/**************************************************************************** * * Copyright (c) 2018, 2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name PX4 nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /** * @file board_config.h * * omnibusf4sd internal definitions */ #pragma once /**************************************************************************************************** * Included Files ****************************************************************************************************/ #include #include #include /**************************************************************************************************** * Definitions ****************************************************************************************************/ /* Configuration ************************************************************************************/ /* omnibusf4sd GPIOs ***********************************************************************************/ /* LEDs */ // power - green // LED1 - PB5 - blue #define GPIO_LED1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN5) #define GPIO_LED_BLUE GPIO_LED1 #define BOARD_OVERLOAD_LED LED_BLUE #define FLASH_BASED_PARAMS /* * ADC channels * * These are the channel numbers of the ADCs of the microcontroller that can be used by the Px4 Firmware in the adc driver */ #define ADC_CHANNELS (1 << 0) | (1 << 11) | (1 << 12) #define ADC_BATTERY_VOLTAGE_CHANNEL 12 #define ADC_BATTERY_CURRENT_CHANNEL 11 #define ADC_RC_RSSI_CHANNEL 0 /* User GPIOs * * GPIO0-5 are the PWM servo outputs. * GPIO_TIM3_CH3OUT GPIO_TIM3_CH3OUT_1 //PB0 S1_OUT D1_ST7 * GPIO_TIM3_CH4OUT GPIO_TIM3_CH4OUT_1 //PB1 S2_OUT D1_ST2 * GPIO_TIM2_CH4OUT GPIO_TIM2_CH4OUT_1 //PA3 S3_OUT D1_ST6 * GPIO_TIM2_CH3OUT GPIO_TIM2_CH3OUT_1 //PA2 S4_OUT D1_ST1 * GPIO_TIM5_CH2OUT GPIO_TIM5_CH2OUT_1 //PA1 S5_OUT * GPIO_TIM1_CH1OUT GPIO_TIM1_CH1OUT_1 //PA8 S6_OUT */ #define _MK_GPIO_INPUT(def) (((def) & (GPIO_PORT_MASK | GPIO_PIN_MASK)) | (GPIO_INPUT|GPIO_PULLUP)) #define GPIO_GPIO0_INPUT _MK_GPIO_INPUT(GPIO_TIM3_CH3IN) #define GPIO_GPIO1_INPUT _MK_GPIO_INPUT(GPIO_TIM3_CH4IN) #define GPIO_GPIO2_INPUT _MK_GPIO_INPUT(GPIO_TIM2_CH4IN) #define GPIO_GPIO3_INPUT _MK_GPIO_INPUT(GPIO_TIM2_CH3IN) //#define GPIO_GPIO4_INPUT _MK_GPIO_INPUT(GPIO_TIM5_CH2IN) //#define GPIO_GPIO5_INPUT _MK_GPIO_INPUT(GPIO_TIM1_CH1IN) #define _MK_GPIO_OUTPUT(def) (((def) & (GPIO_PORT_MASK | GPIO_PIN_MASK)) | (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR)) #define GPIO_GPIO0_OUTPUT _MK_GPIO_OUTPUT(GPIO_TIM3_CH3OUT) #define GPIO_GPIO1_OUTPUT _MK_GPIO_OUTPUT(GPIO_TIM3_CH4OUT) #define GPIO_GPIO2_OUTPUT _MK_GPIO_OUTPUT(GPIO_TIM2_CH4OUT) #define GPIO_GPIO3_OUTPUT _MK_GPIO_OUTPUT(GPIO_TIM2_CH3OUT) //#define GPIO_GPIO4_OUTPUT _MK_GPIO_OUTPUT(GPIO_TIM5_CH2OUT) //#define GPIO_GPIO5_OUTPUT _MK_GPIO_OUTPUT(GPIO_TIM1_CH1OUT) /* USB OTG FS * * PA9 OTG_FS_VBUS VBUS sensing */ #define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTC|GPIO_PIN5) /* PWM * * Alternatively CH3/CH4 could be assigned to UART6_TX/RX */ #define DIRECT_PWM_OUTPUT_CHANNELS 4 /* High-resolution timer */ #define HRT_TIMER 4 // T4C1 #define HRT_TIMER_CHANNEL 1 // use capture/compare channel 1 #define HRT_PPM_CHANNEL 3 // capture/compare channel 3 #define GPIO_PPM_IN (GPIO_ALT|GPIO_AF2|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN8) #define RC_SERIAL_PORT "/dev/ttyS0" #define BOARD_SUPPORTS_RC_SERIAL_PORT_OUTPUT /* * One RC_IN * * GPIO PPM_IN on PB8 T4CH3 * SPEKTRUM_RX (it's TX or RX in Bind) on PA10 UART1 * The FMU can drive GPIO PPM_IN as an output */ // TODO? //#define GPIO_PPM_IN_AS_OUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN6) //#define SPEKTRUM_RX_AS_GPIO_OUTPUT() px4_arch_configgpio(GPIO_PPM_IN_AS_OUT) //#define SPEKTRUM_RX_AS_UART() px4_arch_configgpio(GPIO_USART1_RX) //#define SPEKTRUM_OUT(_one_true) px4_arch_gpiowrite(GPIO_PPM_IN_AS_OUT, (_one_true)) /* This board provides a DMA pool and APIs */ #define BOARD_DMA_ALLOC_POOL_SIZE 5120 #define BOARD_HAS_ON_RESET 1 __BEGIN_DECLS /**************************************************************************************************** * Public Types ****************************************************************************************************/ /**************************************************************************************************** * Public data ****************************************************************************************************/ #ifndef __ASSEMBLY__ /**************************************************************************************************** * Public Functions ****************************************************************************************************/ /**************************************************************************************************** * Name: stm32_spiinitialize * * Description: * Called to configure SPI chip select GPIO pins for the PX4FMU board. * ****************************************************************************************************/ extern void stm32_spiinitialize(void); /**************************************************************************************************** * Name: stm32_usbinitialize * * Description: * Called to configure USB IO. * ****************************************************************************************************/ extern void stm32_usbinitialize(void); extern void board_peripheral_reset(int ms); #include #endif /* __ASSEMBLY__ */ __END_DECLS