Dequote Kconfig strings that may be used as components of a path

git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@5057 7fd9a85b-ad96-42d3-883c-3090e2eb8679

nuttx/arch/arm/src/lpc17xx/lpc17_ethernet.c

@@ -2101,23 +2101,10 @@ static inline int lpc17_phyinit(struct lpc17_driver_s *priv)
   /* Disable auto-configuration.  Set the fixed speed/duplex mode.
    * (probably more than little redundant).
    *
-   * REVISIT: Revisit the following CONFIG_PHY_CEMENT_DISABLE work-around:
-   *
-   *  "... I found this using a LPC1768 dev board with a DP83848I PHY. I'm
-   *   using CONFIG_PHY_DP83848C for that ... I found that a static
-   *   configuration for the PHY gave errors. I didn't investigate why.
-   *
-   *  "My problem however was that autonegotiation seemingly failed -
-   *   however on debugging I saw the calls for autonegotation were actually
-   *   successful. I tracked the code down to [the following logic] and
-   *   I saw that after the negotation completes, those negotiated
-   *   parameters are then used to set a fixed speed and duplex, "just
-   *   in case". It was that setting of a static configuration which
-   *   failed for me."
-   *
-   *  "I'm not sure if that's required for other situations or not, so I
-   *   added a #define to optionally elide the call to cement the
-   *   configuration. My PHY appears to be happy with this for the moment."
+   * REVISIT: Revisit the following CONFIG_PHY_CEMENT_DISABLE work-around.
+   * It is should not needed if CONFIG_PHY_AUTONEG is defined and is known
+   * cause a problem for at least one PHY (DP83848I PHY).  It might be
+   * safe just to remove this elided coded for all PHYs.
    */
 
 #ifndef CONFIG_PHY_CEMENT_DISABLE