A lot more on calibration and RC checks. Needs more testing, but no known issues

2026-10-22 19:53:34 +08:00 · 2013-08-25 16:33:14 +02:00
parent 8df6acbfaf
commit e119bbb0f1
10 changed files with 246 additions and 141 deletions
@@ -0,0 +1,148 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2013 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file rc_check.c
+ *
+ * RC calibration check
+ */
+
+#include <nuttx/config.h>
+
+#include <stdio.h>
+#include <fcntl.h>
+
+#include <systemlib/rc_check.h>
+#include <systemlib/param/param.h>
+#include <mavlink/mavlink_log.h>
+#include <uORB/topics/rc_channels.h>
+
+int rc_calibration_check(void) {
+
+	char nbuf[20];
+	param_t _parameter_handles_min, _parameter_handles_trim, _parameter_handles_max,
+	_parameter_handles_rev, _parameter_handles_dz;
+
+	int mavlink_fd = open(MAVLINK_LOG_DEVICE, 0);
+
+	float param_min, param_max, param_trim, param_rev, param_dz;
+
+	/* first check channel mappings */
+			/* check which map param applies */
+		// if (map_by_channel[i] >= MAX_CONTROL_CHANNELS) {
+		// 	mavlink_log_critical(mavlink_fd, "ERR: RC_%d_MAP >= # CHANS", i+1);
+		// 	/* give system time to flush error message in case there are more */
+		// 	usleep(100000);
+		// 	count++;
+		// }
+
+
+
+	for (int i = 0; i < RC_CHANNELS_MAX; i++) {
+		/* should the channel be enabled? */
+		uint8_t count = 0;
+
+		/* min values */
+		sprintf(nbuf, "RC%d_MIN", i + 1);
+		_parameter_handles_min = param_find(nbuf);
+		param_get(_parameter_handles_min, &param_min);
+
+		/* trim values */
+		sprintf(nbuf, "RC%d_TRIM", i + 1);
+		_parameter_handles_trim = param_find(nbuf);
+		param_get(_parameter_handles_trim, &param_trim);
+
+		/* max values */
+		sprintf(nbuf, "RC%d_MAX", i + 1);
+		_parameter_handles_max = param_find(nbuf);
+		param_get(_parameter_handles_max, &param_max);
+
+		/* channel reverse */
+		sprintf(nbuf, "RC%d_REV", i + 1);
+		_parameter_handles_rev = param_find(nbuf);
+		param_get(_parameter_handles_rev, &param_rev);
+
+		/* channel deadzone */
+		sprintf(nbuf, "RC%d_DZ", i + 1);
+		_parameter_handles_dz = param_find(nbuf);
+		param_get(_parameter_handles_dz, &param_dz);
+
+		/* assert min..center..max ordering */
+		if (param_min < 500) {
+			count++;
+			mavlink_log_critical(mavlink_fd, "ERR: RC_%d_MIN < 500", i+1);
+			/* give system time to flush error message in case there are more */
+			usleep(100000);
+		}
+		if (param_max > 2500) {
+			count++;
+			mavlink_log_critical(mavlink_fd, "ERR: RC_%d_MAX > 2500", i+1);
+			/* give system time to flush error message in case there are more */
+			usleep(100000);
+		}
+		if (param_trim < param_min) {
+			count++;
+			mavlink_log_critical(mavlink_fd, "ERR: RC_%d_TRIM < MIN", i+1);
+			/* give system time to flush error message in case there are more */
+			usleep(100000);
+		}
+		if (param_trim > param_max) {
+			count++;
+			mavlink_log_critical(mavlink_fd, "ERR: RC_%d_TRIM > MAX", i+1);
+			/* give system time to flush error message in case there are more */
+			usleep(100000);
+		}
+
+		/* assert deadzone is sane */
+		if (param_dz > 500) {
+			mavlink_log_critical(mavlink_fd, "ERR: RC_%d_DZ > 500", i+1);
+			/* give system time to flush error message in case there are more */
+			usleep(100000);
+			count++;
+		}
+
+		/* check which map param applies */
+		// if (map_by_channel[i] >= MAX_CONTROL_CHANNELS) {
+		// 	mavlink_log_critical(mavlink_fd, "ERR: RC_%d_MAP >= # CHANS", i+1);
+		// 	/* give system time to flush error message in case there are more */
+		// 	usleep(100000);
+		// 	count++;
+		// }
+
+		/* sanity checks pass, enable channel */
+		if (count) {
+			mavlink_log_critical(mavlink_fd, "ERROR: %d config error(s) for RC channel %d.", count, (i + 1));
+			usleep(100000);
+		}
+	}
+}