# Посібник з портування NuttX

Для портування PX4 на NuttX на новий апаратний пристрій, цей апаратний пристрій повинен бути підтриманий NuttX.
The NuttX project maintains an excellent [porting guide](https://cwiki.apache.org/confluence/display/NUTTX/Porting+Guide) for porting NuttX to a new computing platform.

The following guide assumes you are using an already supported hardware target or have ported NuttX (including the [PX4 base layer](https://github.com/PX4/PX4-Autopilot/tree/main/platforms/nuttx/src/px4)) already.

The configuration files for all boards, including linker scripts and other required settings, are located under [/boards](https://github.com/PX4/PX4-Autopilot/tree/main/boards/) in a vendor- and board-specific directory (i.e. **boards/_VENDOR_/_MODEL_/**).

The following example uses FMUv5 as it is a recent [reference configuration](../hardware/reference_design.md) for NuttX based flight controllers:

- Running `make px4_fmu-v5_default` from the **PX4-Autopilot** directory will build the FMUv5 config
- The base FMUv5 configuration files are located in: [/boards/px4/fmu-v5](https://github.com/PX4/PX4-Autopilot/tree/main/boards/px4/fmu-v5).
  - Board specific header (NuttX pins and clock configuration): [/boards/px4/fmu-v5/nuttx-config/include/board.h](https://github.com/PX4/PX4-Autopilot/blob/main/boards/px4/fmu-v5/nuttx-config/include/board.h).
  - Board specific header (PX4 configuration): [/boards/px4/fmu-v5/src/board_config.h](https://github.com/PX4/PX4-Autopilot/blob/main/boards/px4/fmu-v5/src/board_config.h).
  - NuttX OS config (created with NuttX menuconfig): [/boards/px4/fmu-v5/nuttx-config/nsh/defconfig](https://github.com/PX4/PX4-Autopilot/blob/main/boards/px4/fmu-v5/nuttx-config/nsh/defconfig).
  - Build configuration: [boards/px4/fmu-v5/default.px4board](https://github.com/PX4/PX4-Autopilot/blob/main/boards/px4/fmu-v5/default.px4board).

## Налаштування меню NuttX Menuconfig

To modify the NuttX OS configuration, you can use [menuconfig](https://bitbucket.org/patacongo/nuttx/src/master/) using the PX4 shortcuts:

```sh
make px4_fmu-v5_default menuconfig
make px4_fmu-v5_default qconfig
```

For fresh installs of PX4 onto Ubuntu using [ubuntu.sh](https://github.com/PX4/PX4-Autopilot/blob/main/Tools/setup/ubuntu.sh) <!-- NEED px4_version --> you will also need to install _kconfig_ tools from [NuttX tools](https://bitbucket.org/nuttx/tools/src/master/).

:::info
The following steps are not required if using the [px4-dev-nuttx](https://hub.docker.com/r/px4io/px4-dev-nuttx/) docker container or have installed to macOS using our normal instructions (as these include`kconfig-mconf`).
:::

Виконайте наступні команди з будь-якого каталогу:

```sh
git clone https://bitbucket.org/nuttx/tools.git
cd tools/kconfig-frontends
sudo apt install gperf
./configure --enable-mconf --disable-nconf --disable-gconf --enable-qconf --prefix=/usr
make
sudo make install
```

The `--prefix=/usr` determines the specific installation location (which must be in the `PATH` environment variable).
The `--enable-mconf` and `--enable-qconf` options will enable the `menuconfig` and `qconfig` options respectively.

To run `qconfig` you may need to install additional Qt dependencies.

### Завантажувач

Спочатку вам знадобиться завантажувач, який залежить від цільового обладнання:

- STM32H7: завантажувач базується на NuttX та включений в прошивку PX4.
  See [here](https://github.com/PX4/PX4-Autopilot/tree/main/boards/holybro/durandal-v1/nuttx-config/bootloader) for an example.
- For all other targets, https://github.com/PX4/PX4-Bootloader is used. See [here](https://github.com/PX4/PX4-Bootloader/pull/155/files) for an example how to add a new target.
  Then checkout the [building and flashing instructions](../software_update/stm32_bootloader.md).

### Кроки портування прошивки

1. Make sure you have a working [development setup](../dev_setup/dev_env.md) and installed the NuttX \`menuconfig\`\` tool (see above).

2. Завантажте вихідний код і переконайтеся, що ви можете зібрати існуючу ціль:

   ```sh
   git clone --recursive https://github.com/PX4/PX4-Autopilot.git
   cd PX4-Autopilot
   make px4_fmu-v5
   ```

3. Знаходьте існуючу ціль, яка використовує той самий (або тісно пов'язаний) тип ЦП, і скопіюйте її.
   Наприклад для STM32F7:

   ```sh
   mkdir boards/manufacturer
   cp -r boards/px4/fmu-v5 boards/manufacturer/my-target-v1
   ```

   Change **manufacturer** to the manufacturer name and **my-target-v1** to your board name.

Next you need to go through all files under **boards/manufacturer/my-target-v1** and update them according to your board.

1. **firmware.prototype**: update the board ID and name
2. **default.px4board**: update the **VENDOR** and **MODEL** to match the directory names (**my-target-v1**).
   Налаштування послідовних портів.
3. Configure NuttX (**defconfig**) via `make manufacturer_my-target-v1 menuconfig`: Adjust the CPU and chip, configure the peripherals (UART's, SPI, I2C, ADC).
4. **nuttx-config/include/board.h**: Configure the NuttX pins.
   Для всіх зовнішніх пристроїв з кількома варіантами контактів, NuttX повинен знати контакт.
   They are defined in the chip-specific pinmap header file, for example [stm32f74xx75xx_pinmap.h](https://github.com/PX4/NuttX/blob/px4_firmware_nuttx-8.2/arch/arm/src/stm32f7/hardware/stm32f74xx75xx_pinmap.h).
5. **src**: go through all files under **src** and update them as needed, in particular **board_config.h**.
6. **init/rc.board_sensors**: start the sensors that are attached to the board.