/**************************************************************************** * * Copyright (c) 2017 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name PX4 nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /* * tap_esc_common.cpp * */ #include "tap_esc_common.h" #include #include #include // arraySize #include #include #ifndef B250000 #define B250000 250000 #endif namespace tap_esc_common { static uint8_t crc8_esc(uint8_t *p, uint8_t len); static uint8_t crc_packet(EscPacket &p); void select_responder(uint8_t sel) { #if defined(GPIO_S0) px4_arch_gpiowrite(GPIO_S0, sel & 1); px4_arch_gpiowrite(GPIO_S1, sel & 2); px4_arch_gpiowrite(GPIO_S2, sel & 4); #endif } int initialise_uart(const char *const device, int &uart_fd) { // open uart uart_fd = open(device, O_RDWR | O_NOCTTY | O_NONBLOCK); int termios_state = -1; if (uart_fd < 0) { PX4_ERR("failed to open uart device!"); return -1; } // set baud rate int speed = B250000; struct termios uart_config; tcgetattr(uart_fd, &uart_config); // clear ONLCR flag (which appends a CR for every LF) uart_config.c_oflag &= ~ONLCR; // set baud rate if (cfsetispeed(&uart_config, speed) < 0 || cfsetospeed(&uart_config, speed) < 0) { PX4_ERR("failed to set baudrate for %s: %d\n", device, termios_state); close(uart_fd); return -1; } if ((termios_state = tcsetattr(uart_fd, TCSANOW, &uart_config)) < 0) { PX4_ERR("tcsetattr failed for %s\n", device); close(uart_fd); return -1; } // setup output flow control if (enable_flow_control(uart_fd, false)) { PX4_WARN("hardware flow disable failed"); } return 0; } int deinitialise_uart(int &uart_fd) { int ret = close(uart_fd); if (ret == 0) { uart_fd = -1; } return ret; } int enable_flow_control(int uart_fd, bool enabled) { struct termios uart_config; int ret = tcgetattr(uart_fd, &uart_config); if (ret != 0) { PX4_ERR("error getting uart configuration"); return ret; } if (enabled) { uart_config.c_cflag |= CRTSCTS; } else { uart_config.c_cflag &= ~CRTSCTS; } return tcsetattr(uart_fd, TCSANOW, &uart_config); } int send_packet(int uart_fd, EscPacket &packet, int responder) { if (responder >= 0) { select_responder(responder); } int packet_len = crc_packet(packet); int ret = ::write(uart_fd, &packet.head, packet_len); if (ret != packet_len) { PX4_WARN("TX ERROR: ret: %d, errno: %d", ret, errno); } return ret; } int read_data_from_uart(int uart_fd, ESC_UART_BUF *const uart_buf) { uint8_t tmp_serial_buf[UART_BUFFER_SIZE]; int len =::read(uart_fd, tmp_serial_buf, arraySize(tmp_serial_buf)); if (len > 0 && (uart_buf->dat_cnt + len < UART_BUFFER_SIZE)) { for (int i = 0; i < len; i++) { uart_buf->esc_feedback_buf[uart_buf->tail++] = tmp_serial_buf[i]; uart_buf->dat_cnt++; if (uart_buf->tail >= UART_BUFFER_SIZE) { uart_buf->tail = 0; } } } else if (len < 0) { return len; } return 0; } int parse_tap_esc_feedback(ESC_UART_BUF *const serial_buf, EscPacket *const packetdata) { static PARSR_ESC_STATE state = HEAD; static uint8_t data_index = 0; static uint8_t crc_data_cal; if (serial_buf->dat_cnt > 0) { int count = serial_buf->dat_cnt; for (int i = 0; i < count; i++) { switch (state) { case HEAD: if (serial_buf->esc_feedback_buf[serial_buf->head] == PACKET_HEAD) { packetdata->head = PACKET_HEAD; //just_keep the format state = LEN; } break; case LEN: if (serial_buf->esc_feedback_buf[serial_buf->head] < sizeof(packetdata->d)) { packetdata->len = serial_buf->esc_feedback_buf[serial_buf->head]; state = ID; } else { state = HEAD; } break; case ID: if (serial_buf->esc_feedback_buf[serial_buf->head] < ESCBUS_MSG_ID_MAX_NUM) { packetdata->msg_id = serial_buf->esc_feedback_buf[serial_buf->head]; data_index = 0; state = DATA; } else { state = HEAD; } break; case DATA: packetdata->d.bytes[data_index++] = serial_buf->esc_feedback_buf[serial_buf->head]; if (data_index >= packetdata->len) { crc_data_cal = crc8_esc((uint8_t *)(&packetdata->len), packetdata->len + 2); state = CRC; } break; case CRC: if (crc_data_cal == serial_buf->esc_feedback_buf[serial_buf->head]) { packetdata->crc_data = serial_buf->esc_feedback_buf[serial_buf->head]; if (++serial_buf->head >= UART_BUFFER_SIZE) { serial_buf->head = 0; } serial_buf->dat_cnt--; state = HEAD; return 0; } state = HEAD; break; default: state = HEAD; break; } if (++serial_buf->head >= UART_BUFFER_SIZE) { serial_buf->head = 0; } serial_buf->dat_cnt--; } } return -1; } static uint8_t crc8_esc(uint8_t *p, uint8_t len) { uint8_t crc = 0; for (uint8_t i = 0; i < len; i++) { crc = crc_table[crc^*p++]; } return crc; } static uint8_t crc_packet(EscPacket &p) { /* Calculate the crc over Len,ID,data */ p.d.bytes[p.len] = crc8_esc(&p.len, p.len + 2); return p.len + offsetof(EscPacket, d) + 1; } const uint8_t crc_table[256] = { 0x00, 0xE7, 0x29, 0xCE, 0x52, 0xB5, 0x7B, 0x9C, 0xA4, 0x43, 0x8D, 0x6A, 0xF6, 0x11, 0xDF, 0x38, 0xAF, 0x48, 0x86, 0x61, 0xFD, 0x1A, 0xD4, 0x33, 0x0B, 0xEC, 0x22, 0xC5, 0x59, 0xBE, 0x70, 0x97, 0xB9, 0x5E, 0x90, 0x77, 0xEB, 0x0C, 0xC2, 0x25, 0x1D, 0xFA, 0x34, 0xD3, 0x4F, 0xA8, 0x66, 0x81, 0x16, 0xF1, 0x3F, 0xD8, 0x44, 0xA3, 0x6D, 0x8A, 0xB2, 0x55, 0x9B, 0x7C, 0xE0, 0x07, 0xC9, 0x2E, 0x95, 0x72, 0xBC, 0x5B, 0xC7, 0x20, 0xEE, 0x09, 0x31, 0xD6, 0x18, 0xFF, 0x63, 0x84, 0x4A, 0xAD, 0x3A, 0xDD, 0x13, 0xF4, 0x68, 0x8F, 0x41, 0xA6, 0x9E, 0x79, 0xB7, 0x50, 0xCC, 0x2B, 0xE5, 0x02, 0x2C, 0xCB, 0x05, 0xE2, 0x7E, 0x99, 0x57, 0xB0, 0x88, 0x6F, 0xA1, 0x46, 0xDA, 0x3D, 0xF3, 0x14, 0x83, 0x64, 0xAA, 0x4D, 0xD1, 0x36, 0xF8, 0x1F, 0x27, 0xC0, 0x0E, 0xE9, 0x75, 0x92, 0x5C, 0xBB, 0xCD, 0x2A, 0xE4, 0x03, 0x9F, 0x78, 0xB6, 0x51, 0x69, 0x8E, 0x40, 0xA7, 0x3B, 0xDC, 0x12, 0xF5, 0x62, 0x85, 0x4B, 0xAC, 0x30, 0xD7, 0x19, 0xFE, 0xC6, 0x21, 0xEF, 0x08, 0x94, 0x73, 0xBD, 0x5A, 0x74, 0x93, 0x5D, 0xBA, 0x26, 0xC1, 0x0F, 0xE8, 0xD0, 0x37, 0xF9, 0x1E, 0x82, 0x65, 0xAB, 0x4C, 0xDB, 0x3C, 0xF2, 0x15, 0x89, 0x6E, 0xA0, 0x47, 0x7F, 0x98, 0x56, 0xB1, 0x2D, 0xCA, 0x04, 0xE3, 0x58, 0xBF, 0x71, 0x96, 0x0A, 0xED, 0x23, 0xC4, 0xFC, 0x1B, 0xD5, 0x32, 0xAE, 0x49, 0x87, 0x60, 0xF7, 0x10, 0xDE, 0x39, 0xA5, 0x42, 0x8C, 0x6B, 0x53, 0xB4, 0x7A, 0x9D, 0x01, 0xE6, 0x28, 0xCF, 0xE1, 0x06, 0xC8, 0x2F, 0xB3, 0x54, 0x9A, 0x7D, 0x45, 0xA2, 0x6C, 0x8B, 0x17, 0xF0, 0x3E, 0xD9, 0x4E, 0xA9, 0x67, 0x80, 0x1C, 0xFB, 0x35, 0xD2, 0xEA, 0x0D, 0xC3, 0x24, 0xB8, 0x5F, 0x91, 0x76 }; } /* tap_esc_common */