mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-10-21 05:43:34 +08:00
Initial build for Crazyflie 2.0
Working crazyflie firmware build * Console on USART3 * Could not disable building PX4IO firmware, currently commented out Don't build PX4IO firmware if the board doesn't ask for it Added crazyflie motor driver Fixed wrong register CLK_SEL is in PWR_MGMT_1 Initial I2C/SPI MPU9250 device * Tested with I2C * Need to add error checking * Intermittent crash on stop call Working ak8963 mag driver Functional lps25h driver. Work in progress. Works well enough to probe and allow sensors task to start. Added serial port test module HACK! Get sensors module working Set crazyflie PWM range Extend baudrate for Crazyflie's NRF radio Added dummy tone alarm to allow for init Added autostart script for Crazyflie
This commit is contained in:
Tim Dyer
@@ -0,0 +1,261 @@
|
||||
/************************************************************************************
|
||||
* configs/crazyflie/include/board.h
|
||||
* include/arch/board/board.h
|
||||
*
|
||||
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __CONFIG_CRAZYFLIE_INCLUDE_BOARD_H
|
||||
#define __CONFIG_CRAZYFLIE_INCLUDE_BOARD_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
# include <stdint.h>
|
||||
#endif
|
||||
|
||||
#include "stm32_rcc.h"
|
||||
#include "stm32_sdio.h"
|
||||
#include "stm32.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* Clocking *************************************************************************/
|
||||
/* The PX4FMU uses a 24MHz crystal connected to the HSE.
|
||||
*
|
||||
* This is the canonical configuration:
|
||||
* System Clock source : PLL (HSE)
|
||||
* SYSCLK(Hz) : 168000000 Determined by PLL configuration
|
||||
* HCLK(Hz) : 168000000 (STM32_RCC_CFGR_HPRE)
|
||||
* AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE)
|
||||
* APB1 Prescaler : 4 (STM32_RCC_CFGR_PPRE1)
|
||||
* APB2 Prescaler : 2 (STM32_RCC_CFGR_PPRE2)
|
||||
* HSE Frequency(Hz) : 24000000 (STM32_BOARD_XTAL)
|
||||
* PLLM : 24 (STM32_PLLCFG_PLLM)
|
||||
* PLLN : 336 (STM32_PLLCFG_PLLN)
|
||||
* PLLP : 2 (STM32_PLLCFG_PLLP)
|
||||
* PLLQ : 7 (STM32_PLLCFG_PLLQ)
|
||||
* Main regulator output voltage : Scale1 mode Needed for high speed SYSCLK
|
||||
* Flash Latency(WS) : 5
|
||||
* Prefetch Buffer : OFF
|
||||
* Instruction cache : ON
|
||||
* Data cache : ON
|
||||
* Require 48MHz for USB OTG FS, : Enabled
|
||||
* SDIO and RNG clock
|
||||
*/
|
||||
|
||||
/* HSI - 16 MHz RC factory-trimmed
|
||||
* LSI - 32 KHz RC
|
||||
* HSE - On-board crystal frequency is 24MHz
|
||||
* LSE - not installed
|
||||
*/
|
||||
|
||||
#define STM32_BOARD_XTAL 8000000ul
|
||||
|
||||
#define STM32_HSI_FREQUENCY 16000000ul
|
||||
#define STM32_LSI_FREQUENCY 32000
|
||||
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
||||
//#define STM32_LSE_FREQUENCY 32768
|
||||
|
||||
/* Main PLL Configuration.
|
||||
*
|
||||
* PLL source is HSE
|
||||
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
|
||||
* = (8,000,000 / 8) * 336
|
||||
* = 336,000,000
|
||||
* SYSCLK = PLL_VCO / PLLP
|
||||
* = 336,000,000 / 2 = 168,000,000
|
||||
* USB OTG FS, SDIO and RNG Clock
|
||||
* = PLL_VCO / PLLQ
|
||||
* = 48,000,000
|
||||
*/
|
||||
|
||||
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(8)
|
||||
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(336)
|
||||
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
|
||||
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(7)
|
||||
|
||||
#define STM32_SYSCLK_FREQUENCY 168000000ul
|
||||
|
||||
/* AHB clock (HCLK) is SYSCLK (168MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
||||
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
|
||||
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
|
||||
|
||||
/* APB1 clock (PCLK1) is HCLK/4 (42MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
|
||||
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
|
||||
|
||||
/* Timers driven from APB1 will be twice PCLK1 */
|
||||
|
||||
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
|
||||
/* APB2 clock (PCLK2) is HCLK/2 (84MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
|
||||
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
||||
|
||||
/* Timers driven from APB2 will be twice PCLK2 */
|
||||
|
||||
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
|
||||
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
|
||||
* otherwise frequency is 2xAPBx.
|
||||
* Note: TIM1,8 are on APB2, others on APB1
|
||||
*/
|
||||
|
||||
#define STM32_TIM18_FREQUENCY (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_TIM27_FREQUENCY (2*STM32_PCLK1_FREQUENCY)
|
||||
|
||||
/* Alternate function pin selections ************************************************/
|
||||
|
||||
/*
|
||||
* UARTs.
|
||||
*
|
||||
*/
|
||||
#define GPIO_USART2_RX GPIO_USART2_RX_1
|
||||
#define GPIO_USART2_TX GPIO_USART2_TX_1
|
||||
|
||||
#define GPIO_USART3_RX GPIO_USART3_RX_2
|
||||
#define GPIO_USART3_TX GPIO_USART3_TX_2
|
||||
|
||||
#define GPIO_USART6_RX GPIO_USART6_RX_1
|
||||
#define GPIO_USART6_TX GPIO_USART6_TX_1
|
||||
|
||||
/* UART DMA configuration for USART6 */
|
||||
#define DMAMAP_USART6_RX DMAMAP_USART6_RX_2
|
||||
|
||||
/*
|
||||
* I2C
|
||||
*
|
||||
* The optional _GPIO configurations allow the I2C driver to manually
|
||||
* reset the bus to clear stuck slaves. They match the pin configuration,
|
||||
* but are normally-high GPIOs.
|
||||
*/
|
||||
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_1
|
||||
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_1
|
||||
#define GPIO_I2C1_SCL_GPIO (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN6)
|
||||
#define GPIO_I2C1_SDA_GPIO (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN7)
|
||||
|
||||
#define GPIO_I2C3_SCL GPIO_I2C3_SCL_1
|
||||
#define GPIO_I2C3_SDA GPIO_I2C3_SDA_1
|
||||
#define GPIO_I2C3_SCL_GPIO (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN8)
|
||||
#define GPIO_I2C3_SDA_GPIO (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN9)
|
||||
|
||||
/*
|
||||
* SPI
|
||||
*
|
||||
* There are sensors on SPI1, and SPI3 is connected to the microSD slot.
|
||||
*/
|
||||
#define GPIO_SPI1_MISO (GPIO_SPI1_MISO_1|GPIO_SPEED_50MHz)
|
||||
#define GPIO_SPI1_MOSI (GPIO_SPI1_MOSI_1|GPIO_SPEED_50MHz)
|
||||
#define GPIO_SPI1_SCK (GPIO_SPI1_SCK_1|GPIO_SPEED_50MHz)
|
||||
|
||||
/* XXX since we allocate the HP work stack from CCM RAM on normal system startup,
|
||||
SPI1 will never run in DMA mode - so we can just give it a random config here.
|
||||
What we really need to do is to make DMA configurable per channel, and always
|
||||
disable it for SPI1. */
|
||||
#define DMACHAN_SPI1_RX DMAMAP_SPI1_RX_1
|
||||
#define DMACHAN_SPI1_TX DMAMAP_SPI1_TX_2
|
||||
|
||||
/************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
#define EXTERN extern "C"
|
||||
extern "C" {
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Function Prototypes
|
||||
************************************************************************************/
|
||||
/************************************************************************************
|
||||
* Name: stm32_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the intitialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
EXTERN void stm32_boardinitialize(void);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_ledinit, stm32_setled, and stm32_setleds
|
||||
*
|
||||
* Description:
|
||||
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board LEDs. If
|
||||
* CONFIG_ARCH_LEDS is not defined, then the following interfacesare available to
|
||||
* control the LEDs from user applications.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef CONFIG_ARCH_LEDS
|
||||
EXTERN void stm32_ledinit(void);
|
||||
EXTERN void stm32_setled(int led, bool ledon);
|
||||
EXTERN void stm32_setleds(uint8_t ledset);
|
||||
#endif
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __CONFIG_CRAZYFLIE_INCLUDE_BOARD_H */
|
||||
@@ -0,0 +1,42 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (C) 2013 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* nsh_romfsetc.h
|
||||
*
|
||||
* This file is a stub for 'make export' purposes; the actual ROMFS
|
||||
* must be supplied by the library client.
|
||||
*/
|
||||
|
||||
extern unsigned char romfs_img[];
|
||||
extern unsigned int romfs_img_len;
|
||||
@@ -0,0 +1,177 @@
|
||||
############################################################################
|
||||
# configs/crazyflie/nsh/Make.defs
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
|
||||
#
|
||||
# We only support building with the ARM bare-metal toolchain from
|
||||
# https://launchpad.net/gcc-arm-embedded on Windows, Linux or Mac OS.
|
||||
#
|
||||
CONFIG_ARMV7M_TOOLCHAIN := GNU_EABI
|
||||
|
||||
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
MAXOPTIMIZATION = -Os
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m4 \
|
||||
-mthumb \
|
||||
-march=armv7e-m \
|
||||
-mfpu=fpv4-sp-d16 \
|
||||
-mfloat-abi=hard
|
||||
|
||||
|
||||
# enable precise stack overflow tracking
|
||||
ifeq ($(CONFIG_ARMV7M_STACKCHECK),y)
|
||||
INSTRUMENTATIONDEFINES = -finstrument-functions -ffixed-r10
|
||||
endif
|
||||
|
||||
# pull in *just* libm from the toolchain ... this is grody
|
||||
LIBM = "${shell $(CC) $(ARCHCPUFLAGS) -print-file-name=libm.a}"
|
||||
EXTRA_LIBS += $(LIBM)
|
||||
|
||||
# use our linker script
|
||||
LDSCRIPT = ld.script
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
|
||||
else
|
||||
ifeq ($(PX4_WINTOOL),y)
|
||||
# Windows-native toolchains (MSYS)
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
|
||||
endif
|
||||
endif
|
||||
|
||||
# tool versions
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
# optimisation flags
|
||||
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) \
|
||||
-fno-strict-aliasing \
|
||||
-fno-strength-reduce \
|
||||
-fomit-frame-pointer \
|
||||
-funsafe-math-optimizations \
|
||||
-fno-builtin-printf \
|
||||
-ffunction-sections \
|
||||
-fdata-sections
|
||||
|
||||
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
|
||||
ARCHOPTIMIZATION += -g
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -std=gnu99
|
||||
ARCHCXXFLAGS = -fno-exceptions -fno-rtti -std=gnu++0x
|
||||
ARCHWARNINGS = -Wall \
|
||||
-Wno-sign-compare \
|
||||
-Wextra \
|
||||
-Wdouble-promotion \
|
||||
-Wshadow \
|
||||
-Wframe-larger-than=1024 \
|
||||
-Wpointer-arith \
|
||||
-Wlogical-op \
|
||||
-Wpacked \
|
||||
-Wno-unused-parameter
|
||||
# -Wcast-qual - generates spurious noreturn attribute warnings, try again later
|
||||
# -Wconversion - would be nice, but too many "risky-but-safe" conversions in the code
|
||||
# -Wcast-align - would help catch bad casts in some cases, but generates too many false positives
|
||||
|
||||
ARCHCWARNINGS = $(ARCHWARNINGS) \
|
||||
-Wbad-function-cast \
|
||||
-Wstrict-prototypes \
|
||||
-Wold-style-declaration \
|
||||
-Wmissing-parameter-type \
|
||||
-Wnested-externs
|
||||
ARCHWARNINGSXX = $(ARCHWARNINGS) \
|
||||
-Wno-psabi
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
# this seems to be the only way to add linker flags
|
||||
EXTRA_LIBS += --warn-common \
|
||||
--gc-sections
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHCWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -fno-common
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
|
||||
# produce partially-linked $1 from files in $2
|
||||
define PRELINK
|
||||
@echo "PRELINK: $1"
|
||||
$(Q) $(LD) -Ur -o $1 $2 && $(OBJCOPY) --localize-hidden $1
|
||||
endef
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
@@ -0,0 +1,52 @@
|
||||
############################################################################
|
||||
# configs/crazyflie/nsh/appconfig
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
# Path to example in apps/examples containing the user_start entry point
|
||||
|
||||
CONFIGURED_APPS += examples/nsh
|
||||
|
||||
# The NSH application library
|
||||
CONFIGURED_APPS += nshlib
|
||||
CONFIGURED_APPS += system/readline
|
||||
|
||||
ifeq ($(CONFIG_CAN),y)
|
||||
#CONFIGURED_APPS += examples/can
|
||||
endif
|
||||
|
||||
#ifeq ($(CONFIG_USBDEV),y)
|
||||
#ifeq ($(CONFIG_CDCACM),y)
|
||||
CONFIGURED_APPS += examples/cdcacm
|
||||
#endif
|
||||
#endif
|
||||
@@ -0,0 +1,919 @@
|
||||
#
|
||||
# Automatically generated file; DO NOT EDIT.
|
||||
# Nuttx/ Configuration
|
||||
#
|
||||
CONFIG_NUTTX_NEWCONFIG=y
|
||||
|
||||
#
|
||||
# Build Setup
|
||||
#
|
||||
# CONFIG_EXPERIMENTAL is not set
|
||||
# CONFIG_HOST_LINUX is not set
|
||||
CONFIG_HOST_OSX=y
|
||||
# CONFIG_HOST_WINDOWS is not set
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
|
||||
#
|
||||
# Build Configuration
|
||||
#
|
||||
CONFIG_APPS_DIR="../apps"
|
||||
# CONFIG_BUILD_2PASS is not set
|
||||
|
||||
#
|
||||
# Binary Output Formats
|
||||
#
|
||||
# CONFIG_RRLOAD_BINARY is not set
|
||||
# CONFIG_INTELHEX_BINARY is not set
|
||||
# CONFIG_MOTOROLA_SREC is not set
|
||||
CONFIG_RAW_BINARY=y
|
||||
|
||||
#
|
||||
# Customize Header Files
|
||||
#
|
||||
# CONFIG_ARCH_STDBOOL_H is not set
|
||||
CONFIG_ARCH_MATH_H=y
|
||||
# CONFIG_ARCH_FLOAT_H is not set
|
||||
# CONFIG_ARCH_STDARG_H is not set
|
||||
|
||||
#
|
||||
# Debug Options
|
||||
#
|
||||
# CONFIG_DEBUG is not set
|
||||
CONFIG_DEBUG_SYMBOLS=y
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_8051 is not set
|
||||
CONFIG_ARCH_ARM=y
|
||||
# CONFIG_ARCH_AVR is not set
|
||||
# CONFIG_ARCH_HC is not set
|
||||
# CONFIG_ARCH_MIPS is not set
|
||||
# CONFIG_ARCH_RGMP is not set
|
||||
# CONFIG_ARCH_SH is not set
|
||||
# CONFIG_ARCH_SIM is not set
|
||||
# CONFIG_ARCH_X86 is not set
|
||||
# CONFIG_ARCH_Z16 is not set
|
||||
# CONFIG_ARCH_Z80 is not set
|
||||
CONFIG_ARCH="arm"
|
||||
|
||||
#
|
||||
# ARM Options
|
||||
#
|
||||
# CONFIG_ARCH_CHIP_C5471 is not set
|
||||
# CONFIG_ARCH_CHIP_CALYPSO is not set
|
||||
# CONFIG_ARCH_CHIP_DM320 is not set
|
||||
# CONFIG_ARCH_CHIP_IMX is not set
|
||||
# CONFIG_ARCH_CHIP_KINETIS is not set
|
||||
# CONFIG_ARCH_CHIP_KL is not set
|
||||
# CONFIG_ARCH_CHIP_LM is not set
|
||||
# CONFIG_ARCH_CHIP_LPC17XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC214X is not set
|
||||
# CONFIG_ARCH_CHIP_LPC2378 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||
# CONFIG_ARCH_CHIP_NUC1XX is not set
|
||||
# CONFIG_ARCH_CHIP_SAM34 is not set
|
||||
CONFIG_ARCH_CHIP_STM32=y
|
||||
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||
CONFIG_ARCH_CORTEXM4=y
|
||||
CONFIG_ARCH_FAMILY="armv7-m"
|
||||
CONFIG_ARCH_CHIP="stm32"
|
||||
CONFIG_ARMV7M_USEBASEPRI=y
|
||||
CONFIG_ARCH_HAVE_CMNVECTOR=y
|
||||
CONFIG_ARMV7M_CMNVECTOR=y
|
||||
CONFIG_ARCH_HAVE_FPU=y
|
||||
CONFIG_ARCH_FPU=y
|
||||
CONFIG_ARCH_HAVE_MPU=y
|
||||
# CONFIG_ARMV7M_MPU is not set
|
||||
|
||||
#
|
||||
# ARMV7M Configuration Options
|
||||
#
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
|
||||
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
|
||||
# CONFIG_ARMV7M_STACKCHECK is not set
|
||||
CONFIG_SERIAL_TERMIOS=y
|
||||
|
||||
#
|
||||
# STM32 Configuration Options
|
||||
#
|
||||
# CONFIG_ARCH_CHIP_STM32L151C6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151C8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151R6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151R8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151RB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151V6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151V8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151VB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152C6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152C8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152R6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152R8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152RB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152V6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152V8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152VB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100C8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100R8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100RB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100RC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100RD is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100RE is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100V8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100VB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100VC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100VD is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100VE is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F102CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103C4 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103C8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F107VC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F207IG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302CC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302RB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302RC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302VB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302VC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303CC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303RB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303RC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303VB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303VC is not set
|
||||
CONFIG_ARCH_CHIP_STM32F405RG=y
|
||||
# CONFIG_ARCH_CHIP_STM32F405VG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F405ZG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407VE is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407VG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407ZE is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407ZG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407IE is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407IG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F427V is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F427Z is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F427I is not set
|
||||
# CONFIG_STM32_STM32L15XX is not set
|
||||
# CONFIG_STM32_ENERGYLITE is not set
|
||||
# CONFIG_STM32_STM32F10XX is not set
|
||||
# CONFIG_STM32_VALUELINE is not set
|
||||
# CONFIG_STM32_CONNECTIVITYLINE is not set
|
||||
# CONFIG_STM32_PERFORMANCELINE is not set
|
||||
# CONFIG_STM32_HIGHDENSITY is not set
|
||||
# CONFIG_STM32_MEDIUMDENSITY is not set
|
||||
# CONFIG_STM32_LOWDENSITY is not set
|
||||
# CONFIG_STM32_STM32F20XX is not set
|
||||
# CONFIG_STM32_STM32F30XX is not set
|
||||
CONFIG_STM32_STM32F40XX=y
|
||||
# CONFIG_STM32_DFU is not set
|
||||
|
||||
#
|
||||
# STM32 Peripheral Support
|
||||
#
|
||||
CONFIG_STM32_ADC1=y
|
||||
# CONFIG_STM32_ADC2 is not set
|
||||
# CONFIG_STM32_ADC3 is not set
|
||||
CONFIG_STM32_BKPSRAM=y
|
||||
# CONFIG_STM32_CAN1 is not set
|
||||
# CONFIG_STM32_CAN2 is not set
|
||||
CONFIG_STM32_CCMDATARAM=y
|
||||
# CONFIG_STM32_CRC is not set
|
||||
# CONFIG_STM32_CRYP is not set
|
||||
CONFIG_STM32_DMA1=y
|
||||
CONFIG_STM32_DMA2=y
|
||||
# CONFIG_STM32_DAC1 is not set
|
||||
# CONFIG_STM32_DAC2 is not set
|
||||
# CONFIG_STM32_DCMI is not set
|
||||
# CONFIG_STM32_ETHMAC is not set
|
||||
# CONFIG_STM32_FSMC is not set
|
||||
# CONFIG_STM32_HASH is not set
|
||||
CONFIG_STM32_I2C1=y
|
||||
# CONFIG_STM32_I2C2 is not set
|
||||
CONFIG_STM32_I2C3=y
|
||||
CONFIG_STM32_OTGFS=y
|
||||
# CONFIG_STM32_OTGHS is not set
|
||||
CONFIG_STM32_PWR=y
|
||||
# CONFIG_STM32_RNG is not set
|
||||
# CONFIG_STM32_SDIO is not set
|
||||
CONFIG_STM32_SPI1=y
|
||||
# CONFIG_STM32_SPI2 is not set
|
||||
# CONFIG_STM32_SPI3 is not set
|
||||
CONFIG_STM32_SYSCFG=y
|
||||
# CONFIG_STM32_TIM1 is not set
|
||||
CONFIG_STM32_TIM2=y
|
||||
# CONFIG_STM32_TIM3 is not set
|
||||
CONFIG_STM32_TIM4=y
|
||||
# CONFIG_STM32_TIM5 is not set
|
||||
# CONFIG_STM32_TIM6 is not set
|
||||
# CONFIG_STM32_TIM7 is not set
|
||||
# CONFIG_STM32_TIM8 is not set
|
||||
# CONFIG_STM32_TIM9 is not set
|
||||
# CONFIG_STM32_TIM10 is not set
|
||||
# CONFIG_STM32_TIM11 is not set
|
||||
# CONFIG_STM32_TIM12 is not set
|
||||
# CONFIG_STM32_TIM13 is not set
|
||||
# CONFIG_STM32_TIM14 is not set
|
||||
# CONFIG_STM32_USART1 is not set
|
||||
CONFIG_STM32_USART2=y
|
||||
CONFIG_STM32_USART3=y
|
||||
# CONFIG_STM32_UART4 is not set
|
||||
# CONFIG_STM32_UART5 is not set
|
||||
CONFIG_STM32_USART6=y
|
||||
# CONFIG_STM32_IWDG is not set
|
||||
CONFIG_STM32_WWDG=y
|
||||
CONFIG_STM32_ADC=y
|
||||
CONFIG_STM32_SPI=y
|
||||
CONFIG_STM32_I2C=y
|
||||
|
||||
#
|
||||
# Alternate Pin Mapping
|
||||
#
|
||||
CONFIG_STM32_FLASH_PREFETCH=y
|
||||
# CONFIG_STM32_JTAG_DISABLE is not set
|
||||
# CONFIG_STM32_JTAG_FULL_ENABLE is not set
|
||||
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
|
||||
CONFIG_STM32_JTAG_SW_ENABLE=y
|
||||
CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
|
||||
# CONFIG_STM32_FORCEPOWER is not set
|
||||
# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
|
||||
# CONFIG_STM32_CCMEXCLUDE is not set
|
||||
CONFIG_STM32_DMACAPABLE=y
|
||||
# CONFIG_STM32_TIM2_PWM is not set
|
||||
# CONFIG_STM32_TIM4_PWM is not set
|
||||
# CONFIG_STM32_TIM2_ADC is not set
|
||||
# CONFIG_STM32_TIM4_ADC is not set
|
||||
CONFIG_STM32_USART=y
|
||||
|
||||
#
|
||||
# U[S]ART Configuration
|
||||
#
|
||||
# CONFIG_USART2_RS485 is not set
|
||||
CONFIG_USART2_RXDMA=y
|
||||
# CONFIG_USART3_RS485 is not set
|
||||
CONFIG_USART3_RXDMA=y
|
||||
# CONFIG_USART6_RS485 is not set
|
||||
CONFIG_USART6_RXDMA=y
|
||||
CONFIG_SERIAL_DISABLE_REORDERING=y
|
||||
CONFIG_STM32_USART_SINGLEWIRE=y
|
||||
|
||||
#
|
||||
# SPI Configuration
|
||||
#
|
||||
# CONFIG_STM32_SPI_INTERRUPTS is not set
|
||||
# CONFIG_STM32_SPI_DMA is not set
|
||||
|
||||
#
|
||||
# I2C Configuration
|
||||
#
|
||||
# CONFIG_STM32_I2C_DYNTIMEO is not set
|
||||
CONFIG_STM32_I2CTIMEOSEC=0
|
||||
CONFIG_STM32_I2CTIMEOMS=10
|
||||
CONFIG_STM32_I2CTIMEOTICKS=500
|
||||
# CONFIG_STM32_I2C_DUTY16_9 is not set
|
||||
|
||||
#
|
||||
# USB Host Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# USB Device Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# External Memory Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Architecture Options
|
||||
#
|
||||
# CONFIG_ARCH_NOINTC is not set
|
||||
# CONFIG_ARCH_VECNOTIRQ is not set
|
||||
CONFIG_ARCH_DMA=y
|
||||
CONFIG_ARCH_IRQPRIO=y
|
||||
# CONFIG_CUSTOM_STACK is not set
|
||||
# CONFIG_ADDRENV is not set
|
||||
CONFIG_ARCH_HAVE_VFORK=y
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
|
||||
CONFIG_ARCH_HAVE_RAMVECTORS=y
|
||||
# CONFIG_ARCH_RAMVECTORS is not set
|
||||
|
||||
#
|
||||
# Board Settings
|
||||
#
|
||||
CONFIG_BOARD_LOOPSPERMSEC=16717
|
||||
# CONFIG_ARCH_CALIBRATION is not set
|
||||
CONFIG_DRAM_START=0x20000000
|
||||
CONFIG_DRAM_SIZE=196608
|
||||
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=750
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||
CONFIG_BOOT_RUNFROMFLASH=y
|
||||
# CONFIG_BOOT_RUNFROMISRAM is not set
|
||||
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||
# CONFIG_BOOT_COPYTORAM is not set
|
||||
|
||||
#
|
||||
# Board Selection
|
||||
#
|
||||
CONFIG_ARCH_BOARD_CUSTOM=y
|
||||
CONFIG_ARCH_BOARD=""
|
||||
|
||||
#
|
||||
# Common Board Options
|
||||
#
|
||||
CONFIG_NSH_MMCSDMINOR=0
|
||||
|
||||
#
|
||||
# Board-Specific Options
|
||||
#
|
||||
|
||||
#
|
||||
# RTOS Features
|
||||
#
|
||||
# CONFIG_BOARD_INITIALIZE is not set
|
||||
CONFIG_MSEC_PER_TICK=1
|
||||
CONFIG_RR_INTERVAL=0
|
||||
CONFIG_SCHED_INSTRUMENTATION=y
|
||||
CONFIG_TASK_NAME_SIZE=24
|
||||
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||
# CONFIG_JULIAN_TIME is not set
|
||||
CONFIG_START_YEAR=1970
|
||||
CONFIG_START_MONTH=1
|
||||
CONFIG_START_DAY=1
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
CONFIG_PRIORITY_INHERITANCE=y
|
||||
CONFIG_SEM_PREALLOCHOLDERS=0
|
||||
CONFIG_SEM_NNESTPRIO=8
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
CONFIG_FDCLONE_STDIO=y
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
# CONFIG_SCHED_STARTHOOK is not set
|
||||
CONFIG_SCHED_ATEXIT=y
|
||||
CONFIG_SCHED_ATEXIT_MAX=1
|
||||
# CONFIG_SCHED_ONEXIT is not set
|
||||
CONFIG_USER_ENTRYPOINT="nsh_main"
|
||||
# CONFIG_DISABLE_OS_API is not set
|
||||
|
||||
#
|
||||
# Signal Numbers
|
||||
#
|
||||
CONFIG_SIG_SIGUSR1=1
|
||||
CONFIG_SIG_SIGUSR2=2
|
||||
CONFIG_SIG_SIGALARM=3
|
||||
CONFIG_SIG_SIGCONDTIMEDOUT=16
|
||||
CONFIG_SIG_SIGWORK=4
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
#
|
||||
CONFIG_MAX_TASKS=32
|
||||
CONFIG_MAX_TASK_ARGS=10
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
CONFIG_NFILE_DESCRIPTORS=42
|
||||
CONFIG_NFILE_STREAMS=8
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_PREALLOC_MQ_MSGS=4
|
||||
CONFIG_MQ_MAXMSGSIZE=32
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=50
|
||||
CONFIG_PREALLOC_TIMERS=50
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
#
|
||||
CONFIG_IDLETHREAD_STACKSIZE=1000
|
||||
CONFIG_USERMAIN_STACKSIZE=2500
|
||||
CONFIG_PTHREAD_STACK_MIN=512
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
# CONFIG_DISABLE_POLL is not set
|
||||
CONFIG_DEV_NULL=y
|
||||
# CONFIG_DEV_ZERO is not set
|
||||
# CONFIG_LOOP is not set
|
||||
# CONFIG_RAMDISK is not set
|
||||
# CONFIG_CAN is not set
|
||||
# CONFIG_PWM is not set
|
||||
CONFIG_I2C=y
|
||||
# CONFIG_I2C_SLAVE is not set
|
||||
CONFIG_I2C_TRANSFER=y
|
||||
# CONFIG_I2C_WRITEREAD is not set
|
||||
# CONFIG_I2C_POLLED is not set
|
||||
# CONFIG_I2C_TRACE is not set
|
||||
CONFIG_ARCH_HAVE_I2CRESET=y
|
||||
CONFIG_I2C_RESET=y
|
||||
CONFIG_SPI=y
|
||||
# CONFIG_SPI_OWNBUS is not set
|
||||
CONFIG_SPI_EXCHANGE=y
|
||||
# CONFIG_SPI_CMDDATA is not set
|
||||
# CONFIG_RTC is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
# CONFIG_ANALOG is not set
|
||||
# CONFIG_AUDIO_DEVICES is not set
|
||||
# CONFIG_BCH is not set
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_LCD is not set
|
||||
# CONFIG_MMCSD is not set
|
||||
# CONFIG_MTD is not set
|
||||
CONFIG_PIPES=y
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_POWER is not set
|
||||
# CONFIG_SENSORS is not set
|
||||
CONFIG_SERIAL=y
|
||||
# CONFIG_DEV_LOWCONSOLE is not set
|
||||
CONFIG_SERIAL_REMOVABLE=y
|
||||
# CONFIG_16550_UART is not set
|
||||
CONFIG_ARCH_HAVE_USART2=y
|
||||
CONFIG_ARCH_HAVE_USART3=y
|
||||
CONFIG_ARCH_HAVE_USART6=y
|
||||
CONFIG_MCU_SERIAL=y
|
||||
CONFIG_STANDARD_SERIAL=y
|
||||
CONFIG_SERIAL_NPOLLWAITERS=2
|
||||
# CONFIG_USART2_SERIAL_CONSOLE is not set
|
||||
CONFIG_USART3_SERIAL_CONSOLE=y
|
||||
# CONFIG_USART6_SERIAL_CONSOLE is not set
|
||||
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||
|
||||
#
|
||||
# USART2 Configuration
|
||||
#
|
||||
CONFIG_USART2_RXBUFSIZE=300
|
||||
CONFIG_USART2_TXBUFSIZE=300
|
||||
CONFIG_USART2_BAUD=57600
|
||||
CONFIG_USART2_BITS=8
|
||||
CONFIG_USART2_PARITY=0
|
||||
CONFIG_USART2_2STOP=0
|
||||
# CONFIG_USART2_IFLOWCONTROL is not set
|
||||
# CONFIG_USART2_OFLOWCONTROL is not set
|
||||
|
||||
#
|
||||
# USART3 Configuration
|
||||
#
|
||||
CONFIG_USART3_RXBUFSIZE=256
|
||||
CONFIG_USART3_TXBUFSIZE=256
|
||||
CONFIG_USART3_BAUD=115200
|
||||
CONFIG_USART3_BITS=8
|
||||
CONFIG_USART3_PARITY=0
|
||||
CONFIG_USART3_2STOP=0
|
||||
# CONFIG_USART3_IFLOWCONTROL is not set
|
||||
# CONFIG_USART3_OFLOWCONTROL is not set
|
||||
|
||||
#
|
||||
# USART6 Configuration
|
||||
#
|
||||
CONFIG_USART6_RXBUFSIZE=128
|
||||
CONFIG_USART6_TXBUFSIZE=64
|
||||
CONFIG_USART6_BAUD=57600
|
||||
CONFIG_USART6_BITS=8
|
||||
CONFIG_USART6_PARITY=0
|
||||
CONFIG_USART6_2STOP=0
|
||||
# CONFIG_USART6_IFLOWCONTROL is not set
|
||||
# CONFIG_USART6_OFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_IFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_OFLOWCONTROL is not set
|
||||
CONFIG_USBDEV=y
|
||||
|
||||
#
|
||||
# USB Device Controller Driver Options
|
||||
#
|
||||
# CONFIG_USBDEV_ISOCHRONOUS is not set
|
||||
# CONFIG_USBDEV_DUALSPEED is not set
|
||||
# CONFIG_USBDEV_SELFPOWERED is not set
|
||||
CONFIG_USBDEV_BUSPOWERED=y
|
||||
CONFIG_USBDEV_MAXPOWER=500
|
||||
# CONFIG_USBDEV_DMA is not set
|
||||
# CONFIG_USBDEV_TRACE is not set
|
||||
|
||||
#
|
||||
# USB Device Class Driver Options
|
||||
#
|
||||
# CONFIG_USBDEV_COMPOSITE is not set
|
||||
# CONFIG_PL2303 is not set
|
||||
CONFIG_CDCACM=y
|
||||
# CONFIG_CDCACM_CONSOLE is not set
|
||||
CONFIG_CDCACM_EP0MAXPACKET=64
|
||||
CONFIG_CDCACM_EPINTIN=1
|
||||
CONFIG_CDCACM_EPINTIN_FSSIZE=64
|
||||
CONFIG_CDCACM_EPINTIN_HSSIZE=64
|
||||
CONFIG_CDCACM_EPBULKOUT=3
|
||||
CONFIG_CDCACM_EPBULKOUT_FSSIZE=64
|
||||
CONFIG_CDCACM_EPBULKOUT_HSSIZE=512
|
||||
CONFIG_CDCACM_EPBULKIN=2
|
||||
CONFIG_CDCACM_EPBULKIN_FSSIZE=64
|
||||
CONFIG_CDCACM_EPBULKIN_HSSIZE=512
|
||||
CONFIG_CDCACM_NWRREQS=4
|
||||
CONFIG_CDCACM_NRDREQS=4
|
||||
CONFIG_CDCACM_BULKIN_REQLEN=96
|
||||
CONFIG_CDCACM_RXBUFSIZE=300
|
||||
CONFIG_CDCACM_TXBUFSIZE=1000
|
||||
CONFIG_CDCACM_VENDORID=0x26ac
|
||||
CONFIG_CDCACM_PRODUCTID=0x0016
|
||||
CONFIG_CDCACM_VENDORSTR="3D Robotics"
|
||||
CONFIG_CDCACM_PRODUCTSTR="PX4 Crazyflie v2.0"
|
||||
# CONFIG_USBMSC is not set
|
||||
# CONFIG_USBHOST is not set
|
||||
# CONFIG_WIRELESS is not set
|
||||
|
||||
#
|
||||
# System Logging Device Options
|
||||
#
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_RAMLOG is not set
|
||||
|
||||
#
|
||||
# Networking Support
|
||||
#
|
||||
# CONFIG_NET is not set
|
||||
|
||||
#
|
||||
# File Systems
|
||||
#
|
||||
|
||||
#
|
||||
# File system configuration
|
||||
#
|
||||
# CONFIG_DISABLE_MOUNTPOINT is not set
|
||||
# CONFIG_FS_RAMMAP is not set
|
||||
CONFIG_FS_FAT=y
|
||||
# CONFIG_FAT_LCNAMES is not set
|
||||
# CONFIG_FAT_LFN is not set
|
||||
# CONFIG_FS_FATTIME is not set
|
||||
# CONFIG_FAT_DMAMEMORY is not set
|
||||
CONFIG_FS_NXFFS=y
|
||||
CONFIG_NXFFS_PREALLOCATED=y
|
||||
CONFIG_NXFFS_ERASEDSTATE=0xff
|
||||
CONFIG_NXFFS_PACKTHRESHOLD=32
|
||||
CONFIG_NXFFS_MAXNAMLEN=32
|
||||
CONFIG_NXFFS_TAILTHRESHOLD=2048
|
||||
CONFIG_FS_ROMFS=y
|
||||
# CONFIG_FS_SMARTFS is not set
|
||||
CONFIG_FS_BINFS=y
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_SYSLOG_ENABLE is not set
|
||||
# CONFIG_SYSLOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_NX is not set
|
||||
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
# CONFIG_MM_MULTIHEAP is not set
|
||||
# CONFIG_MM_SMALL is not set
|
||||
CONFIG_MM_REGIONS=2
|
||||
CONFIG_GRAN=y
|
||||
CONFIG_GRAN_SINGLE=y
|
||||
CONFIG_GRAN_INTR=y
|
||||
|
||||
#
|
||||
# Audio Support
|
||||
#
|
||||
# CONFIG_AUDIO is not set
|
||||
|
||||
#
|
||||
# Binary Formats
|
||||
#
|
||||
# CONFIG_BINFMT_DISABLE is not set
|
||||
# CONFIG_BINFMT_EXEPATH is not set
|
||||
# CONFIG_NXFLAT is not set
|
||||
# CONFIG_ELF is not set
|
||||
CONFIG_BUILTIN=y
|
||||
# CONFIG_PIC is not set
|
||||
# CONFIG_SYMTAB_ORDEREDBYNAME is not set
|
||||
|
||||
#
|
||||
# Library Routines
|
||||
#
|
||||
|
||||
#
|
||||
# Standard C Library Options
|
||||
#
|
||||
CONFIG_STDIO_BUFFER_SIZE=180
|
||||
CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
CONFIG_LIB_HOMEDIR="/"
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||
CONFIG_LIBC_FLOATINGPOINT=y
|
||||
CONFIG_LIB_RAND_ORDER=1
|
||||
# CONFIG_EOL_IS_CR is not set
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||
# CONFIG_LIBC_EXECFUNCS is not set
|
||||
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
|
||||
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
|
||||
CONFIG_LIBC_STRERROR=y
|
||||
# CONFIG_LIBC_STRERROR_SHORT is not set
|
||||
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
CONFIG_ARCH_OPTIMIZED_FUNCTIONS=y
|
||||
CONFIG_ARCH_MEMCPY=y
|
||||
# CONFIG_ARCH_MEMCMP is not set
|
||||
# CONFIG_ARCH_MEMMOVE is not set
|
||||
# CONFIG_ARCH_MEMSET is not set
|
||||
# CONFIG_MEMSET_OPTSPEED is not set
|
||||
# CONFIG_ARCH_STRCHR is not set
|
||||
# CONFIG_ARCH_STRCMP is not set
|
||||
# CONFIG_ARCH_STRCPY is not set
|
||||
# CONFIG_ARCH_STRNCPY is not set
|
||||
# CONFIG_ARCH_STRLEN is not set
|
||||
# CONFIG_ARCH_STRNLEN is not set
|
||||
# CONFIG_ARCH_BZERO is not set
|
||||
|
||||
#
|
||||
# Non-standard Library Support
|
||||
#
|
||||
CONFIG_SCHED_WORKQUEUE=y
|
||||
CONFIG_SCHED_HPWORK=y
|
||||
CONFIG_SCHED_WORKPRIORITY=192
|
||||
CONFIG_SCHED_WORKPERIOD=5000
|
||||
CONFIG_SCHED_WORKSTACKSIZE=1600
|
||||
CONFIG_SCHED_LPWORK=y
|
||||
CONFIG_SCHED_LPWORKPRIORITY=50
|
||||
CONFIG_SCHED_LPWORKPERIOD=50000
|
||||
CONFIG_SCHED_LPWORKSTACKSIZE=1600
|
||||
# CONFIG_LIB_KBDCODEC is not set
|
||||
# CONFIG_LIB_SLCDCODEC is not set
|
||||
|
||||
#
|
||||
# Basic CXX Support
|
||||
#
|
||||
CONFIG_C99_BOOL8=y
|
||||
CONFIG_HAVE_CXX=y
|
||||
CONFIG_HAVE_CXXINITIALIZE=y
|
||||
# CONFIG_CXX_NEWLONG is not set
|
||||
|
||||
#
|
||||
# uClibc++ Standard C++ Library
|
||||
#
|
||||
# CONFIG_UCLIBCXX is not set
|
||||
|
||||
#
|
||||
# Application Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Built-In Applications
|
||||
#
|
||||
CONFIG_BUILTIN_PROXY_STACKSIZE=1024
|
||||
|
||||
#
|
||||
# Examples
|
||||
#
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CAN is not set
|
||||
CONFIG_EXAMPLES_CDCACM=y
|
||||
# CONFIG_EXAMPLES_COMPOSITE is not set
|
||||
# CONFIG_EXAMPLES_CXXTEST is not set
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
# CONFIG_EXAMPLES_ELF is not set
|
||||
# CONFIG_EXAMPLES_FTPC is not set
|
||||
# CONFIG_EXAMPLES_FTPD is not set
|
||||
# CONFIG_EXAMPLES_HELLO is not set
|
||||
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||
# CONFIG_EXAMPLES_JSON is not set
|
||||
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_LCDRW is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
CONFIG_EXAMPLES_MOUNT=y
|
||||
# CONFIG_EXAMPLES_NRF24L01TERM is not set
|
||||
CONFIG_EXAMPLES_NSH=y
|
||||
# CONFIG_EXAMPLES_NULL is not set
|
||||
# CONFIG_EXAMPLES_NX is not set
|
||||
# CONFIG_EXAMPLES_NXCONSOLE is not set
|
||||
# CONFIG_EXAMPLES_NXFFS is not set
|
||||
# CONFIG_EXAMPLES_NXFLAT is not set
|
||||
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||
# CONFIG_EXAMPLES_NXLINES is not set
|
||||
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||
# CONFIG_EXAMPLES_OSTEST is not set
|
||||
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||
# CONFIG_EXAMPLES_PIPE is not set
|
||||
# CONFIG_EXAMPLES_POSIXSPAWN is not set
|
||||
# CONFIG_EXAMPLES_QENCODER is not set
|
||||
# CONFIG_EXAMPLES_RGMP is not set
|
||||
# CONFIG_EXAMPLES_ROMFS is not set
|
||||
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||
# CONFIG_EXAMPLES_SLCD is not set
|
||||
# CONFIG_EXAMPLES_SMART_TEST is not set
|
||||
# CONFIG_EXAMPLES_SMART is not set
|
||||
# CONFIG_EXAMPLES_TCPECHO is not set
|
||||
# CONFIG_EXAMPLES_TELNETD is not set
|
||||
# CONFIG_EXAMPLES_THTTPD is not set
|
||||
# CONFIG_EXAMPLES_TIFF is not set
|
||||
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||
# CONFIG_EXAMPLES_UDP is not set
|
||||
# CONFIG_EXAMPLES_UIP is not set
|
||||
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||
# CONFIG_EXAMPLES_USBMSC is not set
|
||||
# CONFIG_EXAMPLES_USBTERM is not set
|
||||
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_TIFF is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
#
|
||||
# CONFIG_INTERPRETERS_FICL is not set
|
||||
# CONFIG_INTERPRETERS_PCODE is not set
|
||||
|
||||
#
|
||||
# Network Utilities
|
||||
#
|
||||
|
||||
#
|
||||
# Networking Utilities
|
||||
#
|
||||
# CONFIG_NETUTILS_CODECS is not set
|
||||
# CONFIG_NETUTILS_DHCPC is not set
|
||||
# CONFIG_NETUTILS_DHCPD is not set
|
||||
# CONFIG_NETUTILS_FTPC is not set
|
||||
# CONFIG_NETUTILS_FTPD is not set
|
||||
# CONFIG_NETUTILS_JSON is not set
|
||||
# CONFIG_NETUTILS_RESOLV is not set
|
||||
# CONFIG_NETUTILS_SMTP is not set
|
||||
# CONFIG_NETUTILS_TELNETD is not set
|
||||
# CONFIG_NETUTILS_TFTPC is not set
|
||||
# CONFIG_NETUTILS_THTTPD is not set
|
||||
# CONFIG_NETUTILS_UIPLIB is not set
|
||||
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||
|
||||
#
|
||||
# FreeModBus
|
||||
#
|
||||
# CONFIG_MODBUS is not set
|
||||
|
||||
#
|
||||
# NSH Library
|
||||
#
|
||||
CONFIG_NSH_LIBRARY=y
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
|
||||
#
|
||||
# Disable Individual commands
|
||||
#
|
||||
# CONFIG_NSH_DISABLE_CAT is not set
|
||||
# CONFIG_NSH_DISABLE_CD is not set
|
||||
# CONFIG_NSH_DISABLE_CP is not set
|
||||
# CONFIG_NSH_DISABLE_DD is not set
|
||||
# CONFIG_NSH_DISABLE_ECHO is not set
|
||||
# CONFIG_NSH_DISABLE_EXEC is not set
|
||||
# CONFIG_NSH_DISABLE_EXIT is not set
|
||||
# CONFIG_NSH_DISABLE_FREE is not set
|
||||
# CONFIG_NSH_DISABLE_GET is not set
|
||||
# CONFIG_NSH_DISABLE_HELP is not set
|
||||
# CONFIG_NSH_DISABLE_HEXDUMP is not set
|
||||
# CONFIG_NSH_DISABLE_IFCONFIG is not set
|
||||
# CONFIG_NSH_DISABLE_KILL is not set
|
||||
# CONFIG_NSH_DISABLE_LOSETUP is not set
|
||||
# CONFIG_NSH_DISABLE_LS is not set
|
||||
# CONFIG_NSH_DISABLE_MB is not set
|
||||
# CONFIG_NSH_DISABLE_MKDIR is not set
|
||||
# CONFIG_NSH_DISABLE_MKFATFS is not set
|
||||
# CONFIG_NSH_DISABLE_MKFIFO is not set
|
||||
# CONFIG_NSH_DISABLE_MKRD is not set
|
||||
# CONFIG_NSH_DISABLE_MH is not set
|
||||
# CONFIG_NSH_DISABLE_MOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_MW is not set
|
||||
# CONFIG_NSH_DISABLE_NSFMOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_PS is not set
|
||||
# CONFIG_NSH_DISABLE_PING is not set
|
||||
# CONFIG_NSH_DISABLE_PUT is not set
|
||||
# CONFIG_NSH_DISABLE_PWD is not set
|
||||
# CONFIG_NSH_DISABLE_RM is not set
|
||||
# CONFIG_NSH_DISABLE_RMDIR is not set
|
||||
# CONFIG_NSH_DISABLE_SET is not set
|
||||
# CONFIG_NSH_DISABLE_SH is not set
|
||||
# CONFIG_NSH_DISABLE_SLEEP is not set
|
||||
# CONFIG_NSH_DISABLE_TEST is not set
|
||||
# CONFIG_NSH_DISABLE_UMOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_UNSET is not set
|
||||
# CONFIG_NSH_DISABLE_USLEEP is not set
|
||||
# CONFIG_NSH_DISABLE_WGET is not set
|
||||
# CONFIG_NSH_DISABLE_XD is not set
|
||||
|
||||
#
|
||||
# Configure Command Options
|
||||
#
|
||||
# CONFIG_NSH_CMDOPT_DF_H is not set
|
||||
CONFIG_NSH_CODECS_BUFSIZE=128
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_STRERROR=y
|
||||
CONFIG_NSH_LINELEN=128
|
||||
CONFIG_NSH_MAXARGUMENTS=12
|
||||
CONFIG_NSH_NESTDEPTH=8
|
||||
# CONFIG_NSH_DISABLESCRIPT is not set
|
||||
# CONFIG_NSH_DISABLEBG is not set
|
||||
CONFIG_NSH_ROMFSETC=y
|
||||
# CONFIG_NSH_ROMFSRC is not set
|
||||
CONFIG_NSH_ROMFSMOUNTPT="/etc"
|
||||
CONFIG_NSH_INITSCRIPT="init.d/rcS"
|
||||
CONFIG_NSH_ROMFSDEVNO=0
|
||||
CONFIG_NSH_ROMFSSECTSIZE=128
|
||||
CONFIG_NSH_ARCHROMFS=y
|
||||
CONFIG_NSH_FATDEVNO=0
|
||||
CONFIG_NSH_FATSECTSIZE=512
|
||||
CONFIG_NSH_FATNSECTORS=1024
|
||||
CONFIG_NSH_FATMOUNTPT="/tmp"
|
||||
CONFIG_NSH_CONSOLE=y
|
||||
# CONFIG_NSH_USBCONSOLE is not set
|
||||
|
||||
#
|
||||
# USB Trace Support
|
||||
#
|
||||
# CONFIG_NSH_CONDEV is not set
|
||||
CONFIG_NSH_ARCHINIT=y
|
||||
|
||||
#
|
||||
# NxWidgets/NxWM
|
||||
#
|
||||
|
||||
#
|
||||
# System NSH Add-Ons
|
||||
#
|
||||
|
||||
#
|
||||
# Custom Free Memory Command
|
||||
#
|
||||
# CONFIG_SYSTEM_FREE is not set
|
||||
|
||||
#
|
||||
# I2C tool
|
||||
#
|
||||
# CONFIG_SYSTEM_I2CTOOL is not set
|
||||
|
||||
#
|
||||
# FLASH Program Installation
|
||||
#
|
||||
# CONFIG_SYSTEM_INSTALL is not set
|
||||
|
||||
#
|
||||
# FLASH Erase-all Command
|
||||
#
|
||||
|
||||
#
|
||||
# readline()
|
||||
#
|
||||
CONFIG_SYSTEM_READLINE=y
|
||||
CONFIG_READLINE_ECHO=y
|
||||
|
||||
#
|
||||
# Power Off
|
||||
#
|
||||
# CONFIG_SYSTEM_POWEROFF is not set
|
||||
|
||||
#
|
||||
# RAMTRON
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTRON is not set
|
||||
|
||||
#
|
||||
# SD Card
|
||||
#
|
||||
# CONFIG_SYSTEM_SDCARD is not set
|
||||
|
||||
#
|
||||
# Sysinfo
|
||||
#
|
||||
CONFIG_SYSTEM_SYSINFO=y
|
||||
|
||||
#
|
||||
# USB Monitor
|
||||
#
|
||||
Executable
+75
@@ -0,0 +1,75 @@
|
||||
#!/bin/bash
|
||||
# configs/crazyflie/usbnsh/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the RIDE
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the RIDE toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
|
||||
# These are the Cygwin paths to the locations where I installed the Atollic
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the Atollic toolchain in any other location. /usr/bin is added before
|
||||
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
|
||||
# at those locations as well.
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
@@ -0,0 +1,149 @@
|
||||
/****************************************************************************
|
||||
* configs/crazyflie/scripts/ld.script
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* The STM32F405RG has 1024Kb of FLASH beginning at address 0x0800:0000 and
|
||||
* 192Kb of SRAM. SRAM is split up into three blocks:
|
||||
*
|
||||
* 1) 112Kb of SRAM beginning at address 0x2000:0000
|
||||
* 2) 16Kb of SRAM beginning at address 0x2001:c000
|
||||
* 3) 64Kb of CCM SRAM beginning at address 0x1000:0000
|
||||
*
|
||||
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
|
||||
* where the code expects to begin execution by jumping to the entry point in
|
||||
* the 0x0800:0000 address range.
|
||||
*
|
||||
* The first 0x4000 of flash is reserved for the bootloader.
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
flash (rx) : ORIGIN = 0x08004000, LENGTH = 1008K
|
||||
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 128K
|
||||
ccsram (rwx) : ORIGIN = 0x10000000, LENGTH = 64K
|
||||
}
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
|
||||
ENTRY(__start) /* treat __start as the anchor for dead code stripping */
|
||||
EXTERN(_vectors) /* force the vectors to be included in the output */
|
||||
|
||||
/*
|
||||
* Ensure that abort() is present in the final object. The exception handling
|
||||
* code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
|
||||
*/
|
||||
EXTERN(abort)
|
||||
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
|
||||
/*
|
||||
* This is a hack to make the newlib libm __errno() call
|
||||
* use the NuttX get_errno_ptr() function.
|
||||
*/
|
||||
__errno = get_errno_ptr;
|
||||
} > flash
|
||||
|
||||
/*
|
||||
* Init functions (static constructors and the like)
|
||||
*/
|
||||
.init_section : {
|
||||
_sinit = ABSOLUTE(.);
|
||||
KEEP(*(.init_array .init_array.*))
|
||||
_einit = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
/*
|
||||
* Construction data for parameters.
|
||||
*/
|
||||
__param ALIGN(4): {
|
||||
__param_start = ABSOLUTE(.);
|
||||
KEEP(*(__param*))
|
||||
__param_end = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} > flash
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} > flash
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > sram AT > flash
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > sram
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
@@ -0,0 +1,84 @@
|
||||
############################################################################
|
||||
# configs/crazyflie/src/Makefile
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
-include $(TOPDIR)/Make.defs
|
||||
|
||||
CFLAGS += -I$(TOPDIR)/sched
|
||||
|
||||
ASRCS =
|
||||
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
||||
|
||||
CSRCS = empty.c
|
||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||
|
||||
SRCS = $(ASRCS) $(CSRCS)
|
||||
OBJS = $(AOBJS) $(COBJS)
|
||||
|
||||
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
|
||||
ifeq ($(WINTOOL),y)
|
||||
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
|
||||
else
|
||||
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
|
||||
endif
|
||||
|
||||
all: libboard$(LIBEXT)
|
||||
|
||||
$(AOBJS): %$(OBJEXT): %.S
|
||||
$(call ASSEMBLE, $<, $@)
|
||||
|
||||
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
|
||||
$(call COMPILE, $<, $@)
|
||||
|
||||
libboard$(LIBEXT): $(OBJS)
|
||||
$(call ARCHIVE, $@, $(OBJS))
|
||||
|
||||
.depend: Makefile $(SRCS)
|
||||
$(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
|
||||
$(Q) touch $@
|
||||
|
||||
depend: .depend
|
||||
|
||||
clean:
|
||||
$(call DELFILE, libboard$(LIBEXT))
|
||||
$(call CLEAN)
|
||||
|
||||
distclean: clean
|
||||
$(call DELFILE, Make.dep)
|
||||
$(call DELFILE, .depend)
|
||||
|
||||
-include Make.dep
|
||||
|
||||
@@ -0,0 +1,4 @@
|
||||
/*
|
||||
* There are no source files here, but libboard.a can't be empty, so
|
||||
* we have this empty source file to keep it company.
|
||||
*/
|
||||
Reference in New Issue
Block a user