fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-20 03:23:35 +08:00
Code Issues Packages Projects Releases Wiki Activity

Move PX4 Guide source into /docs (#24490)

Browse Source 
* Add vitepress tree

* Update existing workflows so they dont trigger on changes in the docs path

* Add nojekyll, package.json, LICENCE etc

* Add crowdin docs upload/download scripts

* Add docs flaw checker workflows

* Used docs prefix for docs workflows

* Crowdin obvious fixes

* ci: docs move to self hosted runner

runs on a beefy server for faster builds

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

* ci: don't run build action for docs or ci changes

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

* ci: update runners

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

* Add docs/en

* Add docs assets and scripts

* Fix up editlinks to point to PX4 sources

* Download just the translations that are supported

* Add translation sources for zh, uk, ko

* Update latest tranlsation and uorb graphs

* update vitepress to latest

---------

Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Co-authored-by: Ramon Roche <mrpollo@gmail.com>
This commit is contained in:
Hamish Willee
2025-03-13 16:08:27 +11:00
committed by GitHub
co-authored by Ramon Roche
parent 8e6d2ebe4a
commit 88d623bedb
5176 changed files with 558771 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/zh/frames_autogyro/index.md
+37
View File
@@ -0,0 +1,37 @@
# Autogyro Frames
<LinkedBadge type="warning" text="Experimental" url="../airframes/#experimental-vehicles"/>
:::warning
Support for autogyro frames is [experimental](../airframes/index.md#experimental-vehicles).
Maintainer volunteers, [contribution](../contribute/index.md) of new features, new frame configurations, or other improvements would all be very welcome!
:::
An [Autogyro](https://en.wikipedia.org/wiki/Autogyro) is a type of [rotary-wing](https://en.wikipedia.org/wiki/Rotorcraft).
Compared to other designs it possesses following advantages:
- Ability to take off and land using only a very short runway (compared to an fixed-wing vehicle).
- High resistance to weather conditions, especially gusts of wind.
- Possession of a non-powered rotor enabling it to operate in an autorotation mode (one of the helicopter’s emergency modes as well).
Consequently, it does not need to actively change a flight mode in case of failure (it does not need a parachute or other actively working devices).
Its flight is thus inherently stable at all times.
- Absence of a [downwash](https://en.wikipedia.org/wiki/Downwash) during take-off or landing creating an unwanted swirling of dust.
- [Low lift-to-drag ratio](https://en.wikipedia.org/wiki/Lift-to-drag_ratio) that can be adjusted by construction parameters.
This ability can be useful because while an unmanned autogyro cannot fly very far in the case of failure (as is the case of a conventional airplane), the flight is still safe and aircraft does not fall (as is typical for multicopter or helicopter).
## Supported Frames
PX4 supports several autogyro airframes.
The set of supported configurations can be seen in [Airframes Reference > Autogyro](../airframes/airframe_reference.md#autogyro).
### DIY Frames
This section contains build logs/instructions for assembling and configuring a number of Autogyro frames.
- [ThunderFly Auto-G2 (Holybro pix32)](../frames_autogyro/thunderfly_auto_g2.md)
### Complete Frames with PX4 Preinstalled
This section lists vehicles that are sold fully assembled and ready to fly (RTF), with PX4 installed.
- [ThunderFly TF-G2](https://www.thunderfly.cz/tf-g2.html)
docs/zh/frames_autogyro/thunderfly_auto_g2.md
+156
View File
@@ -0,0 +1,156 @@
# ThunderFly Auto-G2 Autogyro
The _ThunderFly Auto-G2_ is an autopilot-controlled autogyro based on the&#x20;
Durafly™ Auto-G2 Gyrocopter RC model, with several parts of the original model substituted for 3D printable ones.
![Auto-G2](../../assets/airframes/autogyro/auto-g2/autog2_title.jpg)
:::info
Auto-G2 autogyro’s airframe is developed and maintained by ThuderFly s.r.o. company.
:::
All the added parts are available on [GitHub](https://github.com/ThunderFly-aerospace/TF-G2/) as an open-source project.
Printed parts are designed in [OpenSCAD](https://www.openscad.org/).
## Modifications
Durafly Auto-G2, in its original design, has a three-blade rotor with 400 mm long blades with a CLARK-Y profile.
Rotor head allows tilting in the ROLL axis only.
Autogyro is controlled by a rudder and an elevator.
Durafly Auto-G2 autogyro box contains the autogyro polystyrene body, ESC, motor (probably 800kV), 4 servos, tail airfoils, 3 blades with rotor center parts, wire chassis and a prerotator.
Modification of the Durafly model are as follows:
- Addition of an autopilot
- Rotor head with two axes of freedom (pitch, roll)
- Two blade rotor with safely breakable rotor plate
- Larger landing gears
### 飞控
The aircraft with all of the modifications is already quite heavy.
Therefore a low-weight flight controller is recommended (e.g. [Holybro pix32](../flight_controller/holybro_pix32.md) or [CUAV nano](../flight_controller/cuav_v5_nano.md)).
The autopilot should be mounted on the bottom side of the autogyro on a 3D printed damping pad.
We have used the damping platform found on [thingiverse](https://www.thingiverse.com/thing:160655)
### Rotor-head
The rotor head is (compared to the original autogyro) modified so it allows a motion in both roll and pitch axes.
Thanks to this, the rotor can control turning as well climbing of the autogyro.
Directional control of autogyro by rotor is possible even in case of low airspeed compared to the original rudder and elevator control.
The printed rotor head consists of three parts.
The bottom part is screwed using an M2.5 screw to the original plywood pylon.
An M3x35 screw found between the first and the second part creates the pitch axis freedom and the connection between the second and the third part the roll axis freedom.
The latter axis is made of an M3x30 screw with a screwed self-locking nut.
From the rotor side, the screw head has a large area washer.
Rotor axis, made of M3x50 high tensile strength screw, goes through the third part.
Bearings used are 623 2Z C3 SKF.
At the end of this part, there are ball rods attached via M2.5 screws to servos positioned in the bottom part of the pylon.
It is preferable to exchange these original servos for better quality ones as they are weak and in the original construction they help each other.
![Rotorhead](../../assets/airframes/autogyro/auto-g2/modif_rh.png)
### Two-blade rotor
The original Durafly Auto-G2 autogyro has a three-blade rotor, which as been modified in this built to use a two-blade rotor.
The reasons are reduced vibration and easier construction.
Printed central parts are designed to be used both with Chinese Durafly blades or 3D printed blades.
The rotor's central part consists of several components which have following roles:
- They enable blade flapping.
- They have deformation zones that break upon impact with ground.
Thanks to this, the rotor can usually be repaired quickly by replacing only one component.
- Easy setup of blades angle-of-attack.
#### HobbyKing rotor blades
It is possible to use a printed central part of the rotor with the original blades.
These blades can be bought on [HobbyKing](https://hobbyking.com/en_us/duraflytm-auto-g-gyrocopter-821mm-replacement-main-blade-1pcs-bag.html).
Hobbyking blades differ in the position of center of gravity and it is therefore necessary to balance them properly.
#### 3D printed rotor blades
It is also possible to print rotor blades.
The printed rotor blads are still under development, but preliminary tests show they are of better quality mostly thanks to their precise shape and absence of longitudinal grooves.
However, some of the production processes still need to be tuned.
![Blades assembly](../../assets/airframes/autogyro/auto-g2/modif_blade.png)
#### Balancing
Proper blades balance is very important to minimize vibrations.
Blades have to be balanced in such a way, that the center of gravity is located in the middle of the rotor axis.
Printed blades are balanced in the production process and there is no need to further balance them.
### Release device
If you want to launch an autogyro using a winch or if you want to launch it by towing you need to print a release device.
It is a small box equipped with servo which pulls out the pin and releases the rope.
The whole part is glued, using a hot-melt adhesive, under the engine on the bottom part of an autogyro’s body.
If an autogyro is towed by a rope its engine must not be turned on.
It can be handled, for example, by nulling the engine’s output in the transmitter if the release device switch is closed.
![Release device](../../assets/airframes/autogyro/auto-g2/modif_release.png)
## 配件列表
### Electronic
- Autopilot ([Holybro pix32](../flight_controller/holybro_pix32.md), [CUAV nano](../flight_controller/cuav_v5_nano.md))
- GPS (GPS Module NEO-6M, with patch antenna)
- Airspeed sensor ([SDP3x](https://www.sensirion.com/en/flow-sensors/differential-pressure-sensors/worlds-smallest-differential-pressure-sensor/))
- Stronger servos as a substitution for the original ones (optional), ([BlueBird BMS-125WV](https://www.blue-bird-model.com/products_detail/411.htm))
- Additional servo for release device (optional)
### Mechanical parts
- Rotor head Bearing (623 2Z C3)
- Propeller ([APC 10x7](https://www.apcprop.com/product/10x7e/))
- [Prop adapter](https://mpjet.com/shop/gb/prop-adapters/184-collet-prop-adapter-19-mm-4-mm-shaft-m629-standard.html)
### Printable parts
- Rotor head:
- [Pylon end](https://github.com/ThunderFly-aerospace/Auto-G2/blob/master/CAD/stl/111_1001.stl)
- [Pitch part](https://github.com/ThunderFly-aerospace/Auto-G2/blob/master/CAD/stl/111_1002.stl)
- [Roll part](https://github.com/ThunderFly-aerospace/Auto-G2/blob/master/CAD/stl/111_1003.stl)
- Rotor:
- [center part washer top](https://github.com/ThunderFly-aerospace/Auto-G2/blob/master/CAD/stl/111_1008.stl)
- [center part washer bottom](https://github.com/ThunderFly-aerospace/Auto-G2/blob/master/CAD/stl/111_1004.stl)
- [center plate with deformation zones](https://github.com/ThunderFly-aerospace/Auto-G2/blob/master/CAD/stl/888_1001.stl)
- [washers for setting AoA of blades](https://github.com/ThunderFly-aerospace/Auto-G2/blob/master/CAD/stl/111_1005.stl)
- [Rotor nut](https://github.com/ThunderFly-aerospace/Auto-G2/blob/master/CAD/stl/888_1002.stl)
- Rotor blades (optional)
- Autopilot holder
- [Release device](https://github.com/ThunderFly-aerospace/Auto-G2/blob/master/CAD/stl/888_1010.stl)
- [Front wheels](https://github.com/ThunderFly-aerospace/Auto-G2/blob/master/CAD/stl/888_1011.stl)
### Recommended spare parts
- Servos with improved quality (recommended [BlueBird BMS-125WV](https://www.blue-bird-model.com/products_detail/411.htm), original servos are not very durable))
- Propeller ([APC 10x7](https://www.apcprop.com/product/10x7e/))
- Rotor centre plate with deformation zones (3D printed)
- Rotor blades ([HobbyKing](https://hobbyking.com/en_us/duraflytm-auto-g-gyrocopter-821mm-replacement-main-blade-1pcs-bag.html) or 3D printed)
## 视频
<lite-youtube videoid="YhXXSWz5wWs" title="[ThunderFly] 3D printed autogyro rotor"/>
## Photo gallery of changes
![Auto-G2 1](../../assets/airframes/autogyro/auto-g2/autog2_1.jpg)
![Auto-G2 2](../../assets/airframes/autogyro/auto-g2/autog2_2.jpg)
![Auto-G2 3](../../assets/airframes/autogyro/auto-g2/autog2_3.jpg)
![Auto-G2 4](../../assets/airframes/autogyro/auto-g2/autog2_4.jpg)