/****************************************************************************
 *
 *   Copyright (c) 2018 PX4 Development Team. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name PX4 nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/
/**
 * @file FlightTaskManual.cpp
 */

#include "FlightTaskManual.hpp"
#include <mathlib/mathlib.h>
#include <float.h>
#include <drivers/drv_hrt.h>

using namespace matrix;
using namespace time_literals;

bool FlightTaskManual::updateInitialize()
{
	bool ret = FlightTask::updateInitialize();

	_sub_manual_control_setpoint.update();

	const bool sticks_available = _evaluateSticks();

	if (_sticks_data_required) {
		ret = ret && sticks_available;
	}

	return ret;
}

bool FlightTaskManual::_evaluateSticks()
{
	hrt_abstime rc_timeout = (_param_com_rc_loss_t.get() * 1.5f) * 1_s;

	/* Sticks are rescaled linearly and exponentially to [-1,1] */
	if ((_time_stamp_current - _sub_manual_control_setpoint.get().timestamp) < rc_timeout) {

		/* Linear scale  */
		_sticks(0) = _sub_manual_control_setpoint.get().x; /* NED x, "pitch" [-1,1] */
		_sticks(1) = _sub_manual_control_setpoint.get().y; /* NED y, "roll" [-1,1] */
		_sticks(2) = -(_sub_manual_control_setpoint.get().z - 0.5f) * 2.f; /* NED z, "thrust" resacaled from [0,1] to [-1,1] */
		_sticks(3) = _sub_manual_control_setpoint.get().r; /* "yaw" [-1,1] */

		/* Exponential scale */
		_sticks_expo(0) = math::expo_deadzone(_sticks(0), _param_mpc_xy_man_expo.get(), _param_mpc_hold_dz.get());
		_sticks_expo(1) = math::expo_deadzone(_sticks(1), _param_mpc_xy_man_expo.get(), _param_mpc_hold_dz.get());
		_sticks_expo(2) = math::expo_deadzone(_sticks(2), _param_mpc_z_man_expo.get(), _param_mpc_hold_dz.get());
		_sticks_expo(3) = math::expo_deadzone(_sticks(3), _param_mpc_yaw_expo.get(), _param_mpc_hold_dz.get());

		// Only switch the landing gear up if the user switched from gear down to gear up.
		// If the user had the switch in the gear up position and took off ignore it
		// until he toggles the switch to avoid retracting the gear immediately on takeoff.
		int8_t gear_switch = _sub_manual_control_setpoint.get().gear_switch;

		if (_gear_switch_old != gear_switch) {
			_applyGearSwitch(gear_switch);
		}

		_gear_switch_old = gear_switch;

		// valid stick inputs are required
		const bool valid_sticks =  PX4_ISFINITE(_sticks(0))
					   && PX4_ISFINITE(_sticks(1))
					   && PX4_ISFINITE(_sticks(2))
					   && PX4_ISFINITE(_sticks(3));

		return valid_sticks;

	} else {
		/* Timeout: set all sticks to zero */
		_sticks.zero();
		_sticks_expo.zero();
		_gear.landing_gear = landing_gear_s::GEAR_KEEP;
		return false;
	}
}

void FlightTaskManual::_applyGearSwitch(uint8_t gswitch)
{
	if (gswitch == manual_control_setpoint_s::SWITCH_POS_OFF) {
		_gear.landing_gear = landing_gear_s::GEAR_DOWN;
	}

	if (gswitch == manual_control_setpoint_s::SWITCH_POS_ON) {
		_gear.landing_gear = landing_gear_s::GEAR_UP;
	}
}