mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-10-28 02:53:34 +08:00
New Crowdin translations - ko (#26551)
Co-authored-by: Crowdin Bot <support+bot@crowdin.com>
This commit is contained in:
co-authored by
Crowdin Bot
parent
30b6938f5e
commit
94c3765712
@@ -30,7 +30,7 @@ This flight controller is [manufacturer supported](../flight_controller/autopilo
|
||||
- [Bosch BMI088](https://www.bosch-sensortec.com/products/motion-sensors/imus/bmi088/) 3-axis accelerometer/gyroscope (internally vibration dampened)
|
||||
- [Invensense ICM-20602](https://invensense.tdk.com/products/motion-tracking/6-axis/icm-20602/) 3-axis accelerometer/gyroscope
|
||||
- [Invensense ICM-20948](https://invensense.tdk.com/products/motion-tracking/9-axis/icm-20948/) 3-axis accelerometer/gyroscope/magnetometer
|
||||
- [Infineon DPS310 barometer](https://www.infineon.com/assets/row/public/documents/24/49/infineon-dps310-datasheet-en.pdf) - [Discontinued](https://www.infineon.com/part/DPS310) (So smooth and NO more light sensitivity)
|
||||
- Infineon DPS310 barometer - [Discontinued](https://www.infineon.com/products/sensor/pressure-sensors/pressure-sensors-for-iot) (So smooth and NO more light sensitivity)
|
||||
|
||||
- 인터페이스:
|
||||
- 6x UART(총 직렬 포트), 3x(HW 흐름 제어 포함), 1x FRSky Telemetry(D 또는 X 유형), 1x 콘솔 및 1x GPS + I2C
|
||||
@@ -56,7 +56,7 @@ This flight controller is [manufacturer supported](../flight_controller/autopilo
|
||||
- 전원시스템
|
||||
- 초저잡음 LDO 전압 조정기 3개
|
||||
|
||||
## 구매처
|
||||
## Where to Buy {#store}
|
||||
|
||||
- [mRo Control Zero](https://store.mrobotics.io/mRo-Control-Zero-F7-p/mro-ctrl-zero-f7.htm)
|
||||
|
||||
@@ -69,22 +69,22 @@ It is pre-built and automatically installed by _QGroundControl_ when appropriate
|
||||
|
||||
To [build PX4](../dev_setup/building_px4.md) for this target:
|
||||
|
||||
```
|
||||
```sh
|
||||
make mro_ctrl-zero-f7
|
||||
```
|
||||
|
||||
## 디버그 포트
|
||||
## Debug Ports {#debug_port}
|
||||
|
||||
### 콘솔 포트
|
||||
|
||||
The [PX4 System Console](../debug/system_console.md) runs on `USART7` using the pins listed below.
|
||||
This is a standard serial pinout, designed to connect to a [3.3V FTDI](https://www.digikey.com/en/products/detail/TTL-232R-3V3/768-1015-ND/1836393) cable (5V tolerant).
|
||||
|
||||
\| mRo control zero f7 | | FTDI |
|
||||
\| ------------------- | ----------- | ---- | ---------------- |
|
||||
\| 17 | USART7 Tx | 5 | FTDI RX (yellow) |
|
||||
\| 19 | USART7 Rx | 4 | FTDI TX (orange) |
|
||||
\| 6 | USART21 GND | 1 | FTDI GND (black) |
|
||||
| mRo control zero f7 | | FTDI | |
|
||||
| ------------------- | ----------- | ---- | ------------------------------- |
|
||||
| 17 | USART7 Tx | 5 | FTDI RX (황) |
|
||||
| 19 | USART7 Rx | 4 | FTDI TX (적황) |
|
||||
| 6 | USART21 GND | 1 | FTDI GND (흑) |
|
||||
|
||||
### SWD 포트
|
||||
|
||||
|
||||
Reference in New Issue
Block a user