Add common Toolchain.defs for AVR/AVR32; Add Toolchain.defs for ARM; Add more toolchain options (from Mike); incdir.sh and .bat now take -s option

git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5384 42af7a65-404d-4744-a932-0658087f49c3

NxWidgets/ChangeLog.txt

@@ -212,4 +212,3 @@
   user-space work queues (someday) in order to accomplish that functionaliy.
   Submitted by Petteri Aimonen.
 
-  solutions

nuttx/ChangeLog

@@ -3659,6 +3659,8 @@
 	* configs/cloudctrl:   Darcy Gong's CloudController board.  This is a
 	  small network relay development board. Based on the Shenzhou IV development
 	  board design.  It is based on the STM32F107VC MCU.
+	* arch/arm/src/stm32_serial.c and stm32_lowputc.c:  Added optional RS-485
+	  direction bit control. From Freddie Chopin.
 	* Lots of build files:  ARMv7-M and MIPS32 Make.defs now include a common
 	  Toolchain.defs file that can be used to manage toolchains in a more
 	  configurable way.  Contributed by Mike Smith
@@ -3666,4 +3668,10 @@
 	  Mike's Toolchain.defs.
 	* tools/configure.sh:  Adapted to handle paths and setenv.bat files correctly
 	  for native Windows builds.
-
+	* More of build files:  AVR and AVR32 Make.defs now include a common
+	  Toolchain.defs file that can be used to manage toolchains in a more
+	  configurable way.  Contributed by Mike Smith
+	* tools/incdir.sh and incdir.bat: Add -s option to generate system header
+	  file paths.
+	* nuttx/arch/arm/src/arm/Toolchain.defs: Add support for more ARM toolchains
+	  (from Mike Smith).

nuttx/arch/arm/Kconfig

@@ -256,6 +256,9 @@ config DEBUG_HARDFAULT
 if ARCH_CORTEXM3 || ARCH_CORTEXM4
 source arch/arm/src/armv7-m/Kconfig
 endif
+if ARCH_ARM7TDMI || ARCH_ARM926EJS
+source arch/arm/src/arm/Kconfig
+endif
 if ARCH_CHIP_C5471
 source arch/arm/src/c5471/Kconfig
 endif

nuttx/arch/arm/src/arm/Kconfig

@@ -0,0 +1,35 @@
+#
+# For a description of the syntax of this configuration file,
+# see misc/tools/kconfig-language.txt.
+#
+
+comment "ARM Configuration Options"
+
+choice
+	prompt "Toolchain Selection"
+	default ARM_TOOLCHAIN_CODESOURCERYW if HOST_WINDOWS
+	default ARM_TOOLCHAIN_GNU_EABI if !HOST_WINDOWS
+
+config ARM_TOOLCHAIN_BUILDROOT
+	bool "Buildroot (Cygwin or Linux)"
+	depends on !WINDOWS_NATIVE
+
+config ARM_TOOLCHAIN_CODESOURCERYL
+	bool "CodeSourcery GNU toolchain under Linux"
+	depends on HOST_LINUX
+
+config ARM_TOOLCHAIN_CODESOURCERYW
+	bool "CodeSourcery GNU toolchain under Windows"
+	depends on HOST_WINDOWS
+
+config ARM_TOOLCHAIN_DEVKITARM
+	bool "devkitARM GNU toolchain"
+	depends on HOST_WINDOWS
+
+config ARM_TOOLCHAIN_GNU_EABI
+	bool "Generic GNU EABI toolchain"
+	---help---
+		This option should work for any modern GNU toolchain (GCC 4.5 or newer)
+		configured for arm-none-eabi.
+
+endchoice

nuttx/arch/arm/src/arm/Toolchain.defs

@@ -0,0 +1,146 @@
+############################################################################
+# arch/arm/src/armv/Toolchain.defs
+#
+#   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+# Setup for the selected toolchain
+
+#
+# Handle old-style chip-specific toolchain names in the absence of
+# a new-style toolchain specification, force the selection of a single
+# toolchain and allow the selected toolchain to be overridden by a
+# command-line selection.
+#
+
+ifeq ($(filter y, \
+      $(CONFIG_DM320_BUILDROOT) \
+      $(CONFIG_LPC313X_BUILDROOT) \
+      $(CONFIG_LPC31_BUILDROOT) \
+      $(CONFIG_OLIMEX_LPC2378_BUILDROOT) \
+      $(CONFIG_ARM_TOOLCHAIN_BUILDROOT) \
+    ),y)
+  CONFIG_ARM_TOOLCHAIN ?= BUILDROOT
+endif
+ifeq ($(filter y, \
+      $(CONFIG_DM320_CODESOURCERYL) \
+      $(CONFIG_LPC31_CODESOURCERYL) \
+      $(CONFIG_OLIMEX_LPC2378_CODESOURCERYL) \
+      $(CONFIG_ARM_TOOLCHAIN_CODESOURCERYL) \
+    ),y)
+  CONFIG_ARM_TOOLCHAIN ?= CODESOURCERYL
+endif
+ifeq ($(filter y, \
+      $(CONFIG_DM320_CODESOURCERYW) \
+      $(CONFIG_LPC31_CODESOURCERYW) \
+      $(CONFIG_OLIMEX_LPC2378_CODESOURCERYW) \
+      $(CONFIG_ARM_TOOLCHAIN_CODESOURCERYW) \
+    ),y)
+  CONFIG_ARM_TOOLCHAIN ?= CODESOURCERYW
+endif
+ifeq ($(filter y, \
+      $(CONFIG_DM320_DEVKITARM) \
+      $(CONFIG_LPC31_DEVKITARM) \
+      $(CONFIG_OLIMEX_LPC2378_DEVKITARM) \
+      $(CONFIG_ARM_TOOLCHAIN_DEVKITARM) \
+    ),y)
+  CONFIG_ARM_TOOLCHAIN ?= DEVKITARM
+endif
+ifeq ($(filter y, \
+      $(CONFIG_ARM_TOOLCHAIN_GNU_EABI) \
+    ),y)
+  CONFIG_ARM_TOOLCHAIN ?= GNU_EABI
+endif
+
+#
+# Supported toolchains
+#
+# TODO - It's likely that all of these toolchains now support the
+#        CortexM4.  Since they are all GCC-based, we could almost
+#        certainly simplify this further.
+#
+# Each toolchain definition should set:
+#
+#  CROSSDEV         The GNU toolchain triple (command prefix)
+#  ARCROSSDEV       If required, an alternative prefix used when 
+#                   invoking ar and nm.
+#  ARCHCPUFLAGS     CPU-specific flags selecting the instruction set
+#                   FPU options, etc.
+#  MAXOPTIMIZATION  The maximum optimization level that results in
+#                   reliable code generation.
+#
+
+# NuttX buildroot under Linux or Cygwin
+
+ifeq ($(CONFIG_ARM_TOOLCHAIN),BUILDROOT)
+  CROSSDEV = arm-nuttx-elf-
+  ARCROSSDEV = arm-nuttx-elf-
+  MAXOPTIMIZATION = -Os
+endif
+
+# CodeSourcery under Linux
+
+ifeq ($(CONFIG_ARM_TOOLCHAIN),CODESOURCERYL)
+  CROSSDEV = arm-none-eabi-
+  ARCROSSDEV = arm-none-eabi-
+  MAXOPTIMIZATION = -O2
+endif
+
+# CodeSourcery under Windows
+
+ifeq ($(CONFIG_ARM_TOOLCHAIN),CODESOURCERYW)
+  CROSSDEV = arm-none-eabi-
+  ARCROSSDEV = arm-none-eabi-
+  MAXOPTIMIZATION = -O2
+  ifneq ($(CONFIG_WINDOWS_NATIVE),y)
+    WINTOOL = y
+  endif
+endif
+
+# devkitARM under Windows
+
+ifeq ($(CONFIG_ARM_TOOLCHAIN),DEVKITARM)
+  CROSSDEV = arm-eabi-
+  ARCROSSDEV = arm-eabi-
+  ifneq ($(CONFIG_WINDOWS_NATIVE),y)
+    WINTOOL = y
+  endif
+endif
+
+# Generic GNU EABI toolchain on OS X, Linux or any typical Posix system
+
+ifeq ($(CONFIG_ARM_TOOLCHAIN),GNU_EABI)
+  CROSSDEV = arm-none-eabi-
+  ARCROSSDEV = arm-none-eabi-
+  MAXOPTIMIZATION = -O3
+endif  
+

nuttx/arch/arm/src/armv7-m/Toolchain.defs

@@ -143,9 +143,9 @@ endif
 ifeq ($(CONFIG_ARMV7M_TOOLCHAIN),ATOLLIC)
   CROSSDEV = arm-atollic-eabi-
   ARCROSSDEV = arm-atollic-eabi-
-ifneq ($(CONFIG_WINDOWS_NATIVE),y)
+  ifneq ($(CONFIG_WINDOWS_NATIVE),y)
-  WINTOOL = y
+    WINTOOL = y
-endif
+  endif
   ifeq ($(CONFIG_ARCH_CORTEXM4),y)
     ifeq ($(CONFIG_ARCH_FPU),y)
       ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -march=armv7e-m -mfpu=fpv4-sp-d16 -mfloat-abi=hard
@@ -192,9 +192,9 @@ endif
 ifeq ($(CONFIG_ARMV7M_TOOLCHAIN),CODEREDW)
   CROSSDEV = arm-none-eabi-
   ARCROSSDEV = arm-none-eabi-
-ifneq ($(CONFIG_WINDOWS_NATIVE),y)
+  ifneq ($(CONFIG_WINDOWS_NATIVE),y)
-  WINTOOL = y
+    WINTOOL = y
-endif
+  endif
   ifeq ($(CONFIG_ARCH_CORTEXM4),y)
     ifeq ($(CONFIG_ARCH_FPU),y)
       ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -march=armv7e-m -mfpu=fpv4-sp-d16 -mfloat-abi=hard
@@ -220,9 +220,9 @@ endif
 ifeq ($(CONFIG_ARMV7M_TOOLCHAIN),CODESOURCERYW)
   CROSSDEV = arm-none-eabi-
   ARCROSSDEV = arm-none-eabi-
-ifneq ($(CONFIG_WINDOWS_NATIVE),y)
+  ifneq ($(CONFIG_WINDOWS_NATIVE),y)
-  WINTOOL = y
+    WINTOOL = y
-endif
+  endif
   ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
 endif
 
@@ -231,9 +231,9 @@ endif
 ifeq ($(CONFIG_ARMV7M_TOOLCHAIN),DEVKITARM)
   CROSSDEV = arm-eabi-
   ARCROSSDEV = arm-eabi-
-ifneq ($(CONFIG_WINDOWS_NATIVE),y)
+  ifneq ($(CONFIG_WINDOWS_NATIVE),y)
-  WINTOOL = y
+    WINTOOL = y
-endif
+  endif
   ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
 endif
 
@@ -259,8 +259,8 @@ endif
 ifeq ($(CONFIG_ARMV7M_TOOLCHAIN),RAISONANCE)
   CROSSDEV = arm-none-eabi-
   ARCROSSDEV = arm-none-eabi-
-ifneq ($(CONFIG_WINDOWS_NATIVE),y)
+  ifneq ($(CONFIG_WINDOWS_NATIVE),y)
-  WINTOOL = y
+    WINTOOL = y
-endif
+  endif
   ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
 endif

nuttx/arch/avr/Kconfig

@@ -5,43 +5,6 @@
 
 if ARCH_AVR
 
-choice
-	prompt "Toolchain"
-	default AVR_BUILDROOT
-
-config AVR_WINAVR
-	bool "WinAVR"
-	---help---
-		For Cygwin development environment on Windows machines, you
-		can use WinAVR: http://sourceforge.net/projects/winavr/files/
-
-		It is assumed in some places that WinAVR is installed at
-		C:/WinAVR. Edit the setenv.sh file if this is not the case.
-
-		WARNING: There is an incompatible version of cygwin.dll in
-		the WinAVR/bin directory! Make sure that the path to the
-		correct cygwin.dll file precedes the path to the WinAVR
-		binaries!
-
-config AVR_LINUXGCC
-	bool "Linux GCC"
-	---help---
-		For Linux, there are widely available avr-gcc packages. On
-		Ubuntu, use: sudo apt-get install gcc-avr gdb-avr avr-libc
-
-config AVR_BUILDROOT
-	bool "Buildroot"
-	---help---
-		There is a DIY buildroot version for the AVR boards here:
-		http://sourceforge.net/projects/nuttx/files/buildroot/. See
-		the following section for details on building this toolchain.
-
-		It is assumed in some places that buildroot toolchain is
-		available at ../misc/buildroot/build_avr. Edit the setenv.sh
-		file if this is not the case.
-
-endchoice
-
 choice
 	prompt "Atmel AVR chip selection"
 	default ARCH_CHIP_AT32UC3B0256
@@ -110,11 +73,16 @@ config ARCH_CHIP
 	default "at32uc3"	if ARCH_AT32UC3
 
 source arch/avr/src/common/Kconfig
+
+if ARCH_FAMILY_AVR
 source arch/avr/src/avr/Kconfig
 source arch/avr/src/at90usb/Kconfig
 source arch/avr/src/atmega/Kconfig
+endif
+if ARCH_FAMILY_AVR32
 source arch/avr/src/avr32/Kconfig
 source arch/avr/src/at32uc3/Kconfig
+endif
 
 config AVR_USART0
 	bool "USART0 specific serial device driver settings"

nuttx/arch/avr/src/avr/Kconfig

@@ -6,4 +6,57 @@
 if ARCH_FAMILY_AVR
 comment "AVR Configuration Options"
 
+choice
+	prompt "Toolchain"
+	default AVR_WINAVR if HOST_WINDOWS
+	default AVR_BUILDROOT if HOST_LINUX
+	default AVR_CROSSPACK if HOST_OSX
+
+config AVR_WINAVR
+	bool "WinAVR"
+	depends on HOST_WINDOWS
+	---help---
+		For Cygwin development environment on Windows machines, you
+		can use WinAVR: http://sourceforge.net/projects/winavr/files/
+
+		It is assumed in some places that WinAVR is installed at
+		C:/WinAVR. Edit the setenv.sh file if this is not the case.
+
+		WARNING: There is an incompatible version of cygwin.dll in
+		the WinAVR/bin directory! Make sure that the path to the
+		correct cygwin.dll file precedes the path to the WinAVR
+		binaries!
+
+config AVR_LINUXGCC
+	bool "Linux GCC"
+	depends on HOST_LINUX
+	---help---
+		For Linux, there are widely available avr-gcc packages. On
+		Ubuntu, use: sudo apt-get install gcc-avr gdb-avr avr-libc
+
+config AVR_CROSSPACK
+	bool "CrossPack-AVR"
+	depends on HOST_OSX
+	---help---
+		For OS X, the AVR CrossPack toolchain is supported:
+		http://www.obdev.at/products/crosspack/index.html
+
+		It is assumed that /usr/local/CrossPack-AVR/bin is on the
+		user's path. Edit the setenv.sh file if this is not the
+		case.
+
+config AVR_BUILDROOT
+	bool "Buildroot"
+	depends on HOST_LINUX || HOST_WINDOWS
+	---help---
+		There is a DIY buildroot version for the AVR boards here:
+		http://sourceforge.net/projects/nuttx/files/buildroot/. See
+		the following section for details on building this toolchain.
+
+		It is assumed in some places that buildroot toolchain is
+		available at ../misc/buildroot/build_avr. Edit the setenv.sh
+		file if this is not the case.
+
+endchoice
+
 endif

nuttx/arch/avr/src/avr/Toolchain.defs

@@ -0,0 +1,117 @@
+############################################################################
+# arch/avr/src/avr/Toolchain.defs
+#
+#   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+# Setup for the selected toolchain
+
+#
+# Handle old-style chip-specific toolchain names in the absence of
+# a new-style toolchain specification, force the selection of a single
+# toolchain and allow the selected toolchain to be overridden by a
+# command-line selection.
+#
+
+ifeq ($(filter y, \
+      $(CONFIG_AVR_BUILDROOT) \
+    ),y)
+  CONFIG_AVR_TOOLCHAIN ?= BUILDROOT
+endif
+ifeq ($(filter y, \
+      $(CONFIG_AVR_CROSSPACK) \
+    ),y)
+  CONFIG_AVR_TOOLCHAIN ?= CROSSPACK
+endif
+ifeq ($(filter y, \
+      $(CONFIG_AVR_LINUXGCC) \
+    ),y)
+  CONFIG_AVR_TOOLCHAIN ?= LINUXGCC
+endif
+ifeq ($(filter y, \
+      $(CONFIG_AVR_WINAVR) \
+    ),y)
+  CONFIG_AVR_TOOLCHAIN ?= WINAVR
+endif
+
+# Chip-specific CPU flags
+
+ifeq ($(CONFIG_ARCH_CHIP_ATMEGA128),y)
+  ARCHCPUFLAGS += -mmcu=atmega128
+else ifeq ($(CONFIG_ARCH_CHIP_AT90USB646),y)
+  ARCHCPUFLAGS += -mmcu=at90usb646
+else ifeq ($(CONFIG_ARCH_CHIP_AT90USB647),y)
+  ARCHCPUFLAGS += -mmcu=at90usb647
+else ifeq ($(CONFIG_ARCH_CHIP_AT90USB1286),y)
+  ARCHCPUFLAGS += -mmcu=at90usb1286
+else ifeq ($(CONFIG_ARCH_CHIP_AT90USB1287),y)
+  ARCHCPUFLAGS += -mmcu=at90usb1287
+else
+  $(error "No valid CONFIG_ARCH_CHIP_ set in the configuration")
+endif
+
+# NuttX buildroot GCC toolchain under Linux or Cygwin
+
+ifeq ($(CONFIG_AVR_TOOLCHAIN),BUILDROOT)
+  CROSSDEV = avr-nuttx-elf-
+  MAXOPTIMIZATION = -O2
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+
+# AVR CrossPack under OS X
+
+ifeq ($(CONFIG_AVR_TOOLCHAIN),CROSSPACK)
+  CROSSDEV = avr-
+  MAXOPTIMIZATION = -O2
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+
+# GCC toolchain under Linux
+
+ifeq ($(CONFIG_AVR_TOOLCHAIN),LINUXGCC)
+  CROSSDEV = avr-
+  MAXOPTIMIZATION = -O2
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+
+# WinAVR toolchain under Windows/Cygwin
+
+ifeq ($(CONFIG_AVR_TOOLCHAIN),WINAVR)
+  CROSSDEV = avr-
+  ifneq ($(CONFIG_WINDOWS_NATIVE),y)
+    WINTOOL = y
+  endif
+  MAXOPTIMIZATION = -O2
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+
+

nuttx/arch/avr/src/avr32/Kconfig

@@ -6,4 +6,7 @@
 if ARCH_FAMILY_AVR32
 comment "AVR32 Configuration Options"
 
+# Note - no toolchain selection here as there is only one
+# supported toolchain.
+
 endif

nuttx/arch/avr/src/avr32/Toolchain.defs

@@ -0,0 +1,63 @@
+############################################################################
+# arch/avr/src/avr32/Toolchain.defs
+#
+#   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+# Setup for the selected toolchain
+
+#
+# Since all of the supported toolchains are variants of the Atmel-patched
+# GCC, the only interesting question to answer here is whether or not
+# the build is hosted on Windows, and how to override the configuration.
+# 
+
+CROSSDEV = avr32-
+ARCHCPUFLAGS = -mpart=uc3b0256
+
+ifeq ($(filter y, \
+      $(CONFIG_AVR32_AVRTOOLSW) \
+      $(CONFIG_HOST_WINDOWS) \
+    ),y)
+  # AVR Tools under Windows
+  CONFIG_AVR32_TOOLCHAIN ?= AVRTOOLSW
+else
+  CONFIG_AVR32_TOOLCHAIN ?= GNU
+endif
+
+ifeq ($(CONFIG_AVR32_TOOLCHAIN),AVRTOOLSW)
+  ifneq ($(CONFIG_WINDOWS_NATIVE),y)
+    WINTOOL = y
+  endif
+else
+  # AVR Tools or avr32-toolchain from https://github.com/jsnyder/avr32-toolchain
+endif

nuttx/arch/mips/src/mips32/Toolchain.defs

@@ -42,6 +42,8 @@
 # command-line selection.
 #
 ifeq ($(filter y, \
+      $(CONFIG_PIC32MX_PINGUINOL) \
+      $(CONFIG_MIPS32_TOOLCHAIN_PINGUINOL) \
       $(CONFIG_MIPS32_TOOLCHAIN_GNU_ELF) \
     ),y)
   CONFIG_MIPS32_TOOLCHAIN ?= GNU_ELF
@@ -82,12 +84,6 @@ ifeq ($(filter y, \
     ),y)
   CONFIG_MIPS32_TOOLCHAIN ?= PINGUINOW
 endif
-ifeq ($(filter y, \
-      $(CONFIG_PIC32MX_PINGUINOL) \
-      $(CONFIG_MIPS32_TOOLCHAIN_PINGUINOL) \
-    ),y)
-  CONFIG_MIPS32_TOOLCHAIN ?= PINGUINOL
-endif
 
 #
 # Supported toolchains
@@ -104,6 +100,7 @@ endif
 #
 
 # Generic GNU mip32 toolchain on OS X or Linux
+# including Pinguino mips-elf toolchain
 
 ifeq ($(CONFIG_MIPS32_TOOLCHAIN),GNU_ELF)
   CROSSDEV = mips-elf-
@@ -131,9 +128,9 @@ endif
 ifeq ($(CONFIG_MIPS32_TOOLCHAIN),MICROCHIPW)
   CROSSDEV = pic32-
   # CROSSDEV = xc32-
-ifneq ($(CONFIG_WINDOWS_NATIVE),y)
+  ifneq ($(CONFIG_WINDOWS_NATIVE),y)
-  WINTOOL = y
+    WINTOOL = y
-endif
+  endif
   MAXOPTIMIZATION = -O2
   ARCHCPUFLAGS = -mprocessor=elf32pic32mx -mno-float -mlong32 -membedded-data
   ARCHPICFLAGS = -fpic -membedded-pic
@@ -158,9 +155,9 @@ endif
 ifeq ($(CONFIG_MIPS32_TOOLCHAIN),MICROCHIPW_LITE)
   CROSSDEV = pic32-
   # CROSSDEV = xc32-
-ifneq ($(CONFIG_WINDOWS_NATIVE),y)
+  ifneq ($(CONFIG_WINDOWS_NATIVE),y)
-  WINTOOL = y
+    WINTOOL = y
-endif
+  endif
   # MAXOPTIMIZATION = -O2
   ARCHCPUFLAGS = -mprocessor=elf32pic32mx -mno-float -mlong32 -membedded-data
   ARCHPICFLAGS = -fpic -membedded-pic
@@ -183,20 +180,9 @@ endif
 
 ifeq ($(CONFIG_MIPS32_TOOLCHAIN),PINGUINOW)
   CROSSDEV = mips-
-ifneq ($(CONFIG_WINDOWS_NATIVE),y)
+  ifneq ($(CONFIG_WINDOWS_NATIVE),y)
-  WINTOOL = y
+    WINTOOL = y
-endif
+  endif
-  MAXOPTIMIZATION = -O2
-  ARCHCPUFLAGS = -mlong32 -membedded-data -msoft-float -march=24kc -EL
-  ARCHPICFLAGS = -fpic -membedded-pic
-  LDFLAGS += -nostartfiles -nodefaultlibs
-  LDSCRIPT = mips-elf-debug.ld
-endif
-
-# Pinguino mips-elf toolchain under OS X or Linux
-
-ifeq ($(CONFIG_MIPS32_TOOLCHAIN),PINGUINOL)
-  CROSSDEV = mips-elf-
   MAXOPTIMIZATION = -O2
   ARCHCPUFLAGS = -mlong32 -membedded-data -msoft-float -march=24kc -EL
   ARCHPICFLAGS = -fpic -membedded-pic

nuttx/configs/amber/README.txt

@@ -187,6 +187,12 @@ Atmel AVRISP mkII Connection
 Toolchains
 ^^^^^^^^^^
 
+The toolchain may be selected using the mconf tool (via 'make menuconfig'),
+by editing the existing configuration file (defconfig), or by overriding
+the toolchain on the make commandline with CONFIG_AVR_TOOLCHAIN=<toolchain>.
+
+The valid values for <toolchain> are BUILDROOT, CROSSPACK, LINUXGCC and WINAVR.
+
 Buildroot:
 
   There is a DIY buildroot version for the AVR boards here:
@@ -223,6 +229,14 @@ Linux:
   After configuring NuttX, make sure that CONFIG_AVR_LINUXGCC=y is set in your
   .config file.
 
+Mac OS X:
+
+  For Mac OS X, the CrossPack for AVR toolchain is available from:
+
+    http://www.obdev.at/products/crosspack/index.html
+
+  This toolchain is functionally equivalent to the Linux GCC toolchain.
+
 Windows Native Toolchains
 ^^^^^^^^^^^^^^^^^^^^^^^^^
 

nuttx/configs/amber/hello/Make.defs

@@ -35,33 +35,7 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
-
+include ${TOPDIR}/arch/avr/src/avr/Toolchain.defs
-# Setup for the selected toolchain
-
-ifeq ($(CONFIG_AVR_WINAVR),y)
-  # WinAVR toolchain under Windows/Cygwin
-  CROSSDEV = avr-
-  WINTOOL = y
-  MAXOPTIMIZATION = -O2
-  ARCHCPUFLAGS = -mmcu=atmega128
-  LDFLAGS += -nostartfiles -nodefaultlibs
-endif
-
-ifeq ($(CONFIG_AVR_LINUXGCC),y)
-  # GCC toolchain under Linux
-  CROSSDEV = avr-
-  MAXOPTIMIZATION = -O2
-  ARCHCPUFLAGS = -mmcu=atmega128
-  LDFLAGS += -nostartfiles -nodefaultlibs
-endif
-
-ifeq ($(CONFIG_AVR_BUILDROOT),y)
-  # NuttX buildroot GCC toolchain under Linux or Cygwin
-  CROSSDEV = avr-nuttx-elf-
-  MAXOPTIMIZATION = -O2
-  ARCHCPUFLAGS = -mmcu=atmega128
-  LDFLAGS += -nostartfiles -nodefaultlibs
-endif
 
 ifeq ($(WINTOOL),y)
   # Windows-native toolchains

nuttx/configs/avr32dev1/README.txt

@@ -112,7 +112,7 @@ PA17 and PA23 are avaiable from the AVR32DEV1:
 Development Environment
 ^^^^^^^^^^^^^^^^^^^^^^^
 
-  Either Linux or Cygwin on Windows can be used for the development environment.
+  Linux, Mac OS X or Cygwin on Windows can be used for the development environment.
   The source has been built only using the GNU toolchain (see below).  Other
   toolchains will likely cause problems. Testing was performed using the Cygwin
   environment.
@@ -140,6 +140,16 @@ WinAVR:
   AVR32 toolchain as well as the AVR toolchain and various support
   libraries and header files.
 
+AVR32 Toolchain Builder:
+
+  A third option is to build the toolchain yourself. For OS X and Linux systems,
+  this Makefile will build a complete gcc-4.4.3 toolchain:
+
+    https://github.com/jsnyder/avr32-toolchain
+
+  By default the toolchain installs into ${HOME}/avr-32-tools-<somedate> and
+  the bin subdirectory must be added to your path before compiling.
+
 IDEs
 ^^^^
 

nuttx/configs/avr32dev1/nsh/Make.defs

@@ -35,20 +35,7 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
-
+include ${TOPDIR}/arch/avr/src/avr32/Toolchain.defs
-# Setup for the selected toolchain
-
-ifeq ($(CONFIG_AVR32_AVRTOOLSW),y)
-  # AVR Tools under Windows
-  CROSSDEV = avr32-
-  WINTOOL = y
-  ARCHCPUFLAGS = -mpart=uc3b0256
-endif
-ifeq ($(CONFIG_AVR32_AVRTOOLSL),y)
-  # AVR Tools under Linux
-  CROSSDEV = avr32-
-  ARCHCPUFLAGS = -mpart=uc3b0256
-endif
 
 ifeq ($(WINTOOL),y)
   # Windows-native toolchains

nuttx/configs/ea3131/README.txt

@@ -34,8 +34,9 @@ GNU Toolchain Options
 
   1. The CodeSourcery GNU toolchain,
   2. The devkitARM GNU toolchain,
-  3. Raisonance GNU toolchain, or
+  3. Raisonance GNU toolchain,
-  4. The NuttX buildroot Toolchain (see below).
+  4. The NuttX buildroot Toolchain (see below), or
+  5. Any generic arm-none-eabi GNU toolchain.
 
   All testing has been conducted using the NuttX buildroot toolchain.  However,
   the make system is setup to default to use the devkitARM toolchain.  To use
@@ -47,10 +48,16 @@ GNU Toolchain Options
     CONFIG_LPC31_CODESOURCERYL=y  : CodeSourcery under Linux
     CONFIG_LPC31_DEVKITARM=y      : devkitARM under Windows
     CONFIG_LPC31_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin (default)
+    CONFIG_ARM_TOOLCHAIN_GNU_EABI : Generic arm-none-eabi toolchain
 
   If you are not using CONFIG_LPC31_BUILDROOT, then you may also have to modify
   the PATH in the setenv.h file if your make cannot find the tools.
 
+  The toolchain may also be set using the mconf utility (make menuconfig) or by
+  passing CONFIG_ARM_TOOLCHAIN=<toolchain> to make, where <toolchain> is one
+  of CODESOURCERYW, CODESOURCERYL, DEVKITARM, BUILDROOT or GNU_EABI as described
+  above.
+
   NOTE: the CodeSourcery (for Windows), devkitARM, and Raisonance toolchains are
   Windows native toolchains.  The CodeSourcey (for Linux) and NuttX buildroot
   toolchains are Cygwin and/or Linux native toolchains. There are several limitations
@@ -87,6 +94,23 @@ GNU Toolchain Options
   the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
   path or will get the wrong version of make.
 
+  Generic arm-none-eabi GNU Toolchain
+  -----------------------------------
+  There are a number of toolchain projects providing support for ARMv4/v5
+  class processors, including:
+
+    GCC ARM Embedded
+      https://launchpad.net/gcc-arm-embedded
+
+    Summon ARM Toolchain
+      https://github.com/esden/summon-arm-toolchain
+
+    Yagarto
+      http://www.yagarto.de
+
+  Others exist for various Linux distributions, MacPorts, etc.  Any version
+  based on GCC 4.6.3 or later should work.
+
 IDEs
 ^^^^
 

nuttx/configs/ea3131/nsh/Make.defs

@@ -35,30 +35,7 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
-
+include ${TOPDIR}/arch/arm/src/arm/Toolchain.defs
-# Setup for the selected toolchain
-
-ifeq ($(CONFIG_LPC31_CODESOURCERYW),y)
-  # CodeSourcery under Windows
-  CROSSDEV = arm-none-eabi-
-  WINTOOL = y
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_LPC31_CODESOURCERYL),y)
-  # CodeSourcery under Linux
-  CROSSDEV = arm-none-eabi-
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_LPC31_DEVKITARM),y)
-  # devkitARM under Windows
-  CROSSDEV = arm-eabi-
-  WINTOOL = y
-endif
-ifeq ($(CONFIG_LPC31_BUILDROOT),y)
-  # NuttX buildroot under Linux or Cygwin
-  CROSSDEV = arm-nuttx-elf-
-  MAXOPTIMIZATION = -Os
-endif
 
 ifeq ($(WINTOOL),y)
   # Windows-native toolchains

nuttx/configs/ea3131/ostest/Make.defs

@@ -35,30 +35,7 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
-
+include ${TOPDIR}/arch/arm/src/arm/Toolchain.defs
-# Setup for the selected toolchain
-
-ifeq ($(CONFIG_LPC31_CODESOURCERYW),y)
-  # CodeSourcery under Windows
-  CROSSDEV = arm-none-eabi-
-  WINTOOL = y
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_LPC31_CODESOURCERYL),y)
-  # CodeSourcery under Linux
-  CROSSDEV = arm-none-eabi-
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_LPC31_DEVKITARM),y)
-  # devkitARM under Windows
-  CROSSDEV = arm-eabi-
-  WINTOOL = y
-endif
-ifeq ($(CONFIG_LPC31_BUILDROOT),y)
-  # NuttX buildroot under Linux or Cygwin
-  CROSSDEV = arm-nuttx-elf-
-  MAXOPTIMIZATION = -Os
-endif
 
 ifeq ($(WINTOOL),y)
   # Windows-native toolchains

nuttx/configs/ea3131/pgnsh/Make.defs

@@ -35,30 +35,7 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
-
+include ${TOPDIR}/arch/arm/src/arm/Toolchain.defs
-# Setup for the selected toolchain
-
-ifeq ($(CONFIG_LPC31_CODESOURCERYW),y)
-  # CodeSourcery under Windows
-  CROSSDEV = arm-none-eabi-
-  WINTOOL = y
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_LPC31_CODESOURCERYL),y)
-  # CodeSourcery under Linux
-  CROSSDEV = arm-none-eabi-
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_LPC31_DEVKITARM),y)
-  # devkitARM under Windows
-  CROSSDEV = arm-eabi-
-  WINTOOL = y
-endif
-ifeq ($(CONFIG_LPC31_BUILDROOT),y)
-  # NuttX buildroot under Linux or Cygwin
-  CROSSDEV = arm-nuttx-elf-
-  MAXOPTIMIZATION = -Os
-endif
 
 ifeq ($(WINTOOL),y)
   # Windows-native toolchains

nuttx/configs/ea3131/usbserial/Make.defs

@@ -35,30 +35,7 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
-
+include ${TOPDIR}/arch/arm/src/arm/Toolchain.defs
-# Setup for the selected toolchain
-
-ifeq ($(CONFIG_LPC31_CODESOURCERYW),y)
-  # CodeSourcery under Windows
-  CROSSDEV = arm-none-eabi-
-  WINTOOL = y
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_LPC31_CODESOURCERYL),y)
-  # CodeSourcery under Linux
-  CROSSDEV = arm-none-eabi-
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_LPC31_DEVKITARM),y)
-  # devkitARM under Windows
-  CROSSDEV = arm-eabi-
-  WINTOOL = y
-endif
-ifeq ($(CONFIG_LPC31_BUILDROOT),y)
-  # NuttX buildroot under Linux or Cygwin
-  CROSSDEV = arm-nuttx-elf-
-  MAXOPTIMIZATION = -Os
-endif
 
 ifeq ($(WINTOOL),y)
   # Windows-native toolchains

nuttx/configs/ea3131/usbstorage/Make.defs

@@ -35,30 +35,7 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
-
+include ${TOPDIR}/arch/arm/src/arm/Toolchain.defs
-# Setup for the selected toolchain
-
-ifeq ($(CONFIG_LPC31_CODESOURCERYW),y)
-  # CodeSourcery under Windows
-  CROSSDEV = arm-none-eabi-
-  WINTOOL = y
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_LPC31_CODESOURCERYL),y)
-  # CodeSourcery under Linux
-  CROSSDEV = arm-none-eabi-
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_LPC31_DEVKITARM),y)
-  # devkitARM under Windows
-  CROSSDEV = arm-eabi-
-  WINTOOL = y
-endif
-ifeq ($(CONFIG_LPC31_BUILDROOT),y)
-  # NuttX buildroot under Linux or Cygwin
-  CROSSDEV = arm-nuttx-elf-
-  MAXOPTIMIZATION = -Os
-endif
 
 ifeq ($(WINTOOL),y)
   # Windows-native toolchains

nuttx/configs/ea3152/README.txt

@@ -33,8 +33,9 @@ GNU Toolchain Options
 
   1. The CodeSourcery GNU toolchain,
   2. The devkitARM GNU toolchain,
-  3. Raisonance GNU toolchain, or
+  3. Raisonance GNU toolchain,
-  4. The NuttX buildroot Toolchain (see below).
+  4. The NuttX buildroot Toolchain (see below), or
+  5. Any generic arm-none-eabi GNU toolchain.
 
   All testing has been conducted using the NuttX buildroot toolchain.  However,
   the make system is setup to default to use the devkitARM toolchain.  To use
@@ -46,10 +47,16 @@ GNU Toolchain Options
     CONFIG_LPC31_CODESOURCERYL=y  : CodeSourcery under Linux
     CONFIG_LPC31_DEVKITARM=y      : devkitARM under Windows
     CONFIG_LPC31_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin (default)
+    CONFIG_ARM_TOOLCHAIN_GNU_EABI : Generic arm-none-eabi toolchain
 
   If you are not using CONFIG_LPC31_BUILDROOT, then you may also have to modify
   the PATH in the setenv.h file if your make cannot find the tools.
 
+  The toolchain may also be set using the mconf utility (make menuconfig) or by
+  passing CONFIG_ARM_TOOLCHAIN=<toolchain> to make, where <toolchain> is one
+  of CODESOURCERYW, CODESOURCERYL, DEVKITARM, BUILDROOT or GNU_EABI as described
+  above.
+
   NOTE: the CodeSourcery (for Windows), devkitARM, and Raisonance toolchains are
   Windows native toolchains.  The CodeSourcey (for Linux) and NuttX buildroot
   toolchains are Cygwin and/or Linux native toolchains. There are several limitations
@@ -85,6 +92,23 @@ GNU Toolchain Options
   NOTE 2: The devkitARM toolchain includes a version of MSYS make.  Make sure that
   the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
   path or will get the wrong version of make.
+ 
+  Generic arm-none-eabi GNU Toolchain
+  -----------------------------------
+  There are a number of toolchain projects providing support for ARMv4/v5
+  class processors, including:
+
+    GCC ARM Embedded
+      https://launchpad.net/gcc-arm-embedded
+
+    Summon ARM Toolchain
+      https://github.com/esden/summon-arm-toolchain
+
+    Yagarto
+      http://www.yagarto.de
+
+  Others exist for various Linux distributions, MacPorts, etc.  Any version
+  based on GCC 4.6.3 or later should work.
 
 IDEs
 ^^^^

nuttx/configs/ea3152/ostest/Make.defs

@@ -35,30 +35,7 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
-
+include ${TOPDIR}/arch/arm/src/arm/Toolchain.defs
-# Setup for the selected toolchain
-
-ifeq ($(CONFIG_LPC31_CODESOURCERYW),y)
-  # CodeSourcery under Windows
-  CROSSDEV = arm-none-eabi-
-  WINTOOL = y
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_LPC31_CODESOURCERYL),y)
-  # CodeSourcery under Linux
-  CROSSDEV = arm-none-eabi-
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_LPC31_DEVKITARM),y)
-  # devkitARM under Windows
-  CROSSDEV = arm-eabi-
-  WINTOOL = y
-endif
-ifeq ($(CONFIG_LPC31_BUILDROOT),y)
-  # NuttX buildroot under Linux or Cygwin
-  CROSSDEV = arm-nuttx-elf-
-  MAXOPTIMIZATION = -Os
-endif
 
 ifeq ($(WINTOOL),y)
   # Windows-native toolchains

nuttx/configs/micropendous3/README.txt

@@ -198,7 +198,13 @@ Toolchains
 
 There are several toolchain options.  However, testing has been performed
 using *only* the NuttX buildroot toolchain described below.  Therefore,
-the NuttX buildroot toolchain is the recommended choice:
+the NuttX buildroot toolchain is the recommended choice.
+
+The toolchain may be selected using the mconf tool (via 'make menuconfig'),
+by editing the existing configuration file (defconfig), or by overriding
+the toolchain on the make commandline with CONFIG_AVR_TOOLCHAIN=<toolchain>.
+
+The valid values for <toolchain> are BUILDROOT, CROSSPACK, LINUXGCC and WINAVR.
 
 Buildroot:
 
@@ -236,6 +242,14 @@ Linux:
   After configuring NuttX, make sure that CONFIG_AVR_LINUXGCC=y is set in your
   .config file.
 
+Mac OS X:
+
+  For Mac OS X, the CrossPack for AVR toolchain is available from:
+
+    http://www.obdev.at/products/crosspack/index.html
+
+  This toolchain is functionally equivalent to the Linux GCC toolchain.
+
 Windows Native Toolchains
 ^^^^^^^^^^^^^^^^^^^^^^^^^
 

nuttx/configs/micropendous3/hello/Make.defs

@@ -35,33 +35,7 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
-
+include ${TOPDIR}/arch/avr/src/avr/Toolchain.defs
-# Setup for the selected toolchain
-
-ifeq ($(CONFIG_AVR_WINAVR),y)
-  # WinAVR toolchain under Windows/Cygwin
-  CROSSDEV = avr-
-  WINTOOL = y
-  MAXOPTIMIZATION = -O2
-  ARCHCPUFLAGS = -mmcu=at90usb647
-  LDFLAGS += -nostartfiles -nodefaultlibs
-endif
-
-ifeq ($(CONFIG_AVR_LINUXGCC),y)
-  # GCC toolchain under Linux
-  CROSSDEV = avr-
-  MAXOPTIMIZATION = -O2
-  ARCHCPUFLAGS = -mmcu=at90usb647
-  LDFLAGS += -nostartfiles -nodefaultlibs
-endif
-
-ifeq ($(CONFIG_AVR_BUILDROOT),y)
-  # NuttX buildroot GCC toolchain under Linux or Cygwin
-  CROSSDEV = avr-nuttx-elf-
-  MAXOPTIMIZATION = -O2
-  ARCHCPUFLAGS = -mmcu=at90usb647
-  LDFLAGS += -nostartfiles -nodefaultlibs
-endif
 
 ifeq ($(WINTOOL),y)
   # Windows-native toolchains

nuttx/configs/mirtoo/README.txt

@@ -323,6 +323,12 @@ Additional signals available via Peripheral Pin Selections (PPS)
 Toolchains
 ==========
 
+  Note that in addition to the configuration options listed below, the
+  toolchain can be configured using the mconf utility ('make menuconfig')
+  or by passing CONFIG_MIPS32_TOOLCHAIN=<toolchain> to make, where
+  <toolchain> is one of GNU_ELF, MICROCHIPL, MICROCHIPW, MICROCHIPL_LITE,
+  MICROCHIPW_LITE, MICROCHIPOPENL or PINGUINOW as described below.
+
   MPLAB/C32
   ---------
 
@@ -376,7 +382,7 @@ Toolchains
      Note that the tools will have the prefix, mypic32- so, for example, the
      compiler will be called mypic32-gcc.
 
-  Pinguino mips-elf Toolchain
+  Pinguino mips-elf / Generic mips-elf Toolchain
   ---------------------------
 
   Another option is the mips-elf toolchain used with the Pinguino project.  This
@@ -390,12 +396,15 @@ Toolchains
   configurations.  Use one of these configuration options to select the Pinguino
   mips-elf toolchain:
 
-    CONFIG_PIC32MX_PINGUINOW - Pinguino mips-elf toolchain for Windows
+    CONFIG_PIC32MX_PINGUINOW        - Pinguino mips-elf toolchain for Windows
-    CONFIG_PIC32MX_PINGUINOL - Pinguino mips toolchain for Linux
+    CONFIG_MIPS32_TOOLCHAIN_GNU_ELF - mips-elf toolchain for Linux or OS X
 
   And set the path appropriately in the setenv.sh file.  These tool configurations
   are untested -- expect some additional integration issues.  Good luck!
 
+  This configuration will also work with any generic mips-elf GCC past version
+  4.6 or so.
+
   MPLAB/C32 vs MPLABX/X32
   -----------------------
 

nuttx/configs/ntosd-dm320/README.txt

@@ -54,7 +54,8 @@ GNU Toolchain Options
   1. The CodeSourcery GNU toolchain,
   2. The devkitARM GNU toolchain,
   3. Raisonance GNU toolchain, or
-  4. The NuttX buildroot Toolchain (see below).
+  4. The NuttX buildroot Toolchain (see below), or
+  5. Any generic arm-none-eabi GNU toolchain.
 
   All testing has been conducted using the NuttX buildroot toolchain.  However,
   the make system is setup to default to use the devkitARM toolchain.  To use
@@ -65,11 +66,17 @@ GNU Toolchain Options
     CONFIG_DM320_CODESOURCERYW=y  : CodeSourcery under Windows
     CONFIG_DM320_CODESOURCERYL=y  : CodeSourcery under Linux
     CONFIG_DM320_DEVKITARM=y      : devkitARM under Windows
-    CONFIG_DM320_BUILDROOT=y	  : NuttX buildroot under Linux or Cygwin (default)
+    CONFIG_DM320_BUILDROOT=y	    : NuttX buildroot under Linux or Cygwin (default)
+    CONFIG_ARM_TOOLCHAIN_GNU_EABI : Generic arm-none-eabi toolchain
 
   If you are not using CONFIG_DM320_BUILDROOT, then you may also have to modify
   the PATH in the setenv.h file if your make cannot find the tools.
 
+  The toolchain may also be set using the mconf utility (make menuconfig) or by
+  passing CONFIG_ARM_TOOLCHAIN=<toolchain> to make, where <toolchain> is one
+  of CODESOURCERYW, CODESOURCERYL, DEVKITARM, BUILDROOT or GNU_EABI as described
+  above.
+
   NOTE: the CodeSourcery (for Windows), devkitARM, and Raisonance toolchains are
   Windows native toolchains.  The CodeSourcey (for Linux) and NuttX buildroot
   toolchains are Cygwin and/or Linux native toolchains. There are several limitations
@@ -105,6 +112,23 @@ GNU Toolchain Options
   NOTE 2: The devkitARM toolchain includes a version of MSYS make.  Make sure that
   the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
   path or will get the wrong version of make.
+ 
+  Generic arm-none-eabi GNU Toolchain
+  -----------------------------------
+  There are a number of toolchain projects providing support for ARMv4/v5
+  class processors, including:
+
+    GCC ARM Embedded
+      https://launchpad.net/gcc-arm-embedded
+
+    Summon ARM Toolchain
+      https://github.com/esden/summon-arm-toolchain
+
+    Yagarto
+      http://www.yagarto.de
+
+  Others exist for various Linux distributions, MacPorts, etc.  Any version
+  based on GCC 4.6.3 or later should work.
 
 IDEs
 ^^^^

nuttx/configs/ntosd-dm320/nettest/Make.defs

@@ -35,30 +35,7 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
-
+include ${TOPDIR}/arch/arm/src/arm/Toolchain.defs
-# Setup for the selected toolchain
-
-ifeq ($(CONFIG_DM320_CODESOURCERYW),y)
-  # CodeSourcery under Windows
-  CROSSDEV = arm-none-eabi-
-  WINTOOL = y
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_DM320_CODESOURCERYL),y)
-  # CodeSourcery under Linux
-  CROSSDEV = arm-none-eabi-
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_DM320_DEVKITARM),y)
-  # devkitARM under Windows
-  CROSSDEV = arm-eabi-
-  WINTOOL = y
-endif
-ifeq ($(CONFIG_DM320_BUILDROOT),y)
-  # NuttX buildroot under Linux or Cygwin
-  CROSSDEV = arm-nuttx-elf-
-  MAXOPTIMIZATION = -Os
-endif
 
 ifeq ($(WINTOOL),y)
   # Windows-native toolchains

nuttx/configs/ntosd-dm320/nsh/Make.defs

@@ -35,30 +35,7 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
-
+include ${TOPDIR}/arch/arm/src/arm/Toolchain.defs
-# Setup for the selected toolchain
-
-ifeq ($(CONFIG_DM320_CODESOURCERYW),y)
-  # CodeSourcery under Windows
-  CROSSDEV = arm-none-eabi-
-  WINTOOL = y
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_DM320_CODESOURCERYL),y)
-  # CodeSourcery under Linux
-  CROSSDEV = arm-none-eabi-
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_DM320_DEVKITARM),y)
-  # devkitARM under Windows
-  CROSSDEV = arm-eabi-
-  WINTOOL = y
-endif
-ifeq ($(CONFIG_DM320_BUILDROOT),y)
-  # NuttX buildroot under Linux or Cygwin
-  CROSSDEV = arm-nuttx-elf-
-  MAXOPTIMIZATION = -Os
-endif
 
 ifeq ($(WINTOOL),y)
   # Windows-native toolchains

nuttx/configs/ntosd-dm320/ostest/Make.defs

@@ -35,30 +35,7 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
-
+include ${TOPDIR}/arch/arm/src/arm/Toolchain.defs
-# Setup for the selected toolchain
-
-ifeq ($(CONFIG_DM320_CODESOURCERYW),y)
-  # CodeSourcery under Windows
-  CROSSDEV = arm-none-eabi-
-  WINTOOL = y
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_DM320_CODESOURCERYL),y)
-  # CodeSourcery under Linux
-  CROSSDEV = arm-none-eabi-
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_DM320_DEVKITARM),y)
-  # devkitARM under Windows
-  CROSSDEV = arm-eabi-
-  WINTOOL = y
-endif
-ifeq ($(CONFIG_DM320_BUILDROOT),y)
-  # NuttX buildroot under Linux or Cygwin
-  CROSSDEV = arm-nuttx-elf-
-  MAXOPTIMIZATION = -Os
-endif
 
 ifeq ($(WINTOOL),y)
   # Windows-native toolchains

nuttx/configs/ntosd-dm320/poll/Make.defs

@@ -35,30 +35,7 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
-
+include ${TOPDIR}/arch/arm/src/arm/Toolchain.defs
-# Setup for the selected toolchain
-
-ifeq ($(CONFIG_DM320_CODESOURCERYW),y)
-  # CodeSourcery under Windows
-  CROSSDEV = arm-none-eabi-
-  WINTOOL = y
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_DM320_CODESOURCERYL),y)
-  # CodeSourcery under Linux
-  CROSSDEV = arm-none-eabi-
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_DM320_DEVKITARM),y)
-  # devkitARM under Windows
-  CROSSDEV = arm-eabi-
-  WINTOOL = y
-endif
-ifeq ($(CONFIG_DM320_BUILDROOT),y)
-  # NuttX buildroot under Linux or Cygwin
-  CROSSDEV = arm-nuttx-elf-
-  MAXOPTIMIZATION = -Os
-endif
 
 ifeq ($(WINTOOL),y)
   # Windows-native toolchains

nuttx/configs/ntosd-dm320/thttpd/Make.defs

@@ -35,30 +35,7 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
-
+include ${TOPDIR}/arch/arm/src/arm/Toolchain.defs
-# Setup for the selected toolchain
-
-ifeq ($(CONFIG_DM320_CODESOURCERYW),y)
-  # CodeSourcery under Windows
-  CROSSDEV = arm-none-eabi-
-  WINTOOL = y
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_DM320_CODESOURCERYL),y)
-  # CodeSourcery under Linux
-  CROSSDEV = arm-none-eabi-
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_DM320_DEVKITARM),y)
-  # devkitARM under Windows
-  CROSSDEV = arm-eabi-
-  WINTOOL = y
-endif
-ifeq ($(CONFIG_DM320_BUILDROOT),y)
-  # NuttX buildroot under Linux or Cygwin
-  CROSSDEV = arm-nuttx-elf-
-  MAXOPTIMIZATION = -Os
-endif
 
 ifeq ($(WINTOOL),y)
   # Windows-native toolchains

nuttx/configs/ntosd-dm320/udp/Make.defs

@@ -35,30 +35,7 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
-
+include ${TOPDIR}/arch/arm/src/arm/Toolchain.defs
-# Setup for the selected toolchain
-
-ifeq ($(CONFIG_DM320_CODESOURCERYW),y)
-  # CodeSourcery under Windows
-  CROSSDEV = arm-none-eabi-
-  WINTOOL = y
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_DM320_CODESOURCERYL),y)
-  # CodeSourcery under Linux
-  CROSSDEV = arm-none-eabi-
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_DM320_DEVKITARM),y)
-  # devkitARM under Windows
-  CROSSDEV = arm-eabi-
-  WINTOOL = y
-endif
-ifeq ($(CONFIG_DM320_BUILDROOT),y)
-  # NuttX buildroot under Linux or Cygwin
-  CROSSDEV = arm-nuttx-elf-
-  MAXOPTIMIZATION = -Os
-endif
 
 ifeq ($(WINTOOL),y)
   # Windows-native toolchains

nuttx/configs/ntosd-dm320/uip/Make.defs

@@ -35,30 +35,7 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
-
+include ${TOPDIR}/arch/arm/src/arm/Toolchain.defs
-# Setup for the selected toolchain
-
-ifeq ($(CONFIG_DM320_CODESOURCERYW),y)
-  # CodeSourcery under Windows
-  CROSSDEV = arm-none-eabi-
-  WINTOOL = y
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_DM320_CODESOURCERYL),y)
-  # CodeSourcery under Linux
-  CROSSDEV = arm-none-eabi-
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_DM320_DEVKITARM),y)
-  # devkitARM under Windows
-  CROSSDEV = arm-eabi-
-  WINTOOL = y
-endif
-ifeq ($(CONFIG_DM320_BUILDROOT),y)
-  # NuttX buildroot under Linux or Cygwin
-  CROSSDEV = arm-nuttx-elf-
-  MAXOPTIMIZATION = -Os
-endif
 
 ifeq ($(WINTOOL),y)
   # Windows-native toolchains

nuttx/configs/olimex-lpc2378/nsh/Make.defs

@@ -40,30 +40,7 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
-
+include ${TOPDIR}/arch/arm/src/arm/Toolchain.defs
-# Setup for the selected toolchain
-
-ifeq ($(CONFIG_OLIMEX_LPC2378_CODESOURCERYW),y)
-  # CodeSourcery under Windows
-  CROSSDEV = arm-none-eabi-
-  WINTOOL = y
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_OLIMEX_LPC2378_CODESOURCERYL),y)
-  # CodeSourcery under Linux
-  CROSSDEV = arm-none-eabi-
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_OLIMEX_LPC2378_DEVKITARM),y)
-  # devkitARM under Windows
-  CROSSDEV = arm-eabi-
-  WINTOOL = y
-endif
-ifeq ($(CONFIG_OLIMEX_LPC2378_BUILDROOT),y)
-  # NuttX buildroot under Linux or Cygwin
-  CROSSDEV = arm-nuttx-elf-
-  MAXOPTIMIZATION = -Os
-endif
 
 ifeq ($(WINTOOL),y)
   # Windows-native toolchains

nuttx/configs/olimex-lpc2378/ostest/Make.defs

@@ -40,30 +40,7 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
-
+include ${TOPDIR}/arch/arm/src/arm/Toolchain.defs
-# Setup for the selected toolchain
-
-ifeq ($(CONFIG_OLIMEX_LPC2378_CODESOURCERYW),y)
-  # CodeSourcery under Windows
-  CROSSDEV = arm-none-eabi-
-  WINTOOL = y
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_OLIMEX_LPC2378_CODESOURCERYL),y)
-  # CodeSourcery under Linux
-  CROSSDEV = arm-none-eabi-
-  MAXOPTIMIZATION = -O2
-endif
-ifeq ($(CONFIG_OLIMEX_LPC2378_DEVKITARM),y)
-  # devkitARM under Windows
-  CROSSDEV = arm-eabi-
-  WINTOOL = y
-endif
-ifeq ($(CONFIG_OLIMEX_LPC2378_BUILDROOT),y)
-  # NuttX buildroot under Linux or Cygwin
-  CROSSDEV = arm-nuttx-elf-
-  MAXOPTIMIZATION = -Os
-endif
 
 ifeq ($(WINTOOL),y)
   # Windows-native toolchains

nuttx/configs/stm3220g-eval/README.txt

@@ -26,7 +26,7 @@ Contents
 Development Environment
 =======================
 
-  Either Linux or Cygwin on Windows can be used for the development environment.
+  Linux, OS X or Cygwin on Windows can be used for the development environment.
   The source has been built only using the GNU toolchain (see below).  Other
   toolchains will likely cause problems. Testing was performed using the Cygwin
   environment because the Raisonance R-Link emulatator and some RIDE7 development tools
@@ -43,8 +43,9 @@ GNU Toolchain Options
   1. The CodeSourcery GNU toolchain,
   2. The Atollic Toolchain,
   3. The devkitARM GNU toolchain,
-  4. Raisonance GNU toolchain, or
+  4. Raisonance GNU toolchain, 
-  5. The NuttX buildroot Toolchain (see below).
+  5. The NuttX buildroot Toolchain (see below), or
+  6. Any generic arm-none-eabi GNU toolchain.
 
   Most testing has been conducted using the CodeSourcery toolchain for Windows and
   that is the default toolchain in most configurations.  To use the Atollic
@@ -59,10 +60,16 @@ GNU Toolchain Options
     CONFIG_STM32_DEVKITARM=y      : devkitARM under Windows
     CONFIG_STM32_RAISONANCE=y     : Raisonance RIDE7 under Windows
     CONFIG_STM32_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin (default)
+    CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI : Generic arm-none-eabi toolchain
 
   If you change the default toolchain, then you may also have to modify the PATH in
   the setenv.h file if your make cannot find the tools.
 
+  The toolchain may also be set using the mconf utility (make menuconfig) or by
+  passing CONFIG_ARMV7M_TOOLCHAIN=<toolchain> to make, where <toolchain> is one
+  of CODESOURCERYW, CODESOURCERYL, ATOLLOC, DEVKITARM, RAISONANCE, BUILDROOT or
+  GNU_EABI as described above.
+
   NOTE: the CodeSourcery (for Windows), Atollic, devkitARM, and Raisonance toolchains are
   Windows native toolchains.  The CodeSourcey (for Linux) and NuttX buildroot
   toolchains are Cygwin and/or Linux native toolchains. There are several limitations
@@ -133,6 +140,26 @@ GNU Toolchain Options
   the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
   path or will get the wrong version of make.
 
+  Generic arm-none-eabi GNU Toolchain
+  -----------------------------------
+  There are a number of toolchain projects providing support for the Cortex-M
+  class processors, including:
+
+    GCC ARM Embedded
+      https://launchpad.net/gcc-arm-embedded
+
+    Thumb2 Newlib Toolchain
+      https://github.com/EliasOenal/TNT
+
+    Summon ARM Toolchain
+      https://github.com/esden/summon-arm-toolchain
+
+    Yagarto
+      http://www.yagarto.de
+
+  Others exist for various Linux distributions, MacPorts, etc.  Any version
+  based on GCC 4.6.3 or later should work.
+
 IDEs
 ====
 

nuttx/configs/teensy/README.txt

@@ -201,7 +201,13 @@ Toolchains
 
 There are several toolchain options.  However, testing has been performed
 using *only* the NuttX buildroot toolchain described below.  Therefore,
-the NuttX buildroot toolchain is the recommended choice:
+the NuttX buildroot toolchain is the recommended choice.
+
+The toolchain may be selected using the mconf tool (via 'make menuconfig'),
+by editing the existing configuration file (defconfig), or by overriding
+the toolchain on the make commandline with CONFIG_AVR_TOOLCHAIN=<toolchain>.
+
+The valid values for <toolchain> are BUILDROOT, CROSSPACK, LINUXGCC and WINAVR.
 
 Buildroot:
 
@@ -239,6 +245,14 @@ Linux:
   After configuring NuttX, make sure that CONFIG_AVR_LINUXGCC=y is set in your
   .config file.
 
+Mac OS X:
+
+  For Mac OS X, the CrossPack for AVR toolchain is available from:
+
+    http://www.obdev.at/products/crosspack/index.html
+
+  This toolchain is functionally equivalent to the Linux GCC toolchain.
+
 Windows Native Toolchains
 ^^^^^^^^^^^^^^^^^^^^^^^^^
 

nuttx/configs/teensy/hello/Make.defs

@@ -35,33 +35,7 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
-
+include ${TOPDIR}/arch/avr/src/avr/Toolchain.defs
-# Setup for the selected toolchain
-
-ifeq ($(CONFIG_AVR_WINAVR),y)
-  # WinAVR toolchain under Windows/Cygwin
-  CROSSDEV = avr-
-  WINTOOL = y
-  MAXOPTIMIZATION = -O2
-  ARCHCPUFLAGS = -mmcu=at90usb1286
-  LDFLAGS += -nostartfiles -nodefaultlibs
-endif
-
-ifeq ($(CONFIG_AVR_LINUXGCC),y)
-  # GCC toolchain under Linux
-  CROSSDEV = avr-
-  MAXOPTIMIZATION = -O2
-  ARCHCPUFLAGS = -mmcu=at90usb1286
-  LDFLAGS += -nostartfiles -nodefaultlibs
-endif
-
-ifeq ($(CONFIG_AVR_BUILDROOT),y)
-  # NuttX buildroot GCC toolchain under Linux or Cygwin
-  CROSSDEV = avr-nuttx-elf-
-  MAXOPTIMIZATION = -O2
-  ARCHCPUFLAGS = -mmcu=at90usb1286
-  LDFLAGS += -nostartfiles -nodefaultlibs
-endif
 
 ifeq ($(WINTOOL),y)
   # Windows-native toolchains

nuttx/configs/teensy/nsh/Make.defs

@@ -35,33 +35,7 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
-
+include ${TOPDIR}/arch/avr/src/avr/Toolchain.defs
-# Setup for the selected toolchain
-
-ifeq ($(CONFIG_AVR_WINAVR),y)
-  # WinAVR toolchain under Windows/Cygwin
-  CROSSDEV = avr-
-  WINTOOL = y
-  MAXOPTIMIZATION = -O2
-  ARCHCPUFLAGS = -mmcu=at90usb1286
-  LDFLAGS += -nostartfiles -nodefaultlibs
-endif
-
-ifeq ($(CONFIG_AVR_LINUXGCC),y)
-  # GCC toolchain under Linux
-  CROSSDEV = avr-
-  MAXOPTIMIZATION = -O2
-  ARCHCPUFLAGS = -mmcu=at90usb1286
-  LDFLAGS += -nostartfiles -nodefaultlibs
-endif
-
-ifeq ($(CONFIG_AVR_BUILDROOT),y)
-  # NuttX buildroot GCC toolchain under Linux or Cygwin
-  CROSSDEV = avr-nuttx-elf-
-  MAXOPTIMIZATION = -O2
-  ARCHCPUFLAGS = -mmcu=at90usb1286
-  LDFLAGS += -nostartfiles -nodefaultlibs
-endif
 
 ifeq ($(WINTOOL),y)
   # Windows-native toolchains

nuttx/configs/teensy/usbstorage/Make.defs

@@ -35,33 +35,7 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
-
+include ${TOPDIR}/arch/avr/src/avr/Toolchain.defs
-# Setup for the selected toolchain
-
-ifeq ($(CONFIG_AVR_WINAVR),y)
-  # WinAVR toolchain under Windows/Cygwin
-  CROSSDEV = avr-
-  WINTOOL = y
-  MAXOPTIMIZATION = -O2
-  ARCHCPUFLAGS = -mmcu=at90usb1286
-  LDFLAGS += -nostartfiles -nodefaultlibs
-endif
-
-ifeq ($(CONFIG_AVR_LINUXGCC),y)
-  # GCC toolchain under Linux
-  CROSSDEV = avr-
-  MAXOPTIMIZATION = -O2
-  ARCHCPUFLAGS = -mmcu=at90usb1286
-  LDFLAGS += -nostartfiles -nodefaultlibs
-endif
-
-ifeq ($(CONFIG_AVR_BUILDROOT),y)
-  # NuttX buildroot GCC toolchain under Linux or Cygwin
-  CROSSDEV = avr-nuttx-elf-
-  MAXOPTIMIZATION = -O2
-  ARCHCPUFLAGS = -mmcu=at90usb1286
-  LDFLAGS += -nostartfiles -nodefaultlibs
-endif
 
 ifeq ($(WINTOOL),y)
   # Windows-native toolchains

nuttx/tools/incdir.bat

@@ -36,14 +36,21 @@ rem
 rem Handle command line options
 
 set progname=%0
+set pathtype=user
 
 :ArgLoop
 
-rem [-d] [-w] [-h]. [-w] and [-d] Ignored for compatibility with incdir.sh
+rem [-d] [-w] [-s] [-h]. [-w] and [-d] Ignored for compatibility with incdir.sh
 
 if "%1"=="-d" goto :NextArg
 if "%1"=="-w" goto :NextArg
 if "%1"=="-h" goto :Usage
+
+if "%1"=="-s" (
+  set pathtype=system
+  goto :NextArg
+)
+
 goto :CheckCompiler
 
 :NextArg
@@ -97,21 +104,43 @@ if not exist %1 (
 )
 
 if "%fmt%"=="zds" goto :GenerateZdsPath
+if "%response%"=="" goto :FirstStdPath
+if "%pathtype%"=="system" goto :NextStdSystemPath
 
-if "%response"=="" (
+set response=%response% -I "%1"
-  set response=-I "%1"
+goto :EndOfDirLoop
-) else (
+
-  set response=%response% -I "%1"
+:NextStdSystemPath
-)
+
+set response=%response% -isystem "%1"
+goto :EndOfDirLoop
+
+:FirstStdPath
+
+if "%pathtype%"=="system" goto :FirstStdSystemPath
+set response=-I "%1"
+goto :EndOfDirLoop
+
+:FirstStdSystemPath
+
+set response=-isystem "%1"
 goto :EndOfDirLoop
 
 :GenerateZdsPath
 
-if "%response"=="" (
+if "%response%"=="" goto :FirstZdsPath
-  set response=-usrinc:%1
+set response=%response%;%1
-) else (
+goto :EndOfDirLoop
-  set response=%response%;%1
+
-)
+:FirstZdsPath
+
+if "%pathtype%"=="system" goto :FirstZdsSystemPath
+set response=-usrinc:%1
+goto :EndOfDirLoop
+
+:FirstZdsSystemPath
+
+set response=-stdinc:%1
 
 :EndOfDirLoop
 shift
@@ -120,7 +149,7 @@ goto :DirLoop
 :Usage
 echo %progname% is a tool for flexible generation of include path arguments for a
 echo variety of different compilers in a variety of compilation environments
-echo USAGE: %progname% [-w] [-d] [-h] ^<compiler-path^> ^<dir1^> [^<dir2^> [^<dir3^> ...]]
+echo USAGE: %progname% [-w] [-d] [-s] [-h] ^<compiler-path^> ^<dir1^> [^<dir2^> [^<dir3^> ...]]
 echo Where:
 echo   ^<compiler-path^>
 echo       The full path to your compiler
@@ -128,6 +157,9 @@ echo   ^<dir1^> [^<dir2^> [^<dir3^> ...]]
 echo       A list of include directories
 echo   -w, -d
 echo       For compatibility with incdir.sh (ignored)
+echo   -s
+echo       Generate standard, system header file paths instead of normal user
+echo       header file paths.
 echo   -h
 echo       Shows this help text and exits.
 :End

nuttx/tools/incdir.sh

@@ -36,6 +36,7 @@
 
 progname=$0
 wintool=n
+pathtype=user
 usage="USAGE: $progname [-w] [-d] [-h] <compiler-path> <dir1> [<dir2> [<dir3> ...]]"
 advice="Try '$progname -h' for more information"
 
@@ -47,6 +48,9 @@ while [ ! -z "$1" ]; do
 	-w )
 		wintool=y
 		;;
+	-s )
+		pathtype=system
+		;;
 	-h )
 		echo "$progname is a tool for flexible generation of include path arguments for a"
 		echo "variety of different compilers in a variety of compilation environments"
@@ -61,6 +65,9 @@ while [ ! -z "$1" ]; do
 		echo "	-w"
 		echo "		The compiler is a Windows native tool and requires Windows"
 		echo "		style pathnames like C:\\Program Files"
+		echo "	-s"
+		echo "		Generate standard, system header file paths instead of normal user"
+		echo "		header file paths."
 		echo "	-d"
 		echo "		Enable script debug"
 		echo "	-h"
@@ -158,11 +165,27 @@ exefile=`basename "$compiler"`
 # a special output format as well as special paths
 
 if [ "X$exefile" = "Xez8cc.exe" -o "X$exefile" = "Xzneocc.exe" -o "X$exefile" = "Xez80cc.exe" ]; then
-	fmt=userinc
+	fmt=zds
 else
 	fmt=std
 fi
 
+# Select system or user header file path command line option
+
+if [ "X$fmt" = "Xzds" ]; then
+	if [ "X$pathtype" = "Xsystem" ]; then
+		cmdarg=-stdinc:
+	else
+		cmdarg=-usrinc:
+	fi
+else
+	if [ "X$pathtype" = "Xsystem" ]; then
+		cmdarg=-isystem
+	else
+		cmdarg=-I
+	fi
+fi
+
 # Now process each directory in the directory list
 
 unset response
@@ -186,26 +209,26 @@ for dir in $dirlist; do
 
 	# Handle the output using the selected format
 
-	if [ "X$fmt" = "Xuserinc" ]; then
+	if [ "X$fmt" = "Xzds" ]; then
 		# Treat the first directory differently
 
 		if [ -z "$response" ]; then
-			response="-usrinc:'"$path
+			response="${cmdarg}'"${path}
 		else
-			response=$response":$path"
+			response=${response}":${path}"
 		fi
 	else
 		# Treat the first directory differently
 
 		if [ -z "$response" ]; then
-			response=-I\"$path\"
+			response="${cmdarg} \"$path\""
 		else
-			response=$response" -I\"$path\""
+			response="${response} ${cmdarg} \"$path\""
 		fi
 	fi
 done
 
-if [ "X$fmt" = "Xuserinc" ]; then
+if [ "X$fmt" = "Xzds" ]; then
 	response=$response"'"
 fi