fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-11-01 05:51:36 +08:00
Code Issues Packages Projects Releases Wiki Activity

Link fixes and removal of dead docs (#25239)

Browse Source 
* Remove Zubax Orel - not available and no other presence

* Fix up zubax product links

* Snapdragon flight - delete as no longer relevant hardware

* Delete intel aero docs

* Brushless whoop - remove docs except for link to old version

* Many link fixes
This commit is contained in:
Hamish Willee
2025-07-17 15:30:56 +10:00
committed by GitHub
parent 06d25b9400
commit 8e0f223b3a
60 changed files with 151 additions and 299 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/en/camera/fc_connected_camera.md
+1 -1
View File
@@ -117,7 +117,7 @@ The camera trigger driver supports several backends - each for a specific applic
| 1 | Enables the GPIO interface. The AUX outputs are pulsed high or low (depending on the `TRIG_POLARITY` parameter) every [TRIG_INTERVAL](../advanced_config/parameter_reference.md#TRIG_INTERVAL) duration. This can be used to trigger most standard machine vision cameras directly. Note that on PX4FMU series hardware (Pixhawk, Pixracer, etc.), the signal level on the AUX pins is 3.3v. |
| 2 | Enables the Seagull MAP2 interface. This allows the use of the [Seagull MAP2](https://www.seagulluav.com/product/seagull-map2/) to interface to a multitude of supported cameras. Pin/Channel 1 (camera trigger) and Pin/Channel 2 (mode selector) of the MAP2 should be connected to the lower and higher mapped [camera trigger pins](#trigger-output-pin-configuration). Using Seagull MAP2, PX4 also supports automatic power control and keep-alive functionalities of Sony Multiport cameras like the QX-1. |
| 3 | This mode enables MAVLink cameras that used the legacy [MAVLink interface listed above](#mavlink-command-interface). The messages are automatically emitted on the MAVLink `onboard` channel when found in missions. PX4 emits the `CAMERA_TRIGGER` MAVLink message when a camera is triggered, by default to the `onboard` channel (if this is not used, custom stream will need to be enabled). [Simple MAVLink cameras](../camera/mavlink_v1_camera.md) explains this use case in more detail. |
| 4 | Enables the generic PWM interface. This allows the use of [infrared triggers](https://hobbyking.com/en_us/universal-remote-control-infrared-shutter-ir-rc-1g.html) or servos to trigger your camera. |
| 4 | Enables the generic PWM interface. This allows the use of [infrared triggers](https://www.seagulluav.com/product/seagull-ir/) or servos to trigger your camera. |
### Trigger Output Pin Configuration