fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-19 11:03:35 +08:00
Code Issues Packages Projects Releases Wiki Activity

Merged master into lockdown_disable

Browse Source
This commit is contained in:
Lorenz Meier
2014-01-30 10:00:01 +01:00
parent 62076c0e81 3b31a6b1b9
commit ff753b9e24
98 changed files with 2764 additions and 2745 deletions
Download Patch File Download Diff File Expand all files Collapse all files
src/modules/px4iofirmware/protocol.h
+15 -4
View File
@@ -111,7 +111,6 @@
#define PX4IO_P_STATUS_FLAGS_INIT_OK (1 << 10) /* initialisation of the IO completed without error */
#define PX4IO_P_STATUS_FLAGS_FAILSAFE (1 << 11) /* failsafe is active */
#define PX4IO_P_STATUS_FLAGS_SAFETY_OFF (1 << 12) /* safety is off */
#define PX4IO_P_STATUS_FLAGS_RC_DSM11 (1 << 13) /* DSM input is 11 bit data */
#define PX4IO_P_STATUS_ALARMS 3 /* alarm flags - alarms latch, write 1 to a bit to clear it */
#define PX4IO_P_STATUS_ALARMS_VBATT_LOW (1 << 0) /* [1] VBatt is very close to regulator dropout */
@@ -128,8 +127,6 @@
#define PX4IO_P_STATUS_VSERVO 6 /* [2] servo rail voltage in mV */
#define PX4IO_P_STATUS_VRSSI 7 /* [2] RSSI voltage */
#define PX4IO_P_STATUS_PRSSI 8 /* [2] RSSI PWM value */
#define PX4IO_P_STATUS_NRSSI 9 /* [2] Normalized RSSI value, 0: no reception, 255: perfect reception */
#define PX4IO_P_STATUS_RC_DATA 10 /* [1] + [2] Details about the RC source (PPM frame length, Spektrum protocol type) */
/* array of post-mix actuator outputs, -10000..10000 */
#define PX4IO_PAGE_ACTUATORS 2 /* 0..CONFIG_ACTUATOR_COUNT-1 */
@@ -140,7 +137,17 @@
/* array of raw RC input values, microseconds */
#define PX4IO_PAGE_RAW_RC_INPUT 4
#define PX4IO_P_RAW_RC_COUNT 0 /* number of valid channels */
#define PX4IO_P_RAW_RC_BASE 1 /* CONFIG_RC_INPUT_COUNT channels from here */
#define PX4IO_P_RAW_RC_FLAGS 1 /* RC detail status flags */
#define PX4IO_P_RAW_RC_FLAGS_FRAME_DROP (1 << 0) /* single frame drop */
#define PX4IO_P_RAW_RC_FLAGS_FAILSAFE (1 << 1) /* receiver is in failsafe mode */
#define PX4IO_P_RAW_RC_FLAGS_RC_DSM11 (1 << 2) /* DSM decoding is 11 bit mode */
#define PX4IO_P_RAW_RC_FLAGS_MAPPING_OK (1 << 3) /* Channel mapping is ok */
#define PX4IO_P_RAW_RC_NRSSI 2 /* [2] Normalized RSSI value, 0: no reception, 255: perfect reception */
#define PX4IO_P_RAW_RC_DATA 3 /* [1] + [2] Details about the RC source (PPM frame length, Spektrum protocol type) */
#define PX4IO_P_RAW_FRAME_COUNT 4 /* Number of total received frames (wrapping counter) */
#define PX4IO_P_RAW_LOST_FRAME_COUNT 5 /* Number of total dropped frames (wrapping counter) */
#define PX4IO_P_RAW_RC_BASE 6 /* CONFIG_RC_INPUT_COUNT channels from here */
/* array of scaled RC input values, -10000..10000 */
#define PX4IO_PAGE_RC_INPUT 5
@@ -157,6 +164,10 @@
/* setup page */
#define PX4IO_PAGE_SETUP 50
#define PX4IO_P_SETUP_FEATURES 0
#define PX4IO_P_SETUP_FEATURES_SBUS1_OUT (1 << 0) /* enable S.Bus v1 output */
#define PX4IO_P_SETUP_FEATURES_SBUS2_OUT (1 << 1) /* enable S.Bus v2 output */
#define PX4IO_P_SETUP_FEATURES_PWM_RSSI (1 << 2) /* enable PWM RSSI parsing */
#define PX4IO_P_SETUP_FEATURES_ADC_RSSI (1 << 3) /* enable ADC RSSI parsing */
#define PX4IO_P_SETUP_ARMING 1 /* arming controls */
#define PX4IO_P_SETUP_ARMING_IO_ARM_OK (1 << 0) /* OK to arm the IO side */