fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-21 02:33:34 +08:00
Code Issues Packages Projects Releases Wiki Activity

New Crowdin translations - ko

Browse Source
This commit is contained in:
Crowdin Bot
2025-07-23 09:58:57 +10:00
committed by Hamish Willee
parent fea845082f
commit f413b0c4d2
62 changed files with 206 additions and 217 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/ko/assembly/quick_start_cuav_v5_nano.md
+1 -3
View File
@@ -113,9 +113,7 @@ The vehicle-based radio should be connected to the **TELEM1** or **TELEM2** port
![quickstart](../../assets/flight_controller/cuav_v5_nano/connection/v5_nano_quickstart_07.png)
<a id="sd_card"></a>
## SD 카드(선택 사항)
## SD Card (Optional) {#sd_card}
An [SD card](../getting_started/px4_basic_concepts.md#sd-cards-removable-memory) is inserted in the factory (you do not need to do anything).
docs/ko/assembly/quick_start_cuav_v5_plus.md
+1 -3
View File
@@ -114,9 +114,7 @@ The vehicle-based radio should be connected to either the `TELEM1` or `TELEM2` p
![V5+ AutoPilot](../../assets/flight_controller/cuav_v5_plus/connection/v5+_quickstart_06.png)
<a id="sd_card"></a>
## SD 카드(선택 사항)
## SD Card (Optional) {#sd_card}
An [SD card](../getting_started/px4_basic_concepts.md#sd-cards-removable-memory) is inserted in the factory (you do not need to do anything).
docs/ko/assembly/quick_start_pixhawk4.md
+2 -4
View File
@@ -148,9 +148,7 @@ The vehicle-based radio should be connected to the **TELEM1** port as shown belo
![Pixhawk 4/Telemetry Radio](../../assets/flight_controller/pixhawk4/pixhawk4_telemetry_radio.jpg)
<a id="sd_card"></a>
## SD 카드(선택 사항)
## SD Card (Optional) {#sd_card}
SD cards are highly recommended as they are needed to [log and analyse flight details](../getting_started/flight_reporting.md), to run missions, and to use UAVCAN-bus hardware.
Insert the card (included in Pixhawk 4 kit) into _Pixhawk 4_ as shown below.
@@ -194,4 +192,4 @@ QuadPlane specific configuration is covered here: [QuadPlane VTOL Configuration]
- [Pixhawk 4](../flight_controller/pixhawk4.md) (Overview page)
- [Pixhawk 4 Technical Data Sheet](https://github.com/PX4/PX4-Autopilot/blob/main/docs/assets/flight_controller/pixhawk4/pixhawk4_technical_data_sheet.pdf)
- [Pixhawk 4 Pinouts](https://cdn.shopify.com/s/files/1/0604/5905/7341/files/Pixhawk4-Pinouts.pdf) (Holybro)
- [Pixhawk 4 Quick Start Guide (Holybro)](https://holybro.com/manual/Pixhawk4-quickstartguide.pdf)
- [Pixhawk 4 Quick Start Guide (Holybro)](https://cdn.shopify.com/s/files/1/0604/5905/7341/files/Pixhawk4-quickstartguide.pdf)
docs/ko/assembly/quick_start_pixhawk5x.md
+1 -1
View File
@@ -53,7 +53,7 @@ The GPS module's integrated safety switch is enabled _by default_ (when enabled,
## 전원
Connect the output of the _PM02D Power Module_ (PM board) that comes with the Standard Set to one of the **POWER** port of _Pixhawk 5X_ using the 6-wire cable.
The PM02D and Power ports on the Pixhawk 5X uses the 6 circuit [2.00mm Pitch CLIK-Mate Wire-to-Board PCB Receptacle](https://www.molex.com/molex/products/part-detail/pcb_receptacles/5024430670) & [Housing](https://www.molex.com/molex/products/part-detail/crimp_housings/5024390600).
The PM02D and Power ports on the Pixhawk 5X uses the 6 circuit [2.00mm Pitch CLIK-Mate Wire-to-Board PCB Receptacle](https://www.molex.com/en-us/products/part-detail/5024430670) & [Housing](https://www.molex.com/molex/products/part-detail/crimp_housings/5024390600).
The PM02D Power Module supports **2~6S** battery, the board input should be connected to your LiPo battery. Note that the PM board does not supply power to the + and - pins of **FMU PWM OUT** and **I/O PWM OUT**.
docs/ko/assembly/quick_start_pixhawk6x.md
+1 -1
View File
@@ -66,7 +66,7 @@ The GPS module's integrated safety switch is enabled _by default_ (when enabled,
## 전원
Connect the output of the _PM02D Power Module_ (PM board) that comes with the Standard Set to one of the **POWER** port of _Pixhawk 6X_ using the 6-wire cable.
The PM02D and Power ports on the Pixhawk 6X uses the 6 circuit [2.00mm Pitch CLIK-Mate Wire-to-Board PCB Receptacle](https://www.molex.com/molex/products/part-detail/pcb_receptacles/5024430670) & [Housing](https://www.molex.com/molex/products/part-detail/crimp_housings/5024390600).
The PM02D and Power ports on the Pixhawk 6X uses the 6 circuit [2.00mm Pitch CLIK-Mate Wire-to-Board PCB Receptacle](https://www.molex.com/en-us/products/part-detail/5024430670) & [Housing](https://www.molex.com/molex/products/part-detail/crimp_housings/5024390600).
The PM02D Power Module supports **2~6S** battery, the board input should be connected to your LiPo battery. Note that the PM board does not supply power to the + and - pins of **FMU PWM OUT** and **I/O PWM OUT**.