fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-11-06 13:31:35 +08:00
Code Issues Packages Projects Releases Wiki Activity

New Crowdin translations - zh-CN (#25661)

Browse Source 
Co-authored-by: Crowdin Bot <support+bot@crowdin.com>
This commit is contained in:
PX4 Build Bot
2025-10-08 16:19:27 +11:00
committed by GitHub
co-authored by Crowdin Bot
parent fa706c905f
commit d3bcdf8ba7
20 changed files with 631 additions and 283 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/zh/config/_autotune.md
+27 -1
View File
@@ -95,9 +95,17 @@ The test steps are:
4. Read the warning popup and click on **OK** to start tuning.
<div style="display: inline;" v-if="$frontmatter.frame === 'Multicopter'">
4. The drone will first start to perform quick roll motions followed by pitch and yaw motions.
The progress is shown in the progress bar, next to the _Autotune_ button.
</div><div v-else-if="$frontmatter.frame === 'Plane'">
4. The drone will first start to perform quick roll motions followed by pitch and yaw motions. When [`FW_AT_SYSID_TYPE`](../advanced_config/parameter_reference.md#FW_AT_SYSID_TYPE) is set to linear/logarithmic sine sweep (recommended), the max rates are approximately 45 deg/s for roll and 30 deg/s for pitch and yaw.
The progress is shown in the progress bar, next to the _Autotune_ button.
</div>
<div style="display: inline;" v-if="$frontmatter.frame === 'Multicopter'">
5. Manually land and disarm to apply the new tuning parameters.
@@ -108,6 +116,13 @@ The test steps are:
5. The tuning will be immediately/automatically be applied and tested in flight (by default).
PX4 will then run a 4 second test and revert the new tuning if a problem is detected.
The figure below shows how steps 4 and 5 might look in flight on the pitch axis.
The pitch rate gradually increases up until it reaches the target.
This amplitude is then held while the signal frequency is increased.
You can then see how the tuned system is able to follow the setpoint in the test signal.
<img src="../../assets/config/fw/autotune.png" title="Fixed-Wing Autotune"/>
</div>
:::warning
@@ -174,9 +189,20 @@ Fast oscillations (more than 1 oscillation per second): this is because the gain
### The auto-tuning sequence fails
<div v-if="$frontmatter.frame === 'Multicopter'">
If the drone was not moving enough during auto-tuning, the system identification algorithm might have issues to find the correct coefficients.
Increase the <div style="display: inline;" v-if="$frontmatter.frame === 'Multicopter'">[MC_AT_SYSID_AMP](../advanced_config/parameter_reference.md#MC_AT_SYSID_AMP)</div><div style="display: inline;" v-else-if="$frontmatter.frame === 'Plane'">[FW_AT_SYSID_AMP](../advanced_config/parameter_reference.md#FW_AT_SYSID_AMP)</div> parameter by steps of 1 and trigger the auto-tune again.
Increase the [MC_AT_SYSID_AMP](../advanced_config/parameter_reference.md#MC_AT_SYSID_AMP) parameter by steps of 1 and trigger the auto-tune again.
</div>
<div v-else-if="$frontmatter.frame === 'Plane'">
By default, the autotune maneuvers ensure that a sufficient angular rate is reached for system identification. The target rates are approximately 45 deg/s for roll and 30 deg/s for pitch and yaw.
If the signal-to-noise ratio of the vehicle is low, the system identification algorithm might have issues finding the correct coefficients. Ensure that there is no excessive noise and/or platform vibration.
</div>
### The drone oscillates after auto-tuning