mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-10-25 14:33:33 +08:00
Initial Hex/Proficnc Cube Yellow support
This commit is contained in:
Mirko Denecke
@@ -0,0 +1,424 @@
|
||||
/************************************************************************************
|
||||
*
|
||||
* Copyright (C) 2016-2018 Gregory Nutt. All rights reserved.
|
||||
* Authors: David Sidrane <david_s5@nscdg.com>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
#ifndef __NUTTX_CONFIG_HEX_CUBE_YELLOW_INCLUDE_BOARD_H
|
||||
#define __NUTTX_CONFIG_HEX_CUBE_YELLOW_INCLUDE_BOARD_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
#include "board_dma_map.h"
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
# include <stdint.h>
|
||||
#endif
|
||||
|
||||
#include "stm32_rcc.h"
|
||||
#include "stm32_sdmmc.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* Clocking *************************************************************************/
|
||||
/* The Cube Yellow board provides the following clock sources:
|
||||
*
|
||||
* X301: 24 MHz crystal for HSE
|
||||
*
|
||||
* So we have these clock source available within the STM32
|
||||
*
|
||||
* HSI: 16 MHz RC factory-trimmed
|
||||
* HSE: 24 MHz crystal for HSE
|
||||
*/
|
||||
|
||||
#define STM32_BOARD_XTAL 24000000ul
|
||||
|
||||
#define STM32_HSI_FREQUENCY 16000000ul
|
||||
#define STM32_LSI_FREQUENCY 32000
|
||||
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
||||
#define STM32_LSE_FREQUENCY 0
|
||||
|
||||
/* Main PLL Configuration.
|
||||
*
|
||||
* PLL source is HSE = 24,000,000
|
||||
*
|
||||
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
|
||||
* Subject to:
|
||||
*
|
||||
* 2 <= PLLM <= 63
|
||||
* 192 <= PLLN <= 432
|
||||
* 192 MHz <= PLL_VCO <= 432MHz
|
||||
*
|
||||
* SYSCLK = PLL_VCO / PLLP
|
||||
* Subject to
|
||||
*
|
||||
* PLLP = {2, 4, 6, 8}
|
||||
* SYSCLK <= 216 MHz
|
||||
*
|
||||
* USB OTG FS, SDMMC and RNG Clock = PLL_VCO / PLLQ
|
||||
* Subject to
|
||||
* The USB OTG FS requires a 48 MHz clock to work correctly. The SDMMC
|
||||
* and the random number generator need a frequency lower than or equal
|
||||
* to 48 MHz to work correctly.
|
||||
*
|
||||
* 2 <= PLLQ <= 15
|
||||
*/
|
||||
|
||||
/* Highest SYSCLK with USB OTG FS clock = 48 MHz
|
||||
*
|
||||
* PLL_VCO = (24,000,000 / 12) * 216 = 432 MHz
|
||||
* SYSCLK = 432 MHz / 2 = 216 MHz
|
||||
* USB OTG FS, SDMMC and RNG Clock = 432 MHz / 9 = 48 MHz
|
||||
*/
|
||||
|
||||
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(12)
|
||||
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(216)
|
||||
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
|
||||
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(9)
|
||||
|
||||
#define STM32_VCO_FREQUENCY ((STM32_HSE_FREQUENCY / 12) * 216)
|
||||
#define STM32_SYSCLK_FREQUENCY (STM32_VCO_FREQUENCY / 2)
|
||||
#define STM32_OTGFS_FREQUENCY (STM32_VCO_FREQUENCY / 9)
|
||||
|
||||
/* Configure factors for PLLSAI clock */
|
||||
|
||||
#define CONFIG_STM32F7_PLLSAI 1
|
||||
#define STM32_RCC_PLLSAICFGR_PLLSAIN RCC_PLLSAICFGR_PLLSAIN(192)
|
||||
#define STM32_RCC_PLLSAICFGR_PLLSAIP RCC_PLLSAICFGR_PLLSAIP(8)
|
||||
#define STM32_RCC_PLLSAICFGR_PLLSAIQ RCC_PLLSAICFGR_PLLSAIQ(4)
|
||||
#define STM32_RCC_PLLSAICFGR_PLLSAIR RCC_PLLSAICFGR_PLLSAIR(2)
|
||||
|
||||
/* Configure Dedicated Clock Configuration Register */
|
||||
|
||||
#define STM32_RCC_DCKCFGR1_PLLI2SDIVQ RCC_DCKCFGR1_PLLI2SDIVQ(1)
|
||||
#define STM32_RCC_DCKCFGR1_PLLSAIDIVQ RCC_DCKCFGR1_PLLSAIDIVQ(1)
|
||||
#define STM32_RCC_DCKCFGR1_PLLSAIDIVR RCC_DCKCFGR1_PLLSAIDIVR(0)
|
||||
#define STM32_RCC_DCKCFGR1_SAI1SRC RCC_DCKCFGR1_SAI1SEL(0)
|
||||
#define STM32_RCC_DCKCFGR1_SAI2SRC RCC_DCKCFGR1_SAI2SEL(0)
|
||||
#define STM32_RCC_DCKCFGR1_TIMPRESRC 0
|
||||
#define STM32_RCC_DCKCFGR1_DFSDM1SRC 0
|
||||
#define STM32_RCC_DCKCFGR1_ADFSDM1SRC 0
|
||||
|
||||
|
||||
|
||||
/* Configure factors for PLLI2S clock */
|
||||
|
||||
#define CONFIG_STM32F7_PLLI2S 1
|
||||
#define STM32_RCC_PLLI2SCFGR_PLLI2SN RCC_PLLI2SCFGR_PLLI2SN(192)
|
||||
#define STM32_RCC_PLLI2SCFGR_PLLI2SP RCC_PLLI2SCFGR_PLLI2SP(2)
|
||||
#define STM32_RCC_PLLI2SCFGR_PLLI2SQ RCC_PLLI2SCFGR_PLLI2SQ(2)
|
||||
#define STM32_RCC_PLLI2SCFGR_PLLI2SR RCC_PLLI2SCFGR_PLLI2SR(2)
|
||||
|
||||
/* Configure Dedicated Clock Configuration Register 2 */
|
||||
|
||||
#define STM32_RCC_DCKCFGR2_USART1SRC RCC_DCKCFGR2_USART1SEL_APB
|
||||
#define STM32_RCC_DCKCFGR2_USART2SRC RCC_DCKCFGR2_USART2SEL_APB
|
||||
#define STM32_RCC_DCKCFGR2_UART4SRC RCC_DCKCFGR2_UART4SEL_APB
|
||||
#define STM32_RCC_DCKCFGR2_UART5SRC RCC_DCKCFGR2_UART5SEL_APB
|
||||
#define STM32_RCC_DCKCFGR2_USART6SRC RCC_DCKCFGR2_USART6SEL_APB
|
||||
#define STM32_RCC_DCKCFGR2_UART7SRC RCC_DCKCFGR2_UART7SEL_APB
|
||||
#define STM32_RCC_DCKCFGR2_UART8SRC RCC_DCKCFGR2_UART8SEL_APB
|
||||
#define STM32_RCC_DCKCFGR2_I2C1SRC RCC_DCKCFGR2_I2C1SEL_HSI
|
||||
#define STM32_RCC_DCKCFGR2_I2C2SRC RCC_DCKCFGR2_I2C2SEL_HSI
|
||||
#define STM32_RCC_DCKCFGR2_I2C3SRC RCC_DCKCFGR2_I2C3SEL_HSI
|
||||
#define STM32_RCC_DCKCFGR2_I2C4SRC RCC_DCKCFGR2_I2C4SEL_HSI
|
||||
#define STM32_RCC_DCKCFGR2_LPTIM1SRC RCC_DCKCFGR2_LPTIM1SEL_APB
|
||||
#define STM32_RCC_DCKCFGR2_CECSRC RCC_DCKCFGR2_CECSEL_HSI
|
||||
#define STM32_RCC_DCKCFGR2_CK48MSRC RCC_DCKCFGR2_CK48MSEL_PLL
|
||||
#define STM32_RCC_DCKCFGR2_SDMMCSRC RCC_DCKCFGR2_SDMMCSEL_48MHZ
|
||||
#define STM32_RCC_DCKCFGR2_SDMMC2SRC RCC_DCKCFGR2_SDMMC2SEL_48MHZ
|
||||
#define STM32_RCC_DCKCFGR2_DSISRC RCC_DCKCFGR2_DSISEL_PHY
|
||||
|
||||
|
||||
/* Several prescalers allow the configuration of the two AHB buses, the
|
||||
* high-speed APB (APB2) and the low-speed APB (APB1) domains. The maximum
|
||||
* frequency of the two AHB buses is 216 MHz while the maximum frequency of
|
||||
* the high-speed APB domains is 108 MHz. The maximum allowed frequency of
|
||||
* the low-speed APB domain is 54 MHz.
|
||||
*/
|
||||
|
||||
/* AHB clock (HCLK) is SYSCLK (216 MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
||||
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
|
||||
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
|
||||
|
||||
/* APB1 clock (PCLK1) is HCLK/4 (54 MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
|
||||
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
|
||||
|
||||
/* Timers driven from APB1 will be twice PCLK1 */
|
||||
|
||||
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
|
||||
/* APB2 clock (PCLK2) is HCLK/2 (108MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
|
||||
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
||||
|
||||
/* Timers driven from APB2 will be twice PCLK2 */
|
||||
|
||||
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
|
||||
/* SDMMC dividers. Note that slower clocking is required when DMA is disabled
|
||||
* in order to avoid RX overrun/TX underrun errors due to delayed responses
|
||||
* to service FIFOs in interrupt driven mode. These values have not been
|
||||
* tuned!!!
|
||||
*
|
||||
* SDMMCCLK=48MHz, SDMMC_CK=SDMMCCLK/(118+2)=400 KHz
|
||||
*/
|
||||
|
||||
/* Use the Falling edge of the SDIO_CLK clock to change the edge the
|
||||
* data and commands are change on
|
||||
*/
|
||||
|
||||
#define STM32_SDMMC_CLKCR_EDGE STM32_SDMMC_CLKCR_NEGEDGE
|
||||
|
||||
#define STM32_SDMMC_INIT_CLKDIV (118 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
|
||||
|
||||
/* DMA ON: SDMMCCLK=48MHz, SDMMC_CK=SDMMCCLK/(1+2)=16 MHz
|
||||
* DMA OFF: SDMMCCLK=48MHz, SDMMC_CK=SDMMCCLK/(2+2)=12 MHz
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_STM32F7_SDMMC_DMA
|
||||
# define STM32_SDMMC_MMCXFR_CLKDIV (1 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
|
||||
#else
|
||||
# define STM32_SDMMC_MMCXFR_CLKDIV (2 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
|
||||
#endif
|
||||
|
||||
/* DMA ON: SDMMCCLK=48MHz, SDMMC_CK=SDMMCCLK/(1+2)=16 MHz
|
||||
* DMA OFF: SDMMCCLK=48MHz, SDMMC_CK=SDMMCCLK/(2+2)=12 MHz
|
||||
*/
|
||||
//TODO #warning "Check Freq for 24mHz"
|
||||
|
||||
#ifdef CONFIG_STM32F7_SDMMC_DMA
|
||||
# define STM32_SDMMC_SDXFR_CLKDIV (1 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
|
||||
#else
|
||||
# define STM32_SDMMC_SDXFR_CLKDIV (2 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
|
||||
#endif
|
||||
|
||||
/* FLASH wait states
|
||||
*
|
||||
* --------- ---------- -----------
|
||||
* VDD MAX SYSCLK WAIT STATES
|
||||
* --------- ---------- -----------
|
||||
* 1.7-2.1 V 180 MHz 8
|
||||
* 2.1-2.4 V 216 MHz 9
|
||||
* 2.4-2.7 V 216 MHz 8
|
||||
* 2.7-3.6 V 216 MHz 7
|
||||
* --------- ---------- -----------
|
||||
*/
|
||||
|
||||
#define BOARD_FLASH_WAITSTATES 7
|
||||
|
||||
/* Alternate function pin selections ************************************************/
|
||||
|
||||
#define GPIO_USART1_RX GPIO_USART1_RX_2 /* PB7 */
|
||||
#define GPIO_USART1_TX GPIO_USART1_TX_2 /* PB6 */
|
||||
|
||||
#define GPIO_USART2_RX GPIO_USART2_RX_2 /* PD6 */
|
||||
#define GPIO_USART2_TX GPIO_USART2_TX_2 /* PD5 */
|
||||
#define GPIO_USART2_RTS GPIO_USART2_RTS_2 /* PD4 */
|
||||
#define GPIO_USART2_CTS GPIO_USART2_CTS_2 /* PD3 */
|
||||
|
||||
#define GPIO_USART3_RX GPIO_USART3_RX_3 /* PD9 */
|
||||
#define GPIO_USART3_TX GPIO_USART3_TX_3 /* PD8 */
|
||||
#define GPIO_USART3_RTS GPIO_USART3_RTS_2 /* PD12 */
|
||||
#define GPIO_USART3_CTS GPIO_USART3_CTS_2 /* PD11 */
|
||||
|
||||
#define GPIO_UART4_RX GPIO_UART4_RX_1 /* PA1 */
|
||||
#define GPIO_UART4_TX GPIO_UART4_TX_1 /* PA0 */
|
||||
|
||||
#define GPIO_USART6_RX GPIO_USART6_RX_1 /* PC7 */
|
||||
#define GPIO_USART6_TX GPIO_USART6_TX_1 /* PC6 */
|
||||
|
||||
#define GPIO_UART7_RX GPIO_UART7_RX_1 /* PE7 */
|
||||
#define GPIO_UART7_TX GPIO_UART7_TX_1 /* PE8 */
|
||||
|
||||
/* USART8: has no remap
|
||||
*
|
||||
* GPIO_UART8_RX PE0[CN12-64]
|
||||
* GPIO_UART8_TX PE1[CN11-61]
|
||||
*/
|
||||
|
||||
/* CAN
|
||||
*
|
||||
* CAN1 is routed to transceiver.
|
||||
* CAN2 is routed to transceiver.
|
||||
*/
|
||||
#define GPIO_CAN1_RX GPIO_CAN1_RX_3 /* PD0 */
|
||||
#define GPIO_CAN1_TX GPIO_CAN1_TX_3 /* PD1 */
|
||||
#define GPIO_CAN2_RX GPIO_CAN2_RX_1 /* PB12 */
|
||||
#define GPIO_CAN2_TX GPIO_CAN2_TX_2 /* PB6 */
|
||||
|
||||
/* SPI
|
||||
*
|
||||
* SPI1 sensors
|
||||
* SPI2 is FRAM
|
||||
* SPI4 sesnors
|
||||
*/
|
||||
|
||||
#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1 /* PA6 */
|
||||
#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1 /* PA7 */
|
||||
#define GPIO_SPI1_SCK GPIO_SPI1_SCK_1 /* PA5 */
|
||||
|
||||
#define GPIO_SPI2_MISO GPIO_SPI2_MISO_1 /* PB14 */
|
||||
#define GPIO_SPI2_MOSI GPIO_SPI2_MOSI_1 /* PB15 */
|
||||
#define GPIO_SPI2_SCK GPIO_SPI2_SCK_3 /* PB13 */
|
||||
|
||||
#define GPIO_SPI4_MISO GPIO_SPI4_MISO_1 /* PE5 */
|
||||
#define GPIO_SPI4_MOSI GPIO_SPI4_MOSI_1 /* PE6 */
|
||||
#define GPIO_SPI4_SCK GPIO_SPI4_SCK_1 /* PE2 */
|
||||
|
||||
/* I2C
|
||||
*
|
||||
* I2C1_SCL PB8
|
||||
* I2C1_SDA PB9
|
||||
* I2C2_SCL PB10
|
||||
* I2C2_SDA PB11
|
||||
*/
|
||||
|
||||
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2 /* PB8 */
|
||||
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2 /* PB9 */
|
||||
|
||||
#define GPIO_I2C1_SCL_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN8)
|
||||
#define GPIO_I2C1_SDA_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN9)
|
||||
|
||||
#define GPIO_I2C2_SCL GPIO_I2C2_SCL_1 /* PB10 */
|
||||
#define GPIO_I2C2_SDA GPIO_I2C2_SDA_1 /* PB11 */
|
||||
|
||||
#define GPIO_I2C2_SCL_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN10)
|
||||
#define GPIO_I2C2_SDA_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN11)
|
||||
|
||||
/* SDMMC1
|
||||
*
|
||||
* VDD 3.3
|
||||
* GND
|
||||
* SDMMC1_CK PC12
|
||||
* SDMMC1_CMD PD2
|
||||
* SDMMC1_D0 PC8
|
||||
* SDMMC1_D1 PC9
|
||||
* SDMMC1_D2 PC10
|
||||
* SDMMC1_D3 PC11
|
||||
*/
|
||||
|
||||
/* USB
|
||||
*
|
||||
* OTG_FS_DM PA11
|
||||
* OTG_FS_DP PA12
|
||||
* VBUS PA9
|
||||
*/
|
||||
|
||||
|
||||
/* Board provides GPIO or other Hardware for signaling to timing analyzer */
|
||||
|
||||
#if defined(CONFIG_BOARD_USE_PROBES)
|
||||
# include "stm32_gpio.h"
|
||||
# define PROBE_N(n) (1<<((n)-1))
|
||||
# define PROBE_1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN14) /* PE14 AUX1 */
|
||||
# define PROBE_2 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN13) /* PE13 AUX2 */
|
||||
# define PROBE_3 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN11) /* PE11 AUX3 */
|
||||
# define PROBE_4 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN9) /* PE9 AUX4 */
|
||||
# define PROBE_5 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN13) /* PD13 AUX5 */
|
||||
# define PROBE_6 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN14) /* PD14 AUX6 */
|
||||
|
||||
# define PROBE_INIT(mask) \
|
||||
do { \
|
||||
if ((mask)& PROBE_N(1)) { stm32_configgpio(PROBE_1); } \
|
||||
if ((mask)& PROBE_N(2)) { stm32_configgpio(PROBE_2); } \
|
||||
if ((mask)& PROBE_N(3)) { stm32_configgpio(PROBE_3); } \
|
||||
if ((mask)& PROBE_N(4)) { stm32_configgpio(PROBE_4); } \
|
||||
if ((mask)& PROBE_N(5)) { stm32_configgpio(PROBE_5); } \
|
||||
if ((mask)& PROBE_N(6)) { stm32_configgpio(PROBE_6); } \
|
||||
} while(0)
|
||||
|
||||
# define PROBE(n,s) do {stm32_gpiowrite(PROBE_##n,(s));}while(0)
|
||||
# define PROBE_MARK(n) PROBE(n,false);PROBE(n,true)
|
||||
#else
|
||||
# define PROBE_INIT(mask)
|
||||
# define PROBE(n,s)
|
||||
# define PROBE_MARK(n)
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
#define EXTERN extern "C"
|
||||
extern "C"
|
||||
{
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Function Prototypes
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the initialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void stm32_boardinitialize(void);
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /*__NUTTX_CONFIG_HEX_CUBE_YELLOW_INCLUDE_BOARD_H */
|
||||
@@ -0,0 +1,99 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2020 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#pragma once
|
||||
|
||||
/*
|
||||
| DMA1 | Stream 0 | Stream 1 | Stream 2 | Stream 3 | Stream 4 | Stream 5 | Stream 6 | Stream 7 |
|
||||
|------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|
|
||||
| Channel 0 | SPI3_RX_1 | SPDIFRX_DT | SPI3_RX_2 | SPI2_RX | SPI2_TX | SPI3_TX_1 | SPDIFRX_CS | SPI3_TX_2 |
|
||||
| Channel 1 | I2C1_RX | I2C3_RX | TIM7_UP_1 | - | TIM7_UP_2 | I2C1_RX_1 | I2C1_TX | I2C1_TX_1 |
|
||||
| Channel 2 | TIM4_CH1 | - | I2C4_RX | TIM4_CH2 | - | I2C4_RX | TIM4_UP | TIM4_CH3 |
|
||||
| Channel 3 | - | TIM2_UP_1 | I2C3_RX_1 | - | I2C3_TX | TIM2_CH1 | TIM2_CH2 | TIM2_UP_2 |
|
||||
| | | TIM2_CH3 | | | | | TIM2_CH4_1 | TIM2_CH4_2 |
|
||||
| Channel 4 | UART5_RX | USART3_RX | UART4_RX | USART3_TX_1 | UART4_TX | USART2_RX | USART2_TX | UART5_TX |
|
||||
| Channel 5 | UART8_TX | UART7_TX | TIM3_CH4 | UART7_RX | TIM3_CH1 | TIM3_CH2 | UART8_RX | TIM3_CH3 |
|
||||
| | | | TIM3_UP | | TIM3_TRIG | | | |
|
||||
| Channel 6 | TIM5_CH3 | TIM5_CH4_1 | TIM5_CH1 | TIM5_CH4_2 | TIM5_CH2 | - | TIM5_UP_2 | - |
|
||||
| | TIM5_UP_1 | TIM5_TRIG_1 | | TIM5_TRIG_2 | | | | |
|
||||
| Channel 7 | - | TIM6_UP | I2C2_RX | I2C2_RX_1 | USART3_TX_2 | DAC1 | DAC2 | I2C2_TX |
|
||||
| Channel 8 | I2C3_TX | I2C4_RX | - | - | I2C2_TX | - | I2C4_TX | - |
|
||||
| Channel 9 | - | SPI2_RX | - | - | - | - | SPI2_TX | - |
|
||||
| | | | | | | | | |
|
||||
| Usage | UART8_TX | USART3_RX | UART4_RX | USART3_TX_1 | | USART2_RX | UART8_RX | |
|
||||
|
||||
|
||||
| DMA2 | Stream 0 | Stream 1 | Stream 2 | Stream 3 | Stream 4 | Stream 5 | Stream 6 | Stream 7 |
|
||||
|------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|
|
||||
| Channel 0 | ADC1_1 | SAI1_A | TIM8_CH1_1 | SAI1_A_1 | ADC1_2 | SAI1_B_1 | TIM1_CH1_1 | SAI2_B_2 |
|
||||
| | | | TIM8_CH2_1 | | | | TIM1_CH2_1 | |
|
||||
| | | | TIM8_CH3_1 | | | | TIM1_CH3_1 | |
|
||||
| Channel 1 | - | DCMI_1 | ADC2_1 | ADC2_2 | SAI1_B | SPI6_TX | SPI6_RX | DCMI_2 |
|
||||
| Channel 2 | ADC3_1 | ADC3_2 | - | SPI5_RX_1 | SPI5_TX_1 | CRYP_OUT | CRYP_IN | HASH_IN |
|
||||
| Channel 3 | SPI1_RX_1 | - | SPI1_RX_2 | SPI1_TX_1 | SAI2_A | SPI1_TX_2 | SAI2_B | QUADSPI |
|
||||
| Channel 4 | SPI4_RX_1 | SPI4_TX_1 | USART1_RX_1 | SDMMC1_1 | - | USART1_RX_2 | SDMMC1_2 | USART1_TX |
|
||||
| Channel 5 | - | USART6_RX_1 | USART6_RX_2 | SPI4_RX_2 | SPI4_TX_2 | - | USART6_TX_1 | USART6_TX_2 |
|
||||
| Channel 6 | TIM1_TRIG_1 | TIM1_CH1_2 | TIM1_CH2_2 | TIM1_CH1 | TIM1_CH4 | TIM1_UP | TIM1_CH3_2 | - |
|
||||
| | | | | | TIM1_TRIG_2 | | | |
|
||||
| | | | | | TIM1_COM | | | |
|
||||
| Channel 7 | - | TIM8_UP | TIM8_CH1_2 | TIM8_CH2_2 | TIM8_CH3_2 | SPI5_RX_2 | SPI5_TX_2 | TIM8_CH4 |
|
||||
| | | | | | | | | TIM8_TRIG |
|
||||
| | | | | | | | | TIM8_COM |
|
||||
| Channel 8 | DSFDM1_FLT0 | DSFDM1_FLT1 | DSFDM1_FLT2 | DSFDM1_FLT3 | DSFDM1_FLT0 | DSFDM1_FLT1 | DSFDM1_FLT2 | DSFDM1_FLT3 |
|
||||
| Channel 9 | JPEG_IN | JPEG_OUT | SPI4_TX | JPEG_IN | JPEG_OUT | SPI5_RX | - | - |
|
||||
| Channel 10 | SAI1_B | SAI2_B | SAI2_A | - | - | - | SAI1_A | - |
|
||||
| Channel 11 | SDMMC2 | - | QUADSPI | - | - | SDMMC2 | - | - |
|
||||
| | | | | | | | | |
|
||||
| Usage | SPI1_RX_1 | | USART6_RX_2 | SPI1_TX_1 | | TIM1_UP | SDMMC1_2 | USART6_TX_2 |
|
||||
*/
|
||||
|
||||
// DMA1 Channel/Stream Selections
|
||||
//--------------------------------------------//---------------------------//----------------
|
||||
// DMAMAP_UART8_TX // DMA1, Stream 0, Channel 5
|
||||
// DMAMAP_USART3_RX // DMA1, Stream 1, Channel 4
|
||||
// DMAMAP_UART4_RX // DMA1, Stream 2, Channel 4
|
||||
// DMAMAP_USART3_TX DMAMAP_USART3_TX_1 // DMA1, Stream 3, Channel 4
|
||||
// DMAMAP_USART2_RX // DMA1, Stream 5, Channel 4
|
||||
// DMAMAP_UART8_RX // DMA1, Stream 6, Channel 5
|
||||
|
||||
|
||||
// DMA2 Channel/Stream Selections
|
||||
//--------------------------------------------//---------------------------//----------------
|
||||
#define DMAMAP_SPI1_RX DMAMAP_SPI1_RX_1 // DMA2, Stream 0, Channel 3 (MS5611, ICM20649)
|
||||
#define DMAMAP_SPI4_TX DMAMAP_SPI4_TX_1 // DMA2, Stream 1, Channel 4 (MS5611, ICM20602, ICM20948)
|
||||
#define DMAMAP_USART6_RX DMAMAP_USART6_RX_2 // DMA2, Stream 2, Channel 5 (PX4_IO RX)
|
||||
#define DMAMAP_SPI4_RX DMAMAP_SPI4_RX_2 // DMA2, Stream 3, Channel 3 (MS5611, ICM20602, ICM20948)
|
||||
// AVAILABLE // DMA2, Stream 4
|
||||
#define DMAMAP_SPI1_TX DMAMAP_SPI1_TX_2 // DMA2, Stream 5, Channel 3 (MS5611, ICM20649)
|
||||
#define DMAMAP_SDMMC1 DMAMAP_SDMMC1_2 // DMA2, Stream 6, Channel 4 (SDMMC)
|
||||
#define DMAMAP_USART6_TX DMAMAP_USART6_TX_2 // DMA2, Stream 7, Channel 5 (PX4_IO TX)
|
||||
Reference in New Issue
Block a user