mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-10-17 06:53:35 +08:00
Adding px4cannode-v1 board and bootloader
This commit is contained in:
David Sidrane
committed by
Lorenz Meier
Lorenz Meier
parent
cd8b759fed
commit
bba8371b0f
@@ -0,0 +1,69 @@
|
||||
############################################################################
|
||||
#
|
||||
# Copyright (c) 2015 PX4 Development Team. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name PX4 nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include_directories(../../bootloaders/include)
|
||||
|
||||
set(SRCS)
|
||||
list(APPEND SRCS
|
||||
../common/board_name.c
|
||||
px4cannode_can.c
|
||||
px4cannode_buttons.c
|
||||
px4cannode_init.c
|
||||
px4cannode_led.c
|
||||
px4cannode_spi.c
|
||||
../../../drivers/bootloaders/src/common/boot_app_shared.c
|
||||
../../../drivers/bootloaders/src/util/crc.c
|
||||
)
|
||||
|
||||
if(${OS} STREQUAL "nuttx")
|
||||
if (NOT ${BOARD} STREQUAL "sim")
|
||||
list(APPEND SRCS
|
||||
../../../drivers/device/device_nuttx.cpp
|
||||
../../../drivers/device/cdev.cpp
|
||||
)
|
||||
endif()
|
||||
else()
|
||||
list(APPEND SRCS
|
||||
../../../drivers/device/device_posix.cpp
|
||||
../../../drivers/device/vdev.cpp
|
||||
)
|
||||
endif()
|
||||
|
||||
px4_add_module(
|
||||
MODULE drivers__boards__px4cannode-v1
|
||||
COMPILE_FLAGS
|
||||
-Os
|
||||
SRCS ${SRCS}
|
||||
DEPENDS
|
||||
platforms__common
|
||||
)
|
||||
@@ -0,0 +1,290 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2012-2015 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file board_config.h
|
||||
*
|
||||
* PX4CANNODEv1 internal definitions
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
/****************************************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************************************/
|
||||
|
||||
#include <px4_config.h>
|
||||
#include <nuttx/compiler.h>
|
||||
#include <stdint.h>
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
#if STM32_NSPI < 1
|
||||
# undef CONFIG_STM32_SPI1
|
||||
# undef CONFIG_STM32_SPI2
|
||||
#elif STM32_NSPI < 2
|
||||
# undef CONFIG_STM32_SPI2
|
||||
#endif
|
||||
|
||||
/* High-resolution timer
|
||||
*/
|
||||
#define HRT_TIMER 1 /* use timer1 for the HRT */
|
||||
#define HRT_TIMER_CHANNEL 1 /* use capture/compare channel */
|
||||
#define HRT_PPM_CHANNEL 3 /* use capture/compare channel 3 */
|
||||
#define GPIO_PPM_IN (GPIO_ALT|GPIO_CNF_INPULLUP|GPIO_PORTB|GPIO_PIN12)
|
||||
|
||||
/* LEDs *****************************************************************************
|
||||
*
|
||||
* GPIO Function MPU Board
|
||||
* Pin # Name
|
||||
* -- ----- -------------------------------- ----------------------------
|
||||
*
|
||||
* PA[05] PA5/SPI1_SCK/ADC5 21 D13(SCK1/LED1)
|
||||
* PA[01] PA1/USART2_RTS/ADC1/TIM2_CH2 15 D3(LED2)
|
||||
*/
|
||||
|
||||
#define GPIO_LED1 (GPIO_OUTPUT | GPIO_CNF_OUTPP | GPIO_MODE_50MHz | \
|
||||
GPIO_PORTA | GPIO_PIN5 | GPIO_OUTPUT_CLEAR)
|
||||
#define GPIO_LED_GREEN GPIO_LED1
|
||||
#define GPIO_LED2 (GPIO_OUTPUT | GPIO_CNF_OUTPP | GPIO_MODE_50MHz | \
|
||||
GPIO_PORTA | GPIO_PIN1 | GPIO_OUTPUT_CLEAR)
|
||||
#define GPIO_LED_YELLOW GPIO_LED2
|
||||
|
||||
/* BUTTON ***************************************************************************
|
||||
*
|
||||
* GPIO Function MPU Board
|
||||
* Pin # Name
|
||||
* -- ----- -------------------------------- ----------------------------
|
||||
*
|
||||
* PC[09] PC9/TIM3_CH4 40 BOOT0
|
||||
*
|
||||
*/
|
||||
|
||||
#define BUTTON_BOOT0n (GPIO_INPUT | GPIO_CNF_INFLOAT | GPIO_PORTC | GPIO_PIN9 | \
|
||||
GPIO_EXTI)
|
||||
#define IRQBUTTON BUTTON_BOOT0_BIT
|
||||
|
||||
/* USBs *****************************************************************************
|
||||
*
|
||||
* GPIO Function MPU Board
|
||||
* Pin # Name
|
||||
* -- ----- -------------------------------- ----------------------------
|
||||
*
|
||||
* PC[11] PC11/USART3_RX 52 USB_P
|
||||
* PC[12] PC12/USART3_CK 53 DISC
|
||||
*
|
||||
*/
|
||||
|
||||
#define GPIO_USB_VBUS (GPIO_INPUT | GPIO_CNF_INFLOAT | GPIO_PORTC | GPIO_PIN11)
|
||||
#define GPIO_USB_PULLUPn (GPIO_OUTPUT | GPIO_CNF_OUTPP | GPIO_MODE_50MHz | \
|
||||
GPIO_PORTC | GPIO_PIN12 | GPIO_OUTPUT_SET)
|
||||
|
||||
/* SPI ***************************************************************************
|
||||
*
|
||||
* GPIO Function MPU Board
|
||||
* Pin # Name
|
||||
* -- ----- -------------------------------- ----------------------------
|
||||
*
|
||||
* PC[09] PA4/SPI1_NSS/USART2_CK/ADC4 20 D10(#SS1)
|
||||
* PD[02] PD2/TIM3_ETR 54 D25(MMC_CS)
|
||||
*/
|
||||
|
||||
#define GPIO_SPI1_SSn (GPIO_OUTPUT | GPIO_CNF_OUTPP | GPIO_MODE_50MHz | \
|
||||
GPIO_PORTC | GPIO_PIN9 | GPIO_OUTPUT_SET)
|
||||
#define USER_CSn GPIO_SPI1_SSn
|
||||
|
||||
#define GPIO_SPI2_SSn (GPIO_OUTPUT | GPIO_CNF_OUTPP | GPIO_MODE_50MHz | \
|
||||
GPIO_PORTD | GPIO_PIN2 | GPIO_OUTPUT_SET)
|
||||
#define MMCSD_CSn GPIO_SPI2_SSn
|
||||
|
||||
/* CAN ***************************************************************************
|
||||
*
|
||||
* GPIO Function MPU Board
|
||||
* Pin # Name
|
||||
* -- ----- -------------------------------- ----------------------------
|
||||
*
|
||||
* PB[08] PB8/TIM4_CH3/I2C1_SCL/CANRX 61 D14(CANRX)
|
||||
* PB[09] PB9/TIM4_CH4/I2C1_SDA/CANTX 62 D24(CANTX)
|
||||
* PC[13] PC13/ANTI_TAMP 2 D21(CAN_CTRL)
|
||||
*/
|
||||
|
||||
#define GPIO_CAN_CTRL (GPIO_OUTPUT | GPIO_CNF_OUTPP | GPIO_MODE_50MHz | \
|
||||
GPIO_PORTC | GPIO_PIN13 | GPIO_OUTPUT_CLEAR)
|
||||
|
||||
#define BOARD_NAME "PX4CANNODE_V1"
|
||||
|
||||
__BEGIN_DECLS
|
||||
|
||||
/************************************************************************************
|
||||
* Public Types
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public data
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || \
|
||||
defined(CONFIG_STM32_SPI3)
|
||||
void weak_function board_spiinitialize(void);
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_usbinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to setup USB-related GPIO pins.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void stm32_usbinitialize(void);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_usb_set_pwr_callback()
|
||||
*
|
||||
* Description:
|
||||
* Called to setup set a call back for USB power state changes.
|
||||
*
|
||||
* Inputs:
|
||||
* pwr_changed_handler: An interrupt handler that will be called on VBUS power
|
||||
* state changes.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void stm32_usb_set_pwr_callback(xcpt_t pwr_changed_handler);
|
||||
|
||||
/****************************************************************************
|
||||
* Name: stm32_led_initialize
|
||||
*
|
||||
* Description:
|
||||
* This functions is called very early in initialization to perform board-
|
||||
* specific initialization of LED-related resources. This includes such
|
||||
* things as, for example, configure GPIO pins to drive the LEDs and also
|
||||
* putting the LEDs in their correct initial state.
|
||||
*
|
||||
* NOTE: In most architectures, LED initialization() is called from
|
||||
* board-specific initialization and should, therefore, have the name
|
||||
* <arch>_led_intialize(). But there are a few architectures where the
|
||||
* LED initialization function is still called from common chip
|
||||
* architecture logic. This interface is not, however, a common board
|
||||
* interface in any event and the name board_autoled_initialization is
|
||||
* deprecated.
|
||||
*
|
||||
* Input Parameters:
|
||||
* None
|
||||
*
|
||||
* Returned Value:
|
||||
* None
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
void board_autoled_initialize(void);
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_can_initialize
|
||||
*
|
||||
* Description:
|
||||
* Called at application startup time to initialize the CAN functionality.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#if defined(CONFIG_CAN) && (defined(CONFIG_STM32_CAN1) || defined(CONFIG_STM32_CAN2))
|
||||
int board_can_initialize(void);
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Name: board_button_initialize
|
||||
*
|
||||
* Description:
|
||||
* Called at application startup time to initialize the Buttons functionality.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#if defined(CONFIG_ARCH_BUTTONS)
|
||||
void board_button_initialize(void);
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Name: usbmsc_archinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called from the application system/usbmc or the boards_nsh if the
|
||||
* application is not included.
|
||||
* Perform architecture specific initialization. This function must
|
||||
* configure the block device to export via USB. This function must be
|
||||
* provided by architecture-specific logic in order to use this add-on.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#if !defined(CONFIG_NSH_BUILTIN_APPS) && !defined(CONFIG_SYSTEM_USBMSC)
|
||||
int usbmsc_archinitialize(void);
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Name: composite_archinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called from the application system/composite or the boards_nsh if the
|
||||
* application is not included.
|
||||
* Perform architecture specific initialization. This function must
|
||||
* configure the block device to export via USB. This function must be
|
||||
* provided by architecture-specific logic in order to use this add-on.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#if !defined(CONFIG_NSH_BUILTIN_APPS) && !defined(CONFIG_SYSTEM_COMPOSITE)
|
||||
extern int composite_archinitialize(void);
|
||||
#endif
|
||||
|
||||
#include "../common/board_common.h"
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
|
||||
__END_DECLS
|
||||
@@ -0,0 +1,65 @@
|
||||
############################################################################
|
||||
#
|
||||
# Copyright (c) 2015 PX4 Development Team. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name PX4 nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
|
||||
add_definitions(
|
||||
-DHW_UAVCAN_NAME=${uavcanblid_name}
|
||||
-DHW_VERSION_MAJOR=${uavcanblid_hw_version_major}
|
||||
-DHW_VERSION_MINOR=${uavcanblid_hw_version_minor}
|
||||
)
|
||||
|
||||
include_directories(${px4_bootloader_base}include)
|
||||
include_directories(${px4_module_base}systemlib)
|
||||
include_directories(.)
|
||||
|
||||
px4_add_module(
|
||||
MODULE drivers__boards__px4cannode-v1__bootloader
|
||||
COMPILE_FLAGS
|
||||
-Os
|
||||
SRCS
|
||||
boot.c
|
||||
led.c
|
||||
${px4_bootloader_base}src/uavcan/main.c
|
||||
${px4_bootloader_base}src/common/boot_app_shared.c
|
||||
${px4_bootloader_base}src/sched/timer.c
|
||||
${px4_bootloader_base}src/fs/flash.c
|
||||
${px4_bootloader_base}src/util/crc.c
|
||||
${px4_bootloader_base}src/util/random.c
|
||||
${px4_bootloader_base}src/arch/stm32/drivers/can/driver.c
|
||||
${px4_bootloader_base}src/protocol/uavcan.c
|
||||
DEPENDS
|
||||
nuttx_export_${BOARD}
|
||||
)
|
||||
|
||||
|
||||
# vim: set noet ft=cmake fenc=utf-8 ff=unix :
|
||||
@@ -0,0 +1,222 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2015 PX4 Development Team. All rights reserved.
|
||||
* Author: Ben Dyer <ben_dyer@mac.com>
|
||||
* Pavel Kirienko <pavel.kirienko@zubax.com>
|
||||
* David Sidrane <david_s5@nscdg.com>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <px4_config.h>
|
||||
#include <stdint.h>
|
||||
#include "boot_config.h"
|
||||
#include "board.h"
|
||||
|
||||
#include <debug.h>
|
||||
#include <string.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include <nuttx/board.h>
|
||||
#include "led.h"
|
||||
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Types
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Function Prototypes
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Data
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Data
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the initialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
__EXPORT void stm32_boardinitialize(void)
|
||||
{
|
||||
putreg32(getreg32(STM32_RCC_APB1ENR) | RCC_APB1ENR_CAN1EN, STM32_RCC_APB1ENR);
|
||||
stm32_configgpio(GPIO_CAN1_RX);
|
||||
stm32_configgpio(GPIO_CAN1_TX);
|
||||
stm32_configgpio(GPIO_CAN_CTRL);
|
||||
putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST,
|
||||
STM32_RCC_APB1RSTR);
|
||||
putreg32(getreg32(STM32_RCC_APB1RSTR) & ~RCC_APB1RSTR_CAN1RST,
|
||||
STM32_RCC_APB1RSTR);
|
||||
|
||||
#if defined(OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO)
|
||||
stm32_configgpio(GPIO_GETNODEINFO_JUMPER);
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_boarddeinitialize
|
||||
*
|
||||
* Description:
|
||||
* This function is called by the bootloader code prior to booting
|
||||
* the application. Is should place the HW into an benign initialized state.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void stm32_boarddeinitialize(void)
|
||||
{
|
||||
|
||||
putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST,
|
||||
STM32_RCC_APB1RSTR);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_get_product_name
|
||||
*
|
||||
* Description:
|
||||
* Called to retrieve the product name. The returned value is a assumed
|
||||
* to be written to a pascal style string that will be length prefixed
|
||||
* and not null terminated
|
||||
*
|
||||
* Input Parameters:
|
||||
* product_name - A pointer to a buffer to write the name.
|
||||
* maxlen - The maximum number of charter that can be written
|
||||
*
|
||||
* Returned Value:
|
||||
* The length of characters written to the buffer.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
uint8_t board_get_product_name(uint8_t *product_name, size_t maxlen)
|
||||
{
|
||||
DEBUGASSERT(maxlen > UAVCAN_STRLEN(HW_UAVCAN_NAME));
|
||||
memcpy(product_name, HW_UAVCAN_NAME, UAVCAN_STRLEN(HW_UAVCAN_NAME));
|
||||
return UAVCAN_STRLEN(HW_UAVCAN_NAME);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_get_hardware_version
|
||||
*
|
||||
* Description:
|
||||
* Called to retrieve the hardware version information. The function
|
||||
* will first initialize the the callers struct to all zeros.
|
||||
*
|
||||
* Input Parameters:
|
||||
* hw_version - A pointer to a uavcan_hardwareversion_t.
|
||||
*
|
||||
* Returned Value:
|
||||
* Length of the unique_id
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
size_t board_get_hardware_version(uavcan_HardwareVersion_t *hw_version)
|
||||
{
|
||||
size_t length = 12;
|
||||
memset(hw_version, 0 , sizeof(uavcan_HardwareVersion_t));
|
||||
|
||||
hw_version->major = HW_VERSION_MAJOR;
|
||||
hw_version->minor = HW_VERSION_MINOR;
|
||||
|
||||
memcpy(hw_version->unique_id, (void *) STM32_SYSMEM_UID, length);
|
||||
return length;
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_indicate
|
||||
*
|
||||
* Description:
|
||||
* Provides User feedback to indicate the state of the bootloader
|
||||
* on board specific hardware.
|
||||
*
|
||||
* Input Parameters:
|
||||
* indication - A member of the uiindication_t
|
||||
*
|
||||
* Returned Value:
|
||||
* None
|
||||
*
|
||||
****************************************************************************/
|
||||
#define led(n, code, r , g , b, h) {.red = (r),.green = (g), .blue = (b),.hz = (h)}
|
||||
|
||||
typedef struct packed_struct led_t {
|
||||
uint16_t red : 5;
|
||||
uint16_t green : 6;
|
||||
uint16_t blue : 5;
|
||||
uint8_t hz;
|
||||
} led_t;
|
||||
|
||||
static const led_t i2l[] = {
|
||||
|
||||
led(0, off, 0, 0, 0, 0),
|
||||
led(1, reset, 10, 63, 31, 255),
|
||||
led(2, autobaud_start, 0, 63, 0, 1),
|
||||
led(3, autobaud_end, 0, 63, 0, 2),
|
||||
led(4, allocation_start, 0, 0, 31, 2),
|
||||
led(5, allocation_end, 0, 63, 31, 3),
|
||||
led(6, fw_update_start, 15, 63, 31, 3),
|
||||
led(7, fw_update_erase_fail, 15, 63, 15, 3),
|
||||
led(8, fw_update_invalid_response, 31, 0, 0, 1),
|
||||
led(9, fw_update_timeout, 31, 0, 0, 2),
|
||||
led(a, fw_update_invalid_crc, 31, 0, 0, 4),
|
||||
led(b, jump_to_app, 0, 63, 0, 10),
|
||||
|
||||
};
|
||||
|
||||
void board_indicate(uiindication_t indication)
|
||||
{
|
||||
rgb_led(i2l[indication].red << 3,
|
||||
i2l[indication].green << 2,
|
||||
i2l[indication].blue << 3,
|
||||
i2l[indication].hz);
|
||||
}
|
||||
@@ -0,0 +1,139 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2012-2015 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/*
|
||||
* @file boot_config.h
|
||||
*
|
||||
* bootloader definitions that configures the behavior and options
|
||||
* of the Boot loader
|
||||
* This file is relies on the parent folder's boot_config.h file and defines
|
||||
* different usages of the hardware for bootloading
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
/* Bring in the board_config.h definitions
|
||||
* todo:make this be pulled in from a targed's build
|
||||
* files in nuttx*/
|
||||
|
||||
#include "../board_config.h"
|
||||
#include "uavcan.h"
|
||||
#include <nuttx/compiler.h>
|
||||
#include <stdint.h>
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
#define OPT_PREFERRED_NODE_ID ANY_NODE_ID
|
||||
|
||||
//todo:wrap OPT_x in in ifdefs for command line definitions
|
||||
#define OPT_TBOOT_MS 5000
|
||||
#define OPT_NODE_STATUS_RATE_MS 800
|
||||
#define OPT_NODE_INFO_RATE_MS 50
|
||||
#define OPT_BL_NUMBER_TIMERS 7
|
||||
|
||||
/*
|
||||
* This Option set is set to 1 ensure a provider of firmware has an
|
||||
* opportunity update the node's firmware.
|
||||
* This Option is the default policy and can be overridden by
|
||||
* a jumper
|
||||
* When this Policy is set, the node will ignore tboot and
|
||||
* wait indefinitely for a GetNodeInfo request before booting.
|
||||
*
|
||||
* OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT is used to allow
|
||||
* the polarity of the jumper to be True Active
|
||||
*
|
||||
* wait OPT_WAIT_FOR_GETNODEINFO OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO
|
||||
* Jumper
|
||||
* yes 1 0 x
|
||||
* yes 1 1 Active
|
||||
* no 1 1 Not Active
|
||||
* no 0 0 X
|
||||
* yes 0 1 Active
|
||||
* no 0 1 Not Active
|
||||
*
|
||||
*/
|
||||
#define OPT_WAIT_FOR_GETNODEINFO 0
|
||||
#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO 1
|
||||
#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT 0
|
||||
|
||||
#define OPT_ENABLE_WD 1
|
||||
|
||||
#define OPT_RESTART_TIMEOUT_MS 20000
|
||||
|
||||
/* Reserved for the Booloader */
|
||||
#define OPT_BOOTLOADER_SIZE_IN_K (1024*8)
|
||||
|
||||
/* Reserved for the application out of the total
|
||||
* system flash minus the BOOTLOADER_SIZE_IN_K
|
||||
*/
|
||||
#define OPT_APPLICATION_RESERVER_IN_K 0
|
||||
|
||||
#define OPT_APPLICATION_IMAGE_OFFSET OPT_BOOTLOADER_SIZE_IN_K
|
||||
#define OPT_APPLICATION_IMAGE_LENGTH (FLASH_SIZE-(OPT_BOOTLOADER_SIZE_IN_K+OPT_APPLICATION_RESERVER_IN_K))
|
||||
|
||||
|
||||
#define FLASH_BASE STM32_FLASH_BASE
|
||||
#define FLASH_NUMBER_PAGES STM32_FLASH_NPAGES
|
||||
#define FLASH_PAGE_SIZE STM32_FLASH_PAGESIZE
|
||||
#define FLASH_SIZE (FLASH_NUMBER_PAGES*FLASH_PAGE_SIZE)
|
||||
|
||||
#define APPLICATION_LOAD_ADDRESS (FLASH_BASE + OPT_APPLICATION_IMAGE_OFFSET)
|
||||
#define APPLICATION_SIZE (FLASH_SIZE-OPT_APPLICATION_IMAGE_OFFSET)
|
||||
#define APPLICATION_LAST_8BIT_ADDRRESS ((uint8_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint8_t)))
|
||||
#define APPLICATION_LAST_32BIT_ADDRRESS ((uint32_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint32_t)))
|
||||
#define APPLICATION_LAST_64BIT_ADDRRESS ((uint64_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint64_t)))
|
||||
|
||||
/* If this board uses big flash that have large sectors */
|
||||
|
||||
#if defined(CONFIG_STM32_FLASH_CONFIG_E) || \
|
||||
defined(CONFIG_STM32_FLASH_CONFIG_F) || \
|
||||
defined(CONFIG_STM32_FLASH_CONFIG_G) || \
|
||||
defined(CONFIG_STM32_FLASH_CONFIG_I)
|
||||
#define OPT_USE_YIELD
|
||||
#endif
|
||||
|
||||
/* Bootloader Option*****************************************************************
|
||||
*
|
||||
* GPIO Function MPU Board
|
||||
* Pin # Name
|
||||
* -- ----- -------------------------------- ----------------------------
|
||||
* * PC[09] PC9/TIM3_CH4 40 BOOT0
|
||||
*/
|
||||
#define GPIO_GETNODEINFO_JUMPER (BUTTON_BOOT0n&~(GPIO_EXTI))
|
||||
@@ -0,0 +1,114 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (C) 2015 PX4 Development Team. All rights reserved.
|
||||
* Author: David Sidrane<david_s5@nscdg.com>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
#include <px4_config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
#include "chip/stm32_tim.h"
|
||||
|
||||
|
||||
#include "led.h"
|
||||
#define TMR_BASE STM32_TIM3_BASE
|
||||
#define TMR_FREQUENCY STM32_APB1_TIM3_CLKIN
|
||||
#define TMR_REG(o) (TMR_BASE+(o))
|
||||
|
||||
|
||||
void rgb_led(int r, int g , int b, int freqs)
|
||||
{
|
||||
|
||||
long fosc = TMR_FREQUENCY;
|
||||
long prescale = 2048;
|
||||
long p1s = fosc / prescale;
|
||||
long p0p5s = p1s / 2;
|
||||
uint16_t val;
|
||||
static bool once = 0;
|
||||
|
||||
if (!once) {
|
||||
once = 1;
|
||||
|
||||
/* Enabel Clock to Block */
|
||||
modifyreg32(STM32_RCC_APB1ENR, 0, RCC_APB1ENR_TIM3EN);
|
||||
|
||||
/* Reload */
|
||||
|
||||
val = getreg16(TMR_REG(STM32_BTIM_EGR_OFFSET));
|
||||
val |= ATIM_EGR_UG;
|
||||
putreg16(val, TMR_REG(STM32_BTIM_EGR_OFFSET));
|
||||
|
||||
/* Set Prescaler STM32_TIM_SETCLOCK */
|
||||
|
||||
putreg16(prescale, TMR_REG(STM32_BTIM_PSC_OFFSET));
|
||||
|
||||
/* Enable STM32_TIM_SETMODE*/
|
||||
|
||||
putreg16(ATIM_CR1_CEN | ATIM_CR1_ARPE, TMR_REG(STM32_BTIM_CR1_OFFSET));
|
||||
|
||||
|
||||
putreg16((ATIM_CCMR_MODE_PWM1 << ATIM_CCMR1_OC1M_SHIFT) | ATIM_CCMR1_OC1PE |
|
||||
(ATIM_CCMR_MODE_PWM1 << ATIM_CCMR1_OC2M_SHIFT) | ATIM_CCMR1_OC2PE, TMR_REG(STM32_GTIM_CCMR1_OFFSET));
|
||||
putreg16((ATIM_CCMR_MODE_PWM1 << ATIM_CCMR2_OC3M_SHIFT) | ATIM_CCMR2_OC3PE, TMR_REG(STM32_GTIM_CCMR2_OFFSET));
|
||||
putreg16(ATIM_CCER_CC3E | ATIM_CCER_CC3P |
|
||||
ATIM_CCER_CC2E | ATIM_CCER_CC2P |
|
||||
ATIM_CCER_CC1E | ATIM_CCER_CC1P, TMR_REG(STM32_GTIM_CCER_OFFSET));
|
||||
|
||||
stm32_configgpio(GPIO_TIM3_CH1OUT);
|
||||
stm32_configgpio(GPIO_TIM3_CH2OUT);
|
||||
stm32_configgpio(GPIO_TIM3_CH3OUT);
|
||||
|
||||
|
||||
}
|
||||
|
||||
long p = freqs == 0 ? p1s : p1s / freqs;
|
||||
putreg32(p, TMR_REG(STM32_BTIM_ARR_OFFSET));
|
||||
|
||||
p = freqs == 0 ? p1s + 1 : p0p5s / freqs;
|
||||
|
||||
putreg32((r * p) / 255, TMR_REG(STM32_GTIM_CCR1_OFFSET));
|
||||
putreg32((g * p) / 255, TMR_REG(STM32_GTIM_CCR2_OFFSET));
|
||||
putreg32((b * p) / 255, TMR_REG(STM32_GTIM_CCR3_OFFSET));
|
||||
|
||||
val = getreg16(TMR_REG(STM32_BTIM_CR1_OFFSET));
|
||||
|
||||
if (freqs == 0) {
|
||||
val &= ~ATIM_CR1_CEN;
|
||||
|
||||
} else {
|
||||
val |= ATIM_CR1_CEN;
|
||||
}
|
||||
|
||||
putreg16(val, TMR_REG(STM32_BTIM_CR1_OFFSET));
|
||||
|
||||
}
|
||||
@@ -0,0 +1,38 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (C) 2015 PX4 Development Team. All rights reserved.
|
||||
* Author: David Sidrane<david_s5@nscdg.com>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
#include <systemlib/visibility.h>
|
||||
|
||||
__BEGIN_DECLS
|
||||
void rgb_led(int r, int g , int b, int freqs);
|
||||
__END_DECLS
|
||||
@@ -0,0 +1,153 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2012-2015 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file px4cannode_buttons.c
|
||||
*
|
||||
* PX4CANNODE- Buttons
|
||||
*/
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <px4_config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#include <nuttx/arch.h>
|
||||
#include <nuttx/board.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "board_config.h"
|
||||
|
||||
#ifdef CONFIG_ARCH_BUTTONS
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Data
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
void board_button_initialize(void);
|
||||
xcpt_t board_button_irq(int id, xcpt_t irqhandler);
|
||||
/****************************************************************************
|
||||
* Button support.
|
||||
*
|
||||
* Description:
|
||||
* board_button_initialize() must be called to initialize button resources.
|
||||
*
|
||||
* After board_button_initialize() has been called, board_buttons() may be
|
||||
* called to collect the state of all buttons. board_buttons() returns an
|
||||
* 8-bit bit set with each bit associated with a button.
|
||||
* See the BUTTON_*_BIT definitions in board.h for the meaning of each bit.
|
||||
*
|
||||
* board_button_irq() may be called to register an interrupt handler that
|
||||
* will be called when a button is depressed or released. The ID value is
|
||||
* a button enumeration value that uniquely identifies a button resource.
|
||||
* See the BUTTON_* definitions in board.h for the meaning of enumeration
|
||||
* value. The previous interrupt handler address is returned
|
||||
* (so that it may restored, if so desired).
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_button_initialize
|
||||
*
|
||||
* Description:
|
||||
* board_button_initialize() must be called to initialize button resources.
|
||||
* After that, board_buttons() may be called to collect the current state of
|
||||
* all buttons or board_button_irq() may be called to register button
|
||||
* interrupt handlers.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
void board_button_initialize(void)
|
||||
{
|
||||
stm32_configgpio(BUTTON_BOOT0n);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_buttons
|
||||
*
|
||||
* Description:
|
||||
*
|
||||
* After board_button_initialize() has been called, board_buttons() may be
|
||||
* called to collect the state of all buttons. board_buttons() returns an
|
||||
* 8-bit bit set with each bit associated with a button.
|
||||
* See the BUTTON_*_BIT definitions in board.h for the meaning of each bit.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
uint8_t board_buttons(void)
|
||||
{
|
||||
return stm32_gpioread(BUTTON_BOOT0n) ? 0 : BUTTON_BOOT0_MASK;
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_button_irq
|
||||
*
|
||||
* Description:
|
||||
*
|
||||
* board_button_irq() may be called to register an interrupt handler that
|
||||
* will be called when a button is depressed or released. The ID value is
|
||||
* a button enumeration value that uniquely identifies a button resource.
|
||||
* See the BUTTON_* definitions in board.h for the meaning of enumeration
|
||||
* value. The previous interrupt handler address is returned
|
||||
* (so that it may restored, if so desired).
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_IRQBUTTONS
|
||||
xcpt_t board_button_irq(int id, xcpt_t irqhandler)
|
||||
{
|
||||
xcpt_t oldhandler = NULL;
|
||||
|
||||
/* The following should be atomic */
|
||||
|
||||
if (id == IRQBUTTON) {
|
||||
oldhandler = stm32_gpiosetevent(BUTTON_BOOT0n, true, true, true, irqhandler);
|
||||
}
|
||||
|
||||
return oldhandler;
|
||||
}
|
||||
#endif
|
||||
#endif /* CONFIG_ARCH_BUTTONS */
|
||||
@@ -0,0 +1,131 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (C) 2015 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file pxesc_can.c
|
||||
*
|
||||
* Board-specific CAN functions.
|
||||
*/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <px4_config.h>
|
||||
|
||||
#include <errno.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/drivers/can.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "chip.h"
|
||||
#include "up_arch.h"
|
||||
|
||||
#include "stm32.h"
|
||||
#include "stm32_can.h"
|
||||
#include "board_config.h"
|
||||
|
||||
#if defined(CONFIG_CAN)
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
/* Configuration ********************************************************************/
|
||||
/* The STM32F107VC supports CAN1 and CAN2 */
|
||||
|
||||
#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
|
||||
# warning "Both CAN1 and CAN2 are enabled. Assuming only CAN1."
|
||||
# undef CONFIG_STM32_CAN2
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_CAN1
|
||||
# define CAN_PORT 1
|
||||
#else
|
||||
# define CAN_PORT 2
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
int can_devinit(void);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: can_devinit
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following interface to work with
|
||||
* examples/can.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
__EXPORT int can_devinit(void)
|
||||
{
|
||||
static bool initialized = false;
|
||||
struct can_dev_s *can;
|
||||
int ret;
|
||||
|
||||
/* Check if we have already initialized */
|
||||
|
||||
if (!initialized) {
|
||||
/* Call stm32_caninitialize() to get an instance of the CAN interface */
|
||||
|
||||
can = stm32_caninitialize(CAN_PORT);
|
||||
|
||||
if (can == NULL) {
|
||||
canerr("ERROR: Failed to get CAN interface\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* Register the CAN driver at "/dev/can0" */
|
||||
|
||||
ret = can_register("/dev/can0", can);
|
||||
|
||||
if (ret < 0) {
|
||||
canerr("ERROR: can_register failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* Now we are initialized */
|
||||
|
||||
initialized = true;
|
||||
}
|
||||
|
||||
return OK;
|
||||
}
|
||||
|
||||
#endif /* CONFIG_CAN && CONFIG_STM32_CAN1 */
|
||||
@@ -0,0 +1,193 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2012-2015 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file px4cannode_init.c
|
||||
*
|
||||
* PX4CANNODE-specific early startup code. This file implements the
|
||||
* board_app_initialize() function that is called early by nsh during startup.
|
||||
*
|
||||
* Code here is run before the rcS script is invoked; it should start required
|
||||
* subsystems and perform board-specific initialization.
|
||||
*/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <px4_config.h>
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <stdio.h>
|
||||
#include <debug.h>
|
||||
#include <errno.h>
|
||||
|
||||
#include <nuttx/arch.h>
|
||||
#include <nuttx/board.h>
|
||||
#include <nuttx/spi/spi.h>
|
||||
#include <nuttx/i2c/i2c_master.h>
|
||||
#include <nuttx/mmcsd.h>
|
||||
#include <nuttx/analog/adc.h>
|
||||
|
||||
#include <stm32.h>
|
||||
#include "board_config.h"
|
||||
#include "stm32_uart.h"
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include <drivers/drv_hrt.h>
|
||||
#include <drivers/drv_led.h>
|
||||
|
||||
#include <systemlib/cpuload.h>
|
||||
|
||||
#if defined(CONFIG_HAVE_CXX) && defined(CONFIG_HAVE_CXXINITIALIZE)
|
||||
#include <systemlib/systemlib.h>
|
||||
#endif
|
||||
|
||||
#include "board_config.h"
|
||||
|
||||
/* todo: This is constant but not proper */
|
||||
__BEGIN_DECLS
|
||||
extern void led_off(int led);
|
||||
__END_DECLS
|
||||
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-Processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/* Configuration ************************************************************/
|
||||
|
||||
/* Debug ********************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Protected Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the initialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
__EXPORT void stm32_boardinitialize(void)
|
||||
{
|
||||
/* configure LEDs */
|
||||
board_autoled_initialize();
|
||||
board_button_initialize();
|
||||
stm32_configgpio(GPIO_CAN_CTRL);
|
||||
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || \
|
||||
defined(CONFIG_STM32_SPI3)
|
||||
board_spiinitialize();
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
__EXPORT void board_initialize(void)
|
||||
{
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_app_initialize
|
||||
*
|
||||
* Description:
|
||||
* Perform application specific initialization. This function is never
|
||||
* called directly from application code, but only indirectly via the
|
||||
* (non-standard) boardctl() interface using the command BOARDIOC_INIT.
|
||||
*
|
||||
* Input Parameters:
|
||||
* arg - The boardctl() argument is passed to the board_app_initialize()
|
||||
* implementation without modification. The argument has no
|
||||
* meaning to NuttX; the meaning of the argument is a contract
|
||||
* between the board-specific initalization logic and the the
|
||||
* matching application logic. The value cold be such things as a
|
||||
* mode enumeration value, a set of DIP switch switch settings, a
|
||||
* pointer to configuration data read from a file or serial FLASH,
|
||||
* or whatever you would like to do with it. Every implementation
|
||||
* should accept zero/NULL as a default configuration.
|
||||
*
|
||||
* Returned Value:
|
||||
* Zero (OK) is returned on success; a negated errno value is returned on
|
||||
* any failure to indicate the nature of the failure.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
|
||||
__EXPORT int board_app_initialize(uintptr_t arg)
|
||||
{
|
||||
int result = OK;
|
||||
|
||||
#if defined(CONFIG_HAVE_CXX) && defined(CONFIG_HAVE_CXXINITIALIZE)
|
||||
|
||||
/* run C++ ctors before we go any further */
|
||||
|
||||
up_cxxinitialize();
|
||||
|
||||
# if defined(CONFIG_EXAMPLES_NSH_CXXINITIALIZE)
|
||||
# error CONFIG_EXAMPLES_NSH_CXXINITIALIZE Must not be defined! Use CONFIG_HAVE_CXX and CONFIG_HAVE_CXXINITIALIZE.
|
||||
# endif
|
||||
|
||||
#else
|
||||
# error platform is dependent on c++ both CONFIG_HAVE_CXX and CONFIG_HAVE_CXXINITIALIZE must be defined.
|
||||
#endif
|
||||
|
||||
/* configure the high-resolution time/callout interface */
|
||||
hrt_init();
|
||||
|
||||
/* set up the serial DMA polling */
|
||||
static struct hrt_call serial_dma_call;
|
||||
struct timespec ts;
|
||||
|
||||
/*
|
||||
* Poll at 1ms intervals for received bytes that have not triggered
|
||||
* a DMA event.
|
||||
*/
|
||||
ts.tv_sec = 0;
|
||||
ts.tv_nsec = 1000000;
|
||||
|
||||
hrt_call_every(&serial_dma_call,
|
||||
ts_to_abstime(&ts),
|
||||
ts_to_abstime(&ts),
|
||||
(hrt_callout)stm32_serial_dma_poll,
|
||||
NULL);
|
||||
|
||||
return result;
|
||||
}
|
||||
@@ -0,0 +1,174 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2012-2015 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file px4cannode_led.c
|
||||
*
|
||||
* PX4ESC LED backend.
|
||||
*/
|
||||
|
||||
#include <px4_config.h>
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <nuttx/board.h>
|
||||
|
||||
#include "stm32.h"
|
||||
#include "board_config.h"
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include <systemlib/px4_macros.h>
|
||||
|
||||
/*
|
||||
* Ideally we'd be able to get these from up_internal.h,
|
||||
* but since we want to be able to disable the NuttX use
|
||||
* of leds for system indication at will and there is no
|
||||
* separate switch, we need to build independent of the
|
||||
* CONFIG_ARCH_LEDS configuration switch.
|
||||
*/
|
||||
__BEGIN_DECLS
|
||||
extern void led_init(void);
|
||||
extern void led_on(int led);
|
||||
extern void led_off(int led);
|
||||
extern void led_toggle(int led);
|
||||
__END_DECLS
|
||||
|
||||
static uint16_t g_ledmap[] = {
|
||||
GPIO_LED_GREEN, // Indexed by BOARD_LED_GREEN
|
||||
GPIO_LED_YELLOW, // Indexed by BOARD_LED_YELLOW
|
||||
};
|
||||
|
||||
__EXPORT void led_init(void)
|
||||
{
|
||||
/* Configure LED1-2 GPIOs for output */
|
||||
for (size_t l = 0; l < arraySize(g_ledmap); l++) {
|
||||
stm32_configgpio(g_ledmap[l]);
|
||||
}
|
||||
}
|
||||
|
||||
__EXPORT void board_autoled_initialize(void)
|
||||
{
|
||||
led_init();
|
||||
}
|
||||
|
||||
static void phy_set_led(int led, bool state)
|
||||
{
|
||||
/* Pull Up to switch on */
|
||||
stm32_gpiowrite(g_ledmap[led], state);
|
||||
}
|
||||
|
||||
static bool phy_get_led(int led)
|
||||
{
|
||||
|
||||
return !stm32_gpioread(g_ledmap[led]);
|
||||
}
|
||||
|
||||
__EXPORT void led_on(int led)
|
||||
{
|
||||
phy_set_led(led, true);
|
||||
}
|
||||
|
||||
__EXPORT void led_off(int led)
|
||||
{
|
||||
phy_set_led(led, false);
|
||||
}
|
||||
|
||||
__EXPORT void led_toggle(int led)
|
||||
{
|
||||
|
||||
phy_set_led(led, !phy_get_led(led));
|
||||
}
|
||||
|
||||
static bool g_initialized;
|
||||
|
||||
// Nuttx Usages
|
||||
|
||||
__EXPORT void board_autoled_on(int led)
|
||||
{
|
||||
switch (led) {
|
||||
default:
|
||||
case LED_STARTED:
|
||||
case LED_HEAPALLOCATE:
|
||||
case LED_IRQSENABLED:
|
||||
phy_set_led(BOARD_LED_GREEN, false);
|
||||
phy_set_led(BOARD_LED_YELLOW, false);
|
||||
break;
|
||||
|
||||
case LED_STACKCREATED:
|
||||
phy_set_led(BOARD_LED_GREEN, true);
|
||||
phy_set_led(BOARD_LED_YELLOW, false);
|
||||
g_initialized = true;
|
||||
break;
|
||||
|
||||
case LED_INIRQ:
|
||||
case LED_SIGNAL:
|
||||
case LED_ASSERTION:
|
||||
case LED_PANIC:
|
||||
phy_set_led(BOARD_LED_YELLOW, true);
|
||||
break;
|
||||
|
||||
case LED_IDLE : /* IDLE */
|
||||
phy_set_led(BOARD_LED_GREEN, false);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_autoled_off
|
||||
****************************************************************************/
|
||||
|
||||
|
||||
__EXPORT void board_autoled_off(int led)
|
||||
{
|
||||
switch (led) {
|
||||
default:
|
||||
case LED_STARTED:
|
||||
case LED_HEAPALLOCATE:
|
||||
case LED_IRQSENABLED:
|
||||
case LED_STACKCREATED:
|
||||
phy_set_led(BOARD_LED_GREEN, false);
|
||||
|
||||
// no break
|
||||
|
||||
case LED_INIRQ:
|
||||
case LED_SIGNAL:
|
||||
case LED_ASSERTION:
|
||||
case LED_PANIC:
|
||||
phy_set_led(BOARD_LED_YELLOW, false);
|
||||
break;
|
||||
|
||||
case LED_IDLE: /* IDLE */
|
||||
phy_set_led(BOARD_LED_GREEN, g_initialized);
|
||||
break;
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,216 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2015 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file px4cannode_led.c
|
||||
*
|
||||
* PX4FMU SPI backend.
|
||||
*/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <px4_config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <errno.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/spi/spi.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include <nuttx/board.h>
|
||||
#include "chip.h"
|
||||
#include "stm32.h"
|
||||
#include "board_config.h"
|
||||
|
||||
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || defined(CONFIG_STM32_SPI3)
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void weak_function board_spiinitialize(void)
|
||||
{
|
||||
/* Setup CS */
|
||||
|
||||
#ifdef CONFIG_STM32_SPI1
|
||||
stm32_configgpio(USER_CSn);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_SPI2
|
||||
stm32_configgpio(MMCSD_CSn);
|
||||
#endif
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: stm32_spi1/2/3select and stm32_spi1/2/3status
|
||||
*
|
||||
* Description:
|
||||
* The external functions, stm32_spi1/2/3select and stm32_spi1/2/3status
|
||||
* must be provided by board-specific logic. They are implementations of
|
||||
* the select and status methods of the SPI interface defined by struct
|
||||
* spi_ops_s (see include/nuttx/spi/spi.h). All other methods (including
|
||||
* stm32_spibus_initialize()) are provided by common STM32 logic. To use
|
||||
* this common SPI logic on your board:
|
||||
*
|
||||
* 1. Provide logic in stm32_boardinitialize() to configure SPI chip
|
||||
* select pins.
|
||||
* 2. Provide stm32_spi1/2/3select() and stm32_spi1/2/3status() functions
|
||||
* in your board-specific logic. These functions will perform chip
|
||||
* selection and status operations using GPIOs in the way your board
|
||||
* is configured.
|
||||
* 3. Add a calls to stm32_spibus_initialize() in your low level application
|
||||
* initialization logic
|
||||
* 4. The handle returned by stm32_spibus_initialize() may then be used to
|
||||
* bind the SPI driver to higher level logic (e.g., calling
|
||||
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
|
||||
* the SPI MMC/SD driver).
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_STM32_SPI1
|
||||
void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
|
||||
if (devid == SPIDEV_USER) {
|
||||
stm32_gpiowrite(USER_CSn, !selected);
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_SPI2
|
||||
void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
#if defined(CONFIG_MMCSD)
|
||||
|
||||
if (devid == SPIDEV_MMCSD) {
|
||||
stm32_gpiowrite(MMCSD_CSn, !selected);
|
||||
}
|
||||
|
||||
#endif
|
||||
}
|
||||
|
||||
uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
/* No switch on SD card socket so assume it is here */
|
||||
|
||||
return SPI_STATUS_PRESENT;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_SPI3
|
||||
void stm32_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
}
|
||||
|
||||
uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Name: stm32_spi1cmddata
|
||||
*
|
||||
* Description:
|
||||
* Set or clear the SH1101A A0 or SD1306 D/C n bit to select data (true)
|
||||
* or command (false). This function must be provided by platform-specific
|
||||
* logic. This is an implementation of the cmddata method of the SPI
|
||||
* interface defined by struct spi_ops_s (see include/nuttx/spi/spi.h).
|
||||
*
|
||||
* Input Parameters:
|
||||
*
|
||||
* spi - SPI device that controls the bus the device that requires the CMD/
|
||||
* DATA selection.
|
||||
* devid - If there are multiple devices on the bus, this selects which one
|
||||
* to select cmd or data. NOTE: This design restricts, for example,
|
||||
* one one SPI display per SPI bus.
|
||||
* cmd - true: select command; false: select data
|
||||
*
|
||||
* Returned Value:
|
||||
* None
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_SPI_CMDDATA
|
||||
#ifdef CONFIG_STM32_SPI1
|
||||
int stm32_spi1cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd)
|
||||
{
|
||||
return OK;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_SPI2
|
||||
int stm32_spi2cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd)
|
||||
{
|
||||
return OK;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_SPI3
|
||||
int stm32_spi3cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd)
|
||||
{
|
||||
return -ENODEV;
|
||||
}
|
||||
#endif
|
||||
#endif /* CONFIG_SPI_CMDDATA */
|
||||
|
||||
#endif /* CONFIG_STM32_SPI1 || CONFIG_STM32_SPI2 */
|
||||
Reference in New Issue
Block a user