mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-10-19 03:43:33 +08:00
Add Gumstix AeroCore device
Based on the work of Andrew Smith [1], add board configuration and device drivers to support the Gumstix AeroCore (previously Aerodroid) board [2]. The AeroCore is an autopilot board based on a STM32F427 similar to the FMUv2. [1] https://github.com/smithandrewc/Firmware [2] https://store.gumstix.com/index.php/products/585/ Signed-off-by: Ash Charles <ashcharles@gmail.com>
This commit is contained in:
Ash Charles
@@ -0,0 +1,263 @@
|
||||
/************************************************************************************
|
||||
* configs/aerocore/include/board.h
|
||||
* include/arch/board/board.h
|
||||
*
|
||||
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ARCH_BOARD_BOARD_H
|
||||
#define __ARCH_BOARD_BOARD_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#ifndef __ASSEMBLY__
|
||||
# include <stdint.h>
|
||||
#endif
|
||||
|
||||
#include <stm32.h>
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* Clocking *************************************************************************/
|
||||
/* The AeroCore uses a 24MHz crystal connected to the HSE.
|
||||
*
|
||||
* This is the "standard" configuration as set up by arch/arm/src/stm32f40xx_rcc.c:
|
||||
* System Clock source : PLL (HSE)
|
||||
* SYSCLK(Hz) : 168000000 Determined by PLL configuration
|
||||
* HCLK(Hz) : 168000000 (STM32_RCC_CFGR_HPRE)
|
||||
* AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE)
|
||||
* APB1 Prescaler : 4 (STM32_RCC_CFGR_PPRE1)
|
||||
* APB2 Prescaler : 2 (STM32_RCC_CFGR_PPRE2)
|
||||
* HSE Frequency(Hz) : 24000000 (STM32_BOARD_XTAL)
|
||||
* PLLM : 24 (STM32_PLLCFG_PLLM)
|
||||
* PLLN : 336 (STM32_PLLCFG_PLLN)
|
||||
* PLLP : 2 (STM32_PLLCFG_PLLP)
|
||||
* PLLQ : 7 (STM32_PLLCFG_PPQ)
|
||||
* Main regulator output voltage : Scale1 mode Needed for high speed SYSCLK
|
||||
* Flash Latency(WS) : 5
|
||||
* Prefetch Buffer : OFF
|
||||
* Instruction cache : ON
|
||||
* Data cache : ON
|
||||
* Require 48MHz for USB OTG FS, : Enabled
|
||||
* SDIO and RNG clock
|
||||
*/
|
||||
|
||||
/* HSI - 16 MHz RC factory-trimmed
|
||||
* LSI - 32 KHz RC
|
||||
* HSE - On-board crystal frequency is 24MHz
|
||||
* LSE - not installed
|
||||
*/
|
||||
|
||||
#define STM32_BOARD_XTAL 24000000ul
|
||||
|
||||
#define STM32_HSI_FREQUENCY 16000000ul
|
||||
#define STM32_LSI_FREQUENCY 32000
|
||||
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
||||
|
||||
/* Main PLL Configuration.
|
||||
*
|
||||
* PLL source is HSE
|
||||
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
|
||||
* = (24,000,000 / 24) * 336
|
||||
* = 336,000,000
|
||||
* SYSCLK = PLL_VCO / PLLP
|
||||
* = 336,000,000 / 2 = 168,000,000
|
||||
* USB OTG FS, SDIO and RNG Clock
|
||||
* = PLL_VCO / PLLQ
|
||||
* = 48,000,000
|
||||
*/
|
||||
|
||||
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(24)
|
||||
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(336)
|
||||
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
|
||||
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(7)
|
||||
|
||||
#define STM32_SYSCLK_FREQUENCY 168000000ul
|
||||
|
||||
/* AHB clock (HCLK) is SYSCLK (168MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
||||
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
|
||||
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
|
||||
|
||||
/* APB1 clock (PCLK1) is HCLK/4 (42MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
|
||||
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
|
||||
|
||||
/* Timers driven from APB1 will be twice PCLK1 */
|
||||
|
||||
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
|
||||
/* APB2 clock (PCLK2) is HCLK/2 (84MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
|
||||
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
||||
|
||||
/* Timers driven from APB2 will be twice PCLK2 */
|
||||
|
||||
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
|
||||
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
|
||||
* otherwise frequency is 2xAPBx.
|
||||
* Note: TIM1,8 are on APB2, others on APB1
|
||||
*/
|
||||
|
||||
#define STM32_TIM18_FREQUENCY (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_TIM27_FREQUENCY (2*STM32_PCLK1_FREQUENCY)
|
||||
|
||||
/* Alternate function pin selections ************************************************/
|
||||
|
||||
/*
|
||||
* UARTs.
|
||||
*/
|
||||
/* USART1 on PB[6,7]: GPS */
|
||||
#define GPIO_USART1_RX GPIO_USART1_RX_2
|
||||
#define GPIO_USART1_TX GPIO_USART1_TX_2
|
||||
|
||||
/* USART2 on PD[5,6]: J5 Breakout */
|
||||
#define GPIO_USART2_RX GPIO_USART2_RX_2
|
||||
#define GPIO_USART2_TX GPIO_USART2_TX_2
|
||||
#define GPIO_USART2_CTS 0 // unused
|
||||
#define GPIO_USART2_RTS 0 // unused
|
||||
|
||||
/* USART3 on PD[8,9]: to DuoVero UART2 */
|
||||
#define GPIO_USART3_RX GPIO_USART3_RX_3
|
||||
#define GPIO_USART3_TX GPIO_USART3_TX_3
|
||||
#define GPIO_USART3_CTS 0 // unused
|
||||
#define GPIO_USART3_RTS 0 // unused
|
||||
|
||||
/* UART7 on PE[78]: J7 Breakout */
|
||||
#define GPIO_UART7_RX GPIO_UART7_RX_1
|
||||
#define GPIO_UART7_TX GPIO_UART7_TX_1
|
||||
|
||||
/*
|
||||
* UART8 on PE[0-1]: System Console on Port C of USB (J7)
|
||||
* No alternate pin config
|
||||
*/
|
||||
|
||||
/* USART[1,6] require a RX DMA configuration */
|
||||
#define DMAMAP_USART1_RX DMAMAP_USART1_RX_2
|
||||
#define DMAMAP_USART6_RX DMAMAP_USART6_RX_2
|
||||
|
||||
/*
|
||||
* I2C
|
||||
*
|
||||
* The optional _GPIO configurations allow the I2C driver to manually
|
||||
* reset the bus to clear stuck slaves. They match the pin configuration,
|
||||
* but are normally-high GPIOs.
|
||||
*/
|
||||
|
||||
/* PB[10-11]: I2C2 is broken out on J9 header */
|
||||
#define GPIO_I2C2_SCL GPIO_I2C2_SCL_1
|
||||
#define GPIO_I2C2_SDA GPIO_I2C2_SDA_1
|
||||
#define GPIO_I2C2_SCL_GPIO (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN10)
|
||||
#define GPIO_I2C2_SDA_GPIO (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN11)
|
||||
|
||||
/*
|
||||
* SPI
|
||||
*/
|
||||
/* PA[4-7] SPI1 broken out on J12 */
|
||||
#define GPIO_SPI1_NSS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN4) /* should be GPIO_SPI1_NSS_2 but use as a GPIO */
|
||||
#define GPIO_SPI1_SCK (GPIO_SPI1_SCK_1|GPIO_SPEED_50MHz)
|
||||
#define GPIO_SPI1_MISO (GPIO_SPI1_MISO_1|GPIO_SPEED_50MHz)
|
||||
#define GPIO_SPI1_MOSI (GPIO_SPI1_MOSI_1|GPIO_SPEED_50MHz)
|
||||
|
||||
/* PB[12-15]: SPI2 connected to DuoVero SPI1 */
|
||||
#define GPIO_SPI2_NSS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN9) /* should be GPIO_SPI2_NSS_2 but use as a GPIO */
|
||||
#define GPIO_SPI2_SCK (GPIO_SPI2_SCK_2|GPIO_SPEED_50MHz)
|
||||
#define GPIO_SPI2_MISO (GPIO_SPI2_MISO_1|GPIO_SPEED_50MHz)
|
||||
#define GPIO_SPI2_MOSI (GPIO_SPI2_MOSI_1|GPIO_SPEED_50MHz)
|
||||
|
||||
/* PC[10-12]: SPI3 connected to onboard sensors */
|
||||
#define GPIO_SPI3_SCK (GPIO_SPI3_SCK_2|GPIO_SPEED_50MHz)
|
||||
#define GPIO_SPI3_MISO (GPIO_SPI3_MISO_2|GPIO_SPEED_50MHz)
|
||||
#define GPIO_SPI3_MOSI (GPIO_SPI3_MOSI_2|GPIO_SPEED_50MHz)
|
||||
|
||||
/* PE[11-14]: SPI4 connected to FRAM */
|
||||
#define GPIO_SPI4_NSS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN11) /* should be GPIO_SPI4_NSS_2 but use as a GPIO */
|
||||
#define GPIO_SPI4_SCK (GPIO_SPI4_SCK_2|GPIO_SPEED_50MHz)
|
||||
#define GPIO_SPI4_MISO (GPIO_SPI4_MISO_2|GPIO_SPEED_50MHz)
|
||||
#define GPIO_SPI4_MOSI (GPIO_SPI4_MOSI_2|GPIO_SPEED_50MHz)
|
||||
|
||||
/************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
#define EXTERN extern "C"
|
||||
extern "C" {
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Function Prototypes
|
||||
************************************************************************************/
|
||||
/************************************************************************************
|
||||
* Name: stm32_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the intitialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
EXTERN void stm32_boardinitialize(void);
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __ARCH_BOARD_BOARD_H */
|
||||
@@ -0,0 +1,42 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (C) 2013 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* nsh_romfsetc.h
|
||||
*
|
||||
* This file is a stub for 'make export' purposes; the actual ROMFS
|
||||
* must be supplied by the library client.
|
||||
*/
|
||||
|
||||
extern unsigned char romfs_img[];
|
||||
extern unsigned int romfs_img_len;
|
||||
@@ -0,0 +1,179 @@
|
||||
############################################################################
|
||||
# configs/aerocore/nsh/Make.defs
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
|
||||
#
|
||||
# We only support building with the ARM bare-metal toolchain from
|
||||
# https://launchpad.net/gcc-arm-embedded on Windows, Linux or Mac OS.
|
||||
#
|
||||
CONFIG_ARMV7M_TOOLCHAIN := GNU_EABI
|
||||
|
||||
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
MAXOPTIMIZATION = -O3
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m4 \
|
||||
-mthumb \
|
||||
-march=armv7e-m \
|
||||
-mfpu=fpv4-sp-d16 \
|
||||
-mfloat-abi=hard
|
||||
|
||||
|
||||
# enable precise stack overflow tracking
|
||||
INSTRUMENTATIONDEFINES = -finstrument-functions \
|
||||
-ffixed-r10
|
||||
|
||||
# pull in *just* libm from the toolchain ... this is grody
|
||||
LIBM = "${shell $(CC) $(ARCHCPUFLAGS) -print-file-name=libm.a}"
|
||||
EXTRA_LIBS += $(LIBM)
|
||||
|
||||
# use our linker script
|
||||
LDSCRIPT = ld.script
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
|
||||
else
|
||||
ifeq ($(PX4_WINTOOL),y)
|
||||
# Windows-native toolchains (MSYS)
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
|
||||
endif
|
||||
endif
|
||||
|
||||
# tool versions
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
# optimisation flags
|
||||
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) \
|
||||
-fno-strict-aliasing \
|
||||
-fno-strength-reduce \
|
||||
-fomit-frame-pointer \
|
||||
-funsafe-math-optimizations \
|
||||
-fno-builtin-printf \
|
||||
-ffunction-sections \
|
||||
-fdata-sections
|
||||
|
||||
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
|
||||
ARCHOPTIMIZATION += -g
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -std=gnu99
|
||||
ARCHCXXFLAGS = -fno-exceptions -fno-rtti -std=gnu++0x
|
||||
ARCHWARNINGS = -Wall \
|
||||
-Wextra \
|
||||
-Wdouble-promotion \
|
||||
-Wshadow \
|
||||
-Wfloat-equal \
|
||||
-Wframe-larger-than=1024 \
|
||||
-Wpointer-arith \
|
||||
-Wlogical-op \
|
||||
-Wmissing-declarations \
|
||||
-Wpacked \
|
||||
-Wno-unused-parameter
|
||||
# -Wcast-qual - generates spurious noreturn attribute warnings, try again later
|
||||
# -Wconversion - would be nice, but too many "risky-but-safe" conversions in the code
|
||||
# -Wcast-align - would help catch bad casts in some cases, but generates too many false positives
|
||||
|
||||
ARCHCWARNINGS = $(ARCHWARNINGS) \
|
||||
-Wbad-function-cast \
|
||||
-Wstrict-prototypes \
|
||||
-Wold-style-declaration \
|
||||
-Wmissing-parameter-type \
|
||||
-Wmissing-prototypes \
|
||||
-Wnested-externs \
|
||||
-Wunsuffixed-float-constants
|
||||
ARCHWARNINGSXX = $(ARCHWARNINGS) \
|
||||
-Wno-psabi
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
# this seems to be the only way to add linker flags
|
||||
EXTRA_LIBS += --warn-common \
|
||||
--gc-sections
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHCWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -fno-common
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
|
||||
# produce partially-linked $1 from files in $2
|
||||
define PRELINK
|
||||
@echo "PRELINK: $1"
|
||||
$(Q) $(LD) -Ur -o $1 $2 && $(OBJCOPY) --localize-hidden $1
|
||||
endef
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
@@ -0,0 +1,42 @@
|
||||
############################################################################
|
||||
# configs/aerocore/nsh/appconfig
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
# Path to example in apps/examples containing the user_start entry point
|
||||
|
||||
CONFIGURED_APPS += examples/nsh
|
||||
|
||||
# The NSH application library
|
||||
CONFIGURED_APPS += nshlib
|
||||
CONFIGURED_APPS += system/readline
|
||||
@@ -0,0 +1,950 @@
|
||||
#
|
||||
# Automatically generated file; DO NOT EDIT.
|
||||
# Nuttx/ Configuration
|
||||
#
|
||||
CONFIG_NUTTX_NEWCONFIG=y
|
||||
|
||||
#
|
||||
# Build Setup
|
||||
#
|
||||
# CONFIG_EXPERIMENTAL is not set
|
||||
CONFIG_HOST_LINUX=y
|
||||
# CONFIG_HOST_OSX is not set
|
||||
# CONFIG_HOST_WINDOWS is not set
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
|
||||
#
|
||||
# Build Configuration
|
||||
#
|
||||
CONFIG_APPS_DIR="../apps"
|
||||
# CONFIG_BUILD_2PASS is not set
|
||||
|
||||
#
|
||||
# Binary Output Formats
|
||||
#
|
||||
# CONFIG_RRLOAD_BINARY is not set
|
||||
# CONFIG_INTELHEX_BINARY is not set
|
||||
# CONFIG_MOTOROLA_SREC is not set
|
||||
CONFIG_RAW_BINARY=y
|
||||
|
||||
#
|
||||
# Customize Header Files
|
||||
#
|
||||
# CONFIG_ARCH_STDBOOL_H is not set
|
||||
CONFIG_ARCH_MATH_H=y
|
||||
# CONFIG_ARCH_FLOAT_H is not set
|
||||
# CONFIG_ARCH_STDARG_H is not set
|
||||
|
||||
#
|
||||
# Debug Options
|
||||
#
|
||||
# CONFIG_DEBUG is not set
|
||||
# CONFIG_DEBUG_SYMBOLS is not set
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_8051 is not set
|
||||
CONFIG_ARCH_ARM=y
|
||||
# CONFIG_ARCH_AVR is not set
|
||||
# CONFIG_ARCH_HC is not set
|
||||
# CONFIG_ARCH_MIPS is not set
|
||||
# CONFIG_ARCH_RGMP is not set
|
||||
# CONFIG_ARCH_SH is not set
|
||||
# CONFIG_ARCH_SIM is not set
|
||||
# CONFIG_ARCH_X86 is not set
|
||||
# CONFIG_ARCH_Z16 is not set
|
||||
# CONFIG_ARCH_Z80 is not set
|
||||
CONFIG_ARCH="arm"
|
||||
|
||||
#
|
||||
# ARM Options
|
||||
#
|
||||
# CONFIG_ARCH_CHIP_C5471 is not set
|
||||
# CONFIG_ARCH_CHIP_CALYPSO is not set
|
||||
# CONFIG_ARCH_CHIP_DM320 is not set
|
||||
# CONFIG_ARCH_CHIP_IMX is not set
|
||||
# CONFIG_ARCH_CHIP_KINETIS is not set
|
||||
# CONFIG_ARCH_CHIP_KL is not set
|
||||
# CONFIG_ARCH_CHIP_LM is not set
|
||||
# CONFIG_ARCH_CHIP_LPC17XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC214X is not set
|
||||
# CONFIG_ARCH_CHIP_LPC2378 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||
# CONFIG_ARCH_CHIP_NUC1XX is not set
|
||||
# CONFIG_ARCH_CHIP_SAM34 is not set
|
||||
CONFIG_ARCH_CHIP_STM32=y
|
||||
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||
CONFIG_ARCH_CORTEXM4=y
|
||||
CONFIG_ARCH_FAMILY="armv7-m"
|
||||
CONFIG_ARCH_CHIP="stm32"
|
||||
CONFIG_ARMV7M_USEBASEPRI=y
|
||||
CONFIG_ARCH_HAVE_CMNVECTOR=y
|
||||
CONFIG_ARMV7M_CMNVECTOR=y
|
||||
CONFIG_ARCH_HAVE_FPU=y
|
||||
CONFIG_ARCH_FPU=y
|
||||
CONFIG_ARCH_HAVE_MPU=y
|
||||
# CONFIG_ARMV7M_MPU is not set
|
||||
|
||||
#
|
||||
# ARMV7M Configuration Options
|
||||
#
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
|
||||
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
|
||||
CONFIG_ARMV7M_STACKCHECK=y
|
||||
CONFIG_SERIAL_TERMIOS=y
|
||||
|
||||
#
|
||||
# STM32 Configuration Options
|
||||
#
|
||||
# CONFIG_ARCH_CHIP_STM32L151C6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151C8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151R6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151R8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151RB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151V6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151V8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151VB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152C6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152C8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152R6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152R8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152RB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152V6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152V8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152VB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100C8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100R8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100RB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100RC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100RD is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100RE is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100V8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100VB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100VC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100VD is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100VE is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103C4 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103C8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F107VC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F207IG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302CC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302RB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302RC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302VB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302VC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303CC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303RB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303RC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303VB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303VC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F405RG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F405VG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F405ZG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407VE is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407VG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407ZE is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407ZG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407IE is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407IG is not set
|
||||
CONFIG_ARCH_CHIP_STM32F427V=y
|
||||
# CONFIG_ARCH_CHIP_STM32F427Z is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F427I is not set
|
||||
# CONFIG_STM32_STM32L15XX is not set
|
||||
# CONFIG_STM32_ENERGYLITE is not set
|
||||
# CONFIG_STM32_STM32F10XX is not set
|
||||
# CONFIG_STM32_VALUELINE is not set
|
||||
# CONFIG_STM32_CONNECTIVITYLINE is not set
|
||||
# CONFIG_STM32_PERFORMANCELINE is not set
|
||||
# CONFIG_STM32_HIGHDENSITY is not set
|
||||
# CONFIG_STM32_MEDIUMDENSITY is not set
|
||||
# CONFIG_STM32_LOWDENSITY is not set
|
||||
# CONFIG_STM32_STM32F20XX is not set
|
||||
# CONFIG_STM32_STM32F30XX is not set
|
||||
CONFIG_STM32_STM32F40XX=y
|
||||
CONFIG_STM32_STM32F427=y
|
||||
# CONFIG_STM32_DFU is not set
|
||||
|
||||
#
|
||||
# STM32 Peripheral Support
|
||||
#
|
||||
CONFIG_STM32_ADC1=y
|
||||
# CONFIG_STM32_ADC2 is not set
|
||||
# CONFIG_STM32_ADC3 is not set
|
||||
CONFIG_STM32_BKPSRAM=y
|
||||
# CONFIG_STM32_CAN1 is not set
|
||||
# CONFIG_STM32_CAN2 is not set
|
||||
CONFIG_STM32_CCMDATARAM=y
|
||||
# CONFIG_STM32_CRC is not set
|
||||
# CONFIG_STM32_CRYP is not set
|
||||
CONFIG_STM32_DMA1=y
|
||||
CONFIG_STM32_DMA2=y
|
||||
# CONFIG_STM32_DAC1 is not set
|
||||
# CONFIG_STM32_DAC2 is not set
|
||||
# CONFIG_STM32_DCMI is not set
|
||||
# CONFIG_STM32_ETHMAC is not set
|
||||
# CONFIG_STM32_FSMC is not set
|
||||
# CONFIG_STM32_HASH is not set
|
||||
# CONFIG_STM32_I2C1 is not set
|
||||
CONFIG_STM32_I2C2=y
|
||||
# CONFIG_STM32_I2C3 is not set
|
||||
# CONFIG_STM32_OTGFS is not set
|
||||
# CONFIG_STM32_OTGHS is not set
|
||||
CONFIG_STM32_PWR=y
|
||||
# CONFIG_STM32_RNG is not set
|
||||
# CONFIG_STM32_SDIO is not set
|
||||
CONFIG_STM32_SPI1=y
|
||||
CONFIG_STM32_SPI2=y
|
||||
CONFIG_STM32_SPI3=y
|
||||
CONFIG_STM32_SPI4=y
|
||||
# CONFIG_STM32_SPI5 is not set
|
||||
# CONFIG_STM32_SPI6 is not set
|
||||
CONFIG_STM32_SYSCFG=y
|
||||
CONFIG_STM32_TIM1=y
|
||||
# CONFIG_STM32_TIM2 is not set
|
||||
CONFIG_STM32_TIM3=y
|
||||
CONFIG_STM32_TIM4=y
|
||||
CONFIG_STM32_TIM5=y
|
||||
# CONFIG_STM32_TIM6 is not set
|
||||
# CONFIG_STM32_TIM7 is not set
|
||||
# CONFIG_STM32_TIM8 is not set
|
||||
CONFIG_STM32_TIM9=y
|
||||
# CONFIG_STM32_TIM10 is not set
|
||||
# CONFIG_STM32_TIM11 is not set
|
||||
# CONFIG_STM32_TIM12 is not set
|
||||
# CONFIG_STM32_TIM13 is not set
|
||||
# CONFIG_STM32_TIM14 is not set
|
||||
CONFIG_STM32_USART1=y
|
||||
CONFIG_STM32_USART2=y
|
||||
CONFIG_STM32_USART3=y
|
||||
# CONFIG_STM32_UART4 is not set
|
||||
# CONFIG_STM32_UART5 is not set
|
||||
# CONFIG_STM32_USART6 is not set
|
||||
CONFIG_STM32_UART7=y
|
||||
CONFIG_STM32_UART8=y
|
||||
# CONFIG_STM32_IWDG is not set
|
||||
CONFIG_STM32_WWDG=y
|
||||
CONFIG_STM32_ADC=y
|
||||
CONFIG_STM32_SPI=y
|
||||
CONFIG_STM32_I2C=y
|
||||
|
||||
#
|
||||
# Alternate Pin Mapping
|
||||
#
|
||||
CONFIG_STM32_FLASH_PREFETCH=y
|
||||
# CONFIG_STM32_JTAG_DISABLE is not set
|
||||
# CONFIG_STM32_JTAG_FULL_ENABLE is not set
|
||||
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
|
||||
CONFIG_STM32_JTAG_SW_ENABLE=y
|
||||
CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
|
||||
# CONFIG_STM32_FORCEPOWER is not set
|
||||
# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
|
||||
# CONFIG_STM32_CCMEXCLUDE is not set
|
||||
CONFIG_STM32_DMACAPABLE=y
|
||||
# CONFIG_STM32_TIM1_PWM is not set
|
||||
# CONFIG_STM32_TIM3_PWM is not set
|
||||
# CONFIG_STM32_TIM4_PWM is not set
|
||||
# CONFIG_STM32_TIM5_PWM is not set
|
||||
# CONFIG_STM32_TIM9_PWM is not set
|
||||
# CONFIG_STM32_TIM1_ADC is not set
|
||||
# CONFIG_STM32_TIM3_ADC is not set
|
||||
# CONFIG_STM32_TIM4_ADC is not set
|
||||
# CONFIG_STM32_TIM5_ADC is not set
|
||||
CONFIG_STM32_USART=y
|
||||
|
||||
#
|
||||
# U[S]ART Configuration
|
||||
#
|
||||
# CONFIG_USART1_RS485 is not set
|
||||
CONFIG_USART1_RXDMA=y
|
||||
# CONFIG_USART2_RS485 is not set
|
||||
CONFIG_USART2_RXDMA=y
|
||||
# CONFIG_USART3_RS485 is not set
|
||||
CONFIG_USART3_RXDMA=y
|
||||
# CONFIG_UART7_RS485 is not set
|
||||
CONFIG_UART7_RXDMA=y
|
||||
# CONFIG_UART8_RS485 is not set
|
||||
CONFIG_UART8_RXDMA=y
|
||||
CONFIG_SERIAL_DISABLE_REORDERING=y
|
||||
CONFIG_STM32_USART_SINGLEWIRE=y
|
||||
|
||||
#
|
||||
# SPI Configuration
|
||||
#
|
||||
# CONFIG_STM32_SPI_INTERRUPTS is not set
|
||||
# CONFIG_STM32_SPI_DMA is not set
|
||||
|
||||
#
|
||||
# I2C Configuration
|
||||
#
|
||||
# CONFIG_STM32_I2C_DYNTIMEO is not set
|
||||
CONFIG_STM32_I2CTIMEOSEC=0
|
||||
CONFIG_STM32_I2CTIMEOMS=10
|
||||
CONFIG_STM32_I2CTIMEOTICKS=500
|
||||
# CONFIG_STM32_I2C_DUTY16_9 is not set
|
||||
|
||||
#
|
||||
# USB Host Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# USB Device Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# External Memory Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Architecture Options
|
||||
#
|
||||
# CONFIG_ARCH_NOINTC is not set
|
||||
# CONFIG_ARCH_VECNOTIRQ is not set
|
||||
CONFIG_ARCH_DMA=y
|
||||
CONFIG_ARCH_IRQPRIO=y
|
||||
# CONFIG_CUSTOM_STACK is not set
|
||||
# CONFIG_ADDRENV is not set
|
||||
CONFIG_ARCH_HAVE_VFORK=y
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
|
||||
CONFIG_ARCH_HAVE_RAMVECTORS=y
|
||||
# CONFIG_ARCH_RAMVECTORS is not set
|
||||
|
||||
#
|
||||
# Board Settings
|
||||
#
|
||||
CONFIG_BOARD_LOOPSPERMSEC=16717
|
||||
# CONFIG_ARCH_CALIBRATION is not set
|
||||
CONFIG_DRAM_START=0x20000000
|
||||
CONFIG_DRAM_SIZE=262144
|
||||
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=4096
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||
CONFIG_BOOT_RUNFROMFLASH=y
|
||||
# CONFIG_BOOT_RUNFROMISRAM is not set
|
||||
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||
# CONFIG_BOOT_COPYTORAM is not set
|
||||
|
||||
#
|
||||
# Board Selection
|
||||
#
|
||||
CONFIG_ARCH_BOARD_CUSTOM=y
|
||||
CONFIG_ARCH_BOARD=""
|
||||
|
||||
#
|
||||
# Common Board Options
|
||||
#
|
||||
CONFIG_NSH_MMCSDMINOR=0
|
||||
|
||||
#
|
||||
# Board-Specific Options
|
||||
#
|
||||
|
||||
#
|
||||
# RTOS Features
|
||||
#
|
||||
# CONFIG_BOARD_INITIALIZE is not set
|
||||
CONFIG_MSEC_PER_TICK=1
|
||||
CONFIG_RR_INTERVAL=0
|
||||
CONFIG_SCHED_INSTRUMENTATION=y
|
||||
CONFIG_TASK_NAME_SIZE=24
|
||||
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||
# CONFIG_JULIAN_TIME is not set
|
||||
CONFIG_START_YEAR=1970
|
||||
CONFIG_START_MONTH=1
|
||||
CONFIG_START_DAY=1
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
CONFIG_PRIORITY_INHERITANCE=y
|
||||
CONFIG_SEM_PREALLOCHOLDERS=0
|
||||
CONFIG_SEM_NNESTPRIO=8
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
CONFIG_FDCLONE_STDIO=y
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
# CONFIG_SCHED_STARTHOOK is not set
|
||||
CONFIG_SCHED_ATEXIT=y
|
||||
CONFIG_SCHED_ATEXIT_MAX=1
|
||||
# CONFIG_SCHED_ONEXIT is not set
|
||||
CONFIG_USER_ENTRYPOINT="nsh_main"
|
||||
# CONFIG_DISABLE_OS_API is not set
|
||||
|
||||
#
|
||||
# Signal Numbers
|
||||
#
|
||||
CONFIG_SIG_SIGUSR1=1
|
||||
CONFIG_SIG_SIGUSR2=2
|
||||
CONFIG_SIG_SIGALARM=3
|
||||
CONFIG_SIG_SIGCONDTIMEDOUT=16
|
||||
CONFIG_SIG_SIGWORK=4
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
#
|
||||
CONFIG_MAX_TASKS=32
|
||||
CONFIG_MAX_TASK_ARGS=10
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
CONFIG_NFILE_DESCRIPTORS=36
|
||||
CONFIG_NFILE_STREAMS=8
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_PREALLOC_MQ_MSGS=4
|
||||
CONFIG_MQ_MAXMSGSIZE=32
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=50
|
||||
CONFIG_PREALLOC_TIMERS=50
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
#
|
||||
CONFIG_IDLETHREAD_STACKSIZE=6000
|
||||
CONFIG_USERMAIN_STACKSIZE=4096
|
||||
CONFIG_PTHREAD_STACK_MIN=512
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
# CONFIG_DISABLE_POLL is not set
|
||||
CONFIG_DEV_NULL=y
|
||||
# CONFIG_DEV_ZERO is not set
|
||||
# CONFIG_LOOP is not set
|
||||
# CONFIG_RAMDISK is not set
|
||||
# CONFIG_CAN is not set
|
||||
# CONFIG_PWM is not set
|
||||
CONFIG_I2C=y
|
||||
# CONFIG_I2C_SLAVE is not set
|
||||
CONFIG_I2C_TRANSFER=y
|
||||
# CONFIG_I2C_WRITEREAD is not set
|
||||
# CONFIG_I2C_POLLED is not set
|
||||
# CONFIG_I2C_TRACE is not set
|
||||
CONFIG_ARCH_HAVE_I2CRESET=y
|
||||
CONFIG_I2C_RESET=y
|
||||
CONFIG_SPI=y
|
||||
# CONFIG_SPI_OWNBUS is not set
|
||||
CONFIG_SPI_EXCHANGE=y
|
||||
# CONFIG_SPI_CMDDATA is not set
|
||||
# CONFIG_RTC is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
# CONFIG_ANALOG is not set
|
||||
# CONFIG_AUDIO_DEVICES is not set
|
||||
# CONFIG_BCH is not set
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_LCD is not set
|
||||
# CONFIG_MMCSD is not set
|
||||
CONFIG_MTD=y
|
||||
|
||||
#
|
||||
# MTD Configuration
|
||||
#
|
||||
CONFIG_MTD_PARTITION=y
|
||||
CONFIG_MTD_BYTE_WRITE=y
|
||||
|
||||
#
|
||||
# MTD Device Drivers
|
||||
#
|
||||
# CONFIG_RAMMTD is not set
|
||||
# CONFIG_MTD_AT24XX is not set
|
||||
# CONFIG_MTD_AT45DB is not set
|
||||
# CONFIG_MTD_M25P is not set
|
||||
# CONFIG_MTD_SMART is not set
|
||||
CONFIG_MTD_RAMTRON=y
|
||||
CONFIG_RAMTRON_FUJITSU=y
|
||||
# CONFIG_MTD_SST25 is not set
|
||||
# CONFIG_MTD_SST39FV is not set
|
||||
# CONFIG_MTD_W25 is not set
|
||||
CONFIG_PIPES=y
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_POWER is not set
|
||||
# CONFIG_SENSORS is not set
|
||||
CONFIG_SERIAL=y
|
||||
# CONFIG_DEV_LOWCONSOLE is not set
|
||||
# CONFIG_16550_UART is not set
|
||||
CONFIG_ARCH_HAVE_UART7=y
|
||||
CONFIG_ARCH_HAVE_UART8=y
|
||||
CONFIG_ARCH_HAVE_USART1=y
|
||||
CONFIG_ARCH_HAVE_USART2=y
|
||||
CONFIG_ARCH_HAVE_USART3=y
|
||||
CONFIG_MCU_SERIAL=y
|
||||
CONFIG_STANDARD_SERIAL=y
|
||||
CONFIG_SERIAL_NPOLLWAITERS=2
|
||||
# CONFIG_USART1_SERIAL_CONSOLE is not set
|
||||
# CONFIG_USART2_SERIAL_CONSOLE is not set
|
||||
# CONFIG_USART3_SERIAL_CONSOLE is not set
|
||||
# CONFIG_UART7_SERIAL_CONSOLE is not set
|
||||
CONFIG_UART8_SERIAL_CONSOLE=y
|
||||
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||
|
||||
#
|
||||
# USART1 Configuration
|
||||
#
|
||||
CONFIG_USART1_RXBUFSIZE=512
|
||||
CONFIG_USART1_TXBUFSIZE=512
|
||||
CONFIG_USART1_BAUD=115200
|
||||
CONFIG_USART1_BITS=8
|
||||
CONFIG_USART1_PARITY=0
|
||||
CONFIG_USART1_2STOP=0
|
||||
# CONFIG_USART1_IFLOWCONTROL is not set
|
||||
# CONFIG_USART1_OFLOWCONTROL is not set
|
||||
|
||||
#
|
||||
# USART2 Configuration
|
||||
#
|
||||
CONFIG_USART2_RXBUFSIZE=512
|
||||
CONFIG_USART2_TXBUFSIZE=512
|
||||
CONFIG_USART2_BAUD=115200
|
||||
CONFIG_USART2_BITS=8
|
||||
CONFIG_USART2_PARITY=0
|
||||
CONFIG_USART2_2STOP=0
|
||||
# CONFIG_USART2_IFLOWCONTROL is not set
|
||||
# CONFIG_USART2_OFLOWCONTROL is not set
|
||||
|
||||
#
|
||||
# USART3 Configuration
|
||||
#
|
||||
CONFIG_USART3_RXBUFSIZE=512
|
||||
CONFIG_USART3_TXBUFSIZE=512
|
||||
CONFIG_USART3_BAUD=115200
|
||||
CONFIG_USART3_BITS=8
|
||||
CONFIG_USART3_PARITY=0
|
||||
CONFIG_USART3_2STOP=0
|
||||
# CONFIG_USART3_IFLOWCONTROL is not set
|
||||
# CONFIG_USART3_OFLOWCONTROL is not set
|
||||
|
||||
#
|
||||
# UART7 Configuration
|
||||
#
|
||||
CONFIG_UART7_RXBUFSIZE=512
|
||||
CONFIG_UART7_TXBUFSIZE=512
|
||||
CONFIG_UART7_BAUD=115200
|
||||
CONFIG_UART7_BITS=8
|
||||
CONFIG_UART7_PARITY=0
|
||||
CONFIG_UART7_2STOP=0
|
||||
# CONFIG_UART7_IFLOWCONTROL is not set
|
||||
# CONFIG_UART7_OFLOWCONTROL is not set
|
||||
|
||||
#
|
||||
# UART8 Configuration
|
||||
#
|
||||
CONFIG_UART8_RXBUFSIZE=512
|
||||
CONFIG_UART8_TXBUFSIZE=512
|
||||
CONFIG_UART8_BAUD=115200
|
||||
CONFIG_UART8_BITS=8
|
||||
CONFIG_UART8_PARITY=0
|
||||
CONFIG_UART8_2STOP=0
|
||||
# CONFIG_UART8_IFLOWCONTROL is not set
|
||||
# CONFIG_UART8_OFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_IFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_OFLOWCONTROL is not set
|
||||
# CONFIG_USBDEV is not set
|
||||
# CONFIG_USBHOST is not set
|
||||
# CONFIG_WIRELESS is not set
|
||||
|
||||
#
|
||||
# System Logging Device Options
|
||||
#
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_RAMLOG is not set
|
||||
|
||||
#
|
||||
# Networking Support
|
||||
#
|
||||
# CONFIG_NET is not set
|
||||
|
||||
#
|
||||
# File Systems
|
||||
#
|
||||
|
||||
#
|
||||
# File system configuration
|
||||
#
|
||||
# CONFIG_DISABLE_MOUNTPOINT is not set
|
||||
# CONFIG_FS_RAMMAP is not set
|
||||
CONFIG_FS_FAT=y
|
||||
CONFIG_FAT_LCNAMES=y
|
||||
CONFIG_FAT_LFN=y
|
||||
CONFIG_FAT_MAXFNAME=32
|
||||
CONFIG_FS_FATTIME=y
|
||||
CONFIG_FAT_DMAMEMORY=y
|
||||
CONFIG_FS_NXFFS=y
|
||||
CONFIG_NXFFS_PREALLOCATED=y
|
||||
CONFIG_NXFFS_ERASEDSTATE=0xff
|
||||
CONFIG_NXFFS_PACKTHRESHOLD=32
|
||||
CONFIG_NXFFS_MAXNAMLEN=32
|
||||
CONFIG_NXFFS_TAILTHRESHOLD=2048
|
||||
CONFIG_FS_ROMFS=y
|
||||
# CONFIG_FS_SMARTFS is not set
|
||||
CONFIG_FS_BINFS=y
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_SYSLOG_ENABLE is not set
|
||||
# CONFIG_SYSLOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_NX is not set
|
||||
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
# CONFIG_MM_MULTIHEAP is not set
|
||||
# CONFIG_MM_SMALL is not set
|
||||
CONFIG_MM_REGIONS=2
|
||||
CONFIG_GRAN=y
|
||||
# CONFIG_GRAN_SINGLE is not set
|
||||
# CONFIG_GRAN_INTR is not set
|
||||
|
||||
#
|
||||
# Audio Support
|
||||
#
|
||||
# CONFIG_AUDIO is not set
|
||||
|
||||
#
|
||||
# Binary Formats
|
||||
#
|
||||
# CONFIG_BINFMT_DISABLE is not set
|
||||
# CONFIG_BINFMT_EXEPATH is not set
|
||||
# CONFIG_NXFLAT is not set
|
||||
# CONFIG_ELF is not set
|
||||
CONFIG_BUILTIN=y
|
||||
# CONFIG_PIC is not set
|
||||
# CONFIG_SYMTAB_ORDEREDBYNAME is not set
|
||||
|
||||
#
|
||||
# Library Routines
|
||||
#
|
||||
|
||||
#
|
||||
# Standard C Library Options
|
||||
#
|
||||
CONFIG_STDIO_BUFFER_SIZE=32
|
||||
CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
CONFIG_LIB_HOMEDIR="/"
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||
CONFIG_LIBC_FLOATINGPOINT=y
|
||||
CONFIG_LIB_RAND_ORDER=1
|
||||
# CONFIG_EOL_IS_CR is not set
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||
# CONFIG_LIBC_EXECFUNCS is not set
|
||||
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
|
||||
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
|
||||
CONFIG_LIBC_STRERROR=y
|
||||
# CONFIG_LIBC_STRERROR_SHORT is not set
|
||||
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
CONFIG_ARCH_OPTIMIZED_FUNCTIONS=y
|
||||
CONFIG_ARCH_MEMCPY=y
|
||||
# CONFIG_ARCH_MEMCMP is not set
|
||||
# CONFIG_ARCH_MEMMOVE is not set
|
||||
# CONFIG_ARCH_MEMSET is not set
|
||||
# CONFIG_MEMSET_OPTSPEED is not set
|
||||
# CONFIG_ARCH_STRCHR is not set
|
||||
# CONFIG_ARCH_STRCMP is not set
|
||||
# CONFIG_ARCH_STRCPY is not set
|
||||
# CONFIG_ARCH_STRNCPY is not set
|
||||
# CONFIG_ARCH_STRLEN is not set
|
||||
# CONFIG_ARCH_STRNLEN is not set
|
||||
# CONFIG_ARCH_BZERO is not set
|
||||
|
||||
#
|
||||
# Non-standard Library Support
|
||||
#
|
||||
CONFIG_SCHED_WORKQUEUE=y
|
||||
CONFIG_SCHED_HPWORK=y
|
||||
CONFIG_SCHED_WORKPRIORITY=192
|
||||
CONFIG_SCHED_WORKPERIOD=5000
|
||||
CONFIG_SCHED_WORKSTACKSIZE=2000
|
||||
CONFIG_SCHED_LPWORK=y
|
||||
CONFIG_SCHED_LPWORKPRIORITY=50
|
||||
CONFIG_SCHED_LPWORKPERIOD=50000
|
||||
CONFIG_SCHED_LPWORKSTACKSIZE=2000
|
||||
# CONFIG_LIB_KBDCODEC is not set
|
||||
# CONFIG_LIB_SLCDCODEC is not set
|
||||
|
||||
#
|
||||
# Basic CXX Support
|
||||
#
|
||||
CONFIG_C99_BOOL8=y
|
||||
CONFIG_HAVE_CXX=y
|
||||
CONFIG_HAVE_CXXINITIALIZE=y
|
||||
# CONFIG_CXX_NEWLONG is not set
|
||||
|
||||
#
|
||||
# uClibc++ Standard C++ Library
|
||||
#
|
||||
# CONFIG_UCLIBCXX is not set
|
||||
|
||||
#
|
||||
# Application Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Built-In Applications
|
||||
#
|
||||
CONFIG_BUILTIN_PROXY_STACKSIZE=1024
|
||||
|
||||
#
|
||||
# Examples
|
||||
#
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CAN is not set
|
||||
# CONFIG_EXAMPLES_COMPOSITE is not set
|
||||
# CONFIG_EXAMPLES_CXXTEST is not set
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
# CONFIG_EXAMPLES_ELF is not set
|
||||
# CONFIG_EXAMPLES_FTPC is not set
|
||||
# CONFIG_EXAMPLES_FTPD is not set
|
||||
CONFIG_EXAMPLES_HELLO=y
|
||||
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||
# CONFIG_EXAMPLES_JSON is not set
|
||||
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_LCDRW is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
CONFIG_EXAMPLES_MOUNT=y
|
||||
# CONFIG_EXAMPLES_MTDPART is not set
|
||||
# CONFIG_EXAMPLES_NRF24L01TERM is not set
|
||||
CONFIG_EXAMPLES_NSH=y
|
||||
# CONFIG_EXAMPLES_NULL is not set
|
||||
# CONFIG_EXAMPLES_NX is not set
|
||||
# CONFIG_EXAMPLES_NXCONSOLE is not set
|
||||
# CONFIG_EXAMPLES_NXFFS is not set
|
||||
# CONFIG_EXAMPLES_NXFLAT is not set
|
||||
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||
# CONFIG_EXAMPLES_NXLINES is not set
|
||||
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||
# CONFIG_EXAMPLES_OSTEST is not set
|
||||
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||
# CONFIG_EXAMPLES_PIPE is not set
|
||||
# CONFIG_EXAMPLES_POSIXSPAWN is not set
|
||||
# CONFIG_EXAMPLES_QENCODER is not set
|
||||
# CONFIG_EXAMPLES_RGMP is not set
|
||||
# CONFIG_EXAMPLES_ROMFS is not set
|
||||
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||
# CONFIG_EXAMPLES_SLCD is not set
|
||||
# CONFIG_EXAMPLES_SMART_TEST is not set
|
||||
# CONFIG_EXAMPLES_SMART is not set
|
||||
# CONFIG_EXAMPLES_TCPECHO is not set
|
||||
# CONFIG_EXAMPLES_TELNETD is not set
|
||||
# CONFIG_EXAMPLES_THTTPD is not set
|
||||
# CONFIG_EXAMPLES_TIFF is not set
|
||||
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||
# CONFIG_EXAMPLES_UDP is not set
|
||||
# CONFIG_EXAMPLES_UIP is not set
|
||||
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||
# CONFIG_EXAMPLES_USBMSC is not set
|
||||
# CONFIG_EXAMPLES_USBTERM is not set
|
||||
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_TIFF is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
#
|
||||
# CONFIG_INTERPRETERS_FICL is not set
|
||||
# CONFIG_INTERPRETERS_PCODE is not set
|
||||
|
||||
#
|
||||
# Network Utilities
|
||||
#
|
||||
|
||||
#
|
||||
# Networking Utilities
|
||||
#
|
||||
# CONFIG_NETUTILS_CODECS is not set
|
||||
# CONFIG_NETUTILS_DHCPC is not set
|
||||
# CONFIG_NETUTILS_DHCPD is not set
|
||||
# CONFIG_NETUTILS_FTPC is not set
|
||||
# CONFIG_NETUTILS_FTPD is not set
|
||||
# CONFIG_NETUTILS_JSON is not set
|
||||
# CONFIG_NETUTILS_RESOLV is not set
|
||||
# CONFIG_NETUTILS_SMTP is not set
|
||||
# CONFIG_NETUTILS_TELNETD is not set
|
||||
# CONFIG_NETUTILS_TFTPC is not set
|
||||
# CONFIG_NETUTILS_THTTPD is not set
|
||||
# CONFIG_NETUTILS_UIPLIB is not set
|
||||
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||
|
||||
#
|
||||
# FreeModBus
|
||||
#
|
||||
# CONFIG_MODBUS is not set
|
||||
|
||||
#
|
||||
# NSH Library
|
||||
#
|
||||
CONFIG_NSH_LIBRARY=y
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
|
||||
#
|
||||
# Disable Individual commands
|
||||
#
|
||||
# CONFIG_NSH_DISABLE_CAT is not set
|
||||
# CONFIG_NSH_DISABLE_CD is not set
|
||||
# CONFIG_NSH_DISABLE_CP is not set
|
||||
# CONFIG_NSH_DISABLE_DD is not set
|
||||
# CONFIG_NSH_DISABLE_ECHO is not set
|
||||
# CONFIG_NSH_DISABLE_EXEC is not set
|
||||
# CONFIG_NSH_DISABLE_EXIT is not set
|
||||
# CONFIG_NSH_DISABLE_FREE is not set
|
||||
# CONFIG_NSH_DISABLE_GET is not set
|
||||
# CONFIG_NSH_DISABLE_HELP is not set
|
||||
# CONFIG_NSH_DISABLE_HEXDUMP is not set
|
||||
# CONFIG_NSH_DISABLE_IFCONFIG is not set
|
||||
# CONFIG_NSH_DISABLE_KILL is not set
|
||||
# CONFIG_NSH_DISABLE_LOSETUP is not set
|
||||
# CONFIG_NSH_DISABLE_LS is not set
|
||||
# CONFIG_NSH_DISABLE_MB is not set
|
||||
# CONFIG_NSH_DISABLE_MKDIR is not set
|
||||
# CONFIG_NSH_DISABLE_MKFATFS is not set
|
||||
# CONFIG_NSH_DISABLE_MKFIFO is not set
|
||||
# CONFIG_NSH_DISABLE_MKRD is not set
|
||||
# CONFIG_NSH_DISABLE_MH is not set
|
||||
# CONFIG_NSH_DISABLE_MOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_MW is not set
|
||||
# CONFIG_NSH_DISABLE_NSFMOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_PS is not set
|
||||
# CONFIG_NSH_DISABLE_PING is not set
|
||||
# CONFIG_NSH_DISABLE_PUT is not set
|
||||
# CONFIG_NSH_DISABLE_PWD is not set
|
||||
# CONFIG_NSH_DISABLE_RM is not set
|
||||
# CONFIG_NSH_DISABLE_RMDIR is not set
|
||||
# CONFIG_NSH_DISABLE_SET is not set
|
||||
# CONFIG_NSH_DISABLE_SH is not set
|
||||
# CONFIG_NSH_DISABLE_SLEEP is not set
|
||||
# CONFIG_NSH_DISABLE_TEST is not set
|
||||
# CONFIG_NSH_DISABLE_UMOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_UNSET is not set
|
||||
# CONFIG_NSH_DISABLE_USLEEP is not set
|
||||
# CONFIG_NSH_DISABLE_WGET is not set
|
||||
# CONFIG_NSH_DISABLE_XD is not set
|
||||
|
||||
#
|
||||
# Configure Command Options
|
||||
#
|
||||
# CONFIG_NSH_CMDOPT_DF_H is not set
|
||||
CONFIG_NSH_CODECS_BUFSIZE=128
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_STRERROR=y
|
||||
CONFIG_NSH_LINELEN=128
|
||||
CONFIG_NSH_MAXARGUMENTS=12
|
||||
CONFIG_NSH_NESTDEPTH=8
|
||||
# CONFIG_NSH_DISABLESCRIPT is not set
|
||||
# CONFIG_NSH_DISABLEBG is not set
|
||||
CONFIG_NSH_ROMFSETC=y
|
||||
# CONFIG_NSH_ROMFSRC is not set
|
||||
CONFIG_NSH_ROMFSMOUNTPT="/etc"
|
||||
CONFIG_NSH_INITSCRIPT="init.d/rcS"
|
||||
CONFIG_NSH_ROMFSDEVNO=0
|
||||
CONFIG_NSH_ROMFSSECTSIZE=128
|
||||
CONFIG_NSH_ARCHROMFS=y
|
||||
CONFIG_NSH_FATDEVNO=1
|
||||
CONFIG_NSH_FATSECTSIZE=512
|
||||
CONFIG_NSH_FATNSECTORS=1024
|
||||
CONFIG_NSH_FATMOUNTPT="/tmp"
|
||||
CONFIG_NSH_CONSOLE=y
|
||||
|
||||
#
|
||||
# USB Trace Support
|
||||
#
|
||||
# CONFIG_NSH_CONDEV is not set
|
||||
CONFIG_NSH_ARCHINIT=y
|
||||
|
||||
#
|
||||
# NxWidgets/NxWM
|
||||
#
|
||||
|
||||
#
|
||||
# System NSH Add-Ons
|
||||
#
|
||||
|
||||
#
|
||||
# Custom Free Memory Command
|
||||
#
|
||||
# CONFIG_SYSTEM_FREE is not set
|
||||
|
||||
#
|
||||
# I2C tool
|
||||
#
|
||||
CONFIG_SYSTEM_I2CTOOL=y
|
||||
CONFIG_I2CTOOL_MINBUS=0
|
||||
CONFIG_I2CTOOL_MAXBUS=3
|
||||
CONFIG_I2CTOOL_MINADDR=0x03
|
||||
CONFIG_I2CTOOL_MAXADDR=0x77
|
||||
CONFIG_I2CTOOL_MAXREGADDR=0xff
|
||||
CONFIG_I2CTOOL_DEFFREQ=4000000
|
||||
|
||||
#
|
||||
# FLASH Program Installation
|
||||
#
|
||||
# CONFIG_SYSTEM_INSTALL is not set
|
||||
|
||||
#
|
||||
# FLASH Erase-all Command
|
||||
#
|
||||
# CONFIG_SYSTEM_FLASH_ERASEALL is not set
|
||||
|
||||
#
|
||||
# readline()
|
||||
#
|
||||
CONFIG_SYSTEM_READLINE=y
|
||||
CONFIG_READLINE_ECHO=y
|
||||
|
||||
#
|
||||
# Power Off
|
||||
#
|
||||
# CONFIG_SYSTEM_POWEROFF is not set
|
||||
|
||||
#
|
||||
# RAMTRON
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTRON is not set
|
||||
|
||||
#
|
||||
# SD Card
|
||||
#
|
||||
# CONFIG_SYSTEM_SDCARD is not set
|
||||
|
||||
#
|
||||
# Sysinfo
|
||||
#
|
||||
CONFIG_SYSTEM_SYSINFO=y
|
||||
|
||||
#
|
||||
# USB Monitor
|
||||
#
|
||||
Executable
+67
@@ -0,0 +1,67 @@
|
||||
#!/bin/bash
|
||||
# configs/aerocore/nsh/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This the Cygwin path to the location where I installed the RIDE
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the RIDE toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
|
||||
|
||||
# This the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
|
||||
# This the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
@@ -0,0 +1,150 @@
|
||||
/****************************************************************************
|
||||
* configs/aerocore/common/ld.script
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* The STM32F427 has 2048Kb of FLASH beginning at address 0x0800:0000 and
|
||||
* 256Kb of SRAM. SRAM is split up into three blocks:
|
||||
*
|
||||
* 1) 112Kb of SRAM beginning at address 0x2000:0000
|
||||
* 2) 16Kb of SRAM beginning at address 0x2001:c000
|
||||
* 3) 64Kb of SRAM beginning at address 0x2002:0000
|
||||
* 4) 64Kb of TCM SRAM beginning at address 0x1000:0000
|
||||
*
|
||||
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
|
||||
* where the code expects to begin execution by jumping to the entry point in
|
||||
* the 0x0800:0000 address range.
|
||||
*
|
||||
* The first 0x4000 of flash is reserved for the bootloader.
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
flash (rx) : ORIGIN = 0x08004000, LENGTH = 2032K
|
||||
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 192K
|
||||
ccsram (rwx) : ORIGIN = 0x10000000, LENGTH = 64K
|
||||
}
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
|
||||
ENTRY(__start) /* treat __start as the anchor for dead code stripping */
|
||||
EXTERN(_vectors) /* force the vectors to be included in the output */
|
||||
|
||||
/*
|
||||
* Ensure that abort() is present in the final object. The exception handling
|
||||
* code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
|
||||
*/
|
||||
EXTERN(abort)
|
||||
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
|
||||
/*
|
||||
* This is a hack to make the newlib libm __errno() call
|
||||
* use the NuttX get_errno_ptr() function.
|
||||
*/
|
||||
__errno = get_errno_ptr;
|
||||
} > flash
|
||||
|
||||
/*
|
||||
* Init functions (static constructors and the like)
|
||||
*/
|
||||
.init_section : {
|
||||
_sinit = ABSOLUTE(.);
|
||||
KEEP(*(.init_array .init_array.*))
|
||||
_einit = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
/*
|
||||
* Construction data for parameters.
|
||||
*/
|
||||
__param ALIGN(4): {
|
||||
__param_start = ABSOLUTE(.);
|
||||
KEEP(*(__param*))
|
||||
__param_end = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} > flash
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} > flash
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > sram AT > flash
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > sram
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
@@ -0,0 +1,84 @@
|
||||
############################################################################
|
||||
# configs/aerocore/src/Makefile
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
-include $(TOPDIR)/Make.defs
|
||||
|
||||
CFLAGS += -I$(TOPDIR)/sched
|
||||
|
||||
ASRCS =
|
||||
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
||||
|
||||
CSRCS = empty.c
|
||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||
|
||||
SRCS = $(ASRCS) $(CSRCS)
|
||||
OBJS = $(AOBJS) $(COBJS)
|
||||
|
||||
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
|
||||
ifeq ($(WINTOOL),y)
|
||||
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
|
||||
else
|
||||
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
|
||||
endif
|
||||
|
||||
all: libboard$(LIBEXT)
|
||||
|
||||
$(AOBJS): %$(OBJEXT): %.S
|
||||
$(call ASSEMBLE, $<, $@)
|
||||
|
||||
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
|
||||
$(call COMPILE, $<, $@)
|
||||
|
||||
libboard$(LIBEXT): $(OBJS)
|
||||
$(call ARCHIVE, $@, $(OBJS))
|
||||
|
||||
.depend: Makefile $(SRCS)
|
||||
$(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
|
||||
$(Q) touch $@
|
||||
|
||||
depend: .depend
|
||||
|
||||
clean:
|
||||
$(call DELFILE, libboard$(LIBEXT))
|
||||
$(call CLEAN)
|
||||
|
||||
distclean: clean
|
||||
$(call DELFILE, Make.dep)
|
||||
$(call DELFILE, .depend)
|
||||
|
||||
-include Make.dep
|
||||
|
||||
@@ -0,0 +1,4 @@
|
||||
/*
|
||||
* There are no source files here, but libboard.a can't be empty, so
|
||||
* we have this empty source file to keep it company.
|
||||
*/
|
||||
Reference in New Issue
Block a user