mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-11-05 03:41:37 +08:00
boards: Add Holybro H-Flow (#23865)
This commit is contained in:
Julian Oes
@@ -0,0 +1,65 @@
|
||||
############################################################################
|
||||
#
|
||||
# Copyright (c) 2020 PX4 Development Team. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name PX4 nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
if("${PX4_BOARD_LABEL}" STREQUAL "canbootloader")
|
||||
|
||||
add_library(drivers_board
|
||||
boot_config.h
|
||||
boot.c
|
||||
led.c
|
||||
)
|
||||
target_link_libraries(drivers_board
|
||||
PRIVATE
|
||||
nuttx_arch
|
||||
nuttx_drivers
|
||||
canbootloader
|
||||
)
|
||||
target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/canbootloader)
|
||||
|
||||
else()
|
||||
add_library(drivers_board
|
||||
can.c
|
||||
init.c
|
||||
led.c
|
||||
spi.cpp
|
||||
)
|
||||
|
||||
target_link_libraries(drivers_board
|
||||
PRIVATE
|
||||
arch_spi
|
||||
drivers__led # drv_led_start
|
||||
nuttx_arch
|
||||
nuttx_drivers
|
||||
px4_layer
|
||||
)
|
||||
endif()
|
||||
@@ -0,0 +1,87 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2024 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file board_config.h
|
||||
*
|
||||
* board internal definitions
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include <px4_platform_common/px4_config.h>
|
||||
#include <nuttx/compiler.h>
|
||||
#include <stdint.h>
|
||||
|
||||
/* CAN Silent mode control */
|
||||
#define GPIO_CAN1_SILENT_S0 /* PB7 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN7)
|
||||
|
||||
// TODO: figure out
|
||||
/* Boot config */
|
||||
//#define GPIO_BOOT_CONFIG /* PC15 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN15|GPIO_EXTI)
|
||||
|
||||
/* LEDs are driven with push open drain to support Anode to 5V or 3.3V */
|
||||
#define GPIO_nLED_RED /* PB0 */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN0)
|
||||
#define GPIO_nLED_BLUE /* PB1 */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN1)
|
||||
|
||||
#define BROADCOM_AFBR_S50_S2PI_SPI_BUS 3
|
||||
#define BROADCOM_AFBR_S50_S2PI_CS /* PA15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN15)
|
||||
#define BROADCOM_AFBR_S50_S2PI_IRQ /* PB6 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN6|GPIO_EXTI)
|
||||
#define BROADCOM_AFBR_S50_S2PI_CLK /* PB3 */ GPIO_SPI3_SCK_1
|
||||
#define BROADCOM_AFBR_S50_S2PI_MOSI /* PB5 */ GPIO_SPI3_MOSI_1
|
||||
#define BROADCOM_AFBR_S50_S2PI_MISO /* PB4 */ GPIO_SPI3_MISO_1
|
||||
|
||||
#define BOARD_HAS_CONTROL_STATUS_LEDS 1
|
||||
#define BOARD_OVERLOAD_LED LED_RED
|
||||
#define BOARD_ARMED_STATE_LED LED_BLUE
|
||||
|
||||
// TODO figure out
|
||||
#define GPIO_GETNODEINFO_JUMPER 0 //(GPIO_BOOT_CONFIG & ~GPIO_EXTI)
|
||||
|
||||
#define FLASH_BASED_PARAMS
|
||||
|
||||
/* High-resolution timer */
|
||||
#define HRT_TIMER 3 /* use timer 3 for the HRT */
|
||||
#define HRT_TIMER_CHANNEL 4 /* use capture/compare channel 4 */
|
||||
|
||||
__BEGIN_DECLS
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
extern void stm32_spiinitialize(void);
|
||||
|
||||
#include <px4_platform_common/board_common.h>
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
|
||||
__END_DECLS
|
||||
@@ -0,0 +1,185 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2021 PX4 Development Team. All rights reserved.
|
||||
* Author: Ben Dyer <ben_dyer@mac.com>
|
||||
* Pavel Kirienko <pavel.kirienko@zubax.com>
|
||||
* David Sidrane <david_s5@nscdg.com>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <px4_config.h>
|
||||
#include <stdint.h>
|
||||
#include "boot_config.h"
|
||||
#include "board.h"
|
||||
|
||||
#include <debug.h>
|
||||
#include <string.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include <nuttx/board.h>
|
||||
|
||||
__BEGIN_DECLS
|
||||
extern void led_init(void);
|
||||
extern void bootloader_led_on(int led);
|
||||
extern void bootloader_led_off(int led);
|
||||
__END_DECLS
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the initialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
__EXPORT void stm32_boardinitialize(void)
|
||||
{
|
||||
putreg32(getreg32(STM32_RCC_APB1ENR) | RCC_APB1ENR_CAN1EN, STM32_RCC_APB1ENR);
|
||||
stm32_configgpio(GPIO_CAN1_RX);
|
||||
stm32_configgpio(GPIO_CAN1_TX);
|
||||
stm32_configgpio(GPIO_CAN1_SILENT_S0);
|
||||
putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
|
||||
putreg32(getreg32(STM32_RCC_APB1RSTR) & ~RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
|
||||
|
||||
led_init();
|
||||
|
||||
#if defined(OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO)
|
||||
stm32_configgpio(GPIO_GETNODEINFO_JUMPER);
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
/************************************************************************************
|
||||
* Name: board_deinitialize
|
||||
*
|
||||
* Description:
|
||||
* This function is called by the bootloader code prior to booting
|
||||
* the application. Is should place the HW into an benign initialized state.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void board_deinitialize(void)
|
||||
{
|
||||
putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_get_product_name
|
||||
*
|
||||
* Description:
|
||||
* Called to retrieve the product name. The returned value is a assumed
|
||||
* to be written to a pascal style string that will be length prefixed
|
||||
* and not null terminated
|
||||
*
|
||||
* Input Parameters:
|
||||
* product_name - A pointer to a buffer to write the name.
|
||||
* maxlen - The maximum number of charter that can be written
|
||||
*
|
||||
* Returned Value:
|
||||
* The length of characters written to the buffer.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
uint8_t board_get_product_name(uint8_t *product_name, size_t maxlen)
|
||||
{
|
||||
DEBUGASSERT(maxlen > UAVCAN_STRLEN(HW_UAVCAN_NAME));
|
||||
memcpy(product_name, HW_UAVCAN_NAME, UAVCAN_STRLEN(HW_UAVCAN_NAME));
|
||||
return UAVCAN_STRLEN(HW_UAVCAN_NAME);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_get_hardware_version
|
||||
*
|
||||
* Description:
|
||||
* Called to retrieve the hardware version information. The function
|
||||
* will first initialize the the callers struct to all zeros.
|
||||
*
|
||||
* Input Parameters:
|
||||
* hw_version - A pointer to a uavcan_hardwareversion_t.
|
||||
*
|
||||
* Returned Value:
|
||||
* Length of the unique_id
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
size_t board_get_hardware_version(uavcan_HardwareVersion_t *hw_version)
|
||||
{
|
||||
memset(hw_version, 0, sizeof(uavcan_HardwareVersion_t));
|
||||
|
||||
hw_version->major = HW_VERSION_MAJOR;
|
||||
hw_version->minor = HW_VERSION_MINOR;
|
||||
|
||||
return board_get_mfguid(*(mfguid_t *) hw_version->unique_id);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_indicate
|
||||
*
|
||||
* Description:
|
||||
* Provides User feedback to indicate the state of the bootloader
|
||||
* on board specific hardware.
|
||||
*
|
||||
* Input Parameters:
|
||||
* indication - A member of the uiindication_t
|
||||
*
|
||||
* Returned Value:
|
||||
* None
|
||||
*
|
||||
****************************************************************************/
|
||||
void board_indicate(uiindication_t indication)
|
||||
{
|
||||
if (indication == off) {
|
||||
bootloader_led_off(GPIO_nLED_RED);
|
||||
bootloader_led_off(GPIO_nLED_BLUE);
|
||||
|
||||
} else if (indication == fw_update_start) {
|
||||
bootloader_led_on(GPIO_nLED_RED);
|
||||
bootloader_led_on(GPIO_nLED_BLUE);
|
||||
|
||||
} else if ((indication == fw_update_erase_fail) || (indication == fw_update_invalid_response)
|
||||
|| (indication == fw_update_timeout) || (indication == fw_update_invalid_crc)) {
|
||||
bootloader_led_on(GPIO_nLED_RED);
|
||||
bootloader_led_off(GPIO_nLED_BLUE);
|
||||
|
||||
} else if (indication == allocation_start) {
|
||||
bootloader_led_on(GPIO_nLED_RED);
|
||||
bootloader_led_off(GPIO_nLED_BLUE);
|
||||
|
||||
} else {
|
||||
bootloader_led_off(GPIO_nLED_RED);
|
||||
bootloader_led_on(GPIO_nLED_BLUE);
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,110 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2021 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/*
|
||||
* @file boot_config.h
|
||||
*
|
||||
* bootloader definitions that configures the behavior and options
|
||||
* of the Boot loader
|
||||
* This file is relies on the parent folder's boot_config.h file and defines
|
||||
* different usages of the hardware for bootloading
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
/* Bring in the board_config.h definitions
|
||||
* todo:make this be pulled in from a targed's build
|
||||
* files in nuttx*/
|
||||
|
||||
#include "board_config.h"
|
||||
#include "uavcan.h"
|
||||
#include <nuttx/compiler.h>
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#include <stm32_flash.h>
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
#define OPT_PREFERRED_NODE_ID ANY_NODE_ID
|
||||
|
||||
//todo:wrap OPT_x in in ifdefs for command line definitions
|
||||
#define OPT_TBOOT_MS 3000
|
||||
#define OPT_NODE_STATUS_RATE_MS 800
|
||||
#define OPT_NODE_INFO_RATE_MS 50
|
||||
#define OPT_BL_NUMBER_TIMERS 7
|
||||
|
||||
// No GETNODEINFO
|
||||
#define OPT_WAIT_FOR_GETNODEINFO 0
|
||||
#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO 0
|
||||
#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT 0
|
||||
|
||||
#define OPT_ENABLE_WD 1
|
||||
|
||||
#define OPT_RESTART_TIMEOUT_MS 20000
|
||||
|
||||
/* Reserved for the Booloader */
|
||||
#define OPT_BOOTLOADER_SIZE_IN_K (1024*64)
|
||||
|
||||
/* Reserved for the application out of the total
|
||||
* system flash minus the BOOTLOADER_SIZE_IN_K
|
||||
*/
|
||||
#define OPT_APPLICATION_RESERVER_IN_K 0
|
||||
|
||||
#define OPT_APPLICATION_IMAGE_OFFSET OPT_BOOTLOADER_SIZE_IN_K
|
||||
#define OPT_APPLICATION_IMAGE_LENGTH (FLASH_SIZE-(OPT_BOOTLOADER_SIZE_IN_K+OPT_APPLICATION_RESERVER_IN_K))
|
||||
|
||||
|
||||
#define FLASH_BASE STM32_FLASH_BASE
|
||||
#define FLASH_SIZE STM32_FLASH_SIZE
|
||||
|
||||
#define APPLICATION_LOAD_ADDRESS (FLASH_BASE + OPT_APPLICATION_IMAGE_OFFSET)
|
||||
#define APPLICATION_SIZE (FLASH_SIZE-OPT_APPLICATION_IMAGE_OFFSET)
|
||||
#define APPLICATION_LAST_8BIT_ADDRRESS ((uint8_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint8_t)))
|
||||
#define APPLICATION_LAST_32BIT_ADDRRESS ((uint32_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint32_t)))
|
||||
#define APPLICATION_LAST_64BIT_ADDRRESS ((uint64_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint64_t)))
|
||||
|
||||
/* If this board uses big flash that have large sectors */
|
||||
|
||||
#define OPT_USE_YIELD
|
||||
|
||||
/* Bootloader Option*****************************************************************
|
||||
*
|
||||
*/
|
||||
//#define GPIO_GETNODEINFO_JUMPER GPIO_NOPT_WAIT_FOR_GETNODEINFO
|
||||
@@ -0,0 +1,130 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (C) 2021 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file can.c
|
||||
*
|
||||
* Board-specific CAN functions.
|
||||
*/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <px4_platform_common/px4_config.h>
|
||||
|
||||
#include <errno.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/can/can.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "chip.h"
|
||||
#include "arm_internal.h"
|
||||
|
||||
#include "stm32.h"
|
||||
#include "stm32_can.h"
|
||||
#include "board_config.h"
|
||||
|
||||
#ifdef CONFIG_CAN
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
/* Configuration ********************************************************************/
|
||||
|
||||
#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
|
||||
# warning "Both CAN1 and CAN2 are enabled. Assuming only CAN1."
|
||||
# undef CONFIG_STM32_CAN2
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_CAN1
|
||||
# define CAN_PORT 1
|
||||
#else
|
||||
# define CAN_PORT 2
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
int can_devinit(void);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: can_devinit
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following interface to work with
|
||||
* examples/can.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
int can_devinit(void)
|
||||
{
|
||||
static bool initialized = false;
|
||||
struct can_dev_s *can;
|
||||
int ret;
|
||||
|
||||
/* Check if we have already initialized */
|
||||
|
||||
if (!initialized) {
|
||||
/* Call stm32_caninitialize() to get an instance of the CAN interface */
|
||||
|
||||
can = stm32_caninitialize(CAN_PORT);
|
||||
|
||||
if (can == NULL) {
|
||||
canerr("ERROR: Failed to get CAN interface\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* Register the CAN driver at "/dev/can0" */
|
||||
|
||||
ret = can_register("/dev/can0", can);
|
||||
|
||||
if (ret < 0) {
|
||||
canerr("ERROR: can_register failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* Now we are initialized */
|
||||
|
||||
initialized = true;
|
||||
}
|
||||
|
||||
return OK;
|
||||
}
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,161 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2024 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file init.c
|
||||
*
|
||||
* board specific early startup code. This file implements the
|
||||
* board_app_initialize() function that is called early by nsh during startup.
|
||||
*
|
||||
* Code here is run before the rcS script is invoked; it should start required
|
||||
* subsystems and perform board-specific initialization.
|
||||
*/
|
||||
|
||||
#include <px4_platform_common/px4_config.h>
|
||||
#include <px4_platform_common/tasks.h>
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
#include <debug.h>
|
||||
#include <errno.h>
|
||||
#include <syslog.h>
|
||||
|
||||
#include <nuttx/board.h>
|
||||
|
||||
#include <stm32.h>
|
||||
#include "board_config.h"
|
||||
#include <stm32_uart.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include <drivers/drv_hrt.h>
|
||||
#include <drivers/drv_board_led.h>
|
||||
#include <drivers/drv_watchdog.h>
|
||||
|
||||
#include <systemlib/px4_macros.h>
|
||||
|
||||
#include <px4_platform_common/init.h>
|
||||
|
||||
# if defined(FLASH_BASED_PARAMS)
|
||||
# include <parameters/flashparams/flashfs.h>
|
||||
#endif
|
||||
|
||||
__BEGIN_DECLS
|
||||
extern void led_init(void);
|
||||
extern void led_on(int led);
|
||||
extern void led_off(int led);
|
||||
__END_DECLS
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the initialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
__EXPORT void stm32_boardinitialize(void)
|
||||
{
|
||||
watchdog_init();
|
||||
|
||||
// Configure CAN interface
|
||||
stm32_configgpio(GPIO_CAN1_RX);
|
||||
stm32_configgpio(GPIO_CAN1_TX);
|
||||
|
||||
stm32_configgpio(GPIO_CAN1_SILENT_S0);
|
||||
|
||||
// Configure SPI all interfaces GPIO & enable power.
|
||||
stm32_spiinitialize();
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_app_initialize
|
||||
*
|
||||
* Description:
|
||||
* Perform application specific initialization. This function is never
|
||||
* called directly from application code, but only indirectly via the
|
||||
* (non-standard) boardctl() interface using the command BOARDIOC_INIT.
|
||||
*
|
||||
* Input Parameters:
|
||||
* arg - The boardctl() argument is passed to the board_app_initialize()
|
||||
* implementation without modification. The argument has no
|
||||
* meaning to NuttX; the meaning of the argument is a contract
|
||||
* between the board-specific initalization logic and the the
|
||||
* matching application logic. The value cold be such things as a
|
||||
* mode enumeration value, a set of DIP switch switch settings, a
|
||||
* pointer to configuration data read from a file or serial FLASH,
|
||||
* or whatever you would like to do with it. Every implementation
|
||||
* should accept zero/NULL as a default configuration.
|
||||
*
|
||||
* Returned Value:
|
||||
* Zero (OK) is returned on success; a negated errno value is returned on
|
||||
* any failure to indicate the nature of the failure.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
__EXPORT int board_app_initialize(uintptr_t arg)
|
||||
{
|
||||
px4_platform_init();
|
||||
|
||||
// Configure LEDs.
|
||||
board_autoled_initialize();
|
||||
|
||||
#if defined(FLASH_BASED_PARAMS)
|
||||
static sector_descriptor_t params_sector_map[] = {
|
||||
{2, 16 * 1024, 0x08008000},
|
||||
{3, 16 * 1024, 0x0800C000},
|
||||
{0, 0, 0},
|
||||
};
|
||||
|
||||
/* Initialize the flashfs layer to use heap allocated memory */
|
||||
int result = parameter_flashfs_init(params_sector_map, NULL, 0);
|
||||
|
||||
if (result != OK) {
|
||||
syslog(LOG_ERR, "[boot] FAILED to init params in FLASH %d\n", result);
|
||||
}
|
||||
|
||||
#endif // FLASH_BASED_PARAMS
|
||||
|
||||
/* initial LED state */
|
||||
drv_led_start();
|
||||
led_off(LED_RED);
|
||||
led_on(LED_BLUE);
|
||||
|
||||
/* Configure the HW based on the manifest */
|
||||
//px4_platform_configure();
|
||||
|
||||
return OK;
|
||||
}
|
||||
@@ -0,0 +1,115 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2021 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file led.c
|
||||
*
|
||||
* board LED backend.
|
||||
*/
|
||||
|
||||
#include <px4_platform_common/px4_config.h>
|
||||
|
||||
#include <stdbool.h>
|
||||
|
||||
#include "stm32.h"
|
||||
#include "board_config.h"
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
/*
|
||||
* Ideally we'd be able to get these from up_internal.h,
|
||||
* but since we want to be able to disable the NuttX use
|
||||
* of leds for system indication at will and there is no
|
||||
* separate switch, we need to build independent of the
|
||||
* CONFIG_ARCH_LEDS configuration switch.
|
||||
*/
|
||||
__BEGIN_DECLS
|
||||
extern void led_init(void);
|
||||
extern void bootloader_led_on(int led);
|
||||
extern void bootloader_led_off(int led);
|
||||
extern void led_on(int led);
|
||||
extern void led_off(int led);
|
||||
extern void led_toggle(int led);
|
||||
__END_DECLS
|
||||
|
||||
# define xlat(p) (p)
|
||||
static uint32_t g_ledmap[] = {
|
||||
GPIO_nLED_BLUE,
|
||||
GPIO_nLED_RED,
|
||||
};
|
||||
|
||||
__EXPORT void led_init(void)
|
||||
{
|
||||
/* Configure LED GPIOs for output */
|
||||
for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) {
|
||||
stm32_configgpio(g_ledmap[l]);
|
||||
}
|
||||
}
|
||||
|
||||
__EXPORT void bootloader_led_on(int led)
|
||||
{
|
||||
/* Pull Down to switch on */
|
||||
stm32_gpiowrite(led, false);
|
||||
}
|
||||
|
||||
__EXPORT void bootloader_led_off(int led)
|
||||
{
|
||||
/* Pull Up to switch on */
|
||||
stm32_gpiowrite(led, true);
|
||||
}
|
||||
|
||||
static void phy_set_led(int led, bool state)
|
||||
{
|
||||
/* Pull Down to switch on */
|
||||
stm32_gpiowrite(g_ledmap[led], !state);
|
||||
}
|
||||
|
||||
static bool phy_get_led(int led)
|
||||
{
|
||||
return !stm32_gpioread(g_ledmap[led]);
|
||||
}
|
||||
|
||||
__EXPORT void led_on(int led)
|
||||
{
|
||||
phy_set_led(xlat(led), true);
|
||||
}
|
||||
|
||||
__EXPORT void led_off(int led)
|
||||
{
|
||||
phy_set_led(xlat(led), false);
|
||||
}
|
||||
|
||||
__EXPORT void led_toggle(int led)
|
||||
{
|
||||
phy_set_led(xlat(led), !phy_get_led(xlat(led)));
|
||||
}
|
||||
@@ -0,0 +1,50 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (C) 2021 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#include <px4_arch/spi_hw_description.h>
|
||||
#include <drivers/drv_sensor.h>
|
||||
#include <nuttx/spi/spi.h>
|
||||
|
||||
constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
|
||||
initSPIBus(SPI::Bus::SPI1, {
|
||||
initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortA, GPIO::Pin4}, SPI::DRDY{GPIO::PortA, GPIO::Pin3}),
|
||||
}),
|
||||
initSPIBus(SPI::Bus::SPI2, {
|
||||
initSPIDevice(DRV_FLOW_DEVTYPE_PAA3905, SPI::CS{GPIO::PortB, GPIO::Pin12}),
|
||||
}),
|
||||
initSPIBus(SPI::Bus::SPI3, {
|
||||
initSPIDevice(DRV_DIST_DEVTYPE_AFBRS50, SPI::CS{GPIO::PortA, GPIO::Pin15}),
|
||||
}),
|
||||
};
|
||||
|
||||
static constexpr bool unused = validateSPIConfig(px4_spi_buses);
|
||||
Reference in New Issue
Block a user