mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-07-01 16:20:35 +08:00
Adding esc35-v1 board and bootloader
This commit is contained in:
David Sidrane
committed by
Lorenz Meier
Lorenz Meier
parent
d09cd77777
commit
cd8b759fed
@@ -0,0 +1,78 @@
|
||||
############################################################################
|
||||
#
|
||||
# Copyright (c) 2016 PX4 Development Team. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name PX4 nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
message(WARNING-"Configuraton is incomplete")
|
||||
message(WARNING-"Configuraton is incomplete")
|
||||
message(WARNING-"Configuraton is incomplete")
|
||||
message(WARNING-"Configuraton is incomplete")
|
||||
message(WARNING-"Configuraton is incomplete")
|
||||
message(WARNING-"DO NOT RUN THIS ON HW")
|
||||
message(WARNING-"IT IS NOT PINED OUT TO HW")
|
||||
message(WARNING-"Configuraton is incomplete")
|
||||
message(WARNING-"Configuraton is incomplete")
|
||||
message(WARNING-"Configuraton is incomplete")
|
||||
|
||||
include_directories(../../bootloaders/include)
|
||||
|
||||
set(SRCS)
|
||||
list(APPEND SRCS
|
||||
../common/board_name.c
|
||||
esc35_init.c
|
||||
esc35_led.c
|
||||
esc35_usb.c
|
||||
../../../drivers/bootloaders/src/common/boot_app_shared.c
|
||||
../../../drivers/bootloaders/src/util/crc.c
|
||||
)
|
||||
|
||||
if(${OS} STREQUAL "nuttx")
|
||||
if (NOT ${BOARD} STREQUAL "sim")
|
||||
list(APPEND SRCS
|
||||
../../../drivers/device/device_nuttx.cpp
|
||||
../../../drivers/device/cdev.cpp
|
||||
)
|
||||
endif()
|
||||
else()
|
||||
list(APPEND SRCS
|
||||
../../../drivers/device/device_posix.cpp
|
||||
../../../drivers/device/vdev.cpp
|
||||
)
|
||||
endif()
|
||||
|
||||
px4_add_module(
|
||||
MODULE drivers__boards__esc35-v1
|
||||
COMPILE_FLAGS
|
||||
-Os
|
||||
SRCS ${SRCS}
|
||||
DEPENDS
|
||||
platforms__common
|
||||
)
|
||||
@@ -0,0 +1,282 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2012-2016 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file board_config.h
|
||||
*
|
||||
* ESC35v1 internal definitions
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
/****************************************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************************************/
|
||||
|
||||
#include <px4_config.h>
|
||||
#include <nuttx/compiler.h>
|
||||
#include <stdint.h>
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
#if STM32_NSPI < 1
|
||||
# undef CONFIG_STM32_SPI1
|
||||
# undef CONFIG_STM32_SPI2
|
||||
#elif STM32_NSPI < 2
|
||||
# undef CONFIG_STM32_SPI2
|
||||
#endif
|
||||
|
||||
/* High-resolution timer
|
||||
*/
|
||||
#define HRT_TIMER 3 /* use timer1 for the HRT */
|
||||
#define HRT_TIMER_CHANNEL 1 /* use capture/compare channel */
|
||||
|
||||
/* GPIO ***********************************************************************
|
||||
*
|
||||
* GPIO Function MPU Board
|
||||
* Pin # Name
|
||||
* -- ----- -------------------------------- ----------------------
|
||||
*
|
||||
* PB[6] PB06 42 nCAN_SILENT
|
||||
*/
|
||||
|
||||
#define GPIO_CAN_SILENT (GPIO_OUTPUT | GPIO_PUSHPULL | \
|
||||
GPIO_PORTB | GPIO_PIN6 | GPIO_OUTPUT_CLEAR)
|
||||
|
||||
#define GPIO_RC_PWM (GPIO_INPUT | GPIO_PULLUP | GPIO_PORTA | GPIO_PIN0)
|
||||
|
||||
#define GPIO_OC_ADJ (GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_50MHz | \
|
||||
GPIO_PORTA | GPIO_PIN4 | GPIO_OUTPUT_CLEAR)
|
||||
#define GPIO_EN_GATE (GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_50MHz | \
|
||||
GPIO_PORTA | GPIO_PIN5 | GPIO_OUTPUT_CLEAR)
|
||||
#define GPIO_DC_CAL (GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_50MHz | \
|
||||
GPIO_PORTA | GPIO_PIN6 | GPIO_OUTPUT_CLEAR)
|
||||
|
||||
|
||||
/* CAN ************************************************************************ *
|
||||
*
|
||||
* GPIO Function MPU Board
|
||||
* Pin # Name
|
||||
* -- ----- -------------------------------- ------------------------
|
||||
*
|
||||
* PB[8] PB8/CAN_RX 45 CAN_RX
|
||||
* PB[9] PB9/CAN_TX 46 CAN_TX
|
||||
*
|
||||
*/
|
||||
#define GPIO_CAN1_RX GPIO_CAN_RX_3
|
||||
#define GPIO_CAN1_TX GPIO_CAN_TX_3
|
||||
|
||||
/* Analog ***********************************************************************
|
||||
*
|
||||
* GPIO Function MPU Board
|
||||
* Pin # Name
|
||||
* -- ----- -------------------------------- ----------------------
|
||||
*
|
||||
* PC[00] PC0/ADC123_IN10 8 TEMP_SENS
|
||||
* PC[01] PC1/ADC123_IN11/SPI3_MOSI/SPI2_MOSI 9 VBAT_SENS
|
||||
* PC[02] PC2/ADC123_IN12/SPI2_MISO, 10 CURR_SENS2
|
||||
* PC[03] PC3/ADC123_IN13/SPI2_MOSI 11 CURR_SENS1
|
||||
*
|
||||
*/
|
||||
|
||||
/* LEDs ***********************************************************************
|
||||
*
|
||||
* GPIO Function MPU Board
|
||||
* Pin # Name
|
||||
* -- ----- -------------------------------- ----------------------
|
||||
*
|
||||
* PC[07] PC7/TIM3_CH2/TIM8_CH2 38 LED_RED
|
||||
* PC[08] PC8/TIM3_CH3/TIM8_CH3 39 LED_GREEN
|
||||
* PC[09] PC9/TIM3_CH4/TIM8_CH4 40 LED_BLUE
|
||||
*/
|
||||
|
||||
#define GPIO_LED1 (GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_50MHz | \
|
||||
GPIO_PORTA | GPIO_PIN2 | GPIO_OUTPUT_CLEAR)
|
||||
#define GPIO_LED_RED GPIO_LED1
|
||||
|
||||
#define GPIO_LED2 (GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_50MHz | \
|
||||
GPIO_PORTA | GPIO_PIN3 | GPIO_OUTPUT_CLEAR)
|
||||
#define GPIO_LED_GREEN GPIO_LED2
|
||||
|
||||
#define GPIO_LED3 (GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_50MHz | \
|
||||
GPIO_PORTA | GPIO_PIN1 | GPIO_OUTPUT_CLEAR)
|
||||
#define GPIO_LED_BLUE GPIO_LED3
|
||||
|
||||
#define BOARD_NAME "ESC35_V1"
|
||||
|
||||
__BEGIN_DECLS
|
||||
|
||||
/************************************************************************************
|
||||
* Public Types
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public data
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || \
|
||||
defined(CONFIG_STM32_SPI3)
|
||||
void weak_function board_spiinitialize(void);
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_usbinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to setup USB-related GPIO pins.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void stm32_usbinitialize(void);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_usb_set_pwr_callback()
|
||||
*
|
||||
* Description:
|
||||
* Called to setup set a call back for USB power state changes.
|
||||
*
|
||||
* Inputs:
|
||||
* pwr_changed_handler: An interrupt handler that will be called on VBUS power
|
||||
* state changes.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void stm32_usb_set_pwr_callback(xcpt_t pwr_changed_handler);
|
||||
|
||||
|
||||
/****************************************************************************
|
||||
* Name: stm32_led_initialize
|
||||
*
|
||||
* Description:
|
||||
* This functions is called very early in initialization to perform board-
|
||||
* specific initialization of LED-related resources. This includes such
|
||||
* things as, for example, configure GPIO pins to drive the LEDs and also
|
||||
* putting the LEDs in their correct initial state.
|
||||
*
|
||||
* NOTE: In most architectures, LED initialization() is called from
|
||||
* board-specific initialization and should, therefore, have the name
|
||||
* <arch>_led_intialize(). But there are a few architectures where the
|
||||
* LED initialization function is still called from common chip
|
||||
* architecture logic. This interface is not, however, a common board
|
||||
* interface in any event and the name board_autoled_initialization is
|
||||
* deprecated.
|
||||
*
|
||||
* Input Parameters:
|
||||
* None
|
||||
*
|
||||
* Returned Value:
|
||||
* None
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
void board_autoled_initialize(void);
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_can_initialize
|
||||
*
|
||||
* Description:
|
||||
* Called at application startup time to initialize the CAN functionality.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#if defined(CONFIG_CAN) && (defined(CONFIG_STM32_CAN1) || defined(CONFIG_STM32_CAN2))
|
||||
int board_can_initialize(void);
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Name: board_button_initialize
|
||||
*
|
||||
* Description:
|
||||
* Called at application startup time to initialize the Buttons functionality.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#if defined(CONFIG_ARCH_BUTTONS)
|
||||
void board_button_initialize(void);
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Name: usbmsc_archinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called from the application system/usbmc or the boards_nsh if the
|
||||
* application is not included.
|
||||
* Perform architecture specific initialization. This function must
|
||||
* configure the block device to export via USB. This function must be
|
||||
* provided by architecture-specific logic in order to use this add-on.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#if !defined(CONFIG_NSH_BUILTIN_APPS) && !defined(CONFIG_SYSTEM_USBMSC)
|
||||
int usbmsc_archinitialize(void);
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Name: composite_archinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called from the application system/composite or the boards_nsh if the
|
||||
* application is not included.
|
||||
* Perform architecture specific initialization. This function must
|
||||
* configure the block device to export via USB. This function must be
|
||||
* provided by architecture-specific logic in order to use this add-on.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#if !defined(CONFIG_NSH_BUILTIN_APPS) && !defined(CONFIG_SYSTEM_COMPOSITE)
|
||||
extern int composite_archinitialize(void);
|
||||
#endif
|
||||
|
||||
#include "../common/board_common.h"
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
|
||||
__END_DECLS
|
||||
@@ -0,0 +1,65 @@
|
||||
############################################################################
|
||||
#
|
||||
# Copyright (c) 2016 PX4 Development Team. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name PX4 nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
|
||||
add_definitions(
|
||||
-DHW_UAVCAN_NAME=${uavcanblid_name}
|
||||
-DHW_VERSION_MAJOR=${uavcanblid_hw_version_major}
|
||||
-DHW_VERSION_MINOR=${uavcanblid_hw_version_minor}
|
||||
)
|
||||
|
||||
include_directories(${px4_bootloader_base}include)
|
||||
include_directories(${px4_module_base}systemlib)
|
||||
include_directories(.)
|
||||
|
||||
px4_add_module(
|
||||
MODULE drivers__boards__esc35-v1__bootloader
|
||||
COMPILE_FLAGS
|
||||
-Os
|
||||
SRCS
|
||||
boot.c
|
||||
led.c
|
||||
${px4_bootloader_base}src/uavcan/main.c
|
||||
${px4_bootloader_base}src/common/boot_app_shared.c
|
||||
${px4_bootloader_base}src/sched/timer.c
|
||||
${px4_bootloader_base}src/fs/flash.c
|
||||
${px4_bootloader_base}src/util/crc.c
|
||||
${px4_bootloader_base}src/util/random.c
|
||||
${px4_bootloader_base}src/arch/stm32/drivers/can/driver.c
|
||||
${px4_bootloader_base}src/protocol/uavcan.c
|
||||
DEPENDS
|
||||
nuttx_export_${BOARD}
|
||||
)
|
||||
|
||||
|
||||
# vim: set noet ft=cmake fenc=utf-8 ff=unix :
|
||||
@@ -0,0 +1,226 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2016 PX4 Development Team. All rights reserved.
|
||||
* Author: Ben Dyer <ben_dyer@mac.com>
|
||||
* Pavel Kirienko <pavel.kirienko@zubax.com>
|
||||
* David Sidrane <david_s5@nscdg.com>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <px4_config.h>
|
||||
#include <stdint.h>
|
||||
#include "boot_config.h"
|
||||
#include "board.h"
|
||||
|
||||
#include <debug.h>
|
||||
#include <string.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include <nuttx/board.h>
|
||||
#include "led.h"
|
||||
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Types
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Function Prototypes
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Data
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Data
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the initialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
__EXPORT void stm32_boardinitialize(void)
|
||||
{
|
||||
putreg32(getreg32(STM32_RCC_AHBENR) | RCC_AHBENR_IOPAEN |
|
||||
RCC_AHBENR_IOPBEN, STM32_RCC_AHBENR);
|
||||
putreg32(getreg32(STM32_RCC_APB1ENR) | RCC_APB1ENR_CAN1EN, STM32_RCC_APB1ENR);
|
||||
|
||||
putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST,
|
||||
STM32_RCC_APB1RSTR);
|
||||
putreg32(getreg32(STM32_RCC_APB1RSTR) & ~RCC_APB1RSTR_CAN1RST,
|
||||
STM32_RCC_APB1RSTR);
|
||||
|
||||
stm32_configgpio(GPIO_CAN1_RX);
|
||||
stm32_configgpio(GPIO_CAN1_TX);
|
||||
stm32_configgpio(GPIO_CAN_SILENT);
|
||||
|
||||
#if defined(OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO)
|
||||
stm32_configgpio(GPIO_GETNODEINFO_JUMPER);
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_boarddeinitialize
|
||||
*
|
||||
* Description:
|
||||
* This function is called by the bootloader code prior to booting
|
||||
* the application. Is should place the HW into an benign initialized state.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void stm32_boarddeinitialize(void)
|
||||
{
|
||||
|
||||
putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST,
|
||||
STM32_RCC_APB1RSTR);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_get_product_name
|
||||
*
|
||||
* Description:
|
||||
* Called to retrieve the product name. The returned value is a assumed
|
||||
* to be written to a pascal style string that will be length prefixed
|
||||
* and not null terminated
|
||||
*
|
||||
* Input Parameters:
|
||||
* product_name - A pointer to a buffer to write the name.
|
||||
* maxlen - The maximum number of charter that can be written
|
||||
*
|
||||
* Returned Value:
|
||||
* The length of characters written to the buffer.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
uint8_t board_get_product_name(uint8_t *product_name, size_t maxlen)
|
||||
{
|
||||
DEBUGASSERT(maxlen > UAVCAN_STRLEN(HW_UAVCAN_NAME));
|
||||
memcpy(product_name, HW_UAVCAN_NAME, UAVCAN_STRLEN(HW_UAVCAN_NAME));
|
||||
return UAVCAN_STRLEN(HW_UAVCAN_NAME);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_get_hardware_version
|
||||
*
|
||||
* Description:
|
||||
* Called to retrieve the hardware version information. The function
|
||||
* will first initialize the the callers struct to all zeros.
|
||||
*
|
||||
* Input Parameters:
|
||||
* hw_version - A pointer to a uavcan_hardwareversion_t.
|
||||
*
|
||||
* Returned Value:
|
||||
* Length of the unique_id
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
size_t board_get_hardware_version(uavcan_HardwareVersion_t *hw_version)
|
||||
{
|
||||
size_t length = 12;
|
||||
memset(hw_version, 0 , sizeof(uavcan_HardwareVersion_t));
|
||||
|
||||
hw_version->major = HW_VERSION_MAJOR;
|
||||
hw_version->minor = HW_VERSION_MINOR;
|
||||
|
||||
memcpy(hw_version->unique_id, (void *) STM32_SYSMEM_UID, length);
|
||||
return length;
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_indicate
|
||||
*
|
||||
* Description:
|
||||
* Provides User feedback to indicate the state of the bootloader
|
||||
* on board specific hardware.
|
||||
*
|
||||
* Input Parameters:
|
||||
* indication - A member of the uiindication_t
|
||||
*
|
||||
* Returned Value:
|
||||
* None
|
||||
*
|
||||
****************************************************************************/
|
||||
#define led(n, code, r , g , b, h) {.red = (r),.green = (g), .blue = (b),.hz = (h)}
|
||||
|
||||
typedef struct packed_struct led_t {
|
||||
uint16_t red : 5;
|
||||
uint16_t green : 6;
|
||||
uint16_t blue : 5;
|
||||
uint8_t hz;
|
||||
} led_t;
|
||||
|
||||
static const led_t i2l[] = {
|
||||
|
||||
led(0, off, 0, 0, 0, 0),
|
||||
led(1, reset, 10, 63, 31, 255),
|
||||
led(2, autobaud_start, 0, 63, 0, 1),
|
||||
led(3, autobaud_end, 0, 63, 0, 2),
|
||||
led(4, allocation_start, 0, 0, 31, 2),
|
||||
led(5, allocation_end, 0, 63, 31, 3),
|
||||
led(6, fw_update_start, 15, 63, 31, 3),
|
||||
led(7, fw_update_erase_fail, 15, 63, 15, 3),
|
||||
led(8, fw_update_invalid_response, 31, 0, 0, 1),
|
||||
led(9, fw_update_timeout, 31, 0, 0, 2),
|
||||
led(a, fw_update_invalid_crc, 31, 0, 0, 4),
|
||||
led(b, jump_to_app, 0, 63, 0, 10),
|
||||
|
||||
};
|
||||
|
||||
void board_indicate(uiindication_t indication)
|
||||
{
|
||||
rgb_led(i2l[indication].red << 3,
|
||||
i2l[indication].green << 2,
|
||||
i2l[indication].blue << 3,
|
||||
i2l[indication].hz);
|
||||
}
|
||||
@@ -0,0 +1,121 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2012-2016 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/*
|
||||
* @file boot_config.h
|
||||
*
|
||||
* bootloader definitions that configures the behavior and options
|
||||
* of the Boot loader
|
||||
* This file is relies on the parent folder's boot_config.h file and defines
|
||||
* different usages of the hardware for bootloading
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
/* Bring in the board_config.h definitions
|
||||
* todo:make this be pulled in from a targed's build
|
||||
* files in nuttx*/
|
||||
|
||||
#include "../board_config.h"
|
||||
#include "uavcan.h"
|
||||
#include <nuttx/compiler.h>
|
||||
#include <stdint.h>
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
#define OPT_PREFERRED_NODE_ID ANY_NODE_ID
|
||||
|
||||
//todo:wrap OPT_x in in ifdefs for command line definitions
|
||||
#define OPT_TBOOT_MS 5000
|
||||
#define OPT_NODE_STATUS_RATE_MS 800
|
||||
#define OPT_NODE_INFO_RATE_MS 50
|
||||
#define OPT_BL_NUMBER_TIMERS 7
|
||||
|
||||
/*
|
||||
* This Option set is set to 1 ensure a provider of firmware has an
|
||||
* opportunity update the node's firmware.
|
||||
* This Option is the default policy and can be overridden by
|
||||
* a jumper
|
||||
* When this Policy is set, the node will ignore tboot and
|
||||
* wait indefinitely for a GetNodeInfo request before booting.
|
||||
*
|
||||
* OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT is used to allow
|
||||
* the polarity of the jumper to be True Active
|
||||
*
|
||||
* wait OPT_WAIT_FOR_GETNODEINFO OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO
|
||||
* Jumper
|
||||
* yes 1 0 x
|
||||
* yes 1 1 Active
|
||||
* no 1 1 Not Active
|
||||
* no 0 0 X
|
||||
* yes 0 1 Active
|
||||
* no 0 1 Not Active
|
||||
*
|
||||
*/
|
||||
#define OPT_WAIT_FOR_GETNODEINFO 0
|
||||
#undef OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO
|
||||
#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT 0
|
||||
|
||||
#define OPT_ENABLE_WD 1
|
||||
|
||||
#define OPT_RESTART_TIMEOUT_MS 20000
|
||||
|
||||
/* Reserved for the Bootloader */
|
||||
#define OPT_BOOTLOADER_SIZE_IN_K (16 * 1024)
|
||||
|
||||
/* Reserved for the application out of the total
|
||||
* system flash minus the BOOTLOADER_SIZE_IN_K
|
||||
*/
|
||||
#define OPT_APPLICATION_RESERVER_IN_K (8 * 2048) /* Parameters will use the 8 2KiB sectors */
|
||||
|
||||
#define OPT_APPLICATION_IMAGE_OFFSET (OPT_BOOTLOADER_SIZE_IN_K + OPT_APPLICATION_RESERVER_IN_K)
|
||||
#define OPT_APPLICATION_IMAGE_LENGTH (FLASH_SIZE-(OPT_BOOTLOADER_SIZE_IN_K+OPT_APPLICATION_RESERVER_IN_K))
|
||||
|
||||
|
||||
#define FLASH_BASE STM32_FLASH_BASE
|
||||
#define FLASH_NUMBER_PAGES STM32_FLASH_NPAGES
|
||||
#define FLASH_PAGE_SIZE STM32_FLASH_PAGESIZE
|
||||
#define FLASH_SIZE (FLASH_NUMBER_PAGES * FLASH_PAGE_SIZE)
|
||||
|
||||
#define APPLICATION_LOAD_ADDRESS (FLASH_BASE + OPT_APPLICATION_IMAGE_OFFSET)
|
||||
#define APPLICATION_SIZE (FLASH_SIZE-OPT_APPLICATION_IMAGE_OFFSET)
|
||||
#define APPLICATION_LAST_8BIT_ADDRRESS ((uint8_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint8_t)))
|
||||
#define APPLICATION_LAST_32BIT_ADDRRESS ((uint32_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint32_t)))
|
||||
#define APPLICATION_LAST_64BIT_ADDRRESS ((uint64_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint64_t)))
|
||||
@@ -0,0 +1,114 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (C) 2016 PX4 Development Team. All rights reserved.
|
||||
* Author: David Sidrane<david_s5@nscdg.com>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
#include <px4_config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
#include "chip/stm32_tim.h"
|
||||
|
||||
|
||||
#include "led.h"
|
||||
#define TMR_BASE STM32_TIM2_BASE
|
||||
#define TMR_FREQUENCY STM32_APB1_TIM2_CLKIN
|
||||
#define TMR_REG(o) (TMR_BASE+(o))
|
||||
|
||||
|
||||
void rgb_led(int r, int g , int b, int freqs)
|
||||
{
|
||||
|
||||
long fosc = TMR_FREQUENCY;
|
||||
long prescale = 2048;
|
||||
long p1s = fosc / prescale;
|
||||
long p0p5s = p1s / 2;
|
||||
uint16_t val;
|
||||
static bool once = 0;
|
||||
|
||||
if (!once) {
|
||||
once = 1;
|
||||
|
||||
/* Enabel Clock to Block */
|
||||
modifyreg32(STM32_RCC_APB1ENR, 0, RCC_APB1ENR_TIM2EN);
|
||||
|
||||
/* Reload */
|
||||
|
||||
val = getreg16(TMR_REG(STM32_BTIM_EGR_OFFSET));
|
||||
val |= ATIM_EGR_UG;
|
||||
putreg16(val, TMR_REG(STM32_BTIM_EGR_OFFSET));
|
||||
|
||||
/* Set Prescaler STM32_TIM_SETCLOCK */
|
||||
|
||||
putreg16(prescale, TMR_REG(STM32_BTIM_PSC_OFFSET));
|
||||
|
||||
/* Enable STM32_TIM_SETMODE*/
|
||||
|
||||
putreg16(ATIM_CR1_CEN | ATIM_CR1_ARPE, TMR_REG(STM32_BTIM_CR1_OFFSET));
|
||||
|
||||
|
||||
putreg16((ATIM_CCMR_MODE_PWM1 << ATIM_CCMR1_OC2M_SHIFT) | ATIM_CCMR1_OC2PE, TMR_REG(STM32_GTIM_CCMR1_OFFSET));
|
||||
putreg16((ATIM_CCMR_MODE_PWM1 << ATIM_CCMR2_OC3M_SHIFT) | ATIM_CCMR2_OC3PE |
|
||||
(ATIM_CCMR_MODE_PWM1 << ATIM_CCMR2_OC4M_SHIFT) | ATIM_CCMR2_OC4PE, TMR_REG(STM32_GTIM_CCMR2_OFFSET));
|
||||
putreg16(ATIM_CCER_CC2E | ATIM_CCER_CC2P |
|
||||
ATIM_CCER_CC3E | ATIM_CCER_CC3P |
|
||||
ATIM_CCER_CC4E | ATIM_CCER_CC4P, TMR_REG(STM32_GTIM_CCER_OFFSET));
|
||||
|
||||
stm32_configgpio(GPIO_TIM2_CH2OUT);
|
||||
stm32_configgpio(GPIO_TIM2_CH3OUT);
|
||||
stm32_configgpio(GPIO_TIM2_CH4OUT);
|
||||
}
|
||||
|
||||
long p = freqs == 0 ? p1s : p1s / freqs;
|
||||
putreg32(p, TMR_REG(STM32_BTIM_ARR_OFFSET));
|
||||
|
||||
p = freqs == 0 ? p1s + 1 : p0p5s / freqs;
|
||||
|
||||
putreg32((r * p) / 255, TMR_REG(STM32_GTIM_CCR3_OFFSET));
|
||||
putreg32((g * p) / 255, TMR_REG(STM32_GTIM_CCR4_OFFSET));
|
||||
putreg32((b * p) / 255, TMR_REG(STM32_GTIM_CCR2_OFFSET));
|
||||
|
||||
val = getreg16(TMR_REG(STM32_BTIM_CR1_OFFSET));
|
||||
|
||||
if (freqs == 0) {
|
||||
val &= ~ATIM_CR1_CEN;
|
||||
|
||||
} else {
|
||||
val |= ATIM_CR1_CEN | GTIM_CR1_ARPE;
|
||||
}
|
||||
|
||||
putreg16(val, TMR_REG(STM32_BTIM_CR1_OFFSET));
|
||||
val = getreg16(TMR_REG(STM32_BTIM_EGR_OFFSET));
|
||||
val |= GTIM_EGR_UG;
|
||||
putreg16(val, TMR_REG(STM32_BTIM_EGR_OFFSET));
|
||||
}
|
||||
@@ -0,0 +1,38 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (C) 2016 PX4 Development Team. All rights reserved.
|
||||
* Author: David Sidrane<david_s5@nscdg.com>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
#include <systemlib/visibility.h>
|
||||
|
||||
__BEGIN_DECLS
|
||||
void rgb_led(int r, int g , int b, int freqs);
|
||||
__END_DECLS
|
||||
@@ -0,0 +1,221 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2012-2016 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file px4flow_init.c
|
||||
*
|
||||
* PX4ESC-specific early startup code. This file implements the
|
||||
* board_app_initialize() function that is called early by nsh during startup.
|
||||
*
|
||||
* Code here is run before the rcS script is invoked; it should start required
|
||||
* subsystems and perform board-specific initialization.
|
||||
*/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <px4_config.h>
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <stdio.h>
|
||||
#include <debug.h>
|
||||
#include <errno.h>
|
||||
|
||||
#include <nuttx/arch.h>
|
||||
#include <nuttx/board.h>
|
||||
#include <nuttx/spi/spi.h>
|
||||
#include <nuttx/i2c/i2c_master.h>
|
||||
#include <nuttx/mmcsd.h>
|
||||
#include <nuttx/analog/adc.h>
|
||||
|
||||
#include <stm32.h>
|
||||
#include "board_config.h"
|
||||
#include "stm32_uart.h"
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include <drivers/drv_hrt.h>
|
||||
#include <drivers/drv_led.h>
|
||||
|
||||
#include <systemlib/cpuload.h>
|
||||
|
||||
#if defined(CONFIG_HAVE_CXX) && defined(CONFIG_HAVE_CXXINITIALIZE)
|
||||
#include <systemlib/systemlib.h>
|
||||
#endif
|
||||
|
||||
#if defined(FLASH_BASED_PARAMS)
|
||||
# include <systemlib/flashparams/flashfs.h>
|
||||
#endif
|
||||
|
||||
#include "board_config.h"
|
||||
|
||||
/* todo: This is constant but not proper */
|
||||
__BEGIN_DECLS
|
||||
extern void led_off(int led);
|
||||
__END_DECLS
|
||||
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-Processor Definitions
|
||||
****************************************************************************/
|
||||
/* Configuration ************************************************************/
|
||||
|
||||
/* Debug ********************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Protected Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the initialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
__EXPORT void stm32_boardinitialize(void)
|
||||
{
|
||||
/* configure LEDs */
|
||||
|
||||
board_autoled_initialize();
|
||||
|
||||
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || \
|
||||
defined(CONFIG_STM32_SPI3)
|
||||
board_spiinitialize();
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
__EXPORT void board_initialize(void)
|
||||
{
|
||||
}
|
||||
|
||||
static void hrt_calls_this(void)
|
||||
{
|
||||
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_app_initialize
|
||||
*
|
||||
* Description:
|
||||
* Perform application specific initialization. This function is never
|
||||
* called directly from application code, but only indirectly via the
|
||||
* (non-standard) boardctl() interface using the command BOARDIOC_INIT.
|
||||
*
|
||||
* Input Parameters:
|
||||
* arg - The boardctl() argument is passed to the board_app_initialize()
|
||||
* implementation without modification. The argument has no
|
||||
* meaning to NuttX; the meaning of the argument is a contract
|
||||
* between the board-specific initalization logic and the the
|
||||
* matching application logic. The value cold be such things as a
|
||||
* mode enumeration value, a set of DIP switch switch settings, a
|
||||
* pointer to configuration data read from a file or serial FLASH,
|
||||
* or whatever you would like to do with it. Every implementation
|
||||
* should accept zero/NULL as a default configuration.
|
||||
*
|
||||
* Returned Value:
|
||||
* Zero (OK) is returned on success; a negated errno value is returned on
|
||||
* any failure to indicate the nature of the failure.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
__EXPORT int board_app_initialize(uintptr_t arg)
|
||||
{
|
||||
int result = OK;
|
||||
|
||||
#if defined(CONFIG_HAVE_CXX) && defined(CONFIG_HAVE_CXXINITIALIZE)
|
||||
|
||||
/* run C++ ctors before we go any further */
|
||||
|
||||
up_cxxinitialize();
|
||||
|
||||
# if defined(CONFIG_EXAMPLES_NSH_CXXINITIALIZE)
|
||||
# error CONFIG_EXAMPLES_NSH_CXXINITIALIZE Must not be defined! Use CONFIG_HAVE_CXX and CONFIG_HAVE_CXXINITIALIZE.
|
||||
# endif
|
||||
|
||||
#else
|
||||
# error platform is dependent on c++ both CONFIG_HAVE_CXX and CONFIG_HAVE_CXXINITIALIZE must be defined.
|
||||
#endif
|
||||
|
||||
/* configure the high-resolution time/callout interface */
|
||||
hrt_init();
|
||||
|
||||
/* set up the serial DMA polling */
|
||||
static struct hrt_call serial_dma_call;
|
||||
struct timespec ts;
|
||||
|
||||
/*
|
||||
* Poll at 1ms intervals for received bytes that have not triggered
|
||||
* a DMA event.
|
||||
*/
|
||||
ts.tv_sec = 0;
|
||||
ts.tv_nsec = 1000000;
|
||||
|
||||
hrt_call_every(&serial_dma_call,
|
||||
ts_to_abstime(&ts),
|
||||
ts_to_abstime(&ts),
|
||||
(hrt_callout)hrt_calls_this,
|
||||
NULL);
|
||||
|
||||
#if defined(FLASH_BASED_PARAMS)
|
||||
static sector_descriptor_t sector_map[] = {
|
||||
{1, 2 * 1024, 0x08004000},
|
||||
{2, 2 * 1024, 0x08004800},
|
||||
{3, 2 * 1024, 0x08005000},
|
||||
{4, 2 * 1024, 0x08005800},
|
||||
{5, 2 * 1024, 0x08006000},
|
||||
{6, 2 * 1024, 0x08006800},
|
||||
{7, 2 * 1024, 0x08007000},
|
||||
{8, 2 * 1024, 0x08007800},
|
||||
{0, 0, 0},
|
||||
};
|
||||
static uint8_t param_buffer[PARAMETER_BUFFER_SIZE];
|
||||
|
||||
parameter_flashfs_init(sector_map, param_buffer, sizeof(param_buffer));
|
||||
#endif
|
||||
return result;
|
||||
}
|
||||
|
||||
|
||||
__EXPORT void board_crashdump(uintptr_t currentsp, FAR void *tcb, FAR const uint8_t *filename, int lineno)
|
||||
{
|
||||
}
|
||||
@@ -0,0 +1,192 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2012-2016 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file px4esc_led.c
|
||||
*
|
||||
* PX4ESC LED backend.
|
||||
*/
|
||||
|
||||
#include <px4_config.h>
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <nuttx/board.h>
|
||||
|
||||
#include "stm32.h"
|
||||
#include "board_config.h"
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include <systemlib/px4_macros.h>
|
||||
|
||||
/*
|
||||
* Ideally we'd be able to get these from up_internal.h,
|
||||
* but since we want to be able to disable the NuttX use
|
||||
* of leds for system indication at will and there is no
|
||||
* separate switch, we need to build independent of the
|
||||
* CONFIG_ARCH_LEDS configuration switch.
|
||||
*/
|
||||
__BEGIN_DECLS
|
||||
extern void led_init(void);
|
||||
extern void led_on(int led);
|
||||
extern void led_off(int led);
|
||||
extern void led_toggle(int led);
|
||||
__END_DECLS
|
||||
|
||||
static uint32_t g_ledmap[] = {
|
||||
GPIO_LED_RED, // Indexed by BOARD_LED_RED
|
||||
GPIO_LED_GREEN, // Indexed by BOARD_LED_GREEN
|
||||
GPIO_LED_BLUE, // Indexed by BOARD_LED_BLUE
|
||||
};
|
||||
|
||||
__EXPORT void led_init(void)
|
||||
{
|
||||
/* Configure LED GPIOs for output */
|
||||
for (size_t l = 0; l < arraySize(g_ledmap); l++) {
|
||||
stm32_configgpio(g_ledmap[l]);
|
||||
}
|
||||
}
|
||||
|
||||
__EXPORT void board_autoled_initialize(void)
|
||||
{
|
||||
led_init();
|
||||
}
|
||||
|
||||
static void phy_set_led(int led, bool state)
|
||||
{
|
||||
/* Pull Down to switch on */
|
||||
stm32_gpiowrite(g_ledmap[led], !state);
|
||||
}
|
||||
|
||||
static bool phy_get_led(int led)
|
||||
{
|
||||
|
||||
return !stm32_gpioread(g_ledmap[led]);
|
||||
}
|
||||
|
||||
__EXPORT void led_on(int led)
|
||||
{
|
||||
phy_set_led(led, true);
|
||||
}
|
||||
|
||||
__EXPORT void led_off(int led)
|
||||
{
|
||||
phy_set_led(led, false);
|
||||
}
|
||||
|
||||
__EXPORT void led_toggle(int led)
|
||||
{
|
||||
|
||||
phy_set_led(led, !phy_get_led(led));
|
||||
}
|
||||
|
||||
static bool g_initialized;
|
||||
|
||||
// Nuttx Usages
|
||||
|
||||
__EXPORT
|
||||
void board_autoled_on(int led)
|
||||
{
|
||||
switch (led) {
|
||||
default:
|
||||
case LED_STARTED:
|
||||
case LED_HEAPALLOCATE:
|
||||
phy_set_led(BOARD_LED_BLUE, true);
|
||||
break;
|
||||
|
||||
case LED_IRQSENABLED:
|
||||
phy_set_led(BOARD_LED_GREEN, true);
|
||||
break;
|
||||
|
||||
case LED_STACKCREATED:
|
||||
phy_set_led(BOARD_LED_GREEN, true);
|
||||
phy_set_led(BOARD_LED_BLUE, true);
|
||||
g_initialized = true;
|
||||
break;
|
||||
|
||||
case LED_INIRQ:
|
||||
case LED_SIGNAL:
|
||||
phy_set_led(BOARD_LED_GREEN, true);
|
||||
break;
|
||||
|
||||
case LED_ASSERTION:
|
||||
phy_set_led(BOARD_LED_RED, true);
|
||||
phy_set_led(BOARD_LED_GREEN, true);
|
||||
break;
|
||||
|
||||
case LED_PANIC:
|
||||
phy_set_led(BOARD_LED_RED, true);
|
||||
break;
|
||||
|
||||
case LED_IDLE : /* IDLE */
|
||||
phy_set_led(BOARD_LED_RED, true);
|
||||
phy_set_led(BOARD_LED_BLUE, true);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_autoled_off
|
||||
****************************************************************************/
|
||||
|
||||
|
||||
__EXPORT void board_autoled_off(int led)
|
||||
{
|
||||
switch (led) {
|
||||
default:
|
||||
case LED_STARTED:
|
||||
case LED_HEAPALLOCATE:
|
||||
case LED_IRQSENABLED:
|
||||
phy_set_led(BOARD_LED_BLUE, false);
|
||||
|
||||
case LED_STACKCREATED:
|
||||
break;
|
||||
|
||||
case LED_INIRQ:
|
||||
case LED_SIGNAL:
|
||||
case LED_ASSERTION:
|
||||
phy_set_led(BOARD_LED_RED, false);
|
||||
phy_set_led(BOARD_LED_GREEN, false);
|
||||
|
||||
break;
|
||||
|
||||
case LED_PANIC:
|
||||
phy_set_led(BOARD_LED_RED, false);
|
||||
phy_set_led(BOARD_LED_GREEN, false);
|
||||
break;
|
||||
|
||||
case LED_IDLE: /* IDLE */
|
||||
phy_set_led(BOARD_LED_GREEN, g_initialized);
|
||||
break;
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,102 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (C) 2015 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file px4esc_usb.c
|
||||
*
|
||||
* Board-specific USB functions.
|
||||
*/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <px4_config.h>
|
||||
|
||||
#include <sys/types.h>
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/usb/usbdev.h>
|
||||
#include <nuttx/usb/usbdev_trace.h>
|
||||
|
||||
#include <up_arch.h>
|
||||
#include <stm32.h>
|
||||
#include "board_config.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_usbinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to setup USB-related GPIO pins for the PX4FMU board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
__EXPORT void stm32_usbinitialize(void)
|
||||
{
|
||||
}
|
||||
|
||||
int stm32_usbpullup(FAR struct usbdev_s *dev, bool enable)
|
||||
{
|
||||
usbtrace(TRACE_DEVPULLUP, (uint16_t)enable);
|
||||
return OK;
|
||||
}
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_usbsuspend
|
||||
*
|
||||
* Description:
|
||||
* Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
|
||||
* used. This function is called whenever the USB enters or leaves suspend mode.
|
||||
* This is an opportunity for the board logic to shutdown clocks, power, etc.
|
||||
* while the USB is suspended.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
|
||||
{
|
||||
uinfo("resume: %d\n", resume);
|
||||
}
|
||||
Reference in New Issue
Block a user