Files
PX4-Autopilot/boards/radiolink/PIX6/nuttx-config/scripts/memory.ld
Radiolink 2ec0407815 boards: add Radiolink PIX6 (#25562)
* boards: add Radiolink PIX6

* Fix newlines and format issues

* Fix newlines issues

* docs:add radiolink_pix6.md document

* Subedit, prettier, get images

* Add hero image

* docs:Add some necessary instructions

* Subedit

---------

Co-authored-by: Ubuntu <diaohuayuan@radiolink.com.cn>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
2025-09-24 16:17:43 -04:00

99 lines
3.9 KiB
Plaintext

/****************************************************************************
* scripts/memory.ld
*
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F765IIT6 has 2048 KiB of main FLASH memory. This FLASH memory
* can be accessed from either the AXIM interface at address 0x0800:0000 or
* from the ITCM interface at address 0x0020:0000.
*
* Additional information, including the option bytes, is available at at
* FLASH at address 0x1ff0:0000 (AXIM) or 0x0010:0000 (ITCM).
*
* In the STM32F765IIT6, two different boot spaces can be selected through
* the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
* BOOT_ADD1 option bytes:
*
* 1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
* ST programmed value: Flash on ITCM at 0x0020:0000
* 2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
* ST programmed value: System bootloader at 0x0010:0000
*
* NuttX does not modify these option byes. On the unmodified NUCLEO-144
* board, the BOOT0 pin is at ground so by default, the STM32F765IIT6 will
* boot from address 0x0020:0000 in ITCM FLASH.
*
* The STM32F765IIT6 also has 512 KiB of data SRAM (in addition to ITCM SRAM).
* SRAM is split up into three blocks:
*
* 1) 128 KiB of DTCM SRM beginning at address 0x2000:0000
* 2) 368 KiB of SRAM1 beginning at address 0x2002:0000
* 3) 16 KiB of SRAM2 beginning at address 0x2007:c000
*
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
* where the code expects to begin execution by jumping to the entry point in
* the 0x0800:0000 address range.
*
* Bootloader reserves the first 32K bank (2 Mbytes Flash memory single bank)
* organization (256 bits read width)
*/
MEMORY
{
/* ITCM boot address */
itcm (rwx) : ORIGIN = 0x00208000, LENGTH = 2048K-32K
/* 2048KB FLASH, bootloader reserves the first 32kb */
kflash (rx) : ORIGIN = 0x08008000, LENGTH = 1024K-32K
uflash (rx) : ORIGIN = 0x08100000, LENGTH = 1024K
/* ITCM RAM */
itcm_ram (rwx) : ORIGIN = 0x00000000, LENGTH = 16K
/* DTCM SRAM */
dtcm_ram (rwx) : ORIGIN = 0x20000000, LENGTH = 128K
/* 368KB of contiguous SRAM1 */
ksram (rwx) : ORIGIN = 0x20020000, LENGTH = 128K
usram (rwx) : ORIGIN = 0x20040000, LENGTH = 368K-128K
/* 16KB of SRAM2 */
sram2 (rwx) : ORIGIN = 0x2007c000, LENGTH = 16K
}