# mRo Pixhawk 비행 컨트롤러 (Pixhawk 1)

:::warning
PX4 does not manufacture this (or any) autopilot.
Contact the [manufacturer](https://store.mrobotics.io/) for hardware support or compliance issues.
:::

The _mRo Pixhawk<sup>&reg;</sup>_ is a hardware compatible version of the original [Pixhawk 1](../flight_controller/pixhawk.md). It runs PX4 on the [NuttX](https://nuttx.apache.org/) OS.

:::tip
The controller can be used as a drop-in replacement for the 3DR<sup>&reg;</sup> [Pixhawk 1](../flight_controller/pixhawk.md).
The main difference is that it is based on the [Pixhawk-project](https://pixhawk.org/) **FMUv3** open hardware design, which corrects a bug that limited the original Pixhawk 1 to 1MB of flash.
:::

![mRo Pixhawk Image](../../assets/flight_controller/mro/mro_pixhawk.jpg)

Assembly/setup instructions for use with PX4 are provided here: [Pixhawk Wiring Quickstart](../assembly/quick_start_pixhawk.md)

:::tip
This autopilot is [supported](../flight_controller/autopilot_pixhawk_standard.md) by the PX4 maintenance and test teams.
:::

## 주요 특징

- 마이크로 프로세서:
  - FPU가있는 32 비트 STM32F427 코어 텍스<sup>&reg;</sup> M4 코어
  - 168 MHz / 256 KB RAM / 2 MB 플래시
  - 32 비트 STM32F100 failsafe 코프로세서
  - 24 MHz/8 KB RAM/64 KB 플래시

- 센서:
  - ST Micro L3GD20 3축 16비트 자이로스코프
  - ST Micro LSM303D 3축 14비트 가속도계/자력계
  - Invensense<sup>&reg;</sup> MPU 6000 3축 가속도계/자이로스코프
  - MEAS MS5611 기압계

- 인터페이스:
  - UART (직렬 포트) 5개, 1 개의 고전력 지원, 2x (HW 흐름 제어 포함)
  - CAN 2 개
  - 최대 DX8의 Spektrum DSM/DSM2/DSM-X® Satellite 호환 입력(DX9 이상은 지원되지 않음)
  - Futaba<sup>&reg;</sup> S.BUS 호환 입력 및 출력
  - PPM 합계 신호
  - RSSI(PWM 또는 전압) 입력
  - I2C
  - SPI
  - 3.3 및 6.6V ADC 입력
  - 외부 microUSB 포트

- 전원시스템
  - 자동 복구 기능의 이상적인 다이오드 컨트롤러
  - 서보 레일 고전력 (7V) 및 고전류 준비
  - 모든 주변 장치 출력 과전류 보호, 모든 입력 ESD 보호

- 중량과 크기
  - 무게 : 38g (1.31oz)
  - 너비 : 50mm (1.96 ")
  - 두께 : 15.5mm (.613 ")
  - 길이 : 81.5mm (3.21")

## 구매처

- [Bare Bones](https://store.mrobotics.io/Genuine-PixHawk-1-Barebones-p/mro-pixhawk1-bb-mr.htm) - Just the board (useful as a 3DR Pixhawk replacement)
- [mRo Pixhawk 2.4.6 Essential Kit!](https://store.mrobotics.io/Genuine-PixHawk-Flight-Controller-p/mro-pixhawk1-minkit-mr.htm) - Everything except for telemetry radios
- [mRo Pixhawk 2.4.6 Cool Kit! (Limited edition)](https://store.mrobotics.io/product-p/mro-pixhawk1-fullkit-mr.htm) - Everything you need including telemetry radios

## 펌웨어 빌드

:::tip
Most users will not need to build this firmware!
It is pre-built and automatically installed by _QGroundControl_ when appropriate hardware is connected.
:::

To [build PX4](../dev_setup/building_px4.md) for this target:

```
make px4_fmu-v3_default
```

## 디버그 포트

See [3DR Pixhawk 1 > Debug Ports](../flight_controller/pixhawk.md#debug-ports)

## 핀배열

See [3DR Pixhawk 1 > Pinouts](../flight_controller/pixhawk.md#pinouts)

## 시리얼 포트 매핑

| UART   | 장치         | 포트                                |
| ------ | ---------- | --------------------------------- |
| UART1  | /dev/ttyS0 | IO 디버그                            |
| USART2 | /dev/ttyS1 | TELEM1 (흐름 제어) |
| USART3 | /dev/ttyS2 | TELEM2 (흐름 제어) |
| UART4  |            |                                   |
| UART7  | 콘솔         |                                   |
| UART8  | SERIAL4    |                                   |

<!-- Note: Got ports using https://github.com/PX4/PX4-user_guide/pull/672#issuecomment-598198434 -->

## 회로도

The board is based on the [Pixhawk-project](https://pixhawk.org/) **FMUv3** open hardware design.

- [FMUv3 schematic](https://github.com/pixhawk/Hardware/raw/master/FMUv3_REV_D/Schematic%20Print/Schematic%20Prints.PDF) -- Schematic and layout

:::info
As a CC-BY-SA 3.0 licensed Open Hardware design, all schematics and design files are [available](https://github.com/pixhawk/Hardware).
:::