fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-29 13:03:35 +08:00
Code Issues Packages Projects Releases Wiki Activity

remove BOARD_NAME from board_config.h and set automatically

Browse Source
This commit is contained in:
Daniel Agar
2018-11-26 14:40:14 -08:00
committed by David Sidrane
parent 2d052c02fa
commit ec4c9da253
34 changed files with 32 additions and 63 deletions
Download Patch File Download Diff File Expand all files Collapse all files
boards/aerotenna/ocpoc/src/board_config.h
-1
View File
@@ -42,7 +42,6 @@
#define BOARD_OVERRIDE_UUID "OCPOC00000000000" // must be of length 16
#define PX4_SOC_ARCH_ID PX4_SOC_ARCH_ID_OCPOC
#define BOARD_NAME "AEROTENNA_OCPOC"
#define BOARD_BATTERY1_V_DIV (10.177939394f)
#define BOARD_HAS_NO_RESET
#define BOARD_HAS_NO_BOOTLOADER
boards/airmind/mindpx-v2/src/board_config.h
-2
View File
@@ -293,8 +293,6 @@
#define SPEKTRUM_RX_AS_UART() px4_arch_configgpio(GPIO_USART1_RX)
#define SPEKTRUM_OUT(_one_true) px4_arch_gpiowrite(GPIO_PPM_IN_AS_OUT, (_one_true))
#define BOARD_NAME "AIRMIND_MINDPX_V2"
/* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction)
* this board support the ADC system_power interface, and therefore
* provides the true logic GPIO BOARD_ADC_xxxx macros.
boards/atlflight/eagle/src/board_config.h
-2
View File
@@ -42,8 +42,6 @@
#define BOARD_OVERRIDE_UUID "EAGLEID000000000" // must be of length 16
#define PX4_SOC_ARCH_ID PX4_SOC_ARCH_ID_EAGLE
#define BOARD_NAME "ATLFLIGHT_EAGLE"
#define BOARD_HAS_NO_RESET
#define BOARD_HAS_NO_BOOTLOADER
boards/atlflight/excelsior/src/board_config.h
+3 -1
View File
@@ -38,8 +38,10 @@
*/
#pragma once
#define BOARD_NAME "ATLFLIGHT_EXCELSIOR"
#define BOARD_BATTERY1_V_DIV (10.177939394f)
#define BOARD_BATTERY1_A_PER_V (15.391030303f)
#define BOARD_HAS_NO_RESET
#define BOARD_HAS_NO_BOOTLOADER
boards/atmel/same70xplained/src/board_config.h
-2
View File
@@ -300,8 +300,6 @@ __BEGIN_DECLS
#define GPIO_PWM_IN GPIO_TIM4_CH2IN_2
#endif
#define BOARD_NAME "ATMEL_SAME70XPLAINED"
/*
* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction)
* this board support the ADC system_power interface, and therefore
boards/auav/esc35-v1/src/board_config.h
-2
View File
@@ -134,8 +134,6 @@
GPIO_PORTA | GPIO_PIN1 | GPIO_OUTPUT_CLEAR)
#define GPIO_LED_BLUE GPIO_LED3
#define BOARD_NAME "AUAV_ESC35_V1"
__BEGIN_DECLS
/************************************************************************************
boards/auav/x21/src/board_config.h
-2
View File
@@ -203,8 +203,6 @@
#define PWMIN_TIMER_CHANNEL 2
#define GPIO_PWM_IN GPIO_TIM4_CH2IN_2
#define BOARD_NAME "AUAV_X21"
/* By Providing BOARD_ADC_USB_CONNECTED this board support the ADC
* system_power interface, and therefore provides the true logic
* GPIO BOARD_ADC_xxxx macros.
boards/av/x-v1/src/board_config.h
-2
View File
@@ -337,8 +337,6 @@
# warning SDIO initialization cannot be perfomed on the IDLE thread
#endif
#define BOARD_NAME "AV_X_V1"
/* AV-X_V1 never powers off the Servo rail */
#define BOARD_ADC_SERVO_VALID (1)
boards/beaglebone/blue/src/board_config.h
-2
View File
@@ -45,8 +45,6 @@
#define BOARD_OVERRIDE_UUID "BBBLUEID00000000" // must be of length 16
#define PX4_SOC_ARCH_ID PX4_SOC_ARCH_ID_BBBLUE
#define BOARD_NAME "BEAGLEBONE_BLUE"
#define BOARD_BATTERY1_V_DIV (11.0f)
//#define BOARD_BATTERY1_A_PER_V (15.391030303f)
boards/bitcraze/crazyflie/src/board_config.h
-2
View File
@@ -215,8 +215,6 @@
#define HRT_TIMER 8 /* use timer8 for the HRT */
#define HRT_TIMER_CHANNEL 1 /* use capture/compare channel */
#define BOARD_NAME "BITCRAZE_CRAZYFLIE"
#define BOARD_HAS_PWM DIRECT_PWM_OUTPUT_CHANNELS
__BEGIN_DECLS
boards/emlid/navio2/src/board_config.h
-2
View File
@@ -42,8 +42,6 @@
#define BOARD_OVERRIDE_UUID "RPIID00000000000" // must be of length 16
#define PX4_SOC_ARCH_ID PX4_SOC_ARCH_ID_RPI
#define BOARD_NAME "EMLID_NAVIO2"
#define ADC_BATTERY_VOLTAGE_CHANNEL 2
#define ADC_BATTERY_CURRENT_CHANNEL 3
boards/gumstix/aerocore2/src/board_config.h
-2
View File
@@ -200,8 +200,6 @@
#define HRT_TIMER 8 /* use timer8 for the HRT */
#define HRT_TIMER_CHANNEL 1 /* use capture/compare channel */
#define BOARD_NAME "GUMSTIX_AEROCORE2"
#define BOARD_HAS_PWM DIRECT_PWM_OUTPUT_CHANNELS
#define BOARD_FMU_GPIO_TAB { \
boards/intel/aerofc-v1/src/board_config.h
-2
View File
@@ -129,8 +129,6 @@
#define HRT_TIMER 3 /* use timer3 for the HRT */
#define HRT_TIMER_CHANNEL 4 /* use capture/compare channel */
#define BOARD_NAME "INTEL_AEROFC_V1"
#define FLASH_BASED_PARAMS
#define FLASH_BASED_DATAMAN
boards/nxp/hlite-v3/src/board_config.h
-3
View File
@@ -391,9 +391,6 @@ __BEGIN_DECLS
#define PWMIN_TIMER_CHANNEL 2
#define GPIO_PWM_IN GPIO_FTM0_CH2IN
#define BOARD_NAME "NXP_HLITE_V3"
/* Define True logic Power Control in arch agnostic form */
#define VDD_ETH_EN(on_true) px4_arch_gpiowrite(nGPIO_ETHERNET_P_EN, !(on_true))
boards/omnibus/f4sd/src/board_config.h
-2
View File
@@ -252,8 +252,6 @@
//#define SPEKTRUM_RX_AS_UART() px4_arch_configgpio(GPIO_USART1_RX)
//#define SPEKTRUM_OUT(_one_true) px4_arch_gpiowrite(GPIO_PPM_IN_AS_OUT, (_one_true))
#define BOARD_NAME "OMNIBUS_F4SD"
#define BOARD_HAS_PWM DIRECT_PWM_OUTPUT_CHANNELS
#define BOARD_FMU_GPIO_TAB { \
boards/parrot/bebop/src/board_config.h
-2
View File
@@ -42,8 +42,6 @@
#define BOARD_OVERRIDE_UUID "BEBOPID000000000" // must be of length 16
#define PX4_SOC_ARCH_ID PX4_SOC_ARCH_ID_BEBOP
#define BOARD_NAME "PARROT_BEBOP"
#define BOARD_HAS_NO_RESET
#define BOARD_HAS_NO_BOOTLOADER
boards/px4/cannode-v1/src/board_config.h
-2
View File
@@ -143,8 +143,6 @@
#define GPIO_CAN_CTRL (GPIO_OUTPUT | GPIO_CNF_OUTPP | GPIO_MODE_50MHz | \
GPIO_PORTC | GPIO_PIN13 | GPIO_OUTPUT_CLEAR)
#define BOARD_NAME "PX4_CANNODE_V1"
__BEGIN_DECLS
/************************************************************************************
boards/px4/esc-v1/src/board_config.h
-2
View File
@@ -216,8 +216,6 @@
#define GPIO_TEST1 (GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_50MHz | \
GPIO_PORTD | GPIO_PIN2 | GPIO_OUTPUT_CLEAR)
#define BOARD_NAME "PX4_ESC_V1"
__BEGIN_DECLS
/************************************************************************************
boards/px4/fmu-v2/src/board_config.h
-2
View File
@@ -450,8 +450,6 @@
#define PWMIN_TIMER_CHANNEL 2
#define GPIO_PWM_IN GPIO_TIM4_CH2IN_2
#define BOARD_NAME "PX4_FMU_V2"
/* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction)
* this board support the ADC system_power interface, and therefore
* provides the true logic GPIO BOARD_ADC_xxxx macros.
boards/px4/fmu-v3/src/board_config.h
-2
View File
@@ -450,8 +450,6 @@
#define PWMIN_TIMER_CHANNEL 2
#define GPIO_PWM_IN GPIO_TIM4_CH2IN_2
#define BOARD_NAME "PX4_FMU_V2"
/* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction)
* this board support the ADC system_power interface, and therefore
* provides the true logic GPIO BOARD_ADC_xxxx macros.
boards/px4/fmu-v4/src/board_config.h
-2
View File
@@ -306,8 +306,6 @@
#define SPEKTRUM_RX_AS_UART() /* Can be left as uart */
#define SPEKTRUM_OUT(_one_true) px4_arch_gpiowrite(GPIO_PPM_IN_AS_OUT, (_one_true))
#define BOARD_NAME "PX4_FMU_V4"
/**
* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction)
* this board support the ADC system_power interface, and therefore
boards/px4/fmu-v5/src/board_config.h
-2
View File
@@ -602,8 +602,6 @@
# warning SDIO initialization cannot be perfomed on the IDLE thread
#endif
#define BOARD_NAME "PX4_FMU_V5"
/* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction)
* this board support the ADC system_power interface, and therefore
* provides the true logic GPIO BOARD_ADC_xxxx macros.
boards/px4/raspberrypi/src/board_config.h
-2
View File
@@ -42,8 +42,6 @@
#define BOARD_OVERRIDE_UUID "RPIID00000000000" // must be of length 16
#define PX4_SOC_ARCH_ID PX4_SOC_ARCH_ID_RPI
#define BOARD_NAME "RASPBERRYPI"
#define BOARD_HAS_NO_RESET
#define BOARD_HAS_NO_BOOTLOADER
boards/px4/sitl/src/board_config.h
-1
View File
@@ -42,7 +42,6 @@
#define BOARD_OVERRIDE_UUID "SIMULATIONID0000" // must be of length 16
#define PX4_SOC_ARCH_ID PX4_SOC_ARCH_ID_SITL
#define BOARD_NAME "PX4_SITL"
#define BOARD_BATTERY1_V_DIV (10.177939394f)
#define BOARD_BATTERY1_A_PER_V (15.391030303f)
#define BOARD_HAS_NO_RESET
boards/stm/32f4discovery/src/board_config.h
-2
View File
@@ -81,8 +81,6 @@
#define HRT_TIMER 8 /* use timer8 for the HRT */
#define HRT_TIMER_CHANNEL 1 /* use capture/compare channel */
#define BOARD_NAME "STM_32F4DISCOVERY"
__BEGIN_DECLS
/****************************************************************************************************
boards/stm/nucleo-F767ZI/src/board_config.h
-2
View File
@@ -312,8 +312,6 @@ __BEGIN_DECLS
# warning SDIO initialization cannot be perfomed on the IDLE thread
#endif
#define BOARD_NAME "STM_NUCLEOF767ZI"
/* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction)
* this board support the ADC system_power interface, and therefore
* provides the true logic GPIO BOARD_ADC_xxxx macros.
boards/thiemar/s2740vc-v1/src/board_config.h
-2
View File
@@ -80,8 +80,6 @@
GPIO_PORTB | GPIO_PIN6 | GPIO_OUTPUT_CLEAR)
#define BOARD_NAME "THIEMAR_S2740VC_V1"
__BEGIN_DECLS
/************************************************************************************