mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-10-21 05:43:34 +08:00
Initial build for Crazyflie 2.0
Working crazyflie firmware build * Console on USART3 * Could not disable building PX4IO firmware, currently commented out Don't build PX4IO firmware if the board doesn't ask for it Added crazyflie motor driver Fixed wrong register CLK_SEL is in PWR_MGMT_1 Initial I2C/SPI MPU9250 device * Tested with I2C * Need to add error checking * Intermittent crash on stop call Working ak8963 mag driver Functional lps25h driver. Work in progress. Works well enough to probe and allow sensors task to start. Added serial port test module HACK! Get sensors module working Set crazyflie PWM range Extend baudrate for Crazyflie's NRF radio Added dummy tone alarm to allow for init Added autostart script for Crazyflie
This commit is contained in:
Tim Dyer
@@ -37,10 +37,10 @@ px4_add_module(
|
||||
SRCS
|
||||
../common/board_name.c
|
||||
aerocore_init.c
|
||||
aerocore_pwm_servo.c
|
||||
aerocore_timer_config.c
|
||||
aerocore_spi.c
|
||||
aerocore_led.c
|
||||
DEPENDS
|
||||
platforms__common
|
||||
)
|
||||
# vim: set noet ft=cmake fenc=utf-8 ff=unix :
|
||||
# vim: set noet ft=cmake fenc=utf-8 ff=unix :
|
||||
|
||||
@@ -0,0 +1,43 @@
|
||||
############################################################################
|
||||
#
|
||||
# Copyright (c) 2015 PX4 Development Team. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name PX4 nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
px4_add_module(
|
||||
MODULE drivers__boards__crazyflie
|
||||
SRCS
|
||||
crazyflie_init.c
|
||||
crazyflie_usb.c
|
||||
crazyflie_led.c
|
||||
crazyflie_timer_config.c
|
||||
DEPENDS
|
||||
platforms__common
|
||||
)
|
||||
# vim: set noet ft=cmake fenc=utf-8 ff=unix :
|
||||
@@ -0,0 +1,181 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2013, 2014 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file board_config.h
|
||||
*
|
||||
* PX4-CRAZYFLIE internal definitions
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
/****************************************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include <nuttx/compiler.h>
|
||||
#include <stdint.h>
|
||||
|
||||
__BEGIN_DECLS
|
||||
|
||||
/* these headers are not C++ safe */
|
||||
#include <stm32.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#define UDID_START 0x1FFF7A10
|
||||
|
||||
/****************************************************************************************************
|
||||
* Definitions
|
||||
****************************************************************************************************/
|
||||
/* Configuration ************************************************************************************/
|
||||
|
||||
/* PX4-STM32F4Discovery GPIOs ***********************************************************************************/
|
||||
/* LEDs */
|
||||
// LED1 green, LED2 orange, LED3 red, LED4 blue
|
||||
|
||||
|
||||
#define GPIO_LED1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
|
||||
GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN0)
|
||||
#define GPIO_LED2 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
|
||||
GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN1)
|
||||
#define GPIO_LED3 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
|
||||
GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN2)
|
||||
#define GPIO_LED4 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
|
||||
GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN3)
|
||||
|
||||
/*
|
||||
* I2C busses
|
||||
*/
|
||||
#define PX4_I2C_BUS_ONBOARD 3
|
||||
#define PX4_I2C_BUS_EXPANSION 1
|
||||
|
||||
#define PX4_I2C_BUS_ONBOARD_HZ 400000
|
||||
#define PX4_I2C_BUS_EXPANSION_HZ 400000
|
||||
|
||||
|
||||
|
||||
/* Devices on the onboard bus.
|
||||
*
|
||||
* Note that these are unshifted addresses.
|
||||
*/
|
||||
#define PX4_I2C_OBDEV_MPU9250 0x69
|
||||
|
||||
/* USB OTG FS
|
||||
*
|
||||
* PA9 OTG_FS_VBUS VBUS sensing
|
||||
*/
|
||||
#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTA|GPIO_PIN9)
|
||||
|
||||
/*
|
||||
* ADC channels
|
||||
*
|
||||
* These are the channel numbers of the ADCs of the microcontroller that can be used by the Px4 Firmware in the adc driver
|
||||
*/
|
||||
#define ADC_CHANNELS 0
|
||||
|
||||
// ADC defines to be used in sensors.cpp to read from a particular channel
|
||||
// Crazyflie 2 performs battery sensing via the NRF module
|
||||
#define ADC_BATTERY_VOLTAGE_CHANNEL ((uint8_t)(-1))
|
||||
#define ADC_BATTERY_CURRENT_CHANNEL ((uint8_t)(-1))
|
||||
#define ADC_AIRSPEED_VOLTAGE_CHANNEL ((uint8_t)(-1))
|
||||
|
||||
/* PWM
|
||||
*
|
||||
* Four PWM motor outputs are configured.
|
||||
*
|
||||
* Pins:
|
||||
*
|
||||
* CH1 : PA1 : TIM2_CH2
|
||||
* CH2 : PB11 : TIM2_CH4
|
||||
* CH3 : PA15 : TIM2_CH1
|
||||
* CH4 : PB9 : TIM4_CH4
|
||||
*/
|
||||
|
||||
#define GPIO_TIM2_CH2OUT GPIO_TIM2_CH2OUT_1
|
||||
#define GPIO_TIM2_CH4OUT GPIO_TIM2_CH4OUT_2
|
||||
#define GPIO_TIM2_CH1OUT GPIO_TIM2_CH1OUT_2
|
||||
#define GPIO_TIM4_CH4OUT GPIO_TIM4_CH4OUT_1
|
||||
|
||||
/* High-resolution timer */
|
||||
#define HRT_TIMER 8 /* use timer8 for the HRT */
|
||||
#define HRT_TIMER_CHANNEL 1 /* use capture/compare channel */
|
||||
|
||||
/****************************************************************************************************
|
||||
* Public Types
|
||||
****************************************************************************************************/
|
||||
|
||||
/****************************************************************************************************
|
||||
* Public data
|
||||
****************************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/****************************************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************************************/
|
||||
|
||||
/****************************************************************************************************
|
||||
* Name: stm32_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the PX4FMU board.
|
||||
*
|
||||
****************************************************************************************************/
|
||||
|
||||
extern void stm32_spiinitialize(void);
|
||||
|
||||
extern void stm32_usbinitialize(void);
|
||||
|
||||
/****************************************************************************
|
||||
* Name: nsh_archinitialize
|
||||
*
|
||||
* Description:
|
||||
* Perform architecture specific initialization for NSH.
|
||||
*
|
||||
* CONFIG_NSH_ARCHINIT=y :
|
||||
* Called from the NSH library
|
||||
*
|
||||
* CONFIG_BOARD_INITIALIZE=y, CONFIG_NSH_LIBRARY=y, &&
|
||||
* CONFIG_NSH_ARCHINIT=n :
|
||||
* Called from board_initialize().
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_NSH_LIBRARY
|
||||
int nsh_archinitialize(void);
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
|
||||
__END_DECLS
|
||||
@@ -0,0 +1,65 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2016 PX4 Development Team. All rights reserved.
|
||||
* Author: David Sidrane <david_s5@nscdg.com>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file crazyflie_i2c.c
|
||||
*
|
||||
* Crazyflie I2C configuration
|
||||
*/
|
||||
|
||||
#include <px4_config.h>
|
||||
|
||||
|
||||
#include "board_config.h"
|
||||
#include <arch/board/board.h>
|
||||
#include <drivers/device/i2c.h>
|
||||
/****************************************************************************
|
||||
* Name: board_i2c_initialize
|
||||
*
|
||||
* Description:
|
||||
* Called to set I2C bus frequncies.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
int board_i2c_initialize(void)
|
||||
{
|
||||
|
||||
int ret = device::I2C::set_bus_clock(PX4_I2C_BUS_ONBOARD, PX4_I2C_BUS_ONBOARD_HZ);
|
||||
|
||||
if (ret == OK) {
|
||||
ret = device::I2C::set_bus_clock(PX4_I2C_BUS_EXPANSION, PX4_I2C_BUS_EXPANSION_HZ);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
@@ -0,0 +1,188 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (C) 2012 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file crazyflie_init.c
|
||||
*
|
||||
* Crazyflie specific early startup code. This file implements the
|
||||
* nsh_archinitialize() function that is called early by nsh during startup.
|
||||
*
|
||||
* Code here is run before the rcS script is invoked; it should start required
|
||||
* subsystems and perform board-specific initialisation.
|
||||
*/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <stdio.h>
|
||||
#include <debug.h>
|
||||
#include <errno.h>
|
||||
|
||||
#include <nuttx/arch.h>
|
||||
#include <nuttx/spi.h>
|
||||
#include <nuttx/i2c.h>
|
||||
#include <nuttx/sdio.h>
|
||||
#include <nuttx/mmcsd.h>
|
||||
#include <nuttx/analog/adc.h>
|
||||
#include <nuttx/gran.h>
|
||||
|
||||
#include <stm32.h>
|
||||
#include "board_config.h"
|
||||
#include <stm32_uart.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include <drivers/drv_hrt.h>
|
||||
#include <drivers/drv_led.h>
|
||||
|
||||
#include <systemlib/cpuload.h>
|
||||
#include <systemlib/perf_counter.h>
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-Processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/* Configuration ************************************************************/
|
||||
|
||||
/* Debug ********************************************************************/
|
||||
|
||||
#ifdef CONFIG_CPP_HAVE_VARARGS
|
||||
# ifdef CONFIG_DEBUG
|
||||
# define message(...) lowsyslog(__VA_ARGS__)
|
||||
# else
|
||||
# define message(...) printf(__VA_ARGS__)
|
||||
# endif
|
||||
#else
|
||||
# ifdef CONFIG_DEBUG
|
||||
# define message lowsyslog
|
||||
# else
|
||||
# define message printf
|
||||
# endif
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Protected Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the intitialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
__EXPORT void
|
||||
stm32_boardinitialize(void)
|
||||
{
|
||||
/* configure LEDs */
|
||||
up_ledinit();
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: nsh_archinitialize
|
||||
*
|
||||
* Description:
|
||||
* Perform architecture specific initialization
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#include <math.h>
|
||||
|
||||
#if 0
|
||||
#ifdef __cplusplus
|
||||
__EXPORT int matherr(struct __exception *e)
|
||||
{
|
||||
return 1;
|
||||
}
|
||||
#else
|
||||
__EXPORT int matherr(struct exception *e)
|
||||
{
|
||||
return 1;
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
||||
__EXPORT int nsh_archinitialize(void)
|
||||
{
|
||||
|
||||
/* configure the high-resolution time/callout interface */
|
||||
hrt_init();
|
||||
|
||||
/* configure CPU load estimation */
|
||||
#ifdef CONFIG_SCHED_INSTRUMENTATION
|
||||
cpuload_initialize_once();
|
||||
#endif
|
||||
|
||||
/* set up the serial DMA polling */
|
||||
static struct hrt_call serial_dma_call;
|
||||
struct timespec ts;
|
||||
|
||||
/*
|
||||
* Poll at 1ms intervals for received bytes that have not triggered
|
||||
* a DMA event.
|
||||
*/
|
||||
ts.tv_sec = 0;
|
||||
ts.tv_nsec = 1000000;
|
||||
|
||||
hrt_call_every(&serial_dma_call,
|
||||
ts_to_abstime(&ts),
|
||||
ts_to_abstime(&ts),
|
||||
(hrt_callout)stm32_serial_dma_poll,
|
||||
NULL);
|
||||
|
||||
|
||||
|
||||
result = board_i2c_initialize();
|
||||
|
||||
// if (result != OK) {
|
||||
// up_ledon(LED_AMBER);
|
||||
// return -ENODEV;
|
||||
// }
|
||||
|
||||
|
||||
|
||||
// TODO: Initialize i2c buses right here
|
||||
|
||||
return OK;
|
||||
}
|
||||
@@ -0,0 +1,96 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2013 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file crazyflie_led.c
|
||||
*
|
||||
* Crazyflie LED backend.
|
||||
*/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdbool.h>
|
||||
|
||||
#include "stm32.h"
|
||||
#include "board_config.h"
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
/*
|
||||
* Ideally we'd be able to get these from up_internal.h,
|
||||
* but since we want to be able to disable the NuttX use
|
||||
* of leds for system indication at will and there is no
|
||||
* separate switch, we need to build independent of the
|
||||
* CONFIG_ARCH_LEDS configuration switch.
|
||||
*/
|
||||
__BEGIN_DECLS
|
||||
extern void led_init(void);
|
||||
extern void led_on(int led);
|
||||
extern void led_off(int led);
|
||||
extern void led_toggle(int led);
|
||||
__END_DECLS
|
||||
|
||||
__EXPORT void led_init()
|
||||
{
|
||||
/* Configure LED1 GPIO for output */
|
||||
|
||||
stm32_configgpio(GPIO_LED1);
|
||||
}
|
||||
|
||||
__EXPORT void led_on(int led)
|
||||
{
|
||||
if (led == 1) {
|
||||
/* Pull down to switch on */
|
||||
stm32_gpiowrite(GPIO_LED1, false);
|
||||
}
|
||||
}
|
||||
|
||||
__EXPORT void led_off(int led)
|
||||
{
|
||||
if (led == 1) {
|
||||
/* Pull up to switch off */
|
||||
stm32_gpiowrite(GPIO_LED1, true);
|
||||
}
|
||||
}
|
||||
|
||||
__EXPORT void led_toggle(int led)
|
||||
{
|
||||
if (led == 1) {
|
||||
if (stm32_gpioread(GPIO_LED1)) {
|
||||
stm32_gpiowrite(GPIO_LED1, false);
|
||||
|
||||
} else {
|
||||
stm32_gpiowrite(GPIO_LED1, true);
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,109 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (C) 2016 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/*
|
||||
* @file crazyflie_timer_config.c
|
||||
*
|
||||
* Configuration data for the stm32 pwm_servo driver.
|
||||
*
|
||||
* Note that these arrays must always be fully-sized.
|
||||
*/
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#include <stm32.h>
|
||||
#include <stm32_gpio_out.h>
|
||||
#include <stm32_tim.h>
|
||||
|
||||
#include <drivers/stm32/drv_io_timer.h>
|
||||
#include <drivers/drv_pwm_output.h>
|
||||
|
||||
#include "board_config.h"
|
||||
|
||||
__EXPORT const io_timers_t io_timers[MAX_IO_TIMERS] = {
|
||||
{
|
||||
.base = STM32_TIM2_BASE,
|
||||
.clock_register = STM32_RCC_APB1ENR,
|
||||
.clock_bit = RCC_APB1ENR_TIM2EN,
|
||||
.clock_freq = STM32_APB1_TIM2_CLKIN
|
||||
.first_channel_index = 0,
|
||||
.last_channel_index = 2,
|
||||
.handler = io_timer_handler0,
|
||||
.vectorno = STM32_IRQ_TIM2,
|
||||
},
|
||||
{
|
||||
.base = STM32_TIM4_BASE,
|
||||
.clock_register = STM32_RCC_APB1ENR,
|
||||
.clock_bit = RCC_APB1ENR_TIM4EN,
|
||||
.clock_freq = STM32_APB1_TIM4_CLKIN
|
||||
.first_channel_index = 3,
|
||||
.last_channel_index = 3,
|
||||
.handler = io_timer_handler1,
|
||||
.vectorno = STM32_IRQ_TIM4,
|
||||
}
|
||||
};
|
||||
|
||||
__EXPORT const timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
|
||||
{
|
||||
.gpio_out = GPIO_TIM2_CH2OUT,
|
||||
.gpio_in = GPIO_TIM2_CH2IN,
|
||||
.timer_index = 0,
|
||||
.timer_channel = 2,
|
||||
.ccr_offset = STM32_GTIM_CCR2_OFFSET,
|
||||
.masks = GTIM_SR_CC2IF | GTIM_SR_CC2OF
|
||||
},
|
||||
{
|
||||
.gpio_out = GPIO_TIM2_CH4OUT,
|
||||
.gpio_in = GPIO_TIM2_CH4IN,
|
||||
.timer_index = 0,
|
||||
.timer_channel = 4,
|
||||
.ccr_offset = STM32_GTIM_CCR4_OFFSET,
|
||||
.masks = GTIM_SR_CC4IF | GTIM_SR_CC4OF
|
||||
},
|
||||
{
|
||||
.gpio_out = GPIO_TIM2_CH1OUT,
|
||||
.gpio_in = GPIO_TIM2_CH1IN,
|
||||
.timer_index = 0,
|
||||
.timer_channel = 1,
|
||||
.ccr_offset = STM32_GTIM_CCR1_OFFSET,
|
||||
.masks = GTIM_SR_CC1IF | GTIM_SR_CC1OF
|
||||
},
|
||||
{
|
||||
.gpio_out = GPIO_TIM4_CH4OUT,
|
||||
.gpio_in = GPIO_TIM4_CH4IN,
|
||||
.timer_index = 1,
|
||||
.timer_channel = 4,
|
||||
.ccr_offset = STM32_GTIM_CCR4_OFFSET,
|
||||
.masks = GTIM_SR_CC4IF | GTIM_SR_CC4OF
|
||||
}
|
||||
};
|
||||
@@ -0,0 +1,108 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (C) 2012 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file crazyflie_usb.c
|
||||
*
|
||||
* Board-specific USB functions.
|
||||
*/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <sys/types.h>
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/usb/usbdev.h>
|
||||
#include <nuttx/usb/usbdev_trace.h>
|
||||
|
||||
#include <up_arch.h>
|
||||
#include <stm32.h>
|
||||
#include "board_config.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_usbinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to setup USB-related GPIO pins for the PX4-STM32F4Discovery board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
__EXPORT void stm32_usbinitialize(void)
|
||||
{
|
||||
/* The OTG FS has an internal soft pull-up */
|
||||
|
||||
/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
|
||||
|
||||
#ifdef CONFIG_STM32_OTGFS
|
||||
stm32_configgpio(GPIO_OTGFS_VBUS);
|
||||
/* XXX We only support device mode
|
||||
stm32_configgpio(GPIO_OTGFS_PWRON);
|
||||
stm32_configgpio(GPIO_OTGFS_OVER);
|
||||
*/
|
||||
#endif
|
||||
}
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_usbsuspend
|
||||
*
|
||||
* Description:
|
||||
* Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
|
||||
* used. This function is called whenever the USB enters or leaves suspend mode.
|
||||
* This is an opportunity for the board logic to shutdown clocks, power, etc.
|
||||
* while the USB is suspended.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
|
||||
{
|
||||
ulldbg("resume: %d\n", resume);
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user