mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-04-14 10:07:39 +08:00
aa244a098c
Changed all 'NED' references to 'FRD'. Also cleaned up mixing of m/s/s and m/s^2 to use the latter. Corrected m/s/s to Pascals. Plus minor typos. Also made some minor cosmetic clean ups. Co-authored-by: Robin <robin@Robins-MacBook-Pro-Work.local> Co-authored-by: Mathieu Bresciani <brescianimathieu@gmail.com>
30 lines
1.9 KiB
Plaintext
30 lines
1.9 KiB
Plaintext
#
|
|
# Sensor corrections in SI-unit form for the voted sensor
|
|
#
|
|
|
|
uint64 timestamp # time since system start (microseconds)
|
|
|
|
# Corrections for gyro angular rate outputs where corrected_rate = raw_rate * gyro_scale + gyro_offset
|
|
# Note the corrections are in the sensor frame and must be applied before the sensor data is rotated into body frame
|
|
uint32[4] gyro_device_ids
|
|
float32[3] gyro_offset_0 # gyro 0 XYZ offsets in the sensor frame in rad/s
|
|
float32[3] gyro_offset_1 # gyro 1 XYZ offsets in the sensor frame in rad/s
|
|
float32[3] gyro_offset_2 # gyro 2 XYZ offsets in the sensor frame in rad/s
|
|
float32[3] gyro_offset_3 # gyro 3 XYZ offsets in the sensor frame in rad/s
|
|
|
|
# Corrections for acceleromter acceleration outputs where corrected_accel = raw_accel * accel_scale + accel_offset
|
|
# Note the corrections are in the sensor frame and must be applied before the sensor data is rotated into body frame
|
|
uint32[4] accel_device_ids
|
|
float32[3] accel_offset_0 # accelerometer 0 offsets in the FRD board frame XYZ-axis in m/s^s
|
|
float32[3] accel_offset_1 # accelerometer 1 offsets in the FRD board frame XYZ-axis in m/s^s
|
|
float32[3] accel_offset_2 # accelerometer 2 offsets in the FRD board frame XYZ-axis in m/s^s
|
|
float32[3] accel_offset_3 # accelerometer 3 offsets in the FRD board frame XYZ-axis in m/s^s
|
|
|
|
# Corrections for barometric pressure outputs where corrected_pressure = raw_pressure * pressure_scale + pressure_offset
|
|
# Note the corrections are in the sensor frame and must be applied before the sensor data is rotated into body frame
|
|
uint32[4] baro_device_ids
|
|
float32 baro_offset_0 # barometric pressure 0 offsets in the sensor frame in Pascals
|
|
float32 baro_offset_1 # barometric pressure 1 offsets in the sensor frame in Pascals
|
|
float32 baro_offset_2 # barometric pressure 2 offsets in the sensor frame in Pascals
|
|
float32 baro_offset_3 # barometric pressure 3 offsets in the sensor frame in Pascals
|