Shenzhou board has an SSD1289 LCD, not ILI93xx

git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5194 42af7a65-404d-4744-a932-0658087f49c3

nuttx/drivers/lcd/Kconfig

@@ -43,6 +43,7 @@ config LCD_P14201
 		p14201.c.  Driver for RiT P14201 series display with SD1329 IC
 		controller.  This OLED is used with older versions of the
 		TI/Luminary LM3S8962 Evaluation Kit.
+
 if LCD_P14201
 config P14201_NINTERFACES
 	int "Number of physical P14201 devices"
@@ -189,6 +190,33 @@ config LCD_UG9664HSWAG01
 		Technology Inc.  Used with the LPC Xpresso and Embedded Artists
 		base board.
 
+config LCD_SSD1289
+	bool "LCD Based on SSD1289 Controller"
+	default n
+	---help---
+		Enables generic support for any LCD based on the Solomon Systech,
+		Ltd, SSD1289 Controller.  Use of this driver will usually require so
+		detailed customization of the LCD initialization code as necessary
+		for the specific LCD driven by the SSD1289 controller.
+
+if LCD_SSD1289
+
+choice
+	prompt "SSD1289 Initialization Profile"
+	default SSD1289_PROFILE1
+
+config SSD1289_PROFILE1
+	bool "Profile 1"
+
+config SSD1289_PROFILE2
+	bool "Profile 2"
+
+config SSD1289_PROFILE3
+	bool "Profile 3"
+
+endchoice
+endif
+
 choice
 	prompt "LCD Orientation"
 	default LCD_LANDSCAPE

nuttx/drivers/lcd/ssd1289.c

@@ -766,7 +766,7 @@ static int ssd1289_getvideoinfo(FAR struct lcd_dev_s *dev,
 {
   DEBUGASSERT(dev && vinfo);
   lcdvdbg("fmt: %d xres: %d yres: %d nplanes: 1\n",
-          SSD1289_COLORFMT, SSD1289_XRES, SSD1289_XRES);
+          SSD1289_COLORFMT, SSD1289_XRES, SSD1289_YRES);
 
   vinfo->fmt     = SSD1289_COLORFMT;    /* Color format: RGB16-565: RRRR RGGG GGGB BBBB */
   vinfo->xres    = SSD1289_XRES;        /* Horizontal resolution in pixel columns */
@@ -925,6 +925,7 @@ static inline int ssd1289_hwinitialize(FAR struct ssd1289_dev_s *priv)
 #ifndef CONFIG_LCD_NOGETRUN
   uint16_t id;
 #endif
+  int ret;
 
   /* Select the LCD */
 
@@ -1168,19 +1169,20 @@ static inline int ssd1289_hwinitialize(FAR struct ssd1289_dev_s *priv)
       /* One driver has a 50 msec delay here */
       /* up_mdelay(50); */
 
-      return OK;
+      ret = OK;
     }
 #ifndef CONFIG_LCD_NOGETRUN
   else
     {
       lcddbg("Unsupported LCD type\n");
-      return -ENODEV;
+      ret = -ENODEV;
     }
 #endif
 
   /* De-select the LCD */
 
   lcd->deselect(lcd);
+  return ret;
 }
 
  /*************************************************************************************