fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-18 05:23:34 +08:00
Code Issues Packages Projects Releases Wiki Activity

New Crowdin translations - zh-CN (#24563)

Browse Source 
Co-authored-by: Crowdin Bot <support+bot@crowdin.com>
This commit is contained in:
PX4 Build Bot
2025-03-19 20:59:57 +11:00
committed by GitHub
co-authored by Crowdin Bot
parent bd0a59eb1f
commit d04e6695ac
180 changed files with 2417 additions and 2402 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/zh/telemetry/crsf_telemetry.md
+21 -21
View File
@@ -77,36 +77,36 @@ To use this feature you must build and upload custom firmware that includes [crs
1. [Setup a development environment](../dev_setup/dev_env.md) for building PX4.
As part of this process you will have used `git` to fetch source code into the **PX4-Autopilot** directory.
As part of this process you will have used `git` to fetch source code into the **PX4-Autopilot** directory.
2. Open a terminal and `cd` into the `PX4-Autopilot` directory.
```sh
cd PX4-Autopilot
```
```sh
cd PX4-Autopilot
```
3. Launch the [PX4 board config tool (`menuconfig`)](../hardware/porting_guide_config.md#px4-menuconfig-setup) for your `make` target using the `boardconfig` option (here the target is the [ARK Electronics ARKV6X](../flight_controller/ark_v6x.md) flight controller):
```sh
make ark_fmu-v6x_default boardconfig
```
```sh
make ark_fmu-v6x_default boardconfig
```
4. In the PX4 board config tool:
- Disable the default `rc_input` module
1. Navigate to the `drivers` submenu, then scroll down to highlight `rc_input`.
2. Use the enter key to remove the `*` from `rc_input` checkbox.
- Enable the `crsf_rc` module
1. Scroll to highlight the `RC` submenu, then press enter to open it.
2. Scroll to highlight `crsf_rc` and press enter to enable it.
- Disable the default `rc_input` module
1. Navigate to the `drivers` submenu, then scroll down to highlight `rc_input`.
2. Use the enter key to remove the `*` from `rc_input` checkbox.
- Enable the `crsf_rc` module
1. Scroll to highlight the `RC` submenu, then press enter to open it.
2. Scroll to highlight `crsf_rc` and press enter to enable it.
Save and exit the PX4 board config tool.
Save and exit the PX4 board config tool.
5. [Build the PX4 source code](../dev_setup/building_px4.md) with your changes (again assuming you are using ARKV6X):
```sh
make ark_fmu-v6x_default
```
```sh
make ark_fmu-v6x_default
```
This will build your custom firmware, which must now be uploaded to your flight controller.
@@ -128,11 +128,11 @@ Alternatively you can use QGroundControl to install the firmware, as described i
1. [RC_CRSF_PRT_CFG](../advanced_config/parameter_reference.md#RC_CRSF_PRT_CFG) — Set to the port that is connected to the CRSF receiver (such as `TELEM1`).
This [configures the serial port](../peripherals/serial_configuration.md) to use the CRSF protocol.
Note that some serial ports may already have a [default serial port mapping](../peripherals/serial_configuration.md#default-serial-port-configuration) or [default MAVLink serial port mapping](../peripherals/mavlink_peripherals.md#default-mavlink-ports) that you will have to un-map before you can assign the port to CRSF.
For example, if you want to use `TELEM1` or `TELEM2` you first need to modify [MAV_0_CONFIG](../advanced_config/parameter_reference.md#MAV_0_CONFIG) or [MAV_1_CONFIG](../advanced_config/parameter_reference.md#MAV_1_CONFIG) to stop setting those ports.
This [configures the serial port](../peripherals/serial_configuration.md) to use the CRSF protocol.
Note that some serial ports may already have a [default serial port mapping](../peripherals/serial_configuration.md#default-serial-port-configuration) or [default MAVLink serial port mapping](../peripherals/mavlink_peripherals.md#default-mavlink-ports) that you will have to un-map before you can assign the port to CRSF.
For example, if you want to use `TELEM1` or `TELEM2` you first need to modify [MAV_0_CONFIG](../advanced_config/parameter_reference.md#MAV_0_CONFIG) or [MAV_1_CONFIG](../advanced_config/parameter_reference.md#MAV_1_CONFIG) to stop setting those ports.
There is no need to set the baud rate for the port, as this is configured by the driver.
There is no need to set the baud rate for the port, as this is configured by the driver.
2. [RC_CRSF_TEL_EN](../advanced_config/parameter_reference.md#RC_CRSF_TEL_EN) — Enable to activate Crossfire telemetry.
docs/zh/telemetry/esp8266_wifi_module.md
+1 -1
View File
@@ -30,7 +30,7 @@ Modules that accept 5.0V supply:
The Kahuna comes with a cable to connect directly to the Pixhawk-standard `TELEM1` or `TELEM2` ports.
It is pre-flashed with the latest firmware, and has a u.fl connector for an external antenna.
At most you may need to set the baud rate parameter, which for `TELEM1` is `SER_TEL1_BAUD = 57600 (57600 8N1)`.
The [User Guide](https://docs.google.com/document/d/1VyOsp9_q6dIAdYdWuDFcWoqqrNy_vbFMANubZA3Uz5g/edit?pli=1\&tab=t.0) include WiFi setup and other relevant information.
The User Guide include WiFi setup and other relevant information.
![Kahuna ESP8266 WiFi Module](../../assets/peripherals/telemetry/esp8266/beyond_robotics_kahuna_esp8266.png)