Add logic to STM32 SDIO driver to terminate on a DMA error

git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@4408 7fd9a85b-ad96-42d3-883c-3090e2eb8679

nuttx/arch/arm/src/stm32/stm32_dma.h

@@ -45,6 +45,8 @@
 
 #include "chip.h"
 
+/* Include the correct DMA register definitions for this STM32 family */
+
 #if defined(CONFIG_STM32_STM32F10XX)
 #  include "chip/stm32f10xxx_dma.h"
 #elif defined(CONFIG_STM32_STM32F40XX)
@@ -53,12 +55,50 @@
 #  error "Unknown STM32 DMA"
 #endif
 
+/* These definitions provide the bit encoding of the 'status' parameter passed to the
+ * DMA callback function (see dma_callback_t).
+ */
+
+#if defined(CONFIG_STM32_STM32F10XX)
+#  define DMA_STATUS_FEIF         0
+#  define DMA_STATUS_DMEIF        0
+#  define DMA_STATUS_TEIF         DMA_CHAN_TEIF_BIT /* Channel Transfer Error */
+#  define DMA_STATUS_HTIF         DMA_CHAN_HTIF_BIT /* Channel Half Transfer */
+#  define DMA_STATUS_TCIF         DMA_CHAN_TCIF_BIT /* Channel Transfer Complete */
+#elif defined(CONFIG_STM32_STM32F40XX)
+#  define DMA_STATUS_FEIF         DMA_STREAM_FEIF_BIT  /* Stream FIFO error */
+#  define DMA_STATUS_DMEIF        DMA_STREAM_DMEIF_BIT /* Stream direct mode error */
+#  define DMA_STATUS_TEIF         DMA_STREAM_TEIF_BIT  /* Stream Transfer Error */
+#  define DMA_STATUS_HTIF         DMA_STREAM_HTIF_BIT  /* Stream Half Transfer */
+#  define DMA_STATUS_TCIF         DMA_STREAM_TCIF_BIT  /* Stream Transfer Complete */
+#endif
+
+#define DMA_STATUS_ERROR          (DMA_STATUS_FEIF|DMA_STATUS_DMEIF|DMA_STATUS_TEIF)
+#define DMA_STATUS_SUCCESS        (DMA_STATUS_TCIF|DMA_STATUS_HTIF)
+
 /************************************************************************************
  * Public Types
  ************************************************************************************/
 
+/* DMA_HANDLE provides an opaque are reference that can be used to represent a DMA
+ * channel (F1) or a DMA stream (F4).
+ */
+
 typedef FAR void *DMA_HANDLE;
-typedef void (*dma_callback_t)(DMA_HANDLE handle, uint8_t isr, void *arg);
+
+/* Description:
+ *   This is the type of the callback that is used to inform the user of the the
+ *   completion of the DMA.
+ *
+ * Input Parameters:
+ *   handle - Refers tot he DMA channel or stream
+ *   status - A bit encoded value that provides the completion status.  See the
+ *            DMASTATUS_* definitions above.
+ *   arg    - A user-provided value that was provided when stm32_dmastart() was
+ *            called.
+ */
+
+typedef void (*dma_callback_t)(DMA_HANDLE handle, uint8_t status, void *arg);
 
 #ifdef CONFIG_DEBUG_DMA
 #if defined(CONFIG_STM32_STM32F10XX)

nuttx/arch/arm/src/stm32/stm32_sdio.c

@@ -401,7 +401,7 @@ static void stm32_dumpsamples(struct stm32_dev_s *priv);
 #endif
 
 #ifdef CONFIG_SDIO_DMA
-static void stm32_dmacallback(DMA_HANDLE handle, uint8_t isr, void *arg);
+static void stm32_dmacallback(DMA_HANDLE handle, uint8_t status, void *arg);
 #endif
 
 /* Data Transfer Helpers ****************************************************/
@@ -856,25 +856,42 @@ static void stm32_dumpsamples(struct stm32_dev_s *priv)
  ****************************************************************************/
 
 #ifdef CONFIG_SDIO_DMA
-static void stm32_dmacallback(DMA_HANDLE handle, uint8_t isr, void *arg)
+static void stm32_dmacallback(DMA_HANDLE handle, uint8_t status, void *arg)
 {
   FAR struct stm32_dev_s *priv = (FAR struct stm32_dev_s *)arg;
   DEBUGASSERT(priv->dmamode);
+  sdio_eventset_t result;
 
-  /* The SDIO appears to handle the End-Of-Transfer interrupt first with the
+  /* In the normal case, SDIO appears to handle the End-Of-Transfer interrupt
-   * End-Of-DMA event occurring significantly later.
+   * first with the End-Of-DMA event occurring significantly later.  On
+   * transfer errors, however, the DMA error will occur before the End-of-
+   * Transfer.
    */
 
   stm32_sample((struct stm32_dev_s*)arg, SAMPLENDX_DMA_CALLBACK);
 
-  /* Then terminate the transfer (we should already have the SDIO transfer
+  /* Get the result of the DMA transfer */
-   * done interrupt.  If not, the transfer will appropriately time out).
+
+  if ((status & DMA_STATUS_ERROR) != 0)
+    {
+      flldbg("DMA error %02x, remaining: %d\n", status, priv->remaining);
+      result = SDIOWAIT_ERROR;
+    }
+  else
+    {
+      result = SDIOWAIT_TRANSFERDONE;
+    }
+
+  /* Then terminate the transfer if this completes all of the steps in the
+   * transfer OR if a DMA error occurred.  In the non-error case, we should
+   * already have the SDIO transfer done interrupt.  If not, the transfer
+   * will appropriately time out.
    */
 
   priv->xfrflags |= SDIO_DMADONE_FLAG;
-  if (priv->xfrflags == SDIO_ALLDONE)
+  if (priv->xfrflags == SDIO_ALLDONE || result == SDIOWAIT_ERROR)
     {
-      stm32_endtransfer(priv, SDIOWAIT_TRANSFERDONE);
+      stm32_endtransfer(priv, result);
     }
 }
 #endif

nuttx/configs/stm32f4discovery/README.txt

@@ -587,7 +587,7 @@ Where <subdir> is one of the following:
 
        CONFIG_DEBUG_PWM
 
-    1. This example supports the Quadrature Encode test (apps/examples/qencoder)
+    2. This example supports the Quadrature Encode test (apps/examples/qencoder)
        but this must be manually enabled by selecting:
 
        CONFIG_QENCODER=y         : Enable the generic Quadrature Encoder infrastructure

nuttx/include/nuttx/sdio.h

@@ -1,8 +1,8 @@
 /****************************************************************************
  * include/nuttx/sdio.h
  *
- *   Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2009, 2011-2012 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions