fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-17 04:03:33 +08:00
Code Issues Packages Projects Releases Wiki Activity

docs(i18n): PX4 guide translations (Crowdin) - ko (#26849)

Browse Source 
Co-authored-by: Crowdin Bot <support+bot@crowdin.com>
This commit is contained in:
PX4 Build Bot
2026-03-27 13:33:08 +11:00
committed by GitHub
co-authored by Crowdin Bot
parent 274e9e3ee8
commit 9784fcbb8e
56 changed files with 1138 additions and 564 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/ko/modules/modules_driver.md
+3 -50
View File
@@ -191,28 +191,13 @@ Source: [drivers/dshot](https://github.com/PX4/PX4-Autopilot/tree/main/src/drive
### 설명
This is the DShot output driver. It is similar to the fmu driver, and can be used as drop-in replacement
This is the DShot output driver. It can be used as drop-in replacement
to use DShot as ESC communication protocol instead of PWM.
On startup, the module tries to occupy all available pins for DShot output.
It skips all pins already in use (e.g. by a camera trigger module).
It supports:
- DShot150, DShot300, DShot600
- telemetry via separate UART and publishing as esc_status message
- sending DShot commands via CLI
### 예
Permanently reverse motor 1:
```
dshot reverse -m 1
dshot save -m 1
```
After saving, the reversed direction will be regarded as the normal one. So to reverse again repeat the same commands.
### Usage {#dshot_usage}
@@ -226,36 +211,6 @@ dshot <command> [arguments...]
values: <device>
[-x] Swap RX/TX pins
reverse Reverse motor direction
[-m <val>] Motor index (1-based, default=all)
normal Normal motor direction
[-m <val>] Motor index (1-based, default=all)
save Save current settings
[-m <val>] Motor index (1-based, default=all)
3d_on Enable 3D mode
[-m <val>] Motor index (1-based, default=all)
3d_off Disable 3D mode
[-m <val>] Motor index (1-based, default=all)
beep1 Send Beep pattern 1
[-m <val>] Motor index (1-based, default=all)
beep2 Send Beep pattern 2
[-m <val>] Motor index (1-based, default=all)
beep3 Send Beep pattern 3
[-m <val>] Motor index (1-based, default=all)
beep4 Send Beep pattern 4
[-m <val>] Motor index (1-based, default=all)
beep5 Send Beep pattern 5
[-m <val>] Motor index (1-based, default=all)
stop
status print status info
@@ -1109,7 +1064,7 @@ px4io <command> [arguments...]
## rgbled
Source: [drivers/lights/rgbled_ncp5623c](https://github.com/PX4/PX4-Autopilot/tree/main/src/drivers/lights/rgbled_ncp5623c)
Source: [drivers/lights/rgbled](https://github.com/PX4/PX4-Autopilot/tree/main/src/drivers/lights/rgbled)
### Usage {#rgbled_usage}
@@ -1124,9 +1079,7 @@ rgbled <command> [arguments...]
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-a <val>] I2C address
default: 57
[-o <val>] RGB PWM Assignment
default: 123
default: 85
stop