Refactored to work with new battery_status module

2026-10-21 22:03:34 +08:00 · 2019-12-05 16:38:04 +01:00
parent d7bb5d46bb
commit 993fa5bd37
35 changed files with 1101 additions and 1837 deletions
@@ -0,0 +1,50 @@
+__max_num_config_instances: &max_num_config_instances 2
+
+module_name: battery_status
+
+parameters:
+    - group: Battery Calibration
+      definitions:
+        BAT${i}_V_DIV:
+            description:
+                short: Battery ${i} voltage divider (V divider)
+                long: |
+                    This is the divider from battery ${i} voltage to 3.3V ADC voltage.
+                    If using e.g. Mauch power modules the value from the datasheet
+                    can be applied straight here. A value of -1 means to use
+                    the board default.
+
+            type: float
+            decimal: 8
+            reboot_required: true
+            num_instances: *max_num_config_instances
+            instance_start: 1
+            default: [-1.0, -1.0]
+
+        BAT${i}_A_PER_V:
+            description:
+                short: Battery ${i} current per volt (A/V)
+                long: |
+                    The voltage seen by the 3.3V ADC multiplied by this factor
+                    will determine the battery current. A value of -1 means to use
+                    the board default.
+
+            type: float
+            decimal: 8
+            reboot_required: true
+            num_instances: *max_num_config_instances
+            instance_start: 1
+            default: [-1.0, -1.0]
+
+        BAT${i}_ADC_CHANNEL:
+            description:
+                short: Battery ${i} ADC Channel
+                long: |
+                    This parameter specifies the ADC channel used to monitor voltage of main power battery.
+                    A value of -1 means to use the board default.
+
+            type: int32
+            reboot_required: true
+            num_instances: *max_num_config_instances
+            instance_start: 1
+            default: [-1, -1]