WIP: common board init

This commit is contained in:
Daniel Agar
2022-05-04 18:31:40 -04:00
parent 2cc25f0763
commit a1fa3cc699
25 changed files with 176 additions and 419 deletions
@@ -381,12 +381,6 @@
#define GPIO_SPI6_SCK GPIO_SPI6_SCK_1 /* PG13 */
/* I2C
*
* Each I2C is associated with a U[S]ART
* hence the naming I2C2_SDA_UART4 in FMU USAGE spreadsheet
*
*
* I2C3 is not pined out on FMUv5 on 144 pin packages
*
* The optional _GPIO configurations allow the I2C driver to manually
* reset the bus to clear stuck slaves. They match the pin configuration,
+1
View File
@@ -52,6 +52,7 @@ add_dependencies(drivers_board nuttx_context)
target_link_libraries(drivers_board
PRIVATE
arch_board_hw_info
arch_init
arch_spi
drivers__led # drv_led_start
nuttx_arch # sdio
-19
View File
@@ -434,15 +434,6 @@ static inline bool board_get_external_lockout_state(void)
PX4_ADC_GPIO, \
GPIO_HW_REV_DRIVE, \
GPIO_HW_VER_DRIVE, \
GPIO_CAN1_TX, \
GPIO_CAN1_RX, \
GPIO_CAN2_TX, \
GPIO_CAN2_RX, \
GPIO_CAN3_TX, \
GPIO_CAN3_RX, \
GPIO_CAN1_SILENT_S0, \
GPIO_CAN2_SILENT_S1, \
GPIO_CAN3_SILENT_S2, \
GPIO_HEATER_OUTPUT, \
GPIO_nPOWER_IN_A, \
GPIO_nPOWER_IN_B, \
@@ -460,14 +451,6 @@ static inline bool board_get_external_lockout_state(void)
GPIO_nSAFETY_SWITCH_LED_OUT_INIT, \
GPIO_SAFETY_SWITCH_IN, \
GPIO_nARMED_INIT, \
PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C1_SCL), \
PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C1_SDA), \
PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C2_SCL), \
PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C2_SDA), \
PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C3_SCL), \
PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C3_SDA), \
PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C4_SCL), \
PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C4_SDA), \
}
#define BOARD_ENABLE_CONSOLE_BUFFER
@@ -511,8 +494,6 @@ int stm32_sdio_initialize(void);
extern void stm32_spiinitialize(void);
extern void stm32_usbinitialize(void);
extern void board_peripheral_reset(int ms);
#include <px4_platform_common/board_common.h>
-31
View File
@@ -148,37 +148,6 @@ __EXPORT void board_on_reset(int status)
}
}
/************************************************************************************
* Name: stm32_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the initialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
__EXPORT void
stm32_boardinitialize(void)
{
board_on_reset(-1); /* Reset PWM first thing */
/* configure LEDs */
board_autoled_initialize();
/* configure pins */
const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
px4_gpio_init(gpio, arraySize(gpio));
board_control_spi_sensors_power_configgpio();
/* configure USB interfaces */
stm32_usbinitialize();
}
/****************************************************************************
* Name: board_app_initialize
*
-35
View File
@@ -37,10 +37,6 @@
* Board-specific USB functions.
*/
/************************************************************************************
* Included Files
************************************************************************************/
#include <px4_platform_common/px4_config.h>
#include <sys/types.h>
@@ -57,37 +53,6 @@
#include <stm32_otg.h>
#include "board_config.h"
/************************************************************************************
* Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32_usbinitialize
*
* Description:
* Called to setup USB-related GPIO pins for the PX4FMU board.
*
************************************************************************************/
__EXPORT void stm32_usbinitialize(void)
{
/* The OTG FS has an internal soft pull-up */
/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
#ifdef CONFIG_STM32F7_OTGFS
stm32_configgpio(GPIO_OTGFS_VBUS);
#endif
}
/************************************************************************************
* Name: stm32_usbsuspend
*
+1
View File
@@ -48,6 +48,7 @@ add_dependencies(drivers_board platform_gpio_mcp23009)
target_link_libraries(drivers_board
PRIVATE
arch_init
arch_io_pins
arch_spi
arch_board_hw_info
+1 -47
View File
@@ -250,7 +250,7 @@
/* ETHERNET GPIO */
#define GPIO_ETH_POWER_EN /* PG15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN15)
#define GPIO_ETH_POWER_EN /* PG15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTG|GPIO_PIN15)
/* NFC GPIO */
@@ -399,10 +399,6 @@
#define PX4_GPIO_INIT_LIST { \
PX4_ADC_GPIO, \
GPIO_HW_VER_REV_DRIVE, \
GPIO_CAN1_TX, \
GPIO_CAN1_RX, \
GPIO_CAN2_TX, \
GPIO_CAN2_RX, \
GPIO_HEATER_OUTPUT, \
GPIO_nPOWER_IN_A, \
GPIO_nPOWER_IN_B, \
@@ -424,14 +420,6 @@
GPIO_SAFETY_SWITCH_IN, \
GPIO_PG6, \
GPIO_nARMED_INIT, \
PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C1_SCL), \
PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C1_SDA), \
PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C2_SCL), \
PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C2_SDA), \
PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C3_SCL), \
PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C3_SDA), \
PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C4_SCL), \
PX4_MAKE_GPIO_OUTPUT_CLEAR(GPIO_I2C4_SDA), \
}
#define BOARD_ENABLE_CONSOLE_BUFFER
@@ -442,47 +430,13 @@
#define PX4_I2C_BUS_MTD 4,5
__BEGIN_DECLS
/****************************************************************************************************
* Public Types
****************************************************************************************************/
/****************************************************************************************************
* Public data
****************************************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************************************
* Public Functions
****************************************************************************************************/
/****************************************************************************
* Name: stm32_sdio_initialize
*
* Description:
* Initialize SDIO-based MMC/SD card support
*
****************************************************************************/
int stm32_sdio_initialize(void);
/****************************************************************************************************
* Name: stm32_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the PX4FMU board.
*
****************************************************************************************************/
extern void stm32_spiinitialize(void);
extern void stm32_usbinitialize(void);
extern void board_peripheral_reset(int ms);
#include <px4_platform_common/board_common.h>
#endif /* __ASSEMBLY__ */
__END_DECLS
-31
View File
@@ -151,37 +151,6 @@ __EXPORT void board_on_reset(int status)
}
}
/************************************************************************************
* Name: stm32_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the initialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
extern "C" __EXPORT void
stm32_boardinitialize(void)
{
board_on_reset(-1); /* Reset PWM first thing */
/* configure LEDs */
board_autoled_initialize();
/* configure pins */
const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
px4_gpio_init(gpio, arraySize(gpio));
/* configure USB interfaces */
stm32_usbinitialize();
VDD_3V3_ETH_POWER_EN(true);
}
/****************************************************************************
* Name: board_app_initialize
+1 -36
View File
@@ -32,15 +32,11 @@
****************************************************************************/
/**
* @file px4fmu_usb.c
* @file usb.c
*
* Board-specific USB functions.
*/
/************************************************************************************
* Included Files
************************************************************************************/
#include <px4_platform_common/px4_config.h>
#include <sys/types.h>
@@ -57,37 +53,6 @@
#include <stm32_otg.h>
#include "board_config.h"
/************************************************************************************
* Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32_usbinitialize
*
* Description:
* Called to setup USB-related GPIO pins for the PX4FMU board.
*
************************************************************************************/
__EXPORT void stm32_usbinitialize(void)
{
/* The OTG FS has an internal soft pull-up */
/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
#ifdef CONFIG_STM32F7_OTGFS
stm32_configgpio(GPIO_OTGFS_VBUS);
#endif
}
/************************************************************************************
* Name: stm32_usbsuspend
*