mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-04-14 10:07:39 +08:00
cea185268e
- update all msgs to be directly compatible with ROS2 - microdds_client improvements - timesync - reduced code size - add to most default builds if we can afford it - lots of other little changes - purge fastrtps (I tried to save this multiple times, but kept hitting roadblocks)
24 lines
2.3 KiB
Plaintext
24 lines
2.3 KiB
Plaintext
uint64 timestamp # time since system start (microseconds)
|
|
|
|
bool torque_setpoint_achieved # Boolean indicating whether the 3D torque setpoint was correctly allocated to actuators. 0 if not achieved, 1 if achieved.
|
|
float32[3] allocated_torque # Torque allocated to actuators. Equal to `vehicle_torque_setpoint_s::xyz` if the setpoint was achieved.
|
|
float32[3] unallocated_torque # Unallocated torque. Equal to 0 if the setpoint was achieved.
|
|
# Computed as: unallocated_torque = torque_setpoint - allocated_torque
|
|
|
|
bool thrust_setpoint_achieved # Boolean indicating whether the 3D thrust setpoint was correctly allocated to actuators. 0 if not achieved, 1 if achieved.
|
|
float32[3] allocated_thrust # Thrust allocated to actuators. Equal to `vehicle_thrust_setpoint_s::xyz` if the setpoint was achieved.
|
|
float32[3] unallocated_thrust # Unallocated thrust. Equal to 0 if the setpoint was achieved.
|
|
# Computed as: unallocated_thrust = thrust_setpoint - allocated_thrust
|
|
|
|
int8 ACTUATOR_SATURATION_OK = 0 # The actuator is not saturated
|
|
int8 ACTUATOR_SATURATION_UPPER_DYN = 1 # The actuator is saturated (with a value <= the desired value) because it cannot increase its value faster
|
|
int8 ACTUATOR_SATURATION_UPPER = 2 # The actuator is saturated (with a value <= the desired value) because it has reached its maximum value
|
|
int8 ACTUATOR_SATURATION_LOWER_DYN = -1 # The actuator is saturated (with a value >= the desired value) because it cannot decrease its value faster
|
|
int8 ACTUATOR_SATURATION_LOWER = -2 # The actuator is saturated (with a value >= the desired value) because it has reached its minimum value
|
|
|
|
int8[16] actuator_saturation # Indicates actuator saturation status.
|
|
# Note 1: actuator saturation does not necessarily imply that the thrust setpoint or the torque setpoint were not achieved.
|
|
# Note 2: an actuator with limited dynamics can be indicated as upper-saturated even if it as not reached its maximum value.
|
|
|
|
uint16 handled_motor_failure_mask # Bitmask of failed motors that were removed from the allocation / effectiveness matrix. Not necessarily identical to the report from FailureDetector
|