David Sidrane 0385245ae1 px4_fmu-v5: Disable OTG_ID_GPIO

2021-05-05 20:48:06 +02:00

..

bootloader

ROMFS handle bl_update generically

2021-03-11 00:38:18 +01:00

init

add board architecture specific init defaults

2021-03-09 19:59:41 +01:00

nuttx-config

px4_fmu-v5: Disable OTG_ID_GPIO

2021-05-05 20:48:06 +02:00

src

px4_fmu-v5: Initalize PWM as input with Pull Downs

2021-05-05 20:48:06 +02:00

ctrlalloc.cmake

boards: move testing to dedicated test variants

2021-04-14 09:21:31 +02:00

debug.cmake

boards: move testing to dedicated test variants

2021-04-14 09:21:31 +02:00

default.cmake

Create publish_status() method in the heater driver, add a status field to indicate if the temperature setpoint has been met within 2.5C, breakout update_params() method from the Heater::Run() method and simplify logic.

2021-04-16 08:09:51 -04:00

firmware.prototype

boards organization

2018-11-26 14:40:14 -08:00

fixedwing.cmake

icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass)

2021-04-04 21:18:16 -04:00

multicopter.cmake

boards: move testing to dedicated test variants

2021-04-14 09:21:31 +02:00

optimized.cmake

boards: px4_fmu-v5_optimized disable temperature_compensation to save flash

2021-05-04 21:20:32 -04:00

rover.cmake

icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass)

2021-04-04 21:18:16 -04:00

rtps.cmake

boards: move testing to dedicated test variants

2021-04-14 09:21:31 +02:00

stackcheck.cmake

boards: move testing to dedicated test variants

2021-04-14 09:21:31 +02:00

test.cmake

boards: move testing to dedicated test variants

2021-04-14 09:21:31 +02:00

uavcanv0periph.cmake

boards: move testing to dedicated test variants

2021-04-14 09:21:31 +02:00

uavcanv1.cmake

boards: move testing to dedicated test variants

2021-04-14 09:21:31 +02:00