fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-11-15 15:21:36 +08:00
Code Issues Packages Projects Releases Wiki Activity
Files
431a0cb11e6f1cf6044e7ec79ae934e23aaa2876
PX4-Autopilot/boards/px4/fmu-v4pro/src/board_config.h
T
Daniel Agar 709961ec8c InvenSense ICM20602 and ICM20608-G: new standalone optimized drivers 
- uses the FIFO and SPI DMA to transfer full raw data (8 kHz gyro, 4 kHz accel)
 - new sensor messages for better visibility
   - sensor_{accel, gyro}_fifo: full raw data for optional logging and analysis
   - sensor_{accel, gyro}_status: metadata, clipping, etc
 - currently not enabled by default
2019-12-03 23:21:32 -05:00

372 lines
17 KiB
C
Raw Blame History

/****************************************************************************
*
* Copyright (c) 2013-2016 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file board_config.h
*
* PX4FMUv4Pro internal definitions
*/
#pragma once
/****************************************************************************************************
* Included Files
****************************************************************************************************/
#include <px4_platform_common/px4_config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
/****************************************************************************************************
* Definitions
****************************************************************************************************/
/* PX4IO connection configuration */
#define BOARD_USES_PX4IO_VERSION 2
#define PX4IO_SERIAL_DEVICE "/dev/ttyS4"
#define PX4IO_SERIAL_TX_GPIO GPIO_USART6_TX
#define PX4IO_SERIAL_RX_GPIO GPIO_USART6_RX
#define PX4IO_SERIAL_BASE STM32_USART6_BASE /* hardwired on the board */
#define PX4IO_SERIAL_VECTOR STM32_IRQ_USART6
#define PX4IO_SERIAL_TX_DMAMAP DMAMAP_USART6_TX_2
#define PX4IO_SERIAL_RX_DMAMAP DMAMAP_USART6_RX_2
#define PX4IO_SERIAL_RCC_REG STM32_RCC_APB2ENR
#define PX4IO_SERIAL_RCC_EN RCC_APB2ENR_USART6EN
#define PX4IO_SERIAL_CLOCK STM32_PCLK2_FREQUENCY
#define PX4IO_SERIAL_BITRATE 1500000 /* 1.5Mbps -> max rate for IO */
/* Configuration ************************************************************************************/
//{GPIO_RSSI_IN, 0, 0}, - pio Analog used as PWM
//{0, GPIO_LED_SAFETY, 0}, pio replacement
//{GPIO_SAFETY_SWITCH_IN, 0, 0}, pio replacement
//{0, GPIO_PERIPH_3V3_EN, 0}, Owned by the 8266 driver
//{0, GPIO_SBUS_INV, 0}, https://github.com/PX4/Firmware/blob/master/src/modules/px4iofirmware/sbus.c
//{GPIO_8266_GPIO0, 0, 0}, Owned by the 8266 driver
//{0, GPIO_SPEKTRUM_PWR_EN, 0}, Owned Spektum driver input to auto pilot
//{0, GPIO_8266_PD, 0}, Owned by the 8266 driver
//{0, GPIO_8266_RST, 0}, Owned by the 8266 driver
/* PX4FMU GPIOs ***********************************************************************************/
/* LEDs */
#define GPIO_LED1 (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN11)
#define GPIO_LED2 (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN1)
#define GPIO_LED3 (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN3)
#define GPIO_LED_RED GPIO_LED1
#define GPIO_LED_GREEN GPIO_LED2
#define GPIO_LED_BLUE GPIO_LED3
#define BOARD_HAS_CONTROL_STATUS_LEDS 1
#define BOARD_OVERLOAD_LED LED_RED
#define BOARD_ARMED_LED LED_BLUE
#define BOARD_ARMED_STATE_LED LED_GREEN
/* Define the Chip Selects */
/* SPI Bus 1 Internal Sensors */
#define GPIO_SPI_CS_MPU9250 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN2)
#define GPIO_SPI_CS_LIS3MDL (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN15)
#define GPIO_SPI_CS_MS5611 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN7)
#define GPIO_SPI_CS_ICM_2060X (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN15)
#define GPIO_SPI_CS_TEMPCAL_EEPROM (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTH|GPIO_PIN5)
/* SPI Bus 2 Memory */
#define GPIO_SPI_CS_FRAM (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN10)
/* Aux Chip selects (not pined out on RC0 HW) */
#define GPIO_AUX_CS0 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTF|GPIO_PIN10)
#define GPIO_AUX_CS1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTF|GPIO_PIN11)
#define GPIO_AUX_CS2 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTF|GPIO_PIN12)
#define GPIO_AUX_CS3 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTF|GPIO_PIN13)
#define GPIO_AUX_CS4 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTF|GPIO_PIN14)
#define GPIO_AUX_CS5 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTF|GPIO_PIN15)
/* External Chip selects on Connectors ahead PAD3 */
#define GPIO_SPI5_CS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTF|GPIO_PIN6)
#define GPIO_SPI6_CS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTG|GPIO_PIN11)
/* Define the Ready interrupts */
#define GPIO_DRDY_MPU9250 (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTD|GPIO_PIN15)
#define GPIO_DRDY_LIS3MDL (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTE|GPIO_PIN12)
#define GPIO_DRDY_ICM_2060X (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTC|GPIO_PIN14)
/*
* Define the ability to shut off off the sensor signals
* by changing the signals to inputs
*/
#define _PIN_OFF(def) (((def) & (GPIO_PORT_MASK | GPIO_PIN_MASK)) | (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz))
#define GPIO_SPI_CS_OFF_MPU9250 _PIN_OFF(GPIO_SPI_CS_MPU9250)
#define GPIO_SPI_CS_OFF_LIS3MDL _PIN_OFF(GPIO_SPI_CS_LIS3MDL)
#define GPIO_SPI_CS_OFF_MS5611 _PIN_OFF(GPIO_SPI_CS_MS5611)
#define GPIO_SPI_CS_OFF_ICM_2060X _PIN_OFF(GPIO_SPI_CS_ICM_2060X)
#define GPIO_SPI_CS_OFF_TEMPCAL_EEPROM _PIN_OFF(GPIO_SPI_CS_OFF_TEMPCAL_EEPROM)
#define GPIO_DRDY_OFF_MPU9250 _PIN_OFF(GPIO_DRDY_MPU9250)
#define GPIO_DRDY_OFF_LIS3MDL _PIN_OFF(GPIO_DRDY_LIS3MDL)
#define GPIO_DRDY_OFF_ICM_2060X _PIN_OFF(GPIO_DRDY_ICM_2060X)
/* SPI1 off */
#define GPIO_SPI1_SCK_OFF _PIN_OFF(GPIO_SPI1_SCK)
#define GPIO_SPI1_MISO_OFF _PIN_OFF(GPIO_SPI1_MISO)
#define GPIO_SPI1_MOSI_OFF _PIN_OFF(GPIO_SPI1_MOSI)
#define PX4_SPI_BUS_SENSORS 1
#define PX4_SPI_BUS_RAMTRON 2
#define PX4_SPI_BUS_BARO PX4_SPI_BUS_SENSORS
#define PX4_SPI_BUS_EXT0 5
#define PX4_SPI_BUS_EXT1 6
#define PX4_SPI_BUS_EXT PX4_SPI_BUS_EXT0
/* Use these in place of the uint32_t enumeration to select a specific SPI device on SPI1 */
#define PX4_SPIDEV_BARO PX4_MK_SPI_SEL(PX4_SPI_BUS_SENSORS, 1)
#define PX4_SPIDEV_MPU PX4_MK_SPI_SEL(PX4_SPI_BUS_SENSORS, 2)
#define PX4_SPIDEV_HMC PX4_MK_SPI_SEL(PX4_SPI_BUS_SENSORS, 3)
#define PX4_SPIDEV_LIS PX4_MK_SPI_SEL(PX4_SPI_BUS_SENSORS, 4)
#define PX4_SPIDEV_EEPROM PX4_MK_SPI_SEL(PX4_SPI_BUS_SENSORS, 5)
#define PX4_SPIDEV_ICM_20608 PX4_MK_SPI_SEL(PX4_SPI_BUS_SENSORS, 6)
#define PX4_SPIDEV_ICM_20602 PX4_MK_SPI_SEL(PX4_SPI_BUS_SENSORS, 7)
#define PX4_SPIDEV_EXT0 PX4_MK_SPI_SEL(PX4_SPI_BUS_EXT0, 1)
#define PX4_SPIDEV_EXT1 PX4_MK_SPI_SEL(PX4_SPI_BUS_EXT1, 1)
#define PX4_SPIDEV_RM_EXT PX4_SPIDEV_EXT0
/* I2C busses */
#define PX4_I2C_BUS_ONBOARD 1
#define PX4_I2C_BUS_EXPANSION 2
#define PX4_I2C_BUS_LED PX4_I2C_BUS_ONBOARD
/*
* ADC channels
*
* These are the channel numbers of the ADCs of the microcontroller that can be used by the Px4 Firmware in the adc driver
*/
// ADC defines to be used in sensors.cpp to read from a particular channel
#define ADC_BATTERY1_VOLTAGE_CHANNEL 2 // PA2
#define ADC_BATTERY1_CURRENT_CHANNEL 3 // PA3
#define ADC_5V_RAIL_SENSE 4 // PA4
#define ADC_BATTERY2_VOLTAGE_CHANNEL 11 // PC1
#define ADC_BATTERY2_CURRENT_CHANNEL 13 // PC3
#define ADC_CHANNELS (1 << ADC_BATTERY1_VOLTAGE_CHANNEL) | (1 << ADC_BATTERY1_CURRENT_CHANNEL) | \
(1 << ADC_5V_RAIL_SENSE) | \
(1 << ADC_BATTERY2_VOLTAGE_CHANNEL) | (1 << ADC_BATTERY2_CURRENT_CHANNEL)
/* Define Battery 1 Voltage Divider and A per V
*/
#define BOARD_BATTERY1_V_DIV (6.490196078f)
#define BOARD_BATTERY1_A_PER_V (26.4f)
/* Define Battery 2 Voltage Divider and A per V
*/
#define BOARD_BATTERY2_V_DIV (6.490196078f)
#define BOARD_BATTERY2_A_PER_V (26.4f)
/* Define LTC4417 UV set by resistors on the board that are different than FMUv2 3.7V */
#define BOARD_VALID_UV (4.01f)
/* User GPIOs
*
* GPIO0-5 are the PWM servo outputs.
*/
#define GPIO_GPIO0_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN14)
#define GPIO_GPIO1_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN13)
#define GPIO_GPIO2_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN11)
#define GPIO_GPIO3_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN9)
#define GPIO_GPIO4_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTD|GPIO_PIN13)
#define GPIO_GPIO5_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTD|GPIO_PIN14)
#define GPIO_GPIO0_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN14)
#define GPIO_GPIO1_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN13)
#define GPIO_GPIO2_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN11)
#define GPIO_GPIO3_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN9)
#define GPIO_GPIO4_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN13)
#define GPIO_GPIO5_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN14)
/* Power supply control and monitoring GPIOs */
#define GPIO_nVDD_BRICK1_VALID (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN5)
#define GPIO_nVDD_BRICK2_VALID (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN5)
#define BOARD_NUMBER_BRICKS 2
#define GPIO_nVDD_USB_VALID (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN0)
#define GPIO_VDD_3V3_SENSORS_EN (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN3)
#define GPIO_VDD_3V3_PERIPH_EN (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN5)
#define GPIO_VDD_5V_PERIPH_EN (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN10)
#define GPIO_VDD_5V_HIPOWER_EN (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN4)
#define GPIO_VDD_5V_PERIPH_OC (GPIO_INPUT|GPIO_FLOAT|GPIO_PORTG|GPIO_PIN4)
#define GPIO_VDD_5V_HIPOWER_OC (GPIO_INPUT|GPIO_FLOAT|GPIO_PORTF|GPIO_PIN3)
/* Tone alarm output */
#define TONE_ALARM_TIMER 2 /* timer 2 */
#define TONE_ALARM_CHANNEL 1 /* channel 1 */
#define GPIO_TONE_ALARM_IDLE (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN15)
#define GPIO_TONE_ALARM (GPIO_ALT|GPIO_AF1|GPIO_SPEED_2MHz|GPIO_PUSHPULL|GPIO_PORTA|GPIO_PIN15)
/* PWM
*
* Six PWM outputs are configured.
*
* Pins:
*
* CH1 : PE14 : TIM1_CH4
* CH2 : PE13 : TIM1_CH3
* CH3 : PE11 : TIM1_CH2
* CH4 : PE9 : TIM1_CH1
* CH5 : PD13 : TIM4_CH2
* CH6 : PD14 : TIM4_CH3
*/
#define GPIO_TIM1_CH1OUT (GPIO_ALT|GPIO_AF1|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PUSHPULL|GPIO_PORTE|GPIO_PIN9)
#define GPIO_TIM1_CH2OUT (GPIO_ALT|GPIO_AF1|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PUSHPULL|GPIO_PORTE|GPIO_PIN11)
#define GPIO_TIM1_CH3OUT (GPIO_ALT|GPIO_AF1|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PUSHPULL|GPIO_PORTE|GPIO_PIN13)
#define GPIO_TIM1_CH4OUT (GPIO_ALT|GPIO_AF1|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PUSHPULL|GPIO_PORTE|GPIO_PIN14)
#define GPIO_TIM4_CH2OUT (GPIO_ALT|GPIO_AF2|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PUSHPULL|GPIO_PORTD|GPIO_PIN13)
#define GPIO_TIM4_CH3OUT (GPIO_ALT|GPIO_AF2|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PUSHPULL|GPIO_PORTD|GPIO_PIN14)
#define DIRECT_PWM_OUTPUT_CHANNELS 6
#define GPIO_TIM1_CH1IN GPIO_TIM1_CH1IN_2
#define GPIO_TIM1_CH2IN GPIO_TIM1_CH2IN_2
#define GPIO_TIM1_CH3IN GPIO_TIM1_CH3IN_2
#define GPIO_TIM1_CH4IN GPIO_TIM1_CH4IN_2
#define GPIO_TIM4_CH2IN GPIO_TIM4_CH2IN_2
#define GPIO_TIM4_CH3IN GPIO_TIM4_CH3IN_2
#define DIRECT_INPUT_TIMER_CHANNELS 6
/* USB OTG FS
*
* PA9 OTG_FS_VBUS VBUS sensing
*/
#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTA|GPIO_PIN9)
/* High-resolution timer */
#define HRT_TIMER 3 /* use timer 3 for the HRT */
#define HRT_TIMER_CHANNEL 4 /* use capture/compare channel 4 */
#define HRT_PPM_CHANNEL 3 /* use capture/compare channel 3 */
#define GPIO_PPM_IN (GPIO_ALT|GPIO_AF2|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN0)
/* PWM input driver. Use FMU AUX5 pins attached to timer4 channel 2 */
#define PWMIN_TIMER 4
#define PWMIN_TIMER_CHANNEL 2
#define GPIO_PWM_IN GPIO_TIM4_CH2IN_2
/* N.B. By the virtue of not being named GPIO_BTN_SAFETY, this pin is
* initialized but not used (compiled for) in the FMU module
*/
#define GPIO_BTN_SAFETY_FMU (GPIO_INPUT|GPIO_FLOAT|GPIO_PORTC|GPIO_PIN4)
#define GPIO_SBUS_INV (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN13)
#define GPIO_8266_GPIO0 (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN2)
//TODO: fo not see on schematic #define GPIO_SPEKTRUM_PWR_EN (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN4)
#define GPIO_8266_PD (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN5)
#define GPIO_8266_RST (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN6)
/* No Power switch controls or binding control *********************************************
* V4 Pro does not have control to bind SPEKTRUM - there is only 5V VCC on
* the connector interface and Spektrum requires VDD 3v3 to be controllable
*/
/* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction)
* this board support the ADC system_power interface, and therefore
* provides the true logic GPIO BOARD_ADC_xxxx macros.
*/
#define BOARD_ADC_USB_CONNECTED (px4_arch_gpioread(GPIO_OTGFS_VBUS))
#define BOARD_ADC_BRICK1_VALID (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
#define BOARD_ADC_BRICK2_VALID (!px4_arch_gpioread(GPIO_nVDD_BRICK2_VALID))
#define BOARD_ADC_USB_VALID (!px4_arch_gpioread(GPIO_nVDD_USB_VALID))
#define BOARD_ADC_SERVO_VALID (1)
#define BOARD_ADC_PERIPH_5V_OC (!px4_arch_gpioread(GPIO_VDD_5V_PERIPH_OC))
#define BOARD_ADC_HIPOWER_5V_OC (!px4_arch_gpioread(GPIO_VDD_5V_HIPOWER_OC))
#define BOARD_HAS_PWM DIRECT_PWM_OUTPUT_CHANNELS
/* This board provides a DMA pool and APIs. */
#define BOARD_DMA_ALLOC_POOL_SIZE (5120 + 512 + 1008) // 5120 fat + 512 + 1008 spi
#define BOARD_HAS_ON_RESET 1
#define BOARD_HAS_STATIC_MANIFEST 1
__BEGIN_DECLS
/****************************************************************************************************
* Public Types
****************************************************************************************************/
/****************************************************************************************************
* Public data
****************************************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************************************
* Public Functions
****************************************************************************************************/
/****************************************************************************************************
* Name: stm32_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the PX4FMU board.
*
****************************************************************************************************/
extern void stm32_spiinitialize(void);
void board_spi_reset(int ms);
extern void stm32_usbinitialize(void);
extern void board_peripheral_reset(int ms);
#include <px4_platform_common/board_common.h>
#endif /* __ASSEMBLY__ */
__END_DECLS
Reference in New Issue View Git Blame Copy Permalink