|
actuator_test.timeout_ms = timeout_ms;
|
|
}
|
|
|
|
// enforce a timeout and a maximum limit
|
|
if (actuator_test.timeout_ms == 0 || actuator_test.timeout_ms > 3000) {
|
|
actuator_test.timeout_ms = 3000;
|
|
}
|
|
|
|
_actuator_test_pub.publish(actuator_test);
|
|
return vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED;
|
|
}
|
|
|
|
void Commander::executeActionRequest(const action_request_s &action_request)
|
|
{
|
|
arm_disarm_reason_t arm_disarm_reason{};
|
|
|
|
// Silently ignore RC actions during RC calibration
|
|
if (_vehicle_status_flags.rc_calibration_in_progress
|
|
&& (action_request.source == action_request_s::SOURCE_RC_STICK_GESTURE
|
|
|| action_request.source == action_request_s::SOURCE_RC_SWITCH
|
|
|| action_request.source == action_request_s::SOURCE_RC_BUTTON
|
|
|| action_request.source == action_request_s::SOURCE_RC_MODE_SLOT)) {
|
|
return;
|
|
}
|
|
|
|
switch (action_request.source) {
|
|
case action_request_s::SOURCE_RC_STICK_GESTURE: arm_disarm_reason = arm_disarm_reason_t::rc_stick; break;
|
|
|
|
case action_request_s::SOURCE_RC_SWITCH: arm_disarm_reason = arm_disarm_reason_t::rc_switch; break;
|
|
|
|
case action_request_s::SOURCE_RC_BUTTON: arm_disarm_reason = arm_disarm_reason_t::rc_button; break;
|
|
}
|
|
|
|
switch (action_request.action) {
|
|
case action_request_s::ACTION_DISARM: disarm(arm_disarm_reason); break;
|
|
|
|
case action_request_s::ACTION_ARM: arm(arm_disarm_reason); break;
|
|
|
|
case action_request_s::ACTION_TOGGLE_ARMING:
|
|
if (_arm_state_machine.isArmed()) {
|
|
disarm(arm_disarm_reason);
|
|
|
|
} else {
|
|
arm(arm_disarm_reason);
|
|
}
|
|
|
|
break;
|
|
|
|
case action_request_s::ACTION_UNKILL:
|
|
if (arm_disarm_reason == arm_disarm_reason_t::rc_switch && _actuator_armed.manual_lockdown) {
|
|
mavlink_log_info(&_mavlink_log_pub, "Kill-switch disengaged\t");
|
|
events::send(events::ID("commander_kill_sw_disengaged"), events::Log::Info, "Kill-switch disengaged");
|
|
_status_changed = true;
|
|
_actuator_armed.manual_lockdown = false;
|
|
}
|
|
|
|
break;
|
|
|
|
case action_request_s::ACTION_KILL:
|
|
if (arm_disarm_reason == arm_disarm_reason_t::rc_switch && !_actuator_armed.manual_lockdown) {
|
|
const char kill_switch_string[] = "Kill-switch engaged\t";
|
|
events::LogLevels log_levels{events::Log::Info};
|
|
|
|
if (_vehicle_land_detected.landed) {
|
|
mavlink_log_info(&_mavlink_log_pub, kill_switch_string);
|
|
|
|
} else {
|
|
mavlink_log_critical(&_mavlink_log_pub, kill_switch_string);
|
|
log_levels.external = events::Log::Critical;
|
|
}
|
|
|
|
events::send(events::ID("commander_kill_sw_engaged"), log_levels, "Kill-switch engaged");
|
|
|
|
_status_changed = true;
|
|
_actuator_armed.manual_lockdown = true;
|
|
send_parachute_command();
|
|
}
|
|
|
|
break;
|
|
|
|
case action_request_s::ACTION_SWITCH_MODE:
|
|
|
|
// if there's never been a mode change force RC switch as initial state
|
|
if (action_request.source == action_request_s::SOURCE_RC_MODE_SLOT
|
|
&& !_arm_state_machine.isArmed() && (_commander_state.main_state_changes == 0)
|
|
&& (action_request.mode == commander_state_s::MAIN_STATE_ALTCTL
|
|
|| action_request.mode == commander_state_s::MAIN_STATE_POSCTL)) {
|
|
_commander_state.main_state = action_request.mode;
|
|
_commander_state.main_state_changes++;
|
|
}
|
|
|
|
int ret = main_state_transition(_vehicle_status, action_request.mode, _vehicle_status_flags, _commander_state);
|
|
|
|
if (ret == transition_result_t::TRANSITION_DENIED) {
|
|
print_reject_mode(action_request.mode);
|
|
}
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
bool
|
|
Commander::hasMovedFromCurrentHomeLocation()
|
|
{
|
|
float home_dist_xy = -1.f;
|
|
float home_dist_z = -1.f;
|
|
float eph = 0.f;
|
|
float epv = 0.f;
|
|
|
|
if (_home_position_pub.get().valid_lpos && _local_position_sub.get().xy_valid && _local_position_sub.get().z_valid) {
|
|
mavlink_wpm_distance_to_point_local(_home_position_pub.get().x, _home_position_pub.get().y, _home_position_pub.get().z,
|
|
_local_position_sub.get().x, _local_position_sub.get().y, _local_position_sub.get().z,
|
|
&home_dist_xy, &home_dist_z);
|
|
|
|
eph = _local_position_sub.get().eph;
|
|
epv = _local_position_sub.get().epv;
|
|
|
|
} else if (_home_position_pub.get().valid_hpos && _home_position_pub.get().valid_alt) {
|
|
if (_vehicle_status_flags.global_position_valid) {
|
|
const vehicle_global_position_s &gpos = _global_position_sub.get();
|
|
|
|
get_distance_to_point_global_wgs84(_home_position_pub.get().lat, _home_position_pub.get().lon,
|
|
_home_position_pub.get().alt,
|
|
gpos.lat, gpos.lon, gpos.alt,
|
|
&home_dist_xy, &home_dist_z);
|
|
|
|
eph = gpos.eph;
|
|
epv = gpos.epv;
|
|
|
|
} else if (_vehicle_status_flags.gps_position_valid) {
|
|
vehicle_gps_position_s gps;
|
|
_vehicle_gps_position_sub.copy(&gps);
|
|
const double lat = static_cast<double>(gps.lat) * 1e-7;
|
|
const double lon = static_cast<double>(gps.lon) * 1e-7;
|
|
const float alt = static_cast<float>(gps.alt) * 1e-3f;
|
|
|
|
get_distance_to_point_global_wgs84(_home_position_pub.get().lat, _home_position_pub.get().lon,
|
|
_home_position_pub.get().alt,
|
|
lat, lon, alt,
|
|
&home_dist_xy, &home_dist_z);
|
|
|
|
eph = gps.eph;
|
|
epv = gps.epv;
|
|
}
|
|
}
|
|
|
|
return (home_dist_xy > eph * 2.f) || (home_dist_z > epv * 2.f);
|
|
}
|
|
|
|
/**
|
|
* @brief This function initializes the home position an altitude of the vehicle. This happens first time we get a good GPS fix and each
|
|
* time the vehicle is armed with a good GPS fix.
|
|
**/
|
|
bool
|
|
Commander::set_home_position()
|
|
{
|
|
bool updated = false;
|
|
home_position_s home{};
|
|
|
|
if (_vehicle_status_flags.local_position_valid) {
|
|
// Set home position in local coordinates
|
|
const vehicle_local_position_s &lpos = _local_position_sub.get();
|
|
_heading_reset_counter = lpos.heading_reset_counter; // TODO: should not be here
|
|
|
|
fillLocalHomePos(home, lpos);
|
|
updated = true;
|
|
}
|
|
|
|
if (_vehicle_status_flags.global_position_valid) {
|
|
// Set home using the global position estimate (fused INS/GNSS)
|
|
const vehicle_global_position_s &gpos = _global_position_sub.get();
|
|
fillGlobalHomePos(home, gpos);
|
|
setHomePosValid();
|
|
updated = true;
|
|
|
|
} else if (_vehicle_status_flags.gps_position_valid) {
|
|
// Set home using GNSS position
|
|
vehicle_gps_position_s gps_pos;
|
|
_vehicle_gps_position_sub.copy(&gps_pos);
|
|
const double lat = static_cast<double>(gps_pos.lat) * 1e-7;
|
|
const double lon = static_cast<double>(gps_pos.lon) * 1e-7;
|
|
const float alt = static_cast<float>(gps_pos.alt) * 1e-3f;
|
|
fillGlobalHomePos(home, lat, lon, alt);
|
|
setHomePosValid();
|
|
updated = true;
|
|
|
|
} else if (_local_position_sub.get().z_global) {
|
|
// handle special case where we are setting only altitude using local position reference
|
|
// This might be overwritten by altitude from global or GNSS altitude
|
|
home.alt = _local_position_sub.get().ref_alt;
|
|
home.valid_alt = true;
|
|
|
|
updated = true;
|
|
}
|
|
|
|
if (updated) {
|
|
home.timestamp = hrt_absolute_time();
|
|
home.manual_home = false;
|
|
updated = _home_position_pub.update(home);
|
|
}
|
|
|
|
return updated;
|
|
}
|
|
|
|
void
|
|
Commander::set_in_air_home_position()
|
|
{
|
|
home_position_s home{};
|
|
home = _home_position_pub.get();
|
|
const bool global_home_valid = home.valid_hpos && home.valid_alt;
|
|
const bool local_home_valid = home.valid_lpos;
|
|
|
|
if (local_home_valid && !global_home_valid) {
|
|
if (_vehicle_status_flags.local_position_valid && _vehicle_status_flags.global_position_valid) {
|
|
// Back-compute lon, lat and alt of home position given the local home position
|
|
// and current positions in local and global (GNSS fused) frames
|
|
const vehicle_local_position_s &lpos = _local_position_sub.get();
|
|
const vehicle_global_position_s &gpos = _global_position_sub.get();
|
|
|
|
MapProjection ref_pos{gpos.lat, gpos.lon};
|
|
|
|
double home_lat;
|
|
double home_lon;
|
|
ref_pos.reproject(home.x - lpos.x, home.y - lpos.y, home_lat, home_lon);
|
|
|
|
const float home_alt = gpos.alt + home.z;
|
|
fillGlobalHomePos(home, home_lat, home_lon, home_alt);
|
|
|
|
setHomePosValid();
|
|
home.timestamp = hrt_absolute_time();
|
|
_home_position_pub.update(home);
|
|
|
|
} else if (_vehicle_status_flags.local_position_valid && _vehicle_status_flags.gps_position_valid) {
|
|
// Back-compute lon, lat and alt of home position given the local home position
|
|
// and current positions in local and global (GNSS raw) frames
|
|
const vehicle_local_position_s &lpos = _local_position_sub.get();
|
|
vehicle_gps_position_s gps;
|
|
_vehicle_gps_position_sub.copy(&gps);
|
|
|
|
const double lat = static_cast<double>(gps.lat) * 1e-7;
|
|
const double lon = static_cast<double>(gps.lon) * 1e-7;
|
|
const float alt = static_cast<float>(gps.alt) * 1e-3f;
|
|
|
|
MapProjection ref_pos{lat, lon};
|
|
|
|
double home_lat;
|
|
double home_lon;
|
|
ref_pos.reproject(home.x - lpos.x, home.y - lpos.y, home_lat, home_lon);
|
|
|
|
const float home_alt = alt + home.z;
|
|
fillGlobalHomePos(home, home_lat, home_lon, home_alt);
|
|
|
|
setHomePosValid();
|
|
home.timestamp = hrt_absolute_time();
|
|
_home_position_pub.update(home);
|
|
}
|
|
|
|
} else if (!local_home_valid && global_home_valid) {
|
|
const vehicle_local_position_s &lpos = _local_position_sub.get();
|
|
|
|
if (_vehicle_status_flags.local_position_valid && lpos.xy_global && lpos.z_global) {
|
|
// Back-compute x, y and z of home position given the global home position
|
|
// and the global reference of the local frame
|
|
MapProjection ref_pos{lpos.ref_lat, lpos.ref_lon};
|
|
|
|
float home_x;
|
|
float home_y;
|
|
ref_pos.project(home.lat, home.lon, home_x, home_y);
|
|
|
|
const float home_z = -(home.alt - lpos.ref_alt);
|
|
fillLocalHomePos(home, home_x, home_y, home_z, NAN);
|
|
|
|
home.timestamp = hrt_absolute_time();
|
|
_home_position_pub.update(home);
|
|
}
|
|
|
|
} else if (!local_home_valid && !global_home_valid) {
|
|
// Home position is not known in any frame, set home at current position
|
|
set_home_position();
|
|
|
|
} else {
|
|
// nothing to do
|
|
}
|
|
}
|
|
|
|
void
|
|
Commander::fillLocalHomePos(home_position_s &home, const vehicle_local_position_s &lpos) const
|
|
{
|
|
fillLocalHomePos(home, lpos.x, lpos.y, lpos.z, lpos.heading);
|
|
}
|
|
|
|
void
|
|
Commander::fillLocalHomePos(home_position_s &home, float x, float y, float z, float heading) const
|
|
{
|
|
home.x = x;
|
|
home.y = y;
|
|
home.z = z;
|
|
home.valid_lpos = true;
|
|
|
|
home.yaw = heading;
|
|
}
|
|
|
|
void Commander::fillGlobalHomePos(home_position_s &home, const vehicle_global_position_s &gpos) const
|
|
{
|
|
fillGlobalHomePos(home, gpos.lat, gpos.lon, gpos.alt);
|
|
}
|
|
|
|
void Commander::fillGlobalHomePos(home_position_s &home, double lat, double lon, float alt) const
|
|
{
|
|
home.lat = lat;
|
|
home.lon = lon;
|
|
home.valid_hpos = true;
|
|
home.alt = alt;
|
|
home.valid_alt = true;
|
|
}
|
|
|
|
void Commander::setHomePosValid()
|
|
{
|
|
// play tune first time we initialize HOME
|
|
if (!_vehicle_status_flags.home_position_valid) {
|
|
tune_home_set(true);
|
|
}
|
|
|
|
// mark home position as set
|
|
_vehicle_status_flags.home_position_valid = true;
|
|
}
|
|
|
|
void
|
|
Commander::updateHomePositionYaw(float yaw)
|
|
{
|
|
if (_param_com_home_en.get()) {
|
|
home_position_s home = _home_position_pub.get();
|
|
|
|
home.yaw = yaw;
|
|
home.timestamp = hrt_absolute_time();
|
|
|
|
_home_position_pub.update(home);
|
|
}
|
|
}
|
|
|
|
void Commander::updateParameters()
|
|
{
|
|
// update parameters from storage
|
|
updateParams();
|
|
|
|
get_circuit_breaker_params();
|
|
|
|
int32_t value_int32 = 0;
|
|
|
|
// MAV_SYS_ID => vehicle_status.system_id
|
|
if ((_param_mav_sys_id != PARAM_INVALID) && (param_get(_param_mav_sys_id, &value_int32) == PX4_OK)) {
|
|
_vehicle_status.system_id = value_int32;
|
|
}
|
|
|
|
// MAV_COMP_ID => vehicle_status.component_id
|
|
if ((_param_mav_comp_id != PARAM_INVALID) && (param_get(_param_mav_comp_id, &value_int32) == PX4_OK)) {
|
|
_vehicle_status.component_id = value_int32;
|
|
}
|
|
|
|
// MAV_TYPE -> vehicle_status.system_type
|
|
if ((_param_mav_type != PARAM_INVALID) && (param_get(_param_mav_type, &value_int32) == PX4_OK)) {
|
|
_vehicle_status.system_type = value_int32;
|
|
}
|
|
|
|
|
|
_vehicle_status_flags.avoidance_system_required = _param_com_obs_avoid.get();
|
|
|
|
_auto_disarm_killed.set_hysteresis_time_from(false, _param_com_kill_disarm.get() * 1_s);
|
|
_offboard_available.set_hysteresis_time_from(true, _param_com_of_loss_t.get() * 1_s);
|
|
|
|
const bool is_rotary = is_rotary_wing(_vehicle_status) || (is_vtol(_vehicle_status)
|
|
&& _vtol_vehicle_status.vehicle_vtol_state != vtol_vehicle_status_s::VEHICLE_VTOL_STATE_FW);
|
|
const bool is_fixed = is_fixed_wing(_vehicle_status) || (is_vtol(_vehicle_status)
|
|
&& _vtol_vehicle_status.vehicle_vtol_state == vtol_vehicle_status_s::VEHICLE_VTOL_STATE_FW);
|
|
const bool is_ground = is_ground_rover(_vehicle_status);
|
|
|
|
/* disable manual override for all systems that rely on electronic stabilization */
|
|
if (is_rotary) {
|
|
_vehicle_status.vehicle_type = vehicle_status_s::VEHICLE_TYPE_ROTARY_WING;
|
|
|
|
} else if (is_fixed) {
|
|
_vehicle_status.vehicle_type = vehicle_status_s::VEHICLE_TYPE_FIXED_WING;
|
|
|
|
} else if (is_ground) {
|
|
_vehicle_status.vehicle_type = vehicle_status_s::VEHICLE_TYPE_ROVER;
|
|
}
|
|
|
|
_vehicle_status.is_vtol = is_vtol(_vehicle_status);
|
|
_vehicle_status.is_vtol_tailsitter = is_vtol_tailsitter(_vehicle_status);
|
|
|
|
// CP_DIST: collision preventation enabled if CP_DIST > 0
|
|
if (is_rotary_wing(_vehicle_status) || is_vtol(_vehicle_status)) {
|
|
if (_param_cp_dist == PARAM_INVALID) {
|
|
_param_cp_dist = param_find("CP_DIST");
|
|
}
|
|
|
|
float cp_dist = 0;
|
|
|
|
if (_param_cp_dist != PARAM_INVALID && (param_get(_param_cp_dist, &cp_dist) == PX4_OK)) {
|
|
_collision_prevention_enabled = cp_dist > 0.f;
|
|
}
|
|
}
|
|
|
|
// _mode_switch_mapped = (RC_MAP_FLTMODE > 0)
|
|
if (_param_rc_map_fltmode != PARAM_INVALID && (param_get(_param_rc_map_fltmode, &value_int32) == PX4_OK)) {
|
|
_mode_switch_mapped = (value_int32 > 0);
|
|
}
|
|
|
|
}
|
|
|
|
void
|
|
Commander::run()
|
|
{
|
|
/* initialize */
|
|
led_init();
|
|
buzzer_init();
|
|
|
|
#if defined(BOARD_HAS_POWER_CONTROL)
|
|
{
|
|
// we need to do an initial publication to make sure uORB allocates the buffer, which cannot happen
|
|
// in IRQ context.
|
|
power_button_state_s button_state{};
|
|
button_state.timestamp = hrt_absolute_time();
|
|
button_state.event = 0xff;
|
|
power_button_state_pub = orb_advertise(ORB_ID(power_button_state), &button_state);
|
|
|
|
_power_button_state_sub.copy(&button_state);
|
|
|
|
tune_control_s tune_control{};
|
|
button_state.timestamp = hrt_absolute_time();
|
|
tune_control_pub = orb_advertise(ORB_ID(tune_control), &tune_control);
|
|
}
|
|
|
|
if (board_register_power_state_notification_cb(power_button_state_notification_cb) != 0) {
|
|
PX4_ERR("Failed to register power notification callback");
|
|
}
|
|
|
|
#endif // BOARD_HAS_POWER_CONTROL
|
|
|
|
_boot_timestamp = hrt_absolute_time();
|
|
|
|
// initially set to failed
|
|
_last_lpos_fail_time_us = _boot_timestamp;
|
|
_last_gpos_fail_time_us = _boot_timestamp;
|
|
_last_lvel_fail_time_us = _boot_timestamp;
|
|
|
|
arm_auth_init(&_mavlink_log_pub, &_vehicle_status.system_id);
|
|
|
|
while (!should_exit()) {
|
|
|
|
perf_begin(_loop_perf);
|
|
|
|
const actuator_armed_s actuator_armed_prev{_actuator_armed};
|
|
|
|
/* update parameters */
|
|
const bool params_updated = _parameter_update_sub.updated();
|
|
|
|
if (params_updated) {
|
|
// clear update
|
|
parameter_update_s update;
|
|
_parameter_update_sub.copy(&update);
|
|
|
|
/* update parameters */
|
|
if (!_arm_state_machine.isArmed()) {
|
|
updateParameters();
|
|
|
|
_status_changed = true;
|
|
}
|
|
}
|
|
|
|
/* Update OA parameter */
|
|
_vehicle_status_flags.avoidance_system_required = _param_com_obs_avoid.get();
|
|
|
|
#if defined(BOARD_HAS_POWER_CONTROL)
|
|
|
|
/* handle power button state */
|
|
if (_power_button_state_sub.updated()) {
|
|
power_button_state_s button_state;
|
|
|
|
if (_power_button_state_sub.copy(&button_state)) {
|
|
if (button_state.event == power_button_state_s::PWR_BUTTON_STATE_REQUEST_SHUTDOWN) {
|
|
if (shutdown_if_allowed() && (px4_shutdown_request() == 0)) {
|
|
while (1) { px4_usleep(1); }
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
#endif // BOARD_HAS_POWER_CONTROL
|
|
|
|
offboard_control_update();
|
|
|
|
if (_system_power_sub.updated()) {
|
|
system_power_s system_power{};
|
|
_system_power_sub.copy(&system_power);
|
|
|
|
if (hrt_elapsed_time(&system_power.timestamp) < 1_s) {
|
|
if (system_power.servo_valid &&
|
|
!system_power.brick_valid &&
|
|
!system_power.usb_connected) {
|
|
/* flying only on servo rail, this is unsafe */
|
|
_vehicle_status_flags.power_input_valid = false;
|
|
|
|
} else {
|
|
_vehicle_status_flags.power_input_valid = true;
|
|
}
|
|
|
|
_system_power_usb_connected = system_power.usb_connected;
|
|
}
|
|
}
|
|
|
|
/* Update land detector */
|
|
if (_vehicle_land_detected_sub.updated()) {
|
|
const bool was_landed = _vehicle_land_detected.landed;
|
|
_vehicle_land_detected_sub.copy(&_vehicle_land_detected);
|
|
|
|
// Only take actions if armed
|
|
if (_arm_state_machine.isArmed()) {
|
|
if (!was_landed && _vehicle_land_detected.landed) {
|
|
mavlink_log_info(&_mavlink_log_pub, "Landing detected\t");
|
|
events::send(events::ID("commander_landing_detected"), events::Log::Info, "Landing detected");
|
|
_vehicle_status.takeoff_time = 0;
|
|
|
|
} else if (was_landed && !_vehicle_land_detected.landed) {
|
|
mavlink_log_info(&_mavlink_log_pub, "Takeoff detected\t");
|
|
events::send(events::ID("commander_takeoff_detected"), events::Log::Info, "Takeoff detected");
|
|
_vehicle_status.takeoff_time = hrt_absolute_time();
|
|
_have_taken_off_since_arming = true;
|
|
}
|
|
|
|
// automatically set or update home position
|
|
if (_param_com_home_en.get() && !_home_position_pub.get().manual_home) {
|
|
// set the home position when taking off, but only if we were previously disarmed
|
|
// and at least 500 ms from commander start spent to avoid setting home on in-air restart
|
|
if (!_vehicle_land_detected.landed && (hrt_elapsed_time(&_boot_timestamp) > INAIR_RESTART_HOLDOFF_INTERVAL)) {
|
|
if (was_landed) {
|
|
set_home_position();
|
|
|
|
} else if (_param_com_home_in_air.get()
|
|
&& (!_home_position_pub.get().valid_lpos || !_home_position_pub.get().valid_hpos
|
|
|| !_home_position_pub.get().valid_alt)) {
|
|
set_in_air_home_position();
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* safety button */
|
|
const bool safety_changed = _safety.safetyButtonHandler();
|
|
_vehicle_status.safety_button_available = _safety.isButtonAvailable();
|
|
_vehicle_status.safety_off = _safety.isSafetyOff();
|
|
|
|
if (safety_changed) {
|
|
set_health_flags(subsystem_info_s::SUBSYSTEM_TYPE_MOTORCONTROL, _safety.isButtonAvailable(), _safety.isSafetyOff(),
|
|
_safety.isButtonAvailable(), _vehicle_status);
|
|
|
|
// Notify the user if the status of the safety button changes
|
|
if (!_safety.isSafetyDisabled()) {
|
|
if (_safety.isSafetyOff()) {
|
|
set_tune(tune_control_s::TUNE_ID_NOTIFY_POSITIVE);
|
|
|
|
} else {
|
|
tune_neutral(true);
|
|
}
|
|
}
|
|
|
|
_status_changed = true;
|
|
}
|
|
|
|
/* update vtol vehicle status*/
|
|
if (_vtol_vehicle_status_sub.updated()) {
|
|
/* vtol status changed */
|
|
_vtol_vehicle_status_sub.copy(&_vtol_vehicle_status);
|
|
|
|
/* Make sure that this is only adjusted if vehicle really is of type vtol */
|
|
if (is_vtol(_vehicle_status)) {
|
|
|
|
// Check if there has been any change while updating the flags (transition = rotary wing status)
|
|
const auto new_vehicle_type = _vtol_vehicle_status.vehicle_vtol_state == vtol_vehicle_status_s::VEHICLE_VTOL_STATE_FW ?
|
|
vehicle_status_s::VEHICLE_TYPE_FIXED_WING :
|
|
vehicle_status_s::VEHICLE_TYPE_ROTARY_WING;
|
|
|
|
if (new_vehicle_type != _vehicle_status.vehicle_type) {
|
|
_vehicle_status.vehicle_type = new_vehicle_type;
|
|
_status_changed = true;
|
|
}
|
|
|
|
const bool new_in_transition = _vtol_vehicle_status.vehicle_vtol_state ==
|
|
vtol_vehicle_status_s::VEHICLE_VTOL_STATE_TRANSITION_TO_FW
|
|
|| _vtol_vehicle_status.vehicle_vtol_state == vtol_vehicle_status_s::VEHICLE_VTOL_STATE_TRANSITION_TO_MC;
|
|
|
|
if (_vehicle_status.in_transition_mode != new_in_transition) {
|
|
_vehicle_status.in_transition_mode = new_in_transition;
|
|
_status_changed = true;
|
|
}
|
|
|
|
if (_vehicle_status.in_transition_to_fw != (_vtol_vehicle_status.vehicle_vtol_state ==
|
|
vtol_vehicle_status_s::VEHICLE_VTOL_STATE_TRANSITION_TO_FW)) {
|
|
_vehicle_status.in_transition_to_fw = (_vtol_vehicle_status.vehicle_vtol_state ==
|
|
vtol_vehicle_status_s::VEHICLE_VTOL_STATE_TRANSITION_TO_FW);
|
|
_status_changed = true;
|
|
}
|
|
|
|
if (_vehicle_status_flags.vtol_transition_failure != _vtol_vehicle_status.vtol_transition_failsafe) {
|
|
_vehicle_status_flags.vtol_transition_failure = _vtol_vehicle_status.vtol_transition_failsafe;
|
|
_status_changed = true;
|
|
}
|
|
|
|
const bool should_soft_stop = (_vehicle_status.vehicle_type != vehicle_status_s::VEHICLE_TYPE_ROTARY_WING);
|
|
|
|
if (_actuator_armed.soft_stop != should_soft_stop) {
|
|
_actuator_armed.soft_stop = should_soft_stop;
|
|
_status_changed = true;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (_esc_status_sub.updated()) {
|
|
/* ESCs status changed */
|
|
esc_status_check();
|
|
|
|
} else if (_param_escs_checks_required.get() != 0) {
|
|
|
|
if (!_vehicle_status_flags.escs_error) {
|
|
|
|
if ((_last_esc_status_updated != 0) && (hrt_elapsed_time(&_last_esc_status_updated) > 700_ms)) {
|
|
/* Detect timeout after first telemetry packet received
|
|
* Some DShot ESCs are unresponsive for ~550ms during their initialization, so we use a timeout higher than that
|
|
*/
|
|
|
|
mavlink_log_critical(&_mavlink_log_pub, "ESCs telemetry timeout\t");
|
|
events::send(events::ID("commander_esc_telemetry_timeout"), events::Log::Critical,
|
|
"ESCs telemetry timeout");
|
|
_vehicle_status_flags.escs_error = true;
|
|
|
|
} else if (_last_esc_status_updated == 0 && hrt_elapsed_time(&_boot_timestamp) > 5000_ms) {
|
|
/* Detect if esc telemetry is not connected after reboot */
|
|
mavlink_log_critical(&_mavlink_log_pub, "ESCs telemetry not connected\t");
|
|
events::send(events::ID("commander_esc_telemetry_not_con"), events::Log::Critical,
|
|
"ESCs telemetry not connected");
|
|
_vehicle_status_flags.escs_error = true;
|
|
}
|
|
}
|
|
}
|
|
|
|
estimator_check();
|
|
|
|
// Auto disarm when landed or kill switch engaged
|
|
if (_arm_state_machine.isArmed()) {
|
|
|
|
// Check for auto-disarm on landing or pre-flight
|
|
if (_param_com_disarm_land.get() > 0 || _param_com_disarm_preflight.get() > 0) {
|
|
|
|
const bool landed_amid_mission = (_vehicle_status.nav_state == vehicle_status_s::NAVIGATION_STATE_AUTO_MISSION)
|
|
&& !_mission_result_sub.get().finished;
|
|
|
|
if (_param_com_disarm_land.get() > 0 && _have_taken_off_since_arming && !landed_amid_mission) {
|
|
_auto_disarm_landed.set_hysteresis_time_from(false, _param_com_disarm_land.get() * 1_s);
|
|
_auto_disarm_landed.set_state_and_update(_vehicle_land_detected.landed, hrt_absolute_time());
|
|
|
|
} else if (_param_com_disarm_preflight.get() > 0 && !_have_taken_off_since_arming) {
|
|
_auto_disarm_landed.set_hysteresis_time_from(false, _param_com_disarm_preflight.get() * 1_s);
|
|
_auto_disarm_landed.set_state_and_update(true, hrt_absolute_time());
|
|
}
|
|
|
|
if (_auto_disarm_landed.get_state()) {
|
|
if (_have_taken_off_since_arming) {
|
|
disarm(arm_disarm_reason_t::auto_disarm_land);
|
|
|
|
} else {
|
|
disarm(arm_disarm_reason_t::auto_disarm_preflight);
|
|
}
|
|
}
|
|
}
|
|
|
|
// Auto disarm after 5 seconds if kill switch is engaged
|
|
bool auto_disarm = _actuator_armed.manual_lockdown;
|
|
|
|
// auto disarm if locked down to avoid user confusion
|
|
// skipped in HITL where lockdown is enabled for safety
|
|
if (_vehicle_status.hil_state != vehicle_status_s::HIL_STATE_ON) {
|
|
auto_disarm |= _actuator_armed.lockdown;
|
|
}
|
|
|
|
_auto_disarm_killed.set_state_and_update(auto_disarm, hrt_absolute_time());
|
|
|
|
if (_auto_disarm_killed.get_state()) {
|
|
if (_actuator_armed.manual_lockdown) {
|
|
disarm(arm_disarm_reason_t::kill_switch, true);
|
|
|
|
} else {
|
|
disarm(arm_disarm_reason_t::lockdown, true);
|
|
}
|
|
}
|
|
|
|
} else {
|
|
_auto_disarm_landed.set_state_and_update(false, hrt_absolute_time());
|
|
_auto_disarm_killed.set_state_and_update(false, hrt_absolute_time());
|
|
}
|
|
|
|
if (_geofence_warning_action_on
|
|
&& _commander_state.main_state != commander_state_s::MAIN_STATE_AUTO_RTL
|
|
&& _commander_state.main_state != commander_state_s::MAIN_STATE_AUTO_LOITER
|
|
&& _commander_state.main_state != commander_state_s::MAIN_STATE_AUTO_LAND) {
|
|
|
|
// reset flag again when we switched out of it
|
|
_geofence_warning_action_on = false;
|
|
}
|
|
|
|
if (_battery_status_subs.updated()) {
|
|
battery_status_check();
|
|
}
|
|
|
|
/* If in INIT state, try to proceed to STANDBY state */
|
|
if (!_vehicle_status_flags.calibration_enabled && _arm_state_machine.isInit()) {
|
|
|
|
_arm_state_machine.arming_state_transition(_vehicle_status, _vehicle_control_mode,
|
|
_safety.isButtonAvailable(), _safety.isSafetyOff(),
|
|
vehicle_status_s::ARMING_STATE_STANDBY, _actuator_armed,
|
|
true /* fRunPreArmChecks */, &_mavlink_log_pub, _vehicle_status_flags,
|
|
arm_disarm_reason_t::transition_to_standby);
|
|
}
|
|
|
|
/* start mission result check */
|
|
if (_mission_result_sub.updated()) {
|
|
const mission_result_s &mission_result = _mission_result_sub.get();
|
|
|
|
const auto prev_mission_instance_count = mission_result.instance_count;
|
|
_mission_result_sub.update();
|
|
|
|
// if mission_result is valid for the current mission
|
|
const bool mission_result_ok = (mission_result.timestamp > _boot_timestamp)
|
|
&& (mission_result.instance_count > 0);
|
|
|
|
_vehicle_status_flags.auto_mission_available = mission_result_ok && mission_result.valid;
|
|
|
|
if (mission_result_ok) {
|
|
if (_vehicle_status.mission_failure != mission_result.failure) {
|
|
_vehicle_status.mission_failure = mission_result.failure;
|
|
_status_changed = true;
|
|
|
|
if (_vehicle_status.mission_failure) {
|
|
// navigator sends out the exact reason
|
|
mavlink_log_critical(&_mavlink_log_pub, "Mission cannot be completed\t");
|
|
events::send(events::ID("commander_mission_cannot_be_completed"), {events::Log::Critical, events::LogInternal::Info},
|
|
"Mission cannot be completed");
|
|
}
|
|
}
|
|
|
|
/* Only evaluate mission state if home is set */
|
|
if (_vehicle_status_flags.home_position_valid &&
|
|
(prev_mission_instance_count != mission_result.instance_count)) {
|
|
|
|
if (!_vehicle_status_flags.auto_mission_available) {
|
|
/* the mission is invalid */
|
|
tune_mission_fail(true);
|
|
|
|
} else if (mission_result.warning) {
|
|
/* the mission has a warning */
|
|
tune_mission_warn(true);
|
|
|
|
} else {
|
|
/* the mission is valid */
|
|
tune_mission_ok(true);
|
|
}
|
|
}
|
|
}
|
|
|
|
// Transition main state to loiter or auto-mission after takeoff is completed.
|
|
if (_arm_state_machine.isArmed() && !_vehicle_land_detected.landed
|
|
&& (_vehicle_status.nav_state == vehicle_status_s::NAVIGATION_STATE_AUTO_TAKEOFF ||
|
|
_vehicle_status.nav_state == vehicle_status_s::NAVIGATION_STATE_AUTO_VTOL_TAKEOFF)
|
|
&& (mission_result.timestamp >= _vehicle_status.nav_state_timestamp)
|
|
&& mission_result.finished) {
|
|
|
|
if ((_param_takeoff_finished_action.get() == 1) && _vehicle_status_flags.auto_mission_available) {
|
|
main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_AUTO_MISSION, _vehicle_status_flags,
|
|
_commander_state);
|
|
|
|
} else {
|
|
main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_AUTO_LOITER, _vehicle_status_flags,
|
|
_commander_state);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* start geofence result check */
|
|
if (_geofence_result_sub.update(&_geofence_result)) {
|
|
_vehicle_status.geofence_violated = _geofence_result.geofence_violated;
|
|
}
|
|
|
|
const bool in_low_battery_failsafe_delay = _battery_failsafe_timestamp != 0;
|
|
|
|
// Geofence actions
|
|
if (_arm_state_machine.isArmed()
|
|
&& (_geofence_result.geofence_action != geofence_result_s::GF_ACTION_NONE)
|
|
&& !in_low_battery_failsafe_delay) {
|
|
|
|
// check for geofence violation transition
|
|
if (_geofence_result.geofence_violated && !_geofence_violated_prev) {
|
|
|
|
switch (_geofence_result.geofence_action) {
|
|
case (geofence_result_s::GF_ACTION_NONE) : {
|
|
// do nothing
|
|
break;
|
|
}
|
|
|
|
case (geofence_result_s::GF_ACTION_WARN) : {
|
|
// do nothing, mavlink critical messages are sent by navigator
|
|
break;
|
|
}
|
|
|
|
case (geofence_result_s::GF_ACTION_LOITER) : {
|
|
if (TRANSITION_CHANGED == main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_AUTO_LOITER,
|
|
_vehicle_status_flags,
|
|
_commander_state)) {
|
|
_geofence_loiter_on = true;
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
case (geofence_result_s::GF_ACTION_RTL) : {
|
|
if (TRANSITION_CHANGED == main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_AUTO_RTL,
|
|
_vehicle_status_flags,
|
|
_commander_state)) {
|
|
_geofence_rtl_on = true;
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
case (geofence_result_s::GF_ACTION_LAND) : {
|
|
if (TRANSITION_CHANGED == main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_AUTO_LAND,
|
|
_vehicle_status_flags,
|
|
_commander_state)) {
|
|
_geofence_land_on = true;
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
case (geofence_result_s::GF_ACTION_TERMINATE) : {
|
|
PX4_WARN("Flight termination because of geofence");
|
|
|
|
if (!_flight_termination_triggered && !_lockdown_triggered) {
|
|
_flight_termination_triggered = true;
|
|
mavlink_log_critical(&_mavlink_log_pub, "Geofence violation! Flight terminated\t");
|
|
events::send(events::ID("commander_geofence_termination"), {events::Log::Alert, events::LogInternal::Warning},
|
|
"Geofence violation! Flight terminated");
|
|
_actuator_armed.force_failsafe = true;
|
|
_status_changed = true;
|
|
send_parachute_command();
|
|
}
|
|
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
_geofence_violated_prev = _geofence_result.geofence_violated;
|
|
|
|
// reset if no longer in LOITER or if manually switched to LOITER
|
|
const bool in_loiter_mode = _commander_state.main_state == commander_state_s::MAIN_STATE_AUTO_LOITER;
|
|
|
|
if (!in_loiter_mode) {
|
|
_geofence_loiter_on = false;
|
|
}
|
|
|
|
|
|
// reset if no longer in RTL or if manually switched to RTL
|
|
const bool in_rtl_mode = _commander_state.main_state == commander_state_s::MAIN_STATE_AUTO_RTL;
|
|
|
|
if (!in_rtl_mode) {
|
|
_geofence_rtl_on = false;
|
|
}
|
|
|
|
// reset if no longer in LAND or if manually switched to LAND
|
|
const bool in_land_mode = _commander_state.main_state == commander_state_s::MAIN_STATE_AUTO_LAND;
|
|
|
|
if (!in_land_mode) {
|
|
_geofence_land_on = false;
|
|
}
|
|
|
|
_geofence_warning_action_on = _geofence_warning_action_on || (_geofence_loiter_on || _geofence_rtl_on
|
|
|| _geofence_land_on);
|
|
|
|
} else {
|
|
// No geofence checks, reset flags
|
|
_geofence_loiter_on = false;
|
|
_geofence_rtl_on = false;
|
|
_geofence_land_on = false;
|
|
_geofence_warning_action_on = false;
|
|
_geofence_violated_prev = false;
|
|
}
|
|
|
|
/* Check for mission flight termination */
|
|
if (_arm_state_machine.isArmed() && _mission_result_sub.get().flight_termination &&
|
|
!_vehicle_status_flags.circuit_breaker_flight_termination_disabled) {
|
|
|
|
|
|
if (!_flight_termination_triggered && !_lockdown_triggered) {
|
|
// navigator only requests flight termination on GPS failure
|
|
mavlink_log_critical(&_mavlink_log_pub, "GPS failure: Flight terminated\t");
|
|
events::send(events::ID("commander_mission_termination"), {events::Log::Alert, events::LogInternal::Warning},
|
|
"GPS failure: Flight terminated");
|
|
_flight_termination_triggered = true;
|
|
_actuator_armed.force_failsafe = true;
|
|
_status_changed = true;
|
|
send_parachute_command();
|
|
}
|
|
|
|
if (hrt_elapsed_time(&_last_termination_message_sent) > 4_s) {
|
|
_last_termination_message_sent = hrt_absolute_time();
|
|
mavlink_log_critical(&_mavlink_log_pub, "Flight termination active\t");
|
|
events::send(events::ID("commander_mission_termination_active"), {events::Log::Alert, events::LogInternal::Warning},
|
|
"Flight termination active");
|
|
}
|
|
}
|
|
|
|
manual_control_check();
|
|
|
|
// data link checks which update the status
|
|
data_link_check();
|
|
|
|
avoidance_check();
|
|
|
|
/* check if we are disarmed and there is a better mode to wait in */
|
|
if (!_arm_state_machine.isArmed()) {
|
|
/* if there is no radio control but GPS lock the user might want to fly using
|
|
* just a tablet. Since the RC will force its mode switch setting on connecting
|
|
* we can as well just wait in a hold mode which enables tablet control.
|
|
*/
|
|
if (_vehicle_status.rc_signal_lost && (_commander_state.main_state_changes == 0)
|
|
&& _vehicle_status_flags.global_position_valid) {
|
|
|
|
main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_AUTO_LOITER, _vehicle_status_flags,
|
|
_commander_state);
|
|
}
|
|
}
|
|
|
|
/* handle commands last, as the system needs to be updated to handle them */
|
|
if (_vehicle_command_sub.updated()) {
|
|
/* got command */
|
|
const unsigned last_generation = _vehicle_command_sub.get_last_generation();
|
|
vehicle_command_s cmd;
|
|
|
|
if (_vehicle_command_sub.copy(&cmd)) {
|
|
if (_vehicle_command_sub.get_last_generation() != last_generation + 1) {
|
|
PX4_ERR("vehicle_command lost, generation %u -> %u", last_generation, _vehicle_command_sub.get_last_generation());
|
|
}
|
|
|
|
if (handle_command(cmd)) {
|
|
_status_changed = true;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (_action_request_sub.updated()) {
|
|
const unsigned last_generation = _action_request_sub.get_last_generation();
|
|
action_request_s action_request;
|
|
|
|
if (_action_request_sub.copy(&action_request)) {
|
|
if (_action_request_sub.get_last_generation() != last_generation + 1) {
|
|
PX4_ERR("action_request lost, generation %u -> %u", last_generation, _action_request_sub.get_last_generation());
|
|
}
|
|
|
|
executeActionRequest(action_request);
|
|
}
|
|
}
|
|
|
|
/* Check for failure detector status */
|
|
if (_failure_detector.update(_vehicle_status, _vehicle_control_mode)) {
|
|
const bool motor_failure_changed = ((_vehicle_status.failure_detector_status & vehicle_status_s::FAILURE_MOTOR) > 0) !=
|
|
_failure_detector.getStatus().flags.motor;
|
|
_vehicle_status.failure_detector_status = _failure_detector.getStatus().value;
|
|
auto fd_status_flags = _failure_detector.getStatusFlags();
|
|
_status_changed = true;
|
|
|
|
if (_arm_state_machine.isArmed()) {
|
|
if (fd_status_flags.arm_escs) {
|
|
// Checks have to pass within the spool up time
|
|
if (hrt_elapsed_time(&_vehicle_status.armed_time) < _param_com_spoolup_time.get() * 1_s) {
|
|
disarm(arm_disarm_reason_t::failure_detector);
|
|
mavlink_log_critical(&_mavlink_log_pub, "ESCs did not respond to arm request\t");
|
|
events::send(events::ID("commander_fd_escs_not_arming"), events::Log::Critical, "ESCs did not respond to arm request");
|
|
}
|
|
}
|
|
|
|
if (fd_status_flags.roll || fd_status_flags.pitch || fd_status_flags.alt || fd_status_flags.ext) {
|
|
const bool is_right_after_takeoff = hrt_elapsed_time(&_vehicle_status.takeoff_time) <
|
|
(1_s * _param_com_lkdown_tko.get());
|
|
|
|
if (is_right_after_takeoff && !_lockdown_triggered) {
|
|
// This handles the case where something fails during the early takeoff phase
|
|
_actuator_armed.lockdown = true;
|
|
_lockdown_triggered = true;
|
|
mavlink_log_emergency(&_mavlink_log_pub, "Critical failure detected: lockdown\t");
|
|
/* EVENT
|
|
* @description
|
|
* When a critical failure is detected right after takeoff, the system turns off the motors.
|
|
* Failures include an exceeding tilt angle, altitude failure or an external failure trigger.
|
|
*
|
|
* <profile name="dev">
|
|
* This can be configured with the parameter <param>COM_LKDOWN_TKO</param>.
|
|
* </profile>
|
|
*/
|
|
events::send(events::ID("commander_fd_lockdown"), {events::Log::Emergency, events::LogInternal::Warning},
|
|
"Critical failure detected: lockdown");
|
|
|
|
} else if (!_vehicle_status_flags.circuit_breaker_flight_termination_disabled &&
|
|
!_flight_termination_triggered && !_lockdown_triggered) {
|
|
|
|
_actuator_armed.force_failsafe = true;
|
|
_flight_termination_triggered = true;
|
|
mavlink_log_emergency(&_mavlink_log_pub, "Critical failure detected: terminate flight\t");
|
|
/* EVENT
|
|
* @description
|
|
* Critical failures include an exceeding tilt angle, altitude failure or an external failure trigger.
|
|
*
|
|
* <profile name="dev">
|
|
* Flight termination can be disabled with the parameter <param>CBRK_FLIGHTTERM</param>.
|
|
* </profile>
|
|
*/
|
|
events::send(events::ID("commander_fd_terminate"), {events::Log::Emergency, events::LogInternal::Warning},
|
|
"Critical failure detected: terminate flight");
|
|
send_parachute_command();
|
|
}
|
|
}
|
|
|
|
if (fd_status_flags.imbalanced_prop
|
|
&& !_imbalanced_propeller_check_triggered) {
|
|
_status_changed = true;
|
|
_imbalanced_propeller_check_triggered = true;
|
|
imbalanced_prop_failsafe(&_mavlink_log_pub, _vehicle_status, _vehicle_status_flags, &_commander_state,
|
|
(imbalanced_propeller_action_t)_param_com_imb_prop_act.get());
|
|
}
|
|
}
|
|
|
|
// One-time actions based on motor failure
|
|
if (motor_failure_changed) {
|
|
if (fd_status_flags.motor) {
|
|
mavlink_log_critical(&_mavlink_log_pub, "Motor failure detected\t");
|
|
events::send(events::ID("commander_motor_failure"), events::Log::Emergency,
|
|
"Motor failure! Land immediately");
|
|
set_health_flags(subsystem_info_s::SUBSYSTEM_TYPE_MOTORCONTROL, true, true, false, _vehicle_status);
|
|
|
|
} else {
|
|
mavlink_log_critical(&_mavlink_log_pub, "Motor recovered\t");
|
|
events::send(events::ID("commander_motor_recovered"), events::Log::Warning,
|
|
"Motor recovered, landing still advised");
|
|
set_health_flags(subsystem_info_s::SUBSYSTEM_TYPE_MOTORCONTROL, true, true, true, _vehicle_status);
|
|
}
|
|
}
|
|
|
|
if (fd_status_flags.motor) {
|
|
switch ((ActuatorFailureActions)_param_com_actuator_failure_act.get()) {
|
|
case ActuatorFailureActions::AUTO_LOITER:
|
|
mavlink_log_critical(&_mavlink_log_pub, "Loitering due to actuator failure\t");
|
|
events::send(events::ID("commander_act_failure_loiter"), events::Log::Warning,
|
|
"Loitering due to actuator failure");
|
|
main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_POSCTL, _vehicle_status_flags, _commander_state);
|
|
_status_changed = true;
|
|
break;
|
|
|
|
case ActuatorFailureActions::AUTO_LAND:
|
|
mavlink_log_critical(&_mavlink_log_pub, "Landing due to actuator failure\t");
|
|
events::send(events::ID("commander_act_failure_land"), events::Log::Warning,
|
|
"Landing due to actuator failure");
|
|
main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_AUTO_LAND, _vehicle_status_flags,
|
|
_commander_state);
|
|
_status_changed = true;
|
|
break;
|
|
|
|
case ActuatorFailureActions::AUTO_RTL:
|
|
mavlink_log_critical(&_mavlink_log_pub, "Returning home due to actuator failure\t");
|
|
events::send(events::ID("commander_act_failure_rtl"), events::Log::Warning,
|
|
"Returning home due to actuator failure");
|
|
main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_AUTO_RTL, _vehicle_status_flags, _commander_state);
|
|
_status_changed = true;
|
|
break;
|
|
|
|
case ActuatorFailureActions::TERMINATE:
|
|
if (!_actuator_armed.manual_lockdown) {
|
|
mavlink_log_critical(&_mavlink_log_pub, "Flight termination due to actuator failure\t");
|
|
events::send(events::ID("commander_act_failure_term"), events::Log::Warning,
|
|
"Flight termination due to actuator failure");
|
|
_status_changed = true;
|
|
_actuator_armed.manual_lockdown = true;
|
|
send_parachute_command();
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
// nothing to do here
|
|
break;
|
|
}
|
|
|
|
}
|
|
}
|
|
|
|
// Check wind speed actions if either high wind warning or high wind RTL is enabled
|
|
if ((_param_com_wind_warn.get() > FLT_EPSILON || _param_com_wind_max.get() > FLT_EPSILON)
|
|
&& !_vehicle_land_detected.landed) {
|
|
checkWindSpeedThresholds();
|
|
}
|
|
|
|
_vehicle_status_flags.flight_terminated = _actuator_armed.force_failsafe || _actuator_armed.manual_lockdown;
|
|
|
|
/* Get current timestamp */
|
|
const hrt_abstime now = hrt_absolute_time();
|
|
|
|
// Trigger RTL if flight time is larger than max flight time specified in COM_FLT_TIME_MAX.
|
|
// The user is not able to override once above threshold, except for triggering Land.
|
|
if (!_vehicle_land_detected.landed
|
|
&& _param_com_flt_time_max.get() > FLT_EPSILON
|
|
&& _commander_state.main_state != commander_state_s::MAIN_STATE_AUTO_RTL
|
|
&& _commander_state.main_state != commander_state_s::MAIN_STATE_AUTO_LAND
|
|
&& (now - _vehicle_status.takeoff_time) > (1_s * _param_com_flt_time_max.get())) {
|
|
main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_AUTO_RTL, _vehicle_status_flags, _commander_state);
|
|
_status_changed = true;
|
|
mavlink_log_critical(&_mavlink_log_pub, "Maximum flight time reached, abort operation and RTL");
|
|
/* EVENT
|
|
* @description
|
|
* Maximal flight time reached, return to launch.
|
|
*/
|
|
events::send(events::ID("commander_max_flight_time_rtl"), {events::Log::Critical, events::LogInternal::Warning},
|
|
"Maximum flight time reached, abort operation and RTL");
|
|
}
|
|
|
|
// automatically set or update home position
|
|
if (_param_com_home_en.get() && !_home_position_pub.get().manual_home) {
|
|
if (!_arm_state_machine.isArmed() && _vehicle_land_detected.landed) {
|
|
const bool can_set_home_lpos_first_time = (!_home_position_pub.get().valid_lpos
|
|
&& _vehicle_status_flags.local_position_valid);
|
|
const bool can_set_home_gpos_first_time = ((!_home_position_pub.get().valid_hpos || !_home_position_pub.get().valid_alt)
|
|
&& (_vehicle_status_flags.global_position_valid || _vehicle_status_flags.gps_position_valid));
|
|
const bool can_set_home_alt_first_time = (!_home_position_pub.get().valid_alt && _local_position_sub.get().z_global);
|
|
|
|
if (can_set_home_lpos_first_time
|
|
|| can_set_home_gpos_first_time
|
|
|| can_set_home_alt_first_time
|
|
|| hasMovedFromCurrentHomeLocation()) {
|
|
set_home_position();
|
|
}
|
|
}
|
|
}
|
|
|
|
// check for arming state changes
|
|
if (_was_armed != _arm_state_machine.isArmed()) {
|
|
_status_changed = true;
|
|
}
|
|
|
|
if (!_was_armed && _arm_state_machine.isArmed() && !_vehicle_land_detected.landed) {
|
|
_have_taken_off_since_arming = true;
|
|
}
|
|
|
|
if (_was_armed && !_arm_state_machine.isArmed()) {
|
|
const int32_t flight_uuid = _param_flight_uuid.get() + 1;
|
|
_param_flight_uuid.set(flight_uuid);
|
|
_param_flight_uuid.commit_no_notification();
|
|
|
|
_last_disarmed_timestamp = hrt_absolute_time();
|
|
|
|
// Switch back to Hold mode after autonomous landing
|
|
if (_vehicle_control_mode.flag_control_auto_enabled) {
|
|
main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_AUTO_LOITER,
|
|
_vehicle_status_flags, _commander_state);
|
|
}
|
|
}
|
|
|
|
if (!_arm_state_machine.isArmed()) {
|
|
/* Reset the flag if disarmed. */
|
|
_have_taken_off_since_arming = false;
|
|
_imbalanced_propeller_check_triggered = false;
|
|
}
|
|
|
|
/* now set navigation state according to failsafe and main state */
|
|
bool nav_state_changed = set_nav_state(_vehicle_status,
|
|
_actuator_armed,
|
|
_commander_state,
|
|
&_mavlink_log_pub,
|
|
static_cast<link_loss_actions_t>(_param_nav_dll_act.get()),
|
|
_mission_result_sub.get().finished,
|
|
_mission_result_sub.get().stay_in_failsafe,
|
|
_vehicle_status_flags,
|
|
_vehicle_land_detected.landed,
|
|
static_cast<link_loss_actions_t>(_param_nav_rcl_act.get()),
|
|
static_cast<offboard_loss_actions_t>(_param_com_obl_act.get()),
|
|
static_cast<quadchute_actions_t>(_param_com_qc_act.get()),
|
|
static_cast<offboard_loss_rc_actions_t>(_param_com_obl_rc_act.get()),
|
|
static_cast<position_nav_loss_actions_t>(_param_com_posctl_navl.get()),
|
|
_param_com_rcl_act_t.get(),
|
|
_param_com_rcl_except.get());
|
|
|
|
if (nav_state_changed) {
|
|
_vehicle_status.nav_state_timestamp = hrt_absolute_time();
|
|
}
|
|
|
|
if (_vehicle_status.failsafe != _failsafe_old) {
|
|
_status_changed = true;
|
|
|
|
if (_vehicle_status.failsafe) {
|
|
mavlink_log_info(&_mavlink_log_pub, "Failsafe mode activated\t");
|
|
events::send(events::ID("commander_failsafe_activated"), events::Log::Info, "Failsafe mode activated");
|
|
|
|
} else {
|
|
mavlink_log_info(&_mavlink_log_pub, "Failsafe mode deactivated\t");
|
|
events::send(events::ID("commander_failsafe_deactivated"), events::Log::Info, "Failsafe mode deactivated");
|
|
}
|
|
|
|
_failsafe_old = _vehicle_status.failsafe;
|
|
}
|
|
|
|
|
|
// prearm mode
|
|
switch ((PrearmedMode)_param_com_prearm_mode.get()) {
|
|
case PrearmedMode::DISABLED:
|
|
/* skip prearmed state */
|
|
_actuator_armed.prearmed = false;
|
|
break;
|
|
|
|
case PrearmedMode::ALWAYS:
|
|
/* safety is not present, go into prearmed
|
|
* (all output drivers should be started / unlocked last in the boot process
|
|
* when the rest of the system is fully initialized)
|
|
*/
|
|
_actuator_armed.prearmed = (hrt_elapsed_time(&_boot_timestamp) > 5_s);
|
|
break;
|
|
|
|
case PrearmedMode::SAFETY_BUTTON:
|
|
if (_safety.isButtonAvailable()) {
|
|
/* safety button is present, go into prearmed if safety is off */
|
|
_actuator_armed.prearmed = _safety.isSafetyOff();
|
|
|
|
} else {
|
|
/* safety button is not present, do not go into prearmed */
|
|
_actuator_armed.prearmed = false;
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
_actuator_armed.prearmed = false;
|
|
break;
|
|
}
|
|
|
|
|
|
// publish states (armed, control_mode, vehicle_status, commander_state, vehicle_status_flags, failure_detector_status) at 2 Hz or immediately when changed
|
|
if (hrt_elapsed_time(&_vehicle_status.timestamp) >= 500_ms || _status_changed || nav_state_changed
|
|
|| !(_actuator_armed == actuator_armed_prev)) {
|
|
|
|
// Evaluate current prearm status (skip during arm -> disarm transition)
|
|
if (!actuator_armed_prev.armed && !_arm_state_machine.isArmed() && !_vehicle_status_flags.calibration_enabled) {
|
|
perf_begin(_preflight_check_perf);
|
|
_vehicle_status_flags.pre_flight_checks_pass = PreFlightCheck::preflightCheck(nullptr, _vehicle_status,
|
|
_vehicle_status_flags,
|
|
_vehicle_control_mode,
|
|
false, // report_failures
|
|
_safety.isButtonAvailable(), _safety.isSafetyOff());
|
|
perf_end(_preflight_check_perf);
|
|
|
|
set_health_flags(subsystem_info_s::SUBSYSTEM_TYPE_PREARM_CHECK, true, true,
|
|
_vehicle_status_flags.pre_flight_checks_pass, _vehicle_status);
|
|
}
|
|
|
|
// publish actuator_armed first (used by output modules)
|
|
_actuator_armed.armed = _arm_state_machine.isArmed();
|
|
_actuator_armed.ready_to_arm = _arm_state_machine.isArmed() || _arm_state_machine.isStandby();
|
|
_actuator_armed.timestamp = hrt_absolute_time();
|
|
_actuator_armed_pub.publish(_actuator_armed);
|
|
|
|
// update and publish vehicle_control_mode
|
|
update_control_mode();
|
|
|
|
// vehicle_status publish (after prearm/preflight updates above)
|
|
_vehicle_status.arming_state = _arm_state_machine.getArmState();
|
|
_vehicle_status.timestamp = hrt_absolute_time();
|
|
_vehicle_status_pub.publish(_vehicle_status);
|
|
|
|
// publish vehicle_status_flags (after prearm/preflight updates above)
|
|
_vehicle_status_flags.timestamp = hrt_absolute_time();
|
|
_vehicle_status_flags_pub.publish(_vehicle_status_flags);
|
|
|
|
// commander_state publish internal state for logging purposes
|
|
_commander_state.timestamp = hrt_absolute_time();
|
|
_commander_state_pub.publish(_commander_state);
|
|
|
|
// failure_detector_status publish
|
|
failure_detector_status_s fd_status{};
|
|
fd_status.fd_roll = _failure_detector.getStatusFlags().roll;
|
|
fd_status.fd_pitch = _failure_detector.getStatusFlags().pitch;
|
|
fd_status.fd_alt = _failure_detector.getStatusFlags().alt;
|
|
fd_status.fd_ext = _failure_detector.getStatusFlags().ext;
|
|
fd_status.fd_arm_escs = _failure_detector.getStatusFlags().arm_escs;
|
|
fd_status.fd_battery = _failure_detector.getStatusFlags().battery;
|
|
fd_status.fd_imbalanced_prop = _failure_detector.getStatusFlags().imbalanced_prop;
|
|
fd_status.fd_motor = _failure_detector.getStatusFlags().motor;
|
|
fd_status.imbalanced_prop_metric = _failure_detector.getImbalancedPropMetric();
|
|
fd_status.motor_failure_mask = _failure_detector.getMotorFailures();
|
|
fd_status.timestamp = hrt_absolute_time();
|
|
_failure_detector_status_pub.publish(fd_status);
|
|
}
|
|
|
|
/* play arming and battery warning tunes */
|
|
if (!_arm_tune_played && _arm_state_machine.isArmed()) {
|
|
|
|
/* play tune when armed */
|
|
set_tune(tune_control_s::TUNE_ID_ARMING_WARNING);
|
|
_arm_tune_played = true;
|
|
|
|
} else if (!_vehicle_status_flags.usb_connected &&
|
|
(_vehicle_status.hil_state != vehicle_status_s::HIL_STATE_ON) &&
|
|
(_battery_warning == battery_status_s::BATTERY_WARNING_CRITICAL)) {
|
|
/* play tune on battery critical */
|
|
set_tune(tune_control_s::TUNE_ID_BATTERY_WARNING_FAST);
|
|
|
|
} else if ((_vehicle_status.hil_state != vehicle_status_s::HIL_STATE_ON) &&
|
|
(_battery_warning == battery_status_s::BATTERY_WARNING_LOW)) {
|
|
/* play tune on battery warning */
|
|
set_tune(tune_control_s::TUNE_ID_BATTERY_WARNING_SLOW);
|
|
|
|
} else if (_vehicle_status.failsafe && _arm_state_machine.isArmed()) {
|
|
tune_failsafe(true);
|
|
|
|
} else {
|
|
set_tune(tune_control_s::TUNE_ID_STOP);
|
|
}
|
|
|
|
/* reset arm_tune_played when disarmed */
|
|
if (!_arm_state_machine.isArmed()) {
|
|
|
|
// Notify the user that it is safe to approach the vehicle
|
|
if (_arm_tune_played) {
|
|
tune_neutral(true);
|
|
}
|
|
|
|
_arm_tune_played = false;
|
|
}
|
|
|
|
// check if the worker has finished
|
|
if (_worker_thread.hasResult()) {
|
|
int ret = _worker_thread.getResultAndReset();
|
|
_actuator_armed.in_esc_calibration_mode = false;
|
|
|
|
if (_vehicle_status_flags.calibration_enabled) { // did we do a calibration?
|
|
_vehicle_status_flags.calibration_enabled = false;
|
|
|
|
if (ret == 0) {
|
|
tune_positive(true);
|
|
|
|
} else {
|
|
tune_negative(true);
|
|
}
|
|
}
|
|
}
|
|
|
|
control_status_leds(_status_changed, _battery_warning);
|
|
|
|
_status_changed = false;
|
|
|
|
/* store last position lock state */
|
|
_last_local_altitude_valid = _vehicle_status_flags.local_altitude_valid;
|
|
_last_local_position_valid = _vehicle_status_flags.local_position_valid;
|
|
_last_global_position_valid = _vehicle_status_flags.global_position_valid;
|
|
|
|
_was_armed = _arm_state_machine.isArmed();
|
|
|
|
arm_auth_update(now, params_updated);
|
|
|
|
px4_indicate_external_reset_lockout(LockoutComponent::Commander, _arm_state_machine.isArmed());
|
|
|
|
perf_end(_loop_perf);
|
|
|
|
// sleep if there are no vehicle_commands or action_requests to process
|
|
if (!_vehicle_command_sub.updated() && !_action_request_sub.updated()) {
|
|
px4_usleep(COMMANDER_MONITORING_INTERVAL);
|
|
}
|
|
}
|
|
|
|
rgbled_set_color_and_mode(led_control_s::COLOR_WHITE, led_control_s::MODE_OFF);
|
|
|
|
/* close fds */
|
|
led_deinit();
|
|
buzzer_deinit();
|
|
}
|
|
|
|
void
|
|
Commander::get_circuit_breaker_params()
|
|
{
|
|
_vehicle_status_flags.circuit_breaker_engaged_power_check = circuit_breaker_enabled_by_val(_param_cbrk_supply_chk.get(),
|
|
CBRK_SUPPLY_CHK_KEY);
|
|
_vehicle_status_flags.circuit_breaker_engaged_usb_check = circuit_breaker_enabled_by_val(_param_cbrk_usb_chk.get(),
|
|
CBRK_USB_CHK_KEY);
|
|
_vehicle_status_flags.circuit_breaker_engaged_airspd_check = circuit_breaker_enabled_by_val(
|
|
_param_cbrk_airspd_chk.get(),
|
|
CBRK_AIRSPD_CHK_KEY);
|
|
_vehicle_status_flags.circuit_breaker_flight_termination_disabled = circuit_breaker_enabled_by_val(
|
|
_param_cbrk_flightterm.get(),
|
|
CBRK_FLIGHTTERM_KEY);
|
|
_vehicle_status_flags.circuit_breaker_engaged_posfailure_check = circuit_breaker_enabled_by_val(
|
|
_param_cbrk_velposerr.get(),
|
|
CBRK_VELPOSERR_KEY);
|
|
_vehicle_status_flags.circuit_breaker_vtol_fw_arming_check = circuit_breaker_enabled_by_val(
|
|
_param_cbrk_vtolarming.get(),
|
|
CBRK_VTOLARMING_KEY);
|
|
}
|
|
|
|
void Commander::control_status_leds(bool changed, const uint8_t battery_warning)
|
|
{
|
|
switch (blink_msg_state()) {
|
|
case 1:
|
|
// blinking LED message, don't touch LEDs
|
|
return;
|
|
|
|
case 2:
|
|
// blinking LED message completed, restore normal state
|
|
changed = true;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
const hrt_abstime time_now_us = hrt_absolute_time();
|
|
|
|
if (_cpuload_sub.updated()) {
|
|
cpuload_s cpuload;
|
|
|
|
if (_cpuload_sub.copy(&cpuload)) {
|
|
|
|
bool overload = (cpuload.load > 0.95f) || (cpuload.ram_usage > 0.98f);
|
|
|
|
if (_overload_start == 0 && overload) {
|
|
_overload_start = time_now_us;
|
|
|
|
} else if (!overload) {
|
|
_overload_start = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
const bool overload = (_overload_start != 0);
|
|
|
|
// driving the RGB led
|
|
if (changed || _last_overload != overload) {
|
|
uint8_t led_mode = led_control_s::MODE_OFF;
|
|
uint8_t led_color = led_control_s::COLOR_WHITE;
|
|
bool set_normal_color = false;
|
|
|
|
uint64_t overload_warn_delay = _arm_state_machine.isArmed() ? 1_ms : 250_ms;
|
|
|
|
// set mode
|
|
if (overload && (time_now_us >= _overload_start + overload_warn_delay)) {
|
|
led_mode = led_control_s::MODE_BLINK_FAST;
|
|
led_color = led_control_s::COLOR_PURPLE;
|
|
|
|
} else if (_arm_state_machine.isArmed()) {
|
|
led_mode = led_control_s::MODE_ON;
|
|
set_normal_color = true;
|
|
|
|
} else if (!_vehicle_status_flags.pre_flight_checks_pass) {
|
|
led_mode = led_control_s::MODE_BLINK_FAST;
|
|
led_color = led_control_s::COLOR_RED;
|
|
|
|
} else if (_arm_state_machine.isStandby()) {
|
|
led_mode = led_control_s::MODE_BREATHE;
|
|
set_normal_color = true;
|
|
|
|
} else if (_arm_state_machine.isInit()) {
|
|
// if in init status it should not be in the error state
|
|
led_mode = led_control_s::MODE_OFF;
|
|
|
|
} else {
|
|
// STANDBY_ERROR and other states
|
|
led_mode = led_control_s::MODE_BLINK_NORMAL;
|
|
led_color = led_control_s::COLOR_RED;
|
|
}
|
|
|
|
if (set_normal_color) {
|
|
// set color
|
|
if (_vehicle_status.failsafe) {
|
|
led_color = led_control_s::COLOR_PURPLE;
|
|
|
|
} else if (battery_warning == battery_status_s::BATTERY_WARNING_LOW) {
|
|
led_color = led_control_s::COLOR_AMBER;
|
|
|
|
} else if (battery_warning == battery_status_s::BATTERY_WARNING_CRITICAL) {
|
|
led_color = led_control_s::COLOR_RED;
|
|
|
|
} else {
|
|
if (_vehicle_status_flags.home_position_valid && _vehicle_status_flags.global_position_valid) {
|
|
led_color = led_control_s::COLOR_GREEN;
|
|
|
|
} else {
|
|
led_color = led_control_s::COLOR_BLUE;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (led_mode != led_control_s::MODE_OFF) {
|
|
rgbled_set_color_and_mode(led_color, led_mode);
|
|
}
|
|
}
|
|
|
|
_last_overload = overload;
|
|
|
|
#if !defined(CONFIG_ARCH_LEDS) && defined(BOARD_HAS_CONTROL_STATUS_LEDS)
|
|
|
|
if (_arm_state_machine.isArmed()) {
|
|
if (_vehicle_status.failsafe) {
|
|
BOARD_ARMED_LED_OFF();
|
|
|
|
if (time_now_us >= _led_armed_state_toggle + 250_ms) {
|
|
_led_armed_state_toggle = time_now_us;
|
|
BOARD_ARMED_STATE_LED_TOGGLE();
|
|
}
|
|
|
|
} else {
|
|
BOARD_ARMED_STATE_LED_OFF();
|
|
|
|
// armed, solid
|
|
BOARD_ARMED_LED_ON();
|
|
}
|
|
|
|
} else if (_arm_state_machine.isStandby()) {
|
|
BOARD_ARMED_LED_OFF();
|
|
|
|
// ready to arm, blink at 1Hz
|
|
if (time_now_us >= _led_armed_state_toggle + 1_s) {
|
|
_led_armed_state_toggle = time_now_us;
|
|
BOARD_ARMED_STATE_LED_TOGGLE();
|
|
}
|
|
|
|
} else {
|
|
BOARD_ARMED_LED_OFF();
|
|
|
|
// not ready to arm, blink at 10Hz
|
|
if (time_now_us >= _led_armed_state_toggle + 100_ms) {
|
|
_led_armed_state_toggle = time_now_us;
|
|
BOARD_ARMED_STATE_LED_TOGGLE();
|
|
}
|
|
}
|
|
|
|
#endif
|
|
|
|
// give system warnings on error LED
|
|
if (overload) {
|
|
if (time_now_us >= _led_overload_toggle + 50_ms) {
|
|
_led_overload_toggle = time_now_us;
|
|
BOARD_OVERLOAD_LED_TOGGLE();
|
|
}
|
|
|
|
} else {
|
|
BOARD_OVERLOAD_LED_OFF();
|
|
}
|
|
}
|
|
|
|
bool Commander::check_posvel_validity(const bool data_valid, const float data_accuracy, const float required_accuracy,
|
|
const hrt_abstime &data_timestamp_us, hrt_abstime &last_fail_time_us,
|
|
const bool was_valid)
|
|
{
|
|
bool valid = was_valid;
|
|
const bool data_stale = ((hrt_elapsed_time(&data_timestamp_us) > _param_com_pos_fs_delay.get() * 1_s)
|
|
|| (data_timestamp_us == 0));
|
|
const float req_accuracy = (was_valid ? required_accuracy * 2.5f : required_accuracy);
|
|
const bool level_check_pass = data_valid && !data_stale && (data_accuracy < req_accuracy);
|
|
|
|
// Check accuracy with hysteresis in both test level and time
|
|
if (level_check_pass) {
|
|
if (!was_valid) {
|
|
// check if probation period has elapsed
|
|
if (hrt_elapsed_time(&last_fail_time_us) > 1_s) {
|
|
valid = true;
|
|
}
|
|
}
|
|
|
|
} else {
|
|
// level check failed
|
|
if (was_valid) {
|
|
// FAILURE! no longer valid
|
|
valid = false;
|
|
}
|
|
|
|
last_fail_time_us = hrt_absolute_time();
|
|
}
|
|
|
|
if (was_valid != valid) {
|
|
_status_changed = true;
|
|
}
|
|
|
|
return valid;
|
|
}
|
|
|
|
void
|
|
Commander::update_control_mode()
|
|
{
|
|
_vehicle_control_mode = {};
|
|
|
|
/* set vehicle_control_mode according to set_navigation_state */
|
|
_vehicle_control_mode.flag_armed = _arm_state_machine.isArmed();
|
|
|
|
switch (_vehicle_status.nav_state) {
|
|
case vehicle_status_s::NAVIGATION_STATE_MANUAL:
|
|
_vehicle_control_mode.flag_control_manual_enabled = true;
|
|
_vehicle_control_mode.flag_control_rates_enabled = stabilization_required();
|
|
_vehicle_control_mode.flag_control_attitude_enabled = stabilization_required();
|
|
break;
|
|
|
|
case vehicle_status_s::NAVIGATION_STATE_STAB:
|
|
_vehicle_control_mode.flag_control_manual_enabled = true;
|
|
_vehicle_control_mode.flag_control_rates_enabled = true;
|
|
_vehicle_control_mode.flag_control_attitude_enabled = true;
|
|
break;
|
|
|
|
case vehicle_status_s::NAVIGATION_STATE_ALTCTL:
|
|
_vehicle_control_mode.flag_control_manual_enabled = true;
|
|
_vehicle_control_mode.flag_control_rates_enabled = true;
|
|
_vehicle_control_mode.flag_control_attitude_enabled = true;
|
|
_vehicle_control_mode.flag_control_altitude_enabled = true;
|
|
_vehicle_control_mode.flag_control_climb_rate_enabled = true;
|
|
break;
|
|
|
|
case vehicle_status_s::NAVIGATION_STATE_POSCTL:
|
|
_vehicle_control_mode.flag_control_manual_enabled = true;
|
|
_vehicle_control_mode.flag_control_rates_enabled = true;
|
|
_vehicle_control_mode.flag_control_attitude_enabled = true;
|
|
_vehicle_control_mode.flag_control_altitude_enabled = true;
|
|
_vehicle_control_mode.flag_control_climb_rate_enabled = true;
|
|
_vehicle_control_mode.flag_control_position_enabled = true;
|
|
_vehicle_control_mode.flag_control_velocity_enabled = true;
|
|
break;
|
|
|
|
case vehicle_status_s::NAVIGATION_STATE_AUTO_RTL:
|
|
case vehicle_status_s::NAVIGATION_STATE_AUTO_LAND:
|
|
case vehicle_status_s::NAVIGATION_STATE_AUTO_PRECLAND:
|
|
case vehicle_status_s::NAVIGATION_STATE_AUTO_MISSION:
|
|
case vehicle_status_s::NAVIGATION_STATE_AUTO_LOITER:
|
|
case vehicle_status_s::NAVIGATION_STATE_AUTO_TAKEOFF:
|
|
case vehicle_status_s::NAVIGATION_STATE_AUTO_VTOL_TAKEOFF:
|
|
_vehicle_control_mode.flag_control_auto_enabled = true;
|
|
_vehicle_control_mode.flag_control_rates_enabled = true;
|
|
_vehicle_control_mode.flag_control_attitude_enabled = true;
|
|
_vehicle_control_mode.flag_control_altitude_enabled = true;
|
|
_vehicle_control_mode.flag_control_climb_rate_enabled = true;
|
|
_vehicle_control_mode.flag_control_position_enabled = true;
|
|
_vehicle_control_mode.flag_control_velocity_enabled = true;
|
|
break;
|
|
|
|
case vehicle_status_s::NAVIGATION_STATE_ACRO:
|
|
_vehicle_control_mode.flag_control_manual_enabled = true;
|
|
_vehicle_control_mode.flag_control_rates_enabled = true;
|
|
break;
|
|
|
|
case vehicle_status_s::NAVIGATION_STATE_DESCEND:
|
|
_vehicle_control_mode.flag_control_auto_enabled = true;
|
|
_vehicle_control_mode.flag_control_rates_enabled = true;
|
|
_vehicle_control_mode.flag_control_attitude_enabled = true;
|
|
_vehicle_control_mode.flag_control_climb_rate_enabled = true;
|
|
break;
|
|
|
|
case vehicle_status_s::NAVIGATION_STATE_TERMINATION:
|
|
/* disable all controllers on termination */
|
|
_vehicle_control_mode.flag_control_termination_enabled = true;
|
|
break;
|
|
|
|
case vehicle_status_s::NAVIGATION_STATE_OFFBOARD:
|
|
_vehicle_control_mode.flag_control_offboard_enabled = true;
|
|
|
|
if (_offboard_control_mode_sub.get().position) {
|
|
_vehicle_control_mode.flag_control_position_enabled = true;
|
|
_vehicle_control_mode.flag_control_velocity_enabled = true;
|
|
_vehicle_control_mode.flag_control_altitude_enabled = true;
|
|
_vehicle_control_mode.flag_control_climb_rate_enabled = true;
|
|
_vehicle_control_mode.flag_control_acceleration_enabled = true;
|
|
_vehicle_control_mode.flag_control_rates_enabled = true;
|
|
_vehicle_control_mode.flag_control_attitude_enabled = true;
|
|
|
|
} else if (_offboard_control_mode_sub.get().velocity) {
|
|
_vehicle_control_mode.flag_control_velocity_enabled = true;
|
|
_vehicle_control_mode.flag_control_altitude_enabled = true;
|
|
_vehicle_control_mode.flag_control_climb_rate_enabled = true;
|
|
_vehicle_control_mode.flag_control_acceleration_enabled = true;
|
|
_vehicle_control_mode.flag_control_rates_enabled = true;
|
|
_vehicle_control_mode.flag_control_attitude_enabled = true;
|
|
|
|
} else if (_offboard_control_mode_sub.get().acceleration) {
|
|
_vehicle_control_mode.flag_control_acceleration_enabled = true;
|
|
_vehicle_control_mode.flag_control_rates_enabled = true;
|
|
_vehicle_control_mode.flag_control_attitude_enabled = true;
|
|
|
|
} else if (_offboard_control_mode_sub.get().attitude) {
|
|
_vehicle_control_mode.flag_control_rates_enabled = true;
|
|
_vehicle_control_mode.flag_control_attitude_enabled = true;
|
|
|
|
} else if (_offboard_control_mode_sub.get().body_rate) {
|
|
_vehicle_control_mode.flag_control_rates_enabled = true;
|
|
}
|
|
|
|
break;
|
|
|
|
case vehicle_status_s::NAVIGATION_STATE_AUTO_FOLLOW_TARGET:
|
|
|
|
// Follow Target supports RC adjustment, so disable auto control mode to disable
|
|
// the Flight Task from exiting itself when RC stick movement is detected.
|
|
case vehicle_status_s::NAVIGATION_STATE_ORBIT:
|
|
_vehicle_control_mode.flag_control_manual_enabled = false;
|
|
_vehicle_control_mode.flag_control_auto_enabled = false;
|
|
_vehicle_control_mode.flag_control_rates_enabled = true;
|
|
_vehicle_control_mode.flag_control_attitude_enabled = true;
|
|
_vehicle_control_mode.flag_control_altitude_enabled = true;
|
|
_vehicle_control_mode.flag_control_climb_rate_enabled = true;
|
|
_vehicle_control_mode.flag_control_position_enabled = true;
|
|
_vehicle_control_mode.flag_control_velocity_enabled = true;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
_vehicle_control_mode.flag_multicopter_position_control_enabled =
|
|
(_vehicle_status.vehicle_type == vehicle_status_s::VEHICLE_TYPE_ROTARY_WING)
|
|
&& (_vehicle_control_mode.flag_control_altitude_enabled
|
|
|| _vehicle_control_mode.flag_control_climb_rate_enabled
|
|
|| _vehicle_control_mode.flag_control_position_enabled
|
|
|| _vehicle_control_mode.flag_control_velocity_enabled
|
|
|| _vehicle_control_mode.flag_control_acceleration_enabled);
|
|
|
|
_vehicle_control_mode.timestamp = hrt_absolute_time();
|
|
_vehicle_control_mode_pub.publish(_vehicle_control_mode);
|
|
}
|
|
|
|
bool
|
|
Commander::stabilization_required()
|
|
{
|
|
return _vehicle_status.vehicle_type == vehicle_status_s::VEHICLE_TYPE_ROTARY_WING;
|
|
}
|
|
|
|
void
|
|
Commander::print_reject_mode(uint8_t main_state)
|
|
{
|
|
if (hrt_elapsed_time(&_last_print_mode_reject_time) > 1_s) {
|
|
|
|
mavlink_log_critical(&_mavlink_log_pub, "Switching to %s is currently not available\t", main_state_str(main_state));
|
|
/* EVENT
|
|
* @description Check for a valid position estimate
|
|
*/
|
|
events::send<events::px4::enums::navigation_mode_t>(events::ID("commander_modeswitch_not_avail"), {events::Log::Critical, events::LogInternal::Info},
|
|
"Switching to mode '{1}' is currently not possible", navigation_mode(main_state));
|
|
|
|
/* only buzz if armed, because else we're driving people nuts indoors
|
|
they really need to look at the leds as well. */
|
|
tune_negative(_arm_state_machine.isArmed());
|
|
|
|
_last_print_mode_reject_time = hrt_absolute_time();
|
|
}
|
|
}
|
|
|
|
void Commander::answer_command(const vehicle_command_s &cmd, uint8_t result)
|
|
{
|
|
switch (result) {
|
|
case vehicle_command_s::VEHICLE_CMD_RESULT_ACCEPTED:
|
|
break;
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_RESULT_DENIED:
|
|
tune_negative(true);
|
|
break;
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_RESULT_FAILED:
|
|
tune_negative(true);
|
|
break;
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED:
|
|
tune_negative(true);
|
|
break;
|
|
|
|
case vehicle_command_s::VEHICLE_CMD_RESULT_UNSUPPORTED:
|
|
tune_negative(true);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* publish ACK */
|
|
vehicle_command_ack_s command_ack{};
|
|
command_ack.command = cmd.command;
|
|
command_ack.result = result;
|
|
command_ack.target_system = cmd.source_system;
|
|
command_ack.target_component = cmd.source_component;
|
|
command_ack.timestamp = hrt_absolute_time();
|
|
_vehicle_command_ack_pub.publish(command_ack);
|
|
}
|
|
|
|
int Commander::task_spawn(int argc, char *argv[])
|
|
{
|
|
_task_id = px4_task_spawn_cmd("commander",
|
|
SCHED_DEFAULT,
|
|
SCHED_PRIORITY_DEFAULT + 40,
|
|
3250,
|
|
(px4_main_t)&run_trampoline,
|
|
(char *const *)argv);
|
|
|
|
if (_task_id < 0) {
|
|
_task_id = -1;
|
|
return -errno;
|
|
}
|
|
|
|
// wait until task is up & running
|
|
if (wait_until_running() < 0) {
|
|
_task_id = -1;
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
Commander *Commander::instantiate(int argc, char *argv[])
|
|
{
|
|
Commander *instance = new Commander();
|
|
|
|
if (instance) {
|
|
if (argc >= 2 && !strcmp(argv[1], "-h")) {
|
|
instance->enable_hil();
|
|
}
|
|
}
|
|
|
|
return instance;
|
|
}
|
|
|
|
void Commander::enable_hil()
|
|
{
|
|
_vehicle_status.hil_state = vehicle_status_s::HIL_STATE_ON;
|
|
}
|
|
|
|
void Commander::data_link_check()
|
|
{
|
|
for (auto &telemetry_status : _telemetry_status_subs) {
|
|
telemetry_status_s telemetry;
|
|
|
|
if (telemetry_status.update(&telemetry)) {
|
|
|
|
// handle different radio types
|
|
switch (telemetry.type) {
|
|
case telemetry_status_s::LINK_TYPE_USB:
|
|
// set (but don't unset) telemetry via USB as active once a MAVLink connection is up
|
|
_vehicle_status_flags.usb_connected = true;
|
|
break;
|
|
|
|
case telemetry_status_s::LINK_TYPE_IRIDIUM: {
|
|
iridiumsbd_status_s iridium_status;
|
|
|
|
if (_iridiumsbd_status_sub.update(&iridium_status)) {
|
|
_high_latency_datalink_heartbeat = iridium_status.last_heartbeat;
|
|
|
|
if (_vehicle_status.high_latency_data_link_lost) {
|
|
if (hrt_elapsed_time(&_high_latency_datalink_lost) > (_param_com_hldl_reg_t.get() * 1_s)) {
|
|
_vehicle_status.high_latency_data_link_lost = false;
|
|
_status_changed = true;
|
|
}
|
|
}
|
|
|
|
const bool present = true;
|
|
const bool enabled = true;
|
|
const bool ok = (iridium_status.last_heartbeat > 0); // maybe at some point here an additional check should be made
|
|
|
|
set_health_flags(subsystem_info_s::SUBSYSTEM_TYPE_SATCOM, present, enabled, ok, _vehicle_status);
|
|
}
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (telemetry.heartbeat_type_gcs) {
|
|
// Initial connection or recovery from data link lost
|
|
if (_vehicle_status.data_link_lost) {
|
|
_vehicle_status.data_link_lost = false;
|
|
_status_changed = true;
|
|
|
|
if (_datalink_last_heartbeat_gcs != 0) {
|
|
mavlink_log_info(&_mavlink_log_pub, "Data link regained\t");
|
|
events::send(events::ID("commander_dl_regained"), events::Log::Info, "Data link regained");
|
|
}
|
|
|
|
if (!_arm_state_machine.isArmed() && !_vehicle_status_flags.calibration_enabled) {
|
|
// make sure to report preflight check failures to a connecting GCS
|
|
PreFlightCheck::preflightCheck(&_mavlink_log_pub, _vehicle_status, _vehicle_status_flags, _vehicle_control_mode,
|
|
true, // report_failures
|
|
_safety.isButtonAvailable(), _safety.isSafetyOff());
|
|
}
|
|
}
|
|
|
|
_datalink_last_heartbeat_gcs = telemetry.timestamp;
|
|
}
|
|
|
|
if (telemetry.heartbeat_type_onboard_controller) {
|
|
if (_onboard_controller_lost) {
|
|
_onboard_controller_lost = false;
|
|
_status_changed = true;
|
|
|
|
if (_datalink_last_heartbeat_onboard_controller != 0) {
|
|
mavlink_log_info(&_mavlink_log_pub, "Onboard controller regained\t");
|
|
events::send(events::ID("commander_onboard_ctrl_regained"), events::Log::Info, "Onboard controller regained");
|
|
}
|
|
}
|
|
|
|
_datalink_last_heartbeat_onboard_controller = telemetry.timestamp;
|
|
}
|
|
|
|
if (telemetry.heartbeat_type_parachute) {
|
|
if (_parachute_system_lost) {
|
|
_parachute_system_lost = false;
|
|
|
|
if (_datalink_last_heartbeat_parachute_system != 0) {
|
|
mavlink_log_info(&_mavlink_log_pub, "Parachute system regained\t");
|
|
events::send(events::ID("commander_parachute_regained"), events::Log::Info, "Parachute system regained");
|
|
}
|
|
}
|
|
|
|
bool healthy = telemetry.parachute_system_healthy;
|
|
|
|
_datalink_last_heartbeat_parachute_system = telemetry.timestamp;
|
|
_vehicle_status_flags.parachute_system_present = true;
|
|
_vehicle_status_flags.parachute_system_healthy = healthy;
|
|
set_health_flags(subsystem_info_s::SUBSYSTEM_TYPE_PARACHUTE, true, true, healthy, _vehicle_status);
|
|
}
|
|
|
|
if (telemetry.heartbeat_component_obstacle_avoidance) {
|
|
if (_avoidance_system_lost) {
|
|
_avoidance_system_lost = false;
|
|
_status_changed = true;
|
|
}
|
|
|
|
_datalink_last_heartbeat_avoidance_system = telemetry.timestamp;
|
|
_vehicle_status_flags.avoidance_system_valid = telemetry.avoidance_system_healthy;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
// GCS data link loss failsafe
|
|
if (!_vehicle_status.data_link_lost) {
|
|
if ((_datalink_last_heartbeat_gcs != 0)
|
|
&& hrt_elapsed_time(&_datalink_last_heartbeat_gcs) > (_param_com_dl_loss_t.get() * 1_s)) {
|
|
|
|
_vehicle_status.data_link_lost = true;
|
|
_vehicle_status.data_link_lost_counter++;
|
|
|
|
mavlink_log_info(&_mavlink_log_pub, "Connection to ground station lost\t");
|
|
events::send(events::ID("commander_gcs_lost"), {events::Log::Warning, events::LogInternal::Info},
|
|
"Connection to ground station lost");
|
|
|
|
_status_changed = true;
|
|
}
|
|
}
|
|
|
|
// ONBOARD CONTROLLER data link loss failsafe
|
|
if ((_datalink_last_heartbeat_onboard_controller > 0)
|
|
&& (hrt_elapsed_time(&_datalink_last_heartbeat_onboard_controller) > (_param_com_obc_loss_t.get() * 1_s))
|
|
&& !_onboard_controller_lost) {
|
|
|
|
mavlink_log_critical(&_mavlink_log_pub, "Connection to mission computer lost\t");
|
|
events::send(events::ID("commander_mission_comp_lost"), events::Log::Critical, "Connection to mission computer lost");
|
|
_onboard_controller_lost = true;
|
|
_status_changed = true;
|
|
}
|
|
|
|
// Parachute system
|
|
if ((hrt_elapsed_time(&_datalink_last_heartbeat_parachute_system) > 3_s)
|
|
&& !_parachute_system_lost) {
|
|
mavlink_log_critical(&_mavlink_log_pub, "Parachute system lost");
|
|
_vehicle_status_flags.parachute_system_present = false;
|
|
_vehicle_status_flags.parachute_system_healthy = false;
|
|
_parachute_system_lost = true;
|
|
_status_changed = true;
|
|
set_health_flags(subsystem_info_s::SUBSYSTEM_TYPE_PARACHUTE, false, true, false, _vehicle_status);
|
|
}
|
|
|
|
// AVOIDANCE SYSTEM state check (only if it is enabled)
|
|
if (_vehicle_status_flags.avoidance_system_required && !_onboard_controller_lost) {
|
|
// if heartbeats stop
|
|
if (!_avoidance_system_lost && (_datalink_last_heartbeat_avoidance_system > 0)
|
|
&& (hrt_elapsed_time(&_datalink_last_heartbeat_avoidance_system) > 5_s)) {
|
|
|
|
_avoidance_system_lost = true;
|
|
_vehicle_status_flags.avoidance_system_valid = false;
|
|
}
|
|
}
|
|
|
|
// high latency data link loss failsafe
|
|
if (_high_latency_datalink_heartbeat > 0
|
|
&& hrt_elapsed_time(&_high_latency_datalink_heartbeat) > (_param_com_hldl_loss_t.get() * 1_s)) {
|
|
_high_latency_datalink_lost = hrt_absolute_time();
|
|
|
|
if (!_vehicle_status.high_latency_data_link_lost) {
|
|
_vehicle_status.high_latency_data_link_lost = true;
|
|
mavlink_log_critical(&_mavlink_log_pub, "High latency data link lost\t");
|
|
events::send(events::ID("commander_high_latency_lost"), events::Log::Critical, "High latency data link lost");
|
|
_status_changed = true;
|
|
}
|
|
}
|
|
}
|
|
|
|
void Commander::avoidance_check()
|
|
{
|
|
for (auto &dist_sens_sub : _distance_sensor_subs) {
|
|
distance_sensor_s distance_sensor;
|
|
|
|
if (dist_sens_sub.update(&distance_sensor)) {
|
|
if ((distance_sensor.orientation != distance_sensor_s::ROTATION_DOWNWARD_FACING) &&
|
|
(distance_sensor.orientation != distance_sensor_s::ROTATION_UPWARD_FACING)) {
|
|
|
|
_valid_distance_sensor_time_us = distance_sensor.timestamp;
|
|
}
|
|
}
|
|
}
|
|
|
|
const bool distance_sensor_valid = hrt_elapsed_time(&_valid_distance_sensor_time_us) < 500_ms;
|
|
const bool cp_healthy = _vehicle_status_flags.avoidance_system_valid || distance_sensor_valid;
|
|
|
|
const bool sensor_oa_present = cp_healthy || _vehicle_status_flags.avoidance_system_required
|
|
|| _collision_prevention_enabled;
|
|
|
|
const bool auto_mode = _vehicle_control_mode.flag_control_auto_enabled;
|
|
const bool pos_ctl_mode = (_vehicle_control_mode.flag_control_manual_enabled
|
|
&& _vehicle_control_mode.flag_control_position_enabled);
|
|
|
|
const bool sensor_oa_enabled = ((auto_mode && _vehicle_status_flags.avoidance_system_required) || (pos_ctl_mode
|
|
&& _collision_prevention_enabled));
|
|
const bool sensor_oa_healthy = ((auto_mode && _vehicle_status_flags.avoidance_system_valid) || (pos_ctl_mode
|
|
&& cp_healthy));
|
|
|
|
set_health_flags(subsystem_info_s::SUBSYSTEM_TYPE_OBSTACLE_AVOIDANCE, sensor_oa_present, sensor_oa_enabled,
|
|
sensor_oa_healthy, _vehicle_status);
|
|
}
|
|
|
|
void Commander::battery_status_check()
|
|
{
|
|
size_t battery_required_count = 0;
|
|
bool battery_has_fault = false;
|
|
// There are possibly multiple batteries, and we can't know which ones serve which purpose. So the safest
|
|
// option is to check if ANY of them have a warning, and specifically find which one has the most
|
|
// urgent warning.
|
|
uint8_t worst_warning = battery_status_s::BATTERY_WARNING_NONE;
|
|
// To make sure that all connected batteries are being regularly reported, we check which one has the
|
|
// oldest timestamp.
|
|
hrt_abstime oldest_update = hrt_absolute_time();
|
|
float worst_battery_time_s{NAN};
|
|
|
|
for (auto &battery_sub : _battery_status_subs) {
|
|
int index = battery_sub.get_instance();
|
|
battery_status_s battery;
|
|
|
|
if (!battery_sub.copy(&battery)) {
|
|
continue;
|
|
}
|
|
|
|
if (battery.is_required) {
|
|
battery_required_count++;
|
|
}
|
|
|
|
if (_arm_state_machine.isArmed()) {
|
|
|
|
if (_last_connected_batteries[index] && !battery.connected) {
|
|
mavlink_log_critical(&_mavlink_log_pub, "Battery %d disconnected. Land now! \t", index + 1);
|
|
events::send<uint8_t>(events::ID("commander_battery_disconnected"), {events::Log::Emergency, events::LogInternal::Warning},
|
|
"Battery {1} disconnected. Land now!", index + 1);
|
|
// trigger a battery failsafe action if a battery disconnects in flight
|
|
worst_warning = battery_status_s::BATTERY_WARNING_CRITICAL;
|
|
}
|
|
|
|
if ((battery.mode > 0) && (battery.mode != _last_battery_mode[index])) {
|
|
|
|
mavlink_log_critical(&_mavlink_log_pub, "Battery %d is in %s mode! \t", index + 1,
|
|
battery_mode_str(static_cast<battery_mode_t>(battery.mode)));
|
|
events::send<uint8_t, events::px4::enums::battery_mode_t>(events::ID("commander_battery_mode"), {events::Log::Critical, events::LogInternal::Warning},
|
|
"Battery {1} mode: {2}. Land now!", index + 1, static_cast<battery_mode_t>(battery.mode));
|
|
}
|
|
}
|
|
|
|
_last_connected_batteries.set(index, battery.connected);
|
|
_last_battery_mode[index] = battery.mode;
|
|
|
|
if (battery.connected) {
|
|
if (battery.warning > worst_warning) {
|
|
worst_warning = battery.warning;
|
|
}
|
|
|
|
if (battery.timestamp < oldest_update) {
|
|
oldest_update = battery.timestamp;
|
|
}
|
|
|
|
if (battery.faults > 0) {
|
|
// MAVLink supported faults, can be checked on the ground station
|
|
battery_has_fault = true;
|
|
|
|
if (battery.faults != _last_battery_fault[index] || battery.custom_faults != _last_battery_custom_fault[index]) {
|
|
for (uint8_t fault_index = 0; fault_index <= static_cast<uint8_t>(battery_fault_reason_t::_max);
|
|
fault_index++) {
|
|
if (battery.faults & (1 << fault_index)) {
|
|
mavlink_log_emergency(&_mavlink_log_pub, "Battery %d: %s. %s \t", index + 1,
|
|
battery_fault_reason_str(static_cast<battery_fault_reason_t>(fault_index)),
|
|
_arm_state_machine.isArmed() ? "Land now!" : "");
|
|
|
|
events::px4::enums::suggested_action_t action = _arm_state_machine.isArmed() ?
|
|
events::px4::enums::suggested_action_t::land :
|
|
events::px4::enums::suggested_action_t::none;
|
|
|
|
/* EVENT
|
|
* @description
|
|
* The battery reported a failure which might be dangerous to fly.
|
|
* Manufacturer error code: {4}
|
|
*/
|
|
events::send<uint8_t, battery_fault_reason_t, events::px4::enums::suggested_action_t, uint32_t>
|
|
(events::ID("commander_battery_fault"), {events::Log::Emergency, events::LogInternal::Warning},
|
|
"Battery {1}: {2}. {3}", index + 1, static_cast<battery_fault_reason_t>(fault_index), action, battery.custom_faults);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
_last_battery_fault[index] = battery.faults;
|
|
_last_battery_custom_fault[index] = battery.custom_faults;
|
|
|
|
if (PX4_ISFINITE(battery.time_remaining_s)
|
|
&& (!PX4_ISFINITE(worst_battery_time_s)
|
|
|| (PX4_ISFINITE(worst_battery_time_s) && (battery.time_remaining_s < worst_battery_time_s)))) {
|
|
worst_battery_time_s = battery.time_remaining_s;
|
|
}
|
|
|
|
}
|
|
}
|
|
|
|
rtl_time_estimate_s rtl_time_estimate{};
|
|
|
|
// Compare estimate of RTL time to estimate of remaining flight time
|
|
if (_rtl_time_estimate_sub.copy(&rtl_time_estimate)
|
|
&& (hrt_absolute_time() - rtl_time_estimate.timestamp) < 2_s
|
|
&& rtl_time_estimate.valid
|
|
&& _arm_state_machine.isArmed()
|
|
&& !_vehicle_land_detected.ground_contact // not in any landing stage
|
|
&& !_rtl_time_actions_done
|
|
&& PX4_ISFINITE(worst_battery_time_s)
|
|
&& rtl_time_estimate.safe_time_estimate >= worst_battery_time_s
|
|
&& _commander_state.main_state != commander_state_s::MAIN_STATE_AUTO_RTL
|
|
&& _commander_state.main_state != commander_state_s::MAIN_STATE_AUTO_LAND) {
|
|
// Try to trigger RTL
|
|
if (main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_AUTO_RTL, _vehicle_status_flags,
|
|
_commander_state) == TRANSITION_CHANGED) {
|
|
mavlink_log_emergency(&_mavlink_log_pub, "Remaining flight time low, returning to land\t");
|
|
events::send(events::ID("commander_remaining_flight_time_rtl"), {events::Log::Critical, events::LogInternal::Info},
|
|
"Remaining flight time low, returning to land");
|
|
|
|
} else {
|
|
mavlink_log_emergency(&_mavlink_log_pub, "Remaining flight time low, land now!\t");
|
|
events::send(events::ID("commander_remaining_flight_time_land"), {events::Log::Critical, events::LogInternal::Info},
|
|
"Remaining flight time low, land now!");
|
|
}
|
|
|
|
_rtl_time_actions_done = true;
|
|
}
|
|
|
|
bool battery_warning_level_increased_while_armed = false;
|
|
bool update_internal_battery_state = false;
|
|
|
|
if (_arm_state_machine.isArmed()) {
|
|
if (worst_warning > _battery_warning) {
|
|
battery_warning_level_increased_while_armed = true;
|
|
update_internal_battery_state = true;
|
|
}
|
|
|
|
} else {
|
|
if (_battery_warning != worst_warning) {
|
|
update_internal_battery_state = true;
|
|
}
|
|
}
|
|
|
|
if (update_internal_battery_state) {
|
|
_battery_warning = worst_warning;
|
|
}
|
|
|
|
_vehicle_status_flags.battery_healthy =
|
|
// All connected batteries are regularly being published
|
|
(hrt_elapsed_time(&oldest_update) < 5_s)
|
|
// There is at least one connected battery (in any slot)
|
|
&& (_last_connected_batteries.count() >= battery_required_count)
|
|
// No currently-connected batteries have any warning
|
|
&& (_battery_warning == battery_status_s::BATTERY_WARNING_NONE)
|
|
// No currently-connected batteries have any fault
|
|
&& (!battery_has_fault);
|
|
|
|
// execute battery failsafe if the state has gotten worse while we are armed
|
|
if (battery_warning_level_increased_while_armed) {
|
|
uint8_t failsafe_action = get_battery_failsafe_action(_commander_state, _battery_warning,
|
|
(low_battery_action_t)_param_com_low_bat_act.get());
|
|
|
|
warn_user_about_battery(&_mavlink_log_pub, _battery_warning,
|
|
failsafe_action, _param_com_bat_act_t.get(),
|
|
main_state_str(failsafe_action), navigation_mode(failsafe_action));
|
|
_battery_failsafe_timestamp = hrt_absolute_time();
|
|
|
|
// Switch to loiter to wait for the reaction delay
|
|
if (_param_com_bat_act_t.get() > 0.f
|
|
&& failsafe_action != commander_state_s::MAIN_STATE_MAX) {
|
|
main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_AUTO_LOITER, _vehicle_status_flags,
|
|
_commander_state);
|
|
}
|
|
}
|
|
|
|
if (_battery_failsafe_timestamp != 0
|
|
&& hrt_elapsed_time(&_battery_failsafe_timestamp) > _param_com_bat_act_t.get() * 1_s
|
|
&& (_commander_state.main_state == commander_state_s::MAIN_STATE_AUTO_LOITER
|
|
|| _vehicle_control_mode.flag_control_auto_enabled)) {
|
|
_battery_failsafe_timestamp = 0;
|
|
uint8_t failsafe_action = get_battery_failsafe_action(_commander_state, _battery_warning,
|
|
(low_battery_action_t)_param_com_low_bat_act.get());
|
|
|
|
if (failsafe_action != commander_state_s::MAIN_STATE_MAX) {
|
|
_commander_state.main_state = failsafe_action;
|
|
_commander_state.main_state_changes++;
|
|
_commander_state.timestamp = hrt_absolute_time();
|
|
}
|
|
}
|
|
|
|
// Handle shutdown request from emergency battery action
|
|
if (update_internal_battery_state) {
|
|
|
|
if (_battery_warning == battery_status_s::BATTERY_WARNING_EMERGENCY) {
|
|
#if defined(BOARD_HAS_POWER_CONTROL)
|
|
|
|
if (shutdown_if_allowed() && (px4_shutdown_request(60_s) == 0)) {
|
|
mavlink_log_critical(&_mavlink_log_pub, "Dangerously low battery! Shutting system down in 60 seconds\t");
|
|
events::send(events::ID("commander_low_bat_shutdown"), {events::Log::Emergency, events::LogInternal::Warning},
|
|
"Dangerously low battery! Shutting system down");
|
|
|
|
while (1) { px4_usleep(1); }
|
|
|
|
} else {
|
|
mavlink_log_critical(&_mavlink_log_pub, "System does not support shutdown\t");
|
|
/* EVENT
|
|
* @description Cannot shut down, most likely the system does not support it.
|
|
*/
|
|
events::send(events::ID("commander_low_bat_shutdown_failed"), {events::Log::Emergency, events::LogInternal::Error},
|
|
"Dangerously low battery! System shut down failed");
|
|
}
|
|
|
|
#endif // BOARD_HAS_POWER_CONTROL
|
|
}
|
|
}
|
|
}
|
|
|
|
void Commander::estimator_check()
|
|
{
|
|
// Check if quality checking of position accuracy and consistency is to be performed
|
|
const bool run_quality_checks = !_vehicle_status_flags.circuit_breaker_engaged_posfailure_check;
|
|
|
|
_local_position_sub.update();
|
|
_global_position_sub.update();
|
|
|
|
const vehicle_local_position_s &lpos = _local_position_sub.get();
|
|
|
|
if (lpos.heading_reset_counter != _heading_reset_counter) {
|
|
if (_vehicle_status_flags.home_position_valid) {
|
|
updateHomePositionYaw(_home_position_pub.get().yaw + lpos.delta_heading);
|
|
}
|
|
|
|
_heading_reset_counter = lpos.heading_reset_counter;
|
|
}
|
|
|
|
const bool mag_fault_prev = _estimator_status_flags_sub.get().cs_mag_fault;
|
|
const bool gnss_heading_fault_prev = _estimator_status_flags_sub.get().cs_gps_yaw_fault;
|
|
|
|
// use primary estimator_status
|
|
if (_estimator_selector_status_sub.updated()) {
|
|
estimator_selector_status_s estimator_selector_status;
|
|
|
|
if (_estimator_selector_status_sub.copy(&estimator_selector_status)) {
|
|
if (estimator_selector_status.primary_instance != _estimator_status_sub.get_instance()) {
|
|
_estimator_status_sub.ChangeInstance(estimator_selector_status.primary_instance);
|
|
_estimator_status_flags_sub.ChangeInstance(estimator_selector_status.primary_instance);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (_estimator_status_flags_sub.update()) {
|
|
const estimator_status_flags_s &estimator_status_flags = _estimator_status_flags_sub.get();
|
|
|
|
_vehicle_status_flags.dead_reckoning = estimator_status_flags.cs_wind_dead_reckoning
|
|
|| estimator_status_flags.cs_inertial_dead_reckoning;
|
|
|
|
if (!(estimator_status_flags.cs_inertial_dead_reckoning || estimator_status_flags.cs_wind_dead_reckoning)) {
|
|
// position requirements (update if not dead reckoning)
|
|
bool gps = estimator_status_flags.cs_gps;
|
|
bool optical_flow = estimator_status_flags.cs_opt_flow;
|
|
bool vision_position = estimator_status_flags.cs_ev_pos;
|
|
|
|
_vehicle_status_flags.position_reliant_on_gps = gps && !optical_flow && !vision_position;
|
|
_vehicle_status_flags.position_reliant_on_optical_flow = !gps && optical_flow && !vision_position;
|
|
_vehicle_status_flags.position_reliant_on_vision_position = !gps && !optical_flow && vision_position;
|
|
}
|
|
|
|
// Check for a magnetomer fault and notify the user
|
|
if (!mag_fault_prev && estimator_status_flags.cs_mag_fault) {
|
|
mavlink_log_critical(&_mavlink_log_pub, "Compass needs calibration - Land now!\t");
|
|
events::send(events::ID("commander_stopping_mag_use"), events::Log::Critical,
|
|
"Stopping compass use! Land now and calibrate the compass");
|
|
set_health_flags(subsystem_info_s::SUBSYSTEM_TYPE_MAG, true, true, false, _vehicle_status);
|
|
}
|
|
|
|
if (!gnss_heading_fault_prev && estimator_status_flags.cs_gps_yaw_fault) {
|
|
mavlink_log_critical(&_mavlink_log_pub, "GNSS heading not reliable - Land now!\t");
|
|
events::send(events::ID("commander_stopping_gnss_heading_use"), events::Log::Critical,
|
|
"GNSS heading not reliable. Land now!");
|
|
set_health_flags(subsystem_info_s::SUBSYSTEM_TYPE_GPS, true, true, false, _vehicle_status);
|
|
}
|
|
}
|
|
|
|
|
|
/* Check estimator status for signs of bad yaw induced post takeoff navigation failure
|
|
* for a short time interval after takeoff.
|
|
* Most of the time, the drone can recover from a bad initial yaw using GPS-inertial
|
|
* heading estimation (yaw emergency estimator) or GPS heading (fixed wings only), but
|
|
* if this does not fix the issue we need to stop using a position controlled
|
|
* mode to prevent flyaway crashes.
|
|
*/
|
|
bool pre_flt_fail_innov_heading = false;
|
|
bool pre_flt_fail_innov_vel_horiz = false;
|
|
|
|
if (_estimator_status_sub.updated()) {
|
|
|
|
estimator_status_s estimator_status;
|
|
|
|
if (_estimator_status_sub.copy(&estimator_status)) {
|
|
|
|
pre_flt_fail_innov_heading = estimator_status.pre_flt_fail_innov_heading;
|
|
pre_flt_fail_innov_vel_horiz = estimator_status.pre_flt_fail_innov_vel_horiz;
|
|
|
|
if (run_quality_checks && _vehicle_status.vehicle_type == vehicle_status_s::VEHICLE_TYPE_ROTARY_WING) {
|
|
|
|
if (!_arm_state_machine.isArmed()) {
|
|
_nav_test_failed = false;
|
|
_nav_test_passed = false;
|
|
|
|
} else {
|
|
if (!_nav_test_passed) {
|
|
// Both test ratios need to pass/fail together to change the nav test status
|
|
const bool innovation_pass = (estimator_status.vel_test_ratio < 1.f) && (estimator_status.pos_test_ratio < 1.f)
|
|
&& (estimator_status.vel_test_ratio > FLT_EPSILON) && (estimator_status.pos_test_ratio > FLT_EPSILON);
|
|
|
|
const bool innovation_fail = (estimator_status.vel_test_ratio >= 1.f) && (estimator_status.pos_test_ratio >= 1.f);
|
|
|
|
if (innovation_pass) {
|
|
_time_last_innov_pass = hrt_absolute_time();
|
|
|
|
// if nav status is unconfirmed, confirm yaw angle as passed after 30 seconds or achieving 5 m/s of speed
|
|
const bool sufficient_time = (_vehicle_status.takeoff_time != 0)
|
|
&& (hrt_elapsed_time(&_vehicle_status.takeoff_time) > 30_s);
|
|
const bool sufficient_speed = matrix::Vector2f(lpos.vx, lpos.vy).longerThan(5.f);
|
|
|
|
// Even if the test already failed, allow it to pass if it did not fail during the last 10 seconds
|
|
if (hrt_elapsed_time(&_time_last_innov_fail) > 10_s
|
|
&& (sufficient_time || sufficient_speed)) {
|
|
_nav_test_passed = true;
|
|
_nav_test_failed = false;
|
|
}
|
|
|
|
} else if (innovation_fail) {
|
|
_time_last_innov_fail = hrt_absolute_time();
|
|
|
|
if (!_nav_test_failed && hrt_elapsed_time(&_time_last_innov_pass) > 2_s) {
|
|
// if the innovation test has failed continuously, declare the nav as failed
|
|
_nav_test_failed = true;
|
|
mavlink_log_emergency(&_mavlink_log_pub, "Navigation failure! Land and recalibrate sensors\t");
|
|
events::send(events::ID("commander_navigation_failure"), events::Log::Emergency,
|
|
"Navigation failure! Land and recalibrate the sensors");
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
// run position and velocity accuracy checks
|
|
// Check if quality checking of position accuracy and consistency is to be performed
|
|
if (run_quality_checks) {
|
|
float lpos_eph_threshold_adj = _param_com_pos_fs_eph.get();
|
|
|
|
// relax local position eph threshold in operator controlled position mode
|
|
if (_commander_state.main_state == commander_state_s::MAIN_STATE_POSCTL &&
|
|
((_vehicle_status.nav_state == vehicle_status_s::NAVIGATION_STATE_ALTCTL)
|
|
|| (_vehicle_status.nav_state == vehicle_status_s::NAVIGATION_STATE_POSCTL))) {
|
|
|
|
// Set the allowable position uncertainty based on combination of flight and estimator state
|
|
// When we are in a operator demanded position control mode and are solely reliant on optical flow,
|
|
// do not check position error because it will gradually increase throughout flight and the operator will compensate for the drift
|
|
if (_vehicle_status_flags.position_reliant_on_optical_flow) {
|
|
lpos_eph_threshold_adj = INFINITY;
|
|
}
|
|
}
|
|
|
|
bool xy_valid = lpos.xy_valid && !_nav_test_failed;
|
|
bool v_xy_valid = lpos.v_xy_valid && !_nav_test_failed;
|
|
|
|
if (!_arm_state_machine.isArmed()) {
|
|
if (pre_flt_fail_innov_heading || pre_flt_fail_innov_vel_horiz) {
|
|
xy_valid = false;
|
|
}
|
|
|
|
if (pre_flt_fail_innov_vel_horiz) {
|
|
v_xy_valid = false;
|
|
}
|
|
}
|
|
|
|
const vehicle_global_position_s &gpos = _global_position_sub.get();
|
|
|
|
_vehicle_status_flags.global_position_valid =
|
|
check_posvel_validity(xy_valid, gpos.eph, _param_com_pos_fs_eph.get(), gpos.timestamp,
|
|
_last_gpos_fail_time_us, _vehicle_status_flags.global_position_valid);
|
|
|
|
_vehicle_status_flags.local_position_valid =
|
|
check_posvel_validity(xy_valid, lpos.eph, lpos_eph_threshold_adj, lpos.timestamp,
|
|
_last_lpos_fail_time_us, _vehicle_status_flags.local_position_valid);
|
|
|
|
_vehicle_status_flags.local_velocity_valid =
|
|
check_posvel_validity(v_xy_valid, lpos.evh, _param_com_vel_fs_evh.get(), lpos.timestamp,
|
|
_last_lvel_fail_time_us, _vehicle_status_flags.local_velocity_valid);
|
|
}
|
|
|
|
|
|
// altitude
|
|
_vehicle_status_flags.local_altitude_valid = lpos.z_valid
|
|
&& (hrt_elapsed_time(&lpos.timestamp) < (_param_com_pos_fs_delay.get() * 1_s));
|
|
|
|
|
|
// attitude
|
|
vehicle_attitude_s attitude{};
|
|
_vehicle_attitude_sub.copy(&attitude);
|
|
const matrix::Quatf q{attitude.q};
|
|
const bool no_element_larger_than_one = (fabsf(q(0)) <= 1.f)
|
|
&& (fabsf(q(1)) <= 1.f)
|
|
&& (fabsf(q(2)) <= 1.f)
|
|
&& (fabsf(q(3)) <= 1.f);
|
|
const bool norm_in_tolerance = (fabsf(1.f - q.norm()) <= 1e-6f);
|
|
|
|
const bool attitude_valid = (hrt_elapsed_time(&attitude.timestamp) < 1_s)
|
|
&& norm_in_tolerance && no_element_larger_than_one;
|
|
|
|
if (_vehicle_status_flags.attitude_valid && !attitude_valid) {
|
|
PX4_ERR("attitude estimate no longer valid");
|
|
}
|
|
|
|
_vehicle_status_flags.attitude_valid = attitude_valid;
|
|
|
|
|
|
// angular velocity
|
|
vehicle_angular_velocity_s angular_velocity{};
|
|
_vehicle_angular_velocity_sub.copy(&angular_velocity);
|
|
const bool condition_angular_velocity_time_valid = (angular_velocity.timestamp != 0)
|
|
&& (hrt_elapsed_time(&angular_velocity.timestamp) < 1_s);
|
|
const bool condition_angular_velocity_finite = PX4_ISFINITE(angular_velocity.xyz[0])
|
|
&& PX4_ISFINITE(angular_velocity.xyz[1]) && PX4_ISFINITE(angular_velocity.xyz[2]);
|
|
const bool angular_velocity_valid = condition_angular_velocity_time_valid
|
|
&& condition_angular_velocity_finite;
|
|
|
|
if (_vehicle_status_flags.angular_velocity_valid && !angular_velocity_valid) {
|
|
const char err_str[] {"angular velocity no longer valid"};
|
|
|
|
if (!condition_angular_velocity_time_valid) {
|
|
PX4_ERR("%s (timeout)", err_str);
|
|
|
|
} else if (!condition_angular_velocity_finite) {
|
|
PX4_ERR("%s (non-finite values)", err_str);
|
|
}
|
|
}
|
|
|
|
_vehicle_status_flags.angular_velocity_valid = angular_velocity_valid;
|
|
|
|
|
|
// gps
|
|
const bool condition_gps_position_was_valid = _vehicle_status_flags.gps_position_valid;
|
|
|
|
if (_vehicle_gps_position_sub.updated()) {
|
|
vehicle_gps_position_s vehicle_gps_position;
|
|
|
|
if (_vehicle_gps_position_sub.copy(&vehicle_gps_position)) {
|
|
|
|
bool time = (vehicle_gps_position.timestamp != 0) && (hrt_elapsed_time(&vehicle_gps_position.timestamp) < 1_s);
|
|
|
|
bool fix = vehicle_gps_position.fix_type >= 2;
|
|
bool eph = vehicle_gps_position.eph < _param_com_pos_fs_eph.get();
|
|
bool epv = vehicle_gps_position.epv < _param_com_pos_fs_epv.get();
|
|
bool evh = vehicle_gps_position.s_variance_m_s < _param_com_vel_fs_evh.get();
|
|
|
|
_vehicle_gps_position_valid.set_state_and_update(time && fix && eph && epv && evh, hrt_absolute_time());
|
|
_vehicle_status_flags.gps_position_valid = _vehicle_gps_position_valid.get_state();
|
|
|
|
_vehicle_gps_position_timestamp_last = vehicle_gps_position.timestamp;
|
|
}
|
|
|
|
} else {
|
|
const hrt_abstime now_us = hrt_absolute_time();
|
|
|
|
if (now_us > _vehicle_gps_position_timestamp_last + GPS_VALID_TIME) {
|
|
_vehicle_gps_position_valid.set_state_and_update(false, now_us);
|
|
_vehicle_status_flags.gps_position_valid = false;
|
|
}
|
|
}
|
|
|
|
if (condition_gps_position_was_valid && !_vehicle_status_flags.gps_position_valid) {
|
|
PX4_DEBUG("GPS no longer valid");
|
|
}
|
|
}
|
|
|
|
void Commander::manual_control_check()
|
|
{
|
|
manual_control_setpoint_s manual_control_setpoint;
|
|
const bool manual_control_updated = _manual_control_setpoint_sub.update(&manual_control_setpoint);
|
|
|
|
if (manual_control_updated && manual_control_setpoint.valid) {
|
|
|
|
if (!_vehicle_status_flags.rc_signal_found_once) {
|
|
_vehicle_status_flags.rc_signal_found_once = true;
|
|
|
|
} else if (_vehicle_status.rc_signal_lost) {
|
|
if (_last_valid_manual_control_setpoint > 0) {
|
|
float elapsed = hrt_elapsed_time(&_last_valid_manual_control_setpoint) * 1e-6f;
|
|
mavlink_log_info(&_mavlink_log_pub, "Manual control regained after %.1fs\t", (double)elapsed);
|
|
events::send<float>(events::ID("commander_rc_regained"), events::Log::Info,
|
|
"Manual control regained after {1:.1} s", elapsed);
|
|
}
|
|
}
|
|
|
|
if (_vehicle_status.rc_signal_lost) {
|
|
_vehicle_status.rc_signal_lost = false;
|
|
_status_changed = true;
|
|
}
|
|
|
|
_last_valid_manual_control_setpoint = manual_control_setpoint.timestamp;
|
|
_is_throttle_above_center = (manual_control_setpoint.z > 0.6f);
|
|
_is_throttle_low = (manual_control_setpoint.z < 0.1f);
|
|
|
|
const bool is_mavlink = (manual_control_setpoint.data_source > manual_control_setpoint_s::SOURCE_RC);
|
|
|
|
if (is_mavlink) {
|
|
set_health_flags(subsystem_info_s::SUBSYSTEM_TYPE_RCRECEIVER, true, true, true, _vehicle_status);
|
|
|
|
} else {
|
|
// if not mavlink also report valid RC calibration for health
|
|
set_health_flags(subsystem_info_s::SUBSYSTEM_TYPE_RCRECEIVER, true, true, _vehicle_status_flags.rc_calibration_valid,
|
|
_vehicle_status);
|
|
}
|
|
|
|
if (_arm_state_machine.isArmed()) {
|
|
// Abort autonomous mode and switch to position mode if sticks are moved significantly
|
|
// but only if actually in air.
|
|
if (manual_control_setpoint.sticks_moving
|
|
&& !_vehicle_control_mode.flag_control_manual_enabled
|
|
&& (_vehicle_status.vehicle_type == vehicle_status_s::VEHICLE_TYPE_ROTARY_WING)
|
|
) {
|
|
bool override_enabled = false;
|
|
|
|
if (_vehicle_control_mode.flag_control_auto_enabled) {
|
|
if (_param_com_rc_override.get() & static_cast<int32_t>(RcOverrideBits::AUTO_MODE_BIT)) {
|
|
override_enabled = true;
|
|
}
|
|
}
|
|
|
|
if (_vehicle_control_mode.flag_control_offboard_enabled) {
|
|
if (_param_com_rc_override.get() & static_cast<int32_t>(RcOverrideBits::OFFBOARD_MODE_BIT)) {
|
|
override_enabled = true;
|
|
}
|
|
}
|
|
|
|
const bool in_low_battery_failsafe_delay = (_battery_failsafe_timestamp != 0);
|
|
|
|
if (override_enabled && !in_low_battery_failsafe_delay && !_geofence_warning_action_on) {
|
|
|
|
const transition_result_t posctl_result =
|
|
main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_POSCTL, _vehicle_status_flags, _commander_state);
|
|
|
|
if (posctl_result == TRANSITION_CHANGED) {
|
|
tune_positive(true);
|
|
mavlink_log_info(&_mavlink_log_pub, "Pilot took over position control using sticks\t");
|
|
events::send(events::ID("commander_rc_override_pos"), events::Log::Info,
|
|
"Pilot took over position control using sticks");
|
|
_status_changed = true;
|
|
|
|
} else if (posctl_result == TRANSITION_DENIED) {
|
|
// If transition to POSCTL was denied, then we can try again with ALTCTL.
|
|
const transition_result_t altctl_result =
|
|
main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_ALTCTL, _vehicle_status_flags, _commander_state);
|
|
|
|
if (altctl_result == TRANSITION_CHANGED) {
|
|
tune_positive(true);
|
|
mavlink_log_info(&_mavlink_log_pub, "Pilot took over altitude control using sticks\t");
|
|
events::send(events::ID("commander_rc_override_alt"), events::Log::Info,
|
|
"Pilot took over altitude control using sticks");
|
|
_status_changed = true;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
} else {
|
|
// disarmed
|
|
// if there's never been a mode change force position control as initial state
|
|
if (_commander_state.main_state_changes == 0) {
|
|
if (is_mavlink || !_mode_switch_mapped) {
|
|
_commander_state.main_state = commander_state_s::MAIN_STATE_POSCTL;
|
|
_commander_state.main_state_changes++;
|
|
}
|
|
}
|
|
}
|
|
|
|
} else if ((manual_control_updated && !manual_control_setpoint.valid)
|
|
|| hrt_elapsed_time(&_last_valid_manual_control_setpoint) > _param_com_rc_loss_t.get() * 1_s) {
|
|
|
|
// prohibit stick use in case of reported invalidity or data timeout
|
|
if (!_vehicle_status.rc_signal_lost) {
|
|
_vehicle_status.rc_signal_lost = true;
|
|
_status_changed = true;
|
|
|
|
mavlink_log_critical(&_mavlink_log_pub, "Manual control lost\t");
|
|
events::send(events::ID("commander_rc_lost"), {events::Log::Critical, events::LogInternal::Info},
|
|
"Manual control lost");
|
|
|
|
set_health_flags(subsystem_info_s::SUBSYSTEM_TYPE_RCRECEIVER, true, true, false, _vehicle_status);
|
|
}
|
|
}
|
|
}
|
|
|
|
void
|
|
Commander::offboard_control_update()
|
|
{
|
|
bool offboard_available = false;
|
|
|
|
if (_offboard_control_mode_sub.updated()) {
|
|
const offboard_control_mode_s old = _offboard_control_mode_sub.get();
|
|
|
|
if (_offboard_control_mode_sub.update()) {
|
|
const offboard_control_mode_s &ocm = _offboard_control_mode_sub.get();
|
|
|
|
if (old.position != ocm.position ||
|
|
old.velocity != ocm.velocity ||
|
|
old.acceleration != ocm.acceleration ||
|
|
old.attitude != ocm.attitude ||
|
|
old.body_rate != ocm.body_rate ||
|
|
old.actuator != ocm.actuator) {
|
|
|
|
_status_changed = true;
|
|
}
|
|
|
|
if (ocm.position || ocm.velocity || ocm.acceleration || ocm.attitude || ocm.body_rate || ocm.actuator) {
|
|
offboard_available = true;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (_offboard_control_mode_sub.get().position && !_vehicle_status_flags.local_position_valid) {
|
|
offboard_available = false;
|
|
|
|
} else if (_offboard_control_mode_sub.get().velocity && !_vehicle_status_flags.local_velocity_valid) {
|
|
offboard_available = false;
|
|
|
|
} else if (_offboard_control_mode_sub.get().acceleration && !_vehicle_status_flags.local_velocity_valid) {
|
|
// OFFBOARD acceleration handled by position controller
|
|
offboard_available = false;
|
|
}
|
|
|
|
_offboard_available.set_state_and_update(offboard_available, hrt_absolute_time());
|
|
|
|
const bool offboard_lost = !_offboard_available.get_state();
|
|
|
|
if (_vehicle_status_flags.offboard_control_signal_lost != offboard_lost) {
|
|
_vehicle_status_flags.offboard_control_signal_lost = offboard_lost;
|
|
_status_changed = true;
|
|
}
|
|
}
|
|
|
|
void Commander::esc_status_check()
|
|
{
|
|
esc_status_s esc_status{};
|
|
|
|
_esc_status_sub.copy(&esc_status);
|
|
|
|
if (esc_status.esc_count > 0) {
|
|
|
|
char esc_fail_msg[50];
|
|
esc_fail_msg[0] = '\0';
|
|
|
|
int online_bitmask = (1 << esc_status.esc_count) - 1;
|
|
|
|
// Check if ALL the ESCs are online
|
|
if (online_bitmask == esc_status.esc_online_flags) {
|
|
|
|
_vehicle_status_flags.escs_error = false;
|
|
_last_esc_online_flags = esc_status.esc_online_flags;
|
|
|
|
} else if (_last_esc_online_flags == esc_status.esc_online_flags) {
|
|
|
|
// Avoid checking the status if the flags are the same or if the mixer has not yet been loaded in the ESC driver
|
|
|
|
_vehicle_status_flags.escs_error = true;
|
|
|
|
} else if (esc_status.esc_online_flags < _last_esc_online_flags) {
|
|
|
|
// Only warn the user when an ESC goes from ONLINE to OFFLINE. This is done to prevent showing Offline ESCs warnings at boot
|
|
|
|
for (int index = 0; index < esc_status.esc_count; index++) {
|
|
if ((esc_status.esc_online_flags & (1 << index)) == 0) {
|
|
snprintf(esc_fail_msg + strlen(esc_fail_msg), sizeof(esc_fail_msg) - strlen(esc_fail_msg), "ESC%d ", index + 1);
|
|
esc_fail_msg[sizeof(esc_fail_msg) - 1] = '\0';
|
|
events::px4::enums::suggested_action_t action = _arm_state_machine.isArmed() ?
|
|
events::px4::enums::suggested_action_t::land :
|
|
events::px4::enums::suggested_action_t::none;
|
|
// TODO: use esc_status.esc[index].actuator_function as index after SYS_CTRL_ALLOC becomes default
|
|
events::send<uint8_t, events::px4::enums::suggested_action_t>(events::ID("commander_esc_offline"),
|
|
events::Log::Critical, "ESC{1} offline. {2}", index + 1, action);
|
|
}
|
|
}
|
|
|
|
mavlink_log_critical(&_mavlink_log_pub, "%soffline. %s\t", esc_fail_msg,
|
|
_arm_state_machine.isArmed() ? "Land now!" : "");
|
|
|
|
_last_esc_online_flags = esc_status.esc_online_flags;
|
|
_vehicle_status_flags.escs_error = true;
|
|
}
|
|
|
|
_vehicle_status_flags.escs_failure = false;
|
|
|
|
for (int index = 0; index < esc_status.esc_count; index++) {
|
|
|
|
_vehicle_status_flags.escs_failure |= esc_status.esc[index].failures > 0;
|
|
|
|
if (esc_status.esc[index].failures != _last_esc_failure[index]) {
|
|
|
|
for (uint8_t fault_index = 0; fault_index <= static_cast<uint8_t>(esc_fault_reason_t::_max);
|
|
fault_index++) {
|
|
if (esc_status.esc[index].failures & (1 << fault_index)) {
|
|
|
|
esc_fault_reason_t fault_reason_index = static_cast<esc_fault_reason_t>(fault_index);
|
|
|
|
const char *user_action = nullptr;
|
|
events::px4::enums::suggested_action_t action = events::px4::enums::suggested_action_t::none;
|
|
|
|
if (fault_reason_index == esc_fault_reason_t::motor_warn_temp
|
|
|| fault_reason_index == esc_fault_reason_t::esc_warn_temp) {
|
|
user_action = "Reduce throttle";
|
|
action = events::px4::enums::suggested_action_t::reduce_throttle;
|
|
|
|
} else {
|
|
user_action = "Land now!";
|
|
action = events::px4::enums::suggested_action_t::land;
|
|
}
|
|
|
|
mavlink_log_emergency(&_mavlink_log_pub, "ESC%d: %s. %s \t", index + 1,
|
|
esc_fault_reason_str(fault_reason_index), _arm_state_machine.isArmed() ? user_action : "");
|
|
|
|
events::send<uint8_t, events::px4::enums::esc_fault_reason_t, events::px4::enums::suggested_action_t>
|
|
(events::ID("commander_esc_fault"), {events::Log::Emergency, events::LogInternal::Warning},
|
|
"ESC {1}: {2}. {3}", index + 1, fault_reason_index, action);
|
|
}
|
|
}
|
|
}
|
|
|
|
_last_esc_failure[index] = esc_status.esc[index].failures;
|
|
}
|
|
|
|
}
|
|
|
|
_last_esc_status_updated = esc_status.timestamp;
|
|
}
|
|
|
|
void Commander::send_parachute_command()
|
|
{
|
|
vehicle_command_s vcmd{};
|
|
vcmd.command = vehicle_command_s::VEHICLE_CMD_DO_PARACHUTE;
|
|
vcmd.param1 = static_cast<float>(vehicle_command_s::PARACHUTE_ACTION_RELEASE);
|
|
|
|
uORB::SubscriptionData<vehicle_status_s> vehicle_status_sub{ORB_ID(vehicle_status)};
|
|
vcmd.source_system = vehicle_status_sub.get().system_id;
|
|
vcmd.target_system = vehicle_status_sub.get().system_id;
|
|
vcmd.source_component = vehicle_status_sub.get().component_id;
|
|
vcmd.target_component = 161; // MAV_COMP_ID_PARACHUTE
|
|
|
|
uORB::Publication<vehicle_command_s> vcmd_pub{ORB_ID(vehicle_command)};
|
|
vcmd.timestamp = hrt_absolute_time();
|
|
vcmd_pub.publish(vcmd);
|
|
|
|
set_tune_override(tune_control_s::TUNE_ID_PARACHUTE_RELEASE);
|
|
}
|
|
|
|
void Commander::checkWindSpeedThresholds()
|
|
{
|
|
wind_s wind_estimate;
|
|
|
|
if (_wind_sub.update(&wind_estimate)) {
|
|
const matrix::Vector2f wind(wind_estimate.windspeed_north, wind_estimate.windspeed_east);
|
|
|
|
// publish a warning if it's the first since in air or 60s have passed since the last warning
|
|
const bool warning_timeout_passed = _last_wind_warning == 0 || hrt_elapsed_time(&_last_wind_warning) > 60_s;
|
|
|
|
if (_param_com_wind_max.get() > FLT_EPSILON
|
|
&& wind.longerThan(_param_com_wind_max.get())
|
|
&& _commander_state.main_state != commander_state_s::MAIN_STATE_AUTO_RTL
|
|
&& _commander_state.main_state != commander_state_s::MAIN_STATE_AUTO_LAND) {
|
|
|
|
main_state_transition(_vehicle_status, commander_state_s::MAIN_STATE_AUTO_RTL, _vehicle_status_flags, _commander_state);
|
|
_status_changed = true;
|
|
mavlink_log_critical(&_mavlink_log_pub, "Wind speeds above limit, abort operation and RTL (%.1f m/s)\t",
|
|
(double)wind.norm());
|
|
|
|
events::send<float>(events::ID("commander_high_wind_rtl"),
|
|
{events::Log::Warning, events::LogInternal::Info},
|
|
"Wind speeds above limit, abort operation and RTL ({1:.1m/s})", wind.norm());
|
|
|
|
} else if (_param_com_wind_warn.get() > FLT_EPSILON
|
|
&& wind.longerThan(_param_com_wind_warn.get())
|
|
&& warning_timeout_passed
|
|
&& _commander_state.main_state != commander_state_s::MAIN_STATE_AUTO_RTL
|
|
&& _commander_state.main_state != commander_state_s::MAIN_STATE_AUTO_LAND) {
|
|
|
|
mavlink_log_critical(&_mavlink_log_pub, "High wind speed detected (%.1f m/s), landing advised\t", (double)wind.norm());
|
|
|
|
events::send<float>(events::ID("commander_high_wind_warning"),
|
|
{events::Log::Warning, events::LogInternal::Info},
|
|
"High wind speed detected ({1:.1m/s}), landing advised", wind.norm());
|
|
_last_wind_warning = hrt_absolute_time();
|
|
}
|
|
}
|
|
}
|
|
|
|
int Commander::print_usage(const char *reason)
|
|
{
|
|
if (reason) {
|
|
PX4_INFO("%s", reason);
|
|
}
|
|
|
|
PRINT_MODULE_DESCRIPTION(
|
|
R"DESCR_STR(
|
|
### Description
|
|
The commander module contains the state machine for mode switching and failsafe behavior.
|
|
)DESCR_STR");
|
|
|
|
PRINT_MODULE_USAGE_NAME("commander", "system");
|
|
PRINT_MODULE_USAGE_COMMAND("start");
|
|
PRINT_MODULE_USAGE_PARAM_FLAG('h', "Enable HIL mode", true);
|
|
#ifndef CONSTRAINED_FLASH
|
|
PRINT_MODULE_USAGE_COMMAND_DESCR("calibrate", "Run sensor calibration");
|
|
PRINT_MODULE_USAGE_ARG("mag|baro|accel|gyro|level|esc|airspeed", "Calibration type", false);
|
|
PRINT_MODULE_USAGE_ARG("quick", "Quick calibration (accel only, not recommended)", false);
|
|
PRINT_MODULE_USAGE_COMMAND_DESCR("check", "Run preflight checks");
|
|
PRINT_MODULE_USAGE_COMMAND("arm");
|
|
PRINT_MODULE_USAGE_PARAM_FLAG('f', "Force arming (do not run preflight checks)", true);
|
|
PRINT_MODULE_USAGE_COMMAND("disarm");
|
|
PRINT_MODULE_USAGE_PARAM_FLAG('f', "Force disarming (disarm in air)", true);
|
|
PRINT_MODULE_USAGE_COMMAND("takeoff");
|
|
PRINT_MODULE_USAGE_COMMAND("land");
|
|
PRINT_MODULE_USAGE_COMMAND_DESCR("transition", "VTOL transition");
|
|
PRINT_MODULE_USAGE_COMMAND_DESCR("mode", "Change flight mode");
|
|
PRINT_MODULE_USAGE_ARG("manual|acro|offboard|stabilized|altctl|posctl|auto:mission|auto:loiter|auto:rtl|auto:takeoff|auto:land|auto:precland",
|
|
"Flight mode", false);
|
|
PRINT_MODULE_USAGE_COMMAND("pair");
|
|
PRINT_MODULE_USAGE_COMMAND("lockdown");
|
|
PRINT_MODULE_USAGE_ARG("on|off", "Turn lockdown on or off", false);
|
|
PRINT_MODULE_USAGE_COMMAND("set_ekf_origin");
|
|
PRINT_MODULE_USAGE_ARG("lat, lon, alt", "Origin Latitude, Longitude, Altitude", false);
|
|
PRINT_MODULE_USAGE_COMMAND_DESCR("lat|lon|alt", "Origin latitude longitude altitude");
|
|
PRINT_MODULE_USAGE_COMMAND_DESCR("poweroff", "Power off board (if supported)");
|
|
#endif
|
|
PRINT_MODULE_USAGE_DEFAULT_COMMANDS();
|
|
|
|
return 1;
|
|
}
|