fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-18 05:53:34 +08:00
Code Issues Packages Projects Releases Wiki Activity

new manual_control_switches msg (split out of manual_control_setpoint) (#16270)

Browse Source 
- split out switches from manual_control_setpoint into new message manual_control_switches
 - manual_control_switches published at minimal rate (~ 1 Hz) or immediately on change
 - simple switch debounce in rc_update (2 consecutive identical decodes required)
 - manual_control_switches logged at full rate rather than sampled at (5-10% of messages logged)
 - manual_control_setpoint publish at minimal rate unless changing
 - commander handle landing gear switch for manual modes
 - processing of mode_slot and mode_switch is now split so we only do one or the other (not both)
     - a future step will be to finally drop mode_switch and accompanying switches entirely

Co-authored-by: Matthias Grob <maetugr@gmail.com>
This commit is contained in:
Daniel Agar
2020-12-11 12:11:35 -05:00
committed by GitHub
co-authored by Matthias Grob
parent 25ef76b3b8
commit ef6209ba03
25 changed files with 670 additions and 587 deletions
Download Patch File Download Diff File Expand all files Collapse all files
msg/manual_control_setpoint.msg
+9 -27
View File
@@ -1,23 +1,15 @@
uint64 timestamp # time since system start (microseconds)
uint8 SWITCH_POS_NONE = 0 # switch is not mapped
uint8 SWITCH_POS_ON = 1 # switch activated (value = 1)
uint8 SWITCH_POS_MIDDLE = 2 # middle position (value = 0)
uint8 SWITCH_POS_OFF = 3 # switch not activated (value = -1)
uint8 MODE_SLOT_NONE = 0 # no mode slot assigned
uint8 MODE_SLOT_1 = 1 # mode slot 1 selected
uint8 MODE_SLOT_2 = 2 # mode slot 2 selected
uint8 MODE_SLOT_3 = 3 # mode slot 3 selected
uint8 MODE_SLOT_4 = 4 # mode slot 4 selected
uint8 MODE_SLOT_5 = 5 # mode slot 5 selected
uint8 MODE_SLOT_6 = 6 # mode slot 6 selected
uint8 MODE_SLOT_NUM = 6 # number of slots
uint64 timestamp_sample # the timestamp of the raw data (microseconds)
uint8 SOURCE_RC = 1 # radio control
uint8 SOURCE_MAVLINK_0 = 2 # mavlink instance 0
uint8 SOURCE_MAVLINK_1 = 3 # mavlink instance 1
uint8 SOURCE_MAVLINK_2 = 4 # mavlink instance 2
uint8 SOURCE_MAVLINK_3 = 5 # mavlink instance 4
uint8 data_source # where this input is coming from
# Any of the channels may not be available and be set to NaN
# to indicate that it does not contain valid data.
# The variable names follow the definition of the
@@ -30,19 +22,24 @@ float32 x # stick position in x direction -1..1
# in general corresponds to forward/back motion or pitch of vehicle,
# in general a positive value means forward or negative pitch and
# a negative value means backward or positive pitch
float32 y # stick position in y direction -1..1
# in general corresponds to right/left motion or roll of vehicle,
# in general a positive value means right or positive roll and
# a negative value means left or negative roll
float32 z # throttle stick position 0..1
# in general corresponds to up/down motion or thrust of vehicle,
# in general the value corresponds to the demanded throttle by the user,
# if the input is used for setting the setpoint of a vertical position
# controller any value > 0.5 means up and any value < 0.5 means down
float32 r # yaw stick/twist position, -1..1
# in general corresponds to the righthand rotation around the vertical
# (downwards) axis of the vehicle
float32 flaps # flap position
float32 aux1 # default function: camera yaw / azimuth
float32 aux2 # default function: camera pitch / tilt
float32 aux3 # default function: camera trigger
@@ -50,18 +47,3 @@ float32 aux4 # default function: camera roll
float32 aux5 # default function: payload drop
float32 aux6
uint8 mode_switch # main mode 3 position switch (mandatory): _MANUAL_, ASSIST, AUTO
uint8 return_switch # return to launch 2 position switch (mandatory): _NORMAL_, RTL
uint8 rattitude_switch # rattitude control 2 position switch (optional): _MANUAL, RATTITUDE
uint8 posctl_switch # position control 2 position switch (optional): _ALTCTL_, POSCTL
uint8 loiter_switch # loiter 2 position switch (optional): _MISSION_, LOITER
uint8 acro_switch # acro 2 position switch (optional): _MANUAL_, ACRO
uint8 offboard_switch # offboard 2 position switch (optional): _NORMAL_, OFFBOARD
uint8 kill_switch # throttle kill: _NORMAL_, KILL
uint8 arm_switch # arm/disarm switch: _DISARMED_, ARMED
uint8 transition_switch # VTOL transition switch: _HOVER, FORWARD_FLIGHT
uint8 gear_switch # landing gear switch: _DOWN_, UP
uint8 mode_slot # the slot a specific model selector is in
uint8 data_source # where this input is coming from
uint8 stab_switch # stabilize switch (only relevant for fixed wings, optional): _MANUAL, STABILIZED
uint8 man_switch # manual switch (only relevant for fixed wings, optional): _STABILIZED_, MANUAL