mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-11-01 03:41:36 +08:00
Port custom airframe configs / mixers to public fork (#7)
* Port custom airframe configs / mixers to new custom repo This PR ports ethz asl fixedwing team's custom airframe configs and mixers to the PX4 fork * Exclude fmu-v2 for ASL vehicles This commit removes the fmu v2 for ASL vehicles in order to fix the flash overflowing problem
This commit is contained in:
JaeyoungLim
@@ -0,0 +1,51 @@
|
|||||||
|
#!/bin/sh
|
||||||
|
#
|
||||||
|
# @name ASL_EasyGlider
|
||||||
|
#
|
||||||
|
# @type Standard Plane
|
||||||
|
# @class Plane
|
||||||
|
#
|
||||||
|
# @output MAIN1 aileron
|
||||||
|
# @output MAIN2 aileron
|
||||||
|
# @output MAIN3 elevator
|
||||||
|
# @output MAIN4 rudder
|
||||||
|
# @output MAIN5 throttle
|
||||||
|
# @output MAIN6 wheel
|
||||||
|
# @output MAIN7 flaps
|
||||||
|
#
|
||||||
|
# @output AUX1 feed-through of RC AUX1 channel
|
||||||
|
# @output AUX2 feed-through of RC AUX2 channel
|
||||||
|
# @output AUX3 feed-through of RC AUX3 channel
|
||||||
|
#
|
||||||
|
# @maintainer Philipp Oettershagen <philipp.oettershagen@mavt.ethz.ch>
|
||||||
|
#
|
||||||
|
# @board px4_fmu-v2 exclude
|
||||||
|
# @board bitcraze_crazyflie exclude
|
||||||
|
#
|
||||||
|
|
||||||
|
. ${R}etc/init.d/rc.fw_defaults
|
||||||
|
|
||||||
|
if [ $AUTOCNF == yes ]
|
||||||
|
then
|
||||||
|
param set FW_AIRSPD_MIN 10
|
||||||
|
param set FW_AIRSPD_TRIM 15
|
||||||
|
param set FW_AIRSPD_MAX 20
|
||||||
|
|
||||||
|
param set FW_MAN_P_MAX 45
|
||||||
|
param set FW_MAN_R_MAX 45
|
||||||
|
param set FW_R_LIM 45
|
||||||
|
|
||||||
|
param set FW_WR_FF 0.2
|
||||||
|
param set FW_WR_I 0.2
|
||||||
|
param set FW_WR_IMAX 0.8
|
||||||
|
param set FW_WR_P 1
|
||||||
|
param set FW_W_RMAX 0
|
||||||
|
|
||||||
|
# set disarmed value for the ESC
|
||||||
|
param set PWM_DISARMED 1000
|
||||||
|
fi
|
||||||
|
|
||||||
|
set MIXER asl_easyglider
|
||||||
|
|
||||||
|
# use PWM parameters for throttle channel
|
||||||
|
set PWM_OUT 5
|
||||||
@@ -0,0 +1,52 @@
|
|||||||
|
#!/bin/sh
|
||||||
|
#
|
||||||
|
# @name ASL_Techpod
|
||||||
|
#
|
||||||
|
# @type Plane A-Tail
|
||||||
|
# @class Plane
|
||||||
|
#
|
||||||
|
# @output MAIN1 aileron right
|
||||||
|
# @output MAIN2 aileron left
|
||||||
|
# @output MAIN3 v-tail right
|
||||||
|
# @output MAIN4 v-tail left
|
||||||
|
# @output MAIN5 throttle
|
||||||
|
# @output MAIN6 wheel
|
||||||
|
# @output MAIN7 flaps right
|
||||||
|
# @output MAIN8 flaps left
|
||||||
|
#
|
||||||
|
# @output AUX1 feed-through of RC AUX1 channel
|
||||||
|
# @output AUX2 feed-through of RC AUX2 channel
|
||||||
|
# @output AUX3 feed-through of RC AUX3 channel
|
||||||
|
#
|
||||||
|
# @maintainer Philipp Oettershagen <philipp.oettershagen@mavt.ethz.ch>
|
||||||
|
#
|
||||||
|
# @board px4_fmu-v2 exclude
|
||||||
|
# @board bitcraze_crazyflie exclude
|
||||||
|
#
|
||||||
|
|
||||||
|
. ${R}etc/init.d/rc.fw_defaults
|
||||||
|
|
||||||
|
if [ $AUTOCNF == yes ]
|
||||||
|
then
|
||||||
|
param set FW_AIRSPD_MIN 10
|
||||||
|
param set FW_AIRSPD_TRIM 15
|
||||||
|
param set FW_AIRSPD_MAX 20
|
||||||
|
|
||||||
|
param set FW_MAN_P_MAX 55
|
||||||
|
param set FW_MAN_R_MAX 55
|
||||||
|
param set FW_R_LIM 55
|
||||||
|
|
||||||
|
param set FW_WR_FF 0.2
|
||||||
|
param set FW_WR_I 0.2
|
||||||
|
param set FW_WR_IMAX 0.8
|
||||||
|
param set FW_WR_P 1
|
||||||
|
param set FW_W_RMAX 0
|
||||||
|
|
||||||
|
# set disarmed value for the ESC
|
||||||
|
param set PWM_DISARMED 1000
|
||||||
|
fi
|
||||||
|
|
||||||
|
set MIXER asl_techpod
|
||||||
|
|
||||||
|
# use PWM parameters for throttle channel
|
||||||
|
set PWM_OUT 5
|
||||||
@@ -0,0 +1,52 @@
|
|||||||
|
#!/bin/sh
|
||||||
|
#
|
||||||
|
# @name ASL_SenseSoar2
|
||||||
|
#
|
||||||
|
# @type Plane A-Tail
|
||||||
|
# @class Plane
|
||||||
|
#
|
||||||
|
# @output MAIN1 aileron right
|
||||||
|
# @output MAIN2 aileron left
|
||||||
|
# @output MAIN3 v-tail right
|
||||||
|
# @output MAIN4 v-tail left
|
||||||
|
# @output MAIN5 throttle
|
||||||
|
# @output MAIN6 wheel
|
||||||
|
# @output MAIN7 flaps right
|
||||||
|
# @output MAIN8 flaps left
|
||||||
|
#
|
||||||
|
# @output AUX1 feed-through of RC AUX1 channel
|
||||||
|
# @output AUX2 feed-through of RC AUX2 channel
|
||||||
|
# @output AUX3 feed-through of RC AUX3 channel
|
||||||
|
#
|
||||||
|
# @maintainer Philipp Oettershagen <philipp.oettershagen@mavt.ethz.ch>
|
||||||
|
#
|
||||||
|
# @board px4_fmu-v2 exclude
|
||||||
|
# @board bitcraze_crazyflie exclude
|
||||||
|
#
|
||||||
|
|
||||||
|
. ${R}etc/init.d/rc.fw_defaults
|
||||||
|
|
||||||
|
if [ $AUTOCNF == yes ]
|
||||||
|
then
|
||||||
|
param set FW_AIRSPD_MIN 12
|
||||||
|
param set FW_AIRSPD_TRIM 15
|
||||||
|
param set FW_AIRSPD_MAX 20
|
||||||
|
|
||||||
|
param set FW_MAN_P_MAX 45
|
||||||
|
param set FW_MAN_R_MAX 45
|
||||||
|
param set FW_R_LIM 55
|
||||||
|
|
||||||
|
param set FW_WR_FF 0.2
|
||||||
|
param set FW_WR_I 0.2
|
||||||
|
param set FW_WR_IMAX 0.8
|
||||||
|
param set FW_WR_P 1
|
||||||
|
param set FW_W_RMAX 0
|
||||||
|
|
||||||
|
# set disarmed value for the ESC
|
||||||
|
param set PWM_DISARMED 1000
|
||||||
|
fi
|
||||||
|
|
||||||
|
set MIXER asl_sensoar2
|
||||||
|
|
||||||
|
# use PWM parameters for throttle channel
|
||||||
|
set PWM_OUT 5
|
||||||
@@ -157,6 +157,11 @@ px4_add_romfs_files(
|
|||||||
# [18000, 18999] High-altitude balloons
|
# [18000, 18999] High-altitude balloons
|
||||||
18001_TF-B1
|
18001_TF-B1
|
||||||
|
|
||||||
|
# [22000, 22999] ETHZ ASL Vehicles
|
||||||
|
22000_asl_easyglider
|
||||||
|
22001_asl_techpod
|
||||||
|
22002_asl_sensesoar2
|
||||||
|
|
||||||
24001_dodeca_cox
|
24001_dodeca_cox
|
||||||
|
|
||||||
50000_generic_ground_vehicle
|
50000_generic_ground_vehicle
|
||||||
|
|||||||
@@ -94,4 +94,8 @@ px4_add_romfs_files(
|
|||||||
vtol_delta.aux.mix
|
vtol_delta.aux.mix
|
||||||
vtol_tailsitter_duo.main.mix
|
vtol_tailsitter_duo.main.mix
|
||||||
wingwing.main.mix
|
wingwing.main.mix
|
||||||
|
#ETHZ ASL Custom Mixers
|
||||||
|
asl_easyglider.main.mix
|
||||||
|
asl_sensesoar2.main.mix
|
||||||
|
asl_techpod.main.mix
|
||||||
)
|
)
|
||||||
|
|||||||
@@ -0,0 +1,70 @@
|
|||||||
|
ASL EasyGlider mixer
|
||||||
|
=============================
|
||||||
|
|
||||||
|
Documentation: https://dev.px4.io/en/concept/mixing.html
|
||||||
|
|
||||||
|
Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
|
||||||
|
(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps).
|
||||||
|
|
||||||
|
Motor speed mixer
|
||||||
|
-----------------
|
||||||
|
Two scalers total (output, thrust).
|
||||||
|
|
||||||
|
This mixer generates a full-range output (-1 to 1) from an input in the (0 - 1)
|
||||||
|
range. Inputs below zero are treated as zero.
|
||||||
|
|
||||||
|
M: 1
|
||||||
|
O: 10000 10000 0 -10000 10000
|
||||||
|
S: 0 3 0 20000 -10000 -10000 10000
|
||||||
|
|
||||||
|
Right Aileron mixer
|
||||||
|
---------------------------------
|
||||||
|
|
||||||
|
This mixer assumes that the aileron servos are set up correctly mechanically;
|
||||||
|
depending on the actual configuration it may be necessary to reverse the scaling
|
||||||
|
factors (to reverse the servo movement) and adjust the offset, scaling and
|
||||||
|
endpoints to suit.
|
||||||
|
|
||||||
|
M: 2
|
||||||
|
O: 10000 10000 0 -10000 10000
|
||||||
|
S: 0 0 6000 10000 0 -10000 10000
|
||||||
|
S: 0 4 0 -10000 0 -10000 10000
|
||||||
|
|
||||||
|
Elevator mixer
|
||||||
|
------------
|
||||||
|
Two scalers total (output, roll).
|
||||||
|
|
||||||
|
This mixer assumes that the elevator servo is set up correctly mechanically;
|
||||||
|
depending on the actual configuration it may be necessary to reverse the scaling
|
||||||
|
factors (to reverse the servo movement) and adjust the offset, scaling and
|
||||||
|
endpoints to suit.
|
||||||
|
|
||||||
|
M: 1
|
||||||
|
O: 10000 10000 0 -10000 10000
|
||||||
|
S: 0 1 -10000 -10000 0 -10000 10000
|
||||||
|
|
||||||
|
Rudder mixer
|
||||||
|
------------
|
||||||
|
Two scalers total (output, yaw).
|
||||||
|
|
||||||
|
This mixer assumes that the rudder servo is set up correctly mechanically;
|
||||||
|
depending on the actual configuration it may be necessary to reverse the scaling
|
||||||
|
factors (to reverse the servo movement) and adjust the offset, scaling and
|
||||||
|
endpoints to suit.
|
||||||
|
|
||||||
|
M: 1
|
||||||
|
O: -10000 -10000 0 -10000 10000
|
||||||
|
S: 0 2 10000 10000 0 -10000 10000
|
||||||
|
|
||||||
|
Left Aileron mixer
|
||||||
|
---------------------------------
|
||||||
|
|
||||||
|
This mixer assumes that the aileron servos are set up correctly mechanically;
|
||||||
|
depending on the actual configuration it may be necessary to reverse the scaling
|
||||||
|
factors (to reverse the servo movement) and adjust the offset, scaling and
|
||||||
|
endpoints to suit.
|
||||||
|
|
||||||
|
M: 2
|
||||||
|
O: 10000 10000 0 -10000 10000
|
||||||
|
S: 0 0 -10000 -6000 0 -10000 10000
|
||||||
|
S: 0 4 0 -10000 0 -10000 10000
|
||||||
@@ -0,0 +1,61 @@
|
|||||||
|
ASL SenseSoar2 mixer for PX4IO
|
||||||
|
=============================
|
||||||
|
|
||||||
|
Documentation: https://dev.px4.io/en/concept/mixing.html
|
||||||
|
|
||||||
|
Note1: CH2 AilR is down for pos PWM signal change, CH5 Ail L the other way around.
|
||||||
|
Note2: The mixer defines a certain aileron differential, but the phyiscal differential
|
||||||
|
is stronger because of the servo mechanics (70% mixer diff -> ca. 60% physical).
|
||||||
|
Note3: In the extras.txt on the sd-card, set pwm min/max such that the ailerons have
|
||||||
|
2.5cm upwards and 2.0cm downwards travel at FULL (u=+/- 1.0) mixer output. The
|
||||||
|
downwards travel with the mixer differential is then obviously less.
|
||||||
|
|
||||||
|
=============================
|
||||||
|
|
||||||
|
### Motor
|
||||||
|
M: 1
|
||||||
|
O: 10000 10000 0 -10000 10000
|
||||||
|
S: 0 3 0 20000 -10000 -10000 10000
|
||||||
|
|
||||||
|
|
||||||
|
### Right aileron (with differential)
|
||||||
|
M: 1
|
||||||
|
O: 10000 10000 0 -10000 10000
|
||||||
|
S: 0 0 -7000 -10000 0 -10000 10000
|
||||||
|
|
||||||
|
|
||||||
|
### Right ruddervator
|
||||||
|
M: 2
|
||||||
|
O: 6000 6000 0 -10000 10000
|
||||||
|
S: 0 1 -6500 -6500 0 -10000 10000
|
||||||
|
S: 0 2 7500 7500 0 -10000 10000
|
||||||
|
|
||||||
|
|
||||||
|
### Left ruddervator
|
||||||
|
M: 2
|
||||||
|
O: 6000 6000 0 -10000 10000
|
||||||
|
S: 0 1 6500 6500 0 -10000 10000
|
||||||
|
S: 0 2 7500 7500 0 -10000 10000
|
||||||
|
|
||||||
|
|
||||||
|
### Left aileron (with differential)
|
||||||
|
M: 1
|
||||||
|
O: 10000 10000 0 -10000 10000
|
||||||
|
S: 0 0 -10000 -7000 0 -10000 10000
|
||||||
|
|
||||||
|
|
||||||
|
### Right flap
|
||||||
|
#M: 1
|
||||||
|
#O: 10000 10000 0 -10000 4000
|
||||||
|
#S: 3 4 10000 10000 0 -10000 10000
|
||||||
|
|
||||||
|
### Right flap
|
||||||
|
M: 1
|
||||||
|
O: 10000 10000 0 -10000 4000
|
||||||
|
S: 0 4 0 20000 -10000 -10000 10000
|
||||||
|
|
||||||
|
|
||||||
|
### Left flap
|
||||||
|
M: 1
|
||||||
|
O: 10000 10000 0 -4000 10000
|
||||||
|
S: 0 4 0 -20000 10000 -10000 10000
|
||||||
@@ -0,0 +1,47 @@
|
|||||||
|
ASL Techpod mixer for PX4IO
|
||||||
|
=============================
|
||||||
|
|
||||||
|
Documentation: https://dev.px4.io/en/concept/mixing.html
|
||||||
|
|
||||||
|
=============================
|
||||||
|
|
||||||
|
### Motor
|
||||||
|
M: 1
|
||||||
|
O: 10000 10000 0 -10000 10000
|
||||||
|
S: 0 3 0 20000 -10000 -10000 10000
|
||||||
|
|
||||||
|
|
||||||
|
### Right aileron (with differential)
|
||||||
|
M: 1
|
||||||
|
O: 10000 10000 0 -10000 10000
|
||||||
|
S: 0 0 -7500 -10000 0 -10000 10000
|
||||||
|
|
||||||
|
|
||||||
|
### Elevator
|
||||||
|
M: 1
|
||||||
|
O: 6000 6000 0 -10000 10000
|
||||||
|
S: 0 1 6000 6000 0 -6000 6000
|
||||||
|
|
||||||
|
|
||||||
|
### Rudder
|
||||||
|
M: 1
|
||||||
|
O: 10000 10000 0 -10000 10000
|
||||||
|
S: 0 2 -6000 -6000 0 -6000 6000
|
||||||
|
|
||||||
|
|
||||||
|
### Left aileron (with differential)
|
||||||
|
M: 1
|
||||||
|
O: 10000 10000 0 -10000 10000
|
||||||
|
S: 0 0 -10000 -7500 0 -10000 10000
|
||||||
|
|
||||||
|
|
||||||
|
### Right flap
|
||||||
|
M: 1
|
||||||
|
O: 10000 10000 0 -10000 10000
|
||||||
|
S: 0 4 10000 10000 0 -4000 4000
|
||||||
|
|
||||||
|
|
||||||
|
### Left flap
|
||||||
|
M: 1
|
||||||
|
O: 10000 10000 0 -10000 10000
|
||||||
|
S: 0 4 10000 10000 0 -4000 4000
|
||||||
Reference in New Issue
Block a user