/****************************************************************************
 *
 *   Copyright (c) 2013-2015 PX4 Development Team. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name PX4 nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

#include "output_limit.h"

#include <math.h>
#include <stdbool.h>
#include <drivers/drv_hrt.h>
#include <stdio.h>

#define PROGRESS_INT_SCALING	10000

void output_limit_init(output_limit_t *limit)
{
	limit->state = OUTPUT_LIMIT_STATE_INIT;
	limit->time_armed = 0;
	limit->ramp_up = true;
}

void output_limit_calc(const bool armed, const bool pre_armed, const unsigned num_channels, const uint16_t reverse_mask,
		       const uint16_t *disarmed_output, const uint16_t *min_output, const uint16_t *max_output,
		       const float *output, uint16_t *effective_output, output_limit_t *limit)
{

	/* first evaluate state changes */
	switch (limit->state) {
	case OUTPUT_LIMIT_STATE_INIT:

		if (armed) {

			/* set arming time for the first call */
			if (limit->time_armed == 0) {
				limit->time_armed = hrt_absolute_time();
			}

			if (hrt_elapsed_time(&limit->time_armed) >= INIT_TIME_US) {
				limit->state = OUTPUT_LIMIT_STATE_OFF;
			}
		}

		break;

	case OUTPUT_LIMIT_STATE_OFF:
		if (armed) {
			if (limit->ramp_up) {
				limit->state = OUTPUT_LIMIT_STATE_RAMP;

			} else {
				limit->state = OUTPUT_LIMIT_STATE_ON;
			}

			/* reset arming time, used for ramp timing */
			limit->time_armed = hrt_absolute_time();
		}

		break;

	case OUTPUT_LIMIT_STATE_RAMP:
		if (!armed) {
			limit->state = OUTPUT_LIMIT_STATE_OFF;

		} else if (hrt_elapsed_time(&limit->time_armed) >= RAMP_TIME_US) {
			limit->state = OUTPUT_LIMIT_STATE_ON;
		}

		break;

	case OUTPUT_LIMIT_STATE_ON:
		if (!armed) {
			limit->state = OUTPUT_LIMIT_STATE_OFF;
		}

		break;

	default:
		break;
	}

	/* if the system is pre-armed, the limit state is temporarily on,
	 * as some outputs are valid and the non-valid outputs have been
	 * set to NaN. This is not stored in the state machine though,
	 * as the throttle channels need to go through the ramp at
	 * regular arming time.
	 */

	unsigned local_limit_state = limit->state;

	if (pre_armed) {
		local_limit_state = OUTPUT_LIMIT_STATE_ON;
	}

	unsigned progress;

	/* then set effective_output based on state */
	switch (local_limit_state) {
	case OUTPUT_LIMIT_STATE_OFF:
	case OUTPUT_LIMIT_STATE_INIT:
		for (unsigned i = 0; i < num_channels; i++) {
			effective_output[i] = disarmed_output[i];
		}

		break;

	case OUTPUT_LIMIT_STATE_RAMP: {
			hrt_abstime diff = hrt_elapsed_time(&limit->time_armed);

			progress = diff * PROGRESS_INT_SCALING / RAMP_TIME_US;

			if (progress > PROGRESS_INT_SCALING) {
				progress = PROGRESS_INT_SCALING;
			}

			for (unsigned i = 0; i < num_channels; i++) {

				float control_value = output[i];

				/* check for invalid / disabled channels */
				if (!PX4_ISFINITE(control_value)) {
					effective_output[i] = disarmed_output[i];
					continue;
				}

				uint16_t ramp_min_output;

				/* if a disarmed output value was set, blend between disarmed and min */
				if (disarmed_output[i] > 0) {

					/* safeguard against overflows */
					unsigned disarmed = disarmed_output[i];

					if (disarmed > min_output[i]) {
						disarmed = min_output[i];
					}

					unsigned disarmed_min_diff = min_output[i] - disarmed;
					ramp_min_output = disarmed + (disarmed_min_diff * progress) / PROGRESS_INT_SCALING;

				} else {

					/* no disarmed output value set, choose min output */
					ramp_min_output = min_output[i];
				}

				if (reverse_mask & (1 << i)) {
					control_value = -1.0f * control_value;
				}

				effective_output[i] = control_value * (max_output[i] - ramp_min_output) / 2 + (max_output[i] + ramp_min_output) / 2;

				/* last line of defense against invalid inputs */
				if (effective_output[i] < ramp_min_output) {
					effective_output[i] = ramp_min_output;

				} else if (effective_output[i] > max_output[i]) {
					effective_output[i] = max_output[i];
				}
			}
		}
		break;

	case OUTPUT_LIMIT_STATE_ON:

		for (unsigned i = 0; i < num_channels; i++) {
			effective_output[i] = output_limit_calc_single(reverse_mask & (1 << i), disarmed_output[i],
					      min_output[i], max_output[i], output[i]);
		}

		break;

	default:
		break;
	}

}