more spelling mistakes

src/modules/attitude_estimator_ekf/AttitudeEKF.m

@@ -2,7 +2,7 @@ function [xa_apo,Pa_apo,Rot_matrix,eulerAngles,debugOutput]...
     = AttitudeEKF(approx_prediction,use_inertia_matrix,zFlag,dt,z,q_rotSpeed,q_rotAcc,q_acc,q_mag,r_gyro,r_accel,r_mag,J)
 
 
-%LQG Postion Estimator and Controller
+%LQG Position Estimator and Controller
 % Observer:
 %        x[n|n]   = x[n|n-1] + M(y[n] - Cx[n|n-1] - Du[n])
 %        x[n+1|n] = Ax[n|n] + Bu[n]

src/modules/attitude_estimator_ekf/codegen/AttitudeEKF.c

@@ -499,7 +499,7 @@ void AttitudeEKF(unsigned char approx_prediction, unsigned char
 
   float b_z[6];
 
-  /* LQG Postion Estimator and Controller */
+  /* LQG Position Estimator and Controller */
   /*  Observer: */
   /*         x[n|n]   = x[n|n-1] + M(y[n] - Cx[n|n-1] - Du[n]) */
   /*         x[n+1|n] = Ax[n|n] + Bu[n] */

src/modules/commander/commander_tests/state_machine_helper_test.cpp

@@ -75,11 +75,11 @@ bool StateMachineHelperTest::armingStateTransitionTest(void)
     } ArmingTransitionVolatileState_t;
 
     // This structure represents a test case for arming_state_transition. It contains the machine
-    // state prior to transtion, the requested state to transition to and finally the expected
+    // state prior to transition, the requested state to transition to and finally the expected
     // machine state after transition.
     typedef struct {
         const char*                     assertMsg;                              // Text to show when test case fails
-        ArmingTransitionVolatileState_t current_state;                          // Machine state prior to transtion
+        ArmingTransitionVolatileState_t current_state;                          // Machine state prior to transition
         hil_state_t                     hil_state;                              // Current vehicle_status_s.hil_state
         bool                            condition_system_sensors_initialized;   // Current vehicle_status_s.condition_system_sensors_initialized
         bool                            safety_switch_available;                // Current safety_s.safety_switch_available

src/modules/local_position_estimator/BlockLocalPositionEstimator.hpp

@@ -145,7 +145,7 @@ private:
 	// predict the next state
 	void predict();
 
-	// correct the state prediction wtih a measurement
+	// correct the state prediction with a measurement
 	void correctBaro();
 	void correctGps();
 	void correctLidar();

src/modules/muorb/adsp/uORBFastRpcChannel.cpp

@@ -35,7 +35,7 @@
 #include <algorithm>
 #include <drivers/drv_hrt.h>
 
-// static intialization.
+// static initialization.
 uORB::FastRpcChannel uORB::FastRpcChannel::_Instance;
 
 static unsigned long _dropped_pkts;

src/modules/muorb/krait/uORBKraitFastRpcChannel.cpp

@@ -44,7 +44,7 @@ uORB::KraitFastRpcChannel uORB::KraitFastRpcChannel::_Instance;
 
 static void DumpData(uint8_t *buffer, int32_t length, int32_t num_topics);
 
-// static intialization.
+// static initialization.
 static std::string _log_file_name = "./hex_dump.txt";
 
 static unsigned long _snd_msg_min = 0xFFFFFF;

src/modules/systemlib/mixer/mixer.h

@@ -481,7 +481,7 @@ public:
 	 *				compared to thrust.
 	 * @param yaw_wcale		Scaling factor applied to yaw inputs compared
 	 *				to thrust.
-	 * @param idle_speed		Minumum rotor control output value; usually
+	 * @param idle_speed		Minimum rotor control output value; usually
 	 *				tuned to ensure that rotors never stall at the
 	 * 				low end of their control range.
 	 */

src/modules/systemlib/up_cxxinitialize.c

@@ -118,7 +118,7 @@ extern uint32_t _etext;
  *   This function should then be called in the application-specific
  *   user_start logic in order to perform the C++ initialization.  NOTE
  *   that no component of the core NuttX RTOS logic is involved; This
- *   function defintion only provides the 'contract' between application
+ *   function definition only provides the 'contract' between application
  *   specific C++ code and platform-specific toolchain support
  *
  ***************************************************************************/

src/modules/systemlib/uthash/doc/userguide.txt

@@ -1058,7 +1058,7 @@ always used with the `users_by_name` hash table).
 
 Several sort orders
 ~~~~~~~~~~~~~~~~~~~
-It comes as no suprise that two hash tables can have different sort orders, but
+It comes as no surprise that two hash tables can have different sort orders, but
 this fact can also be used advantageously to sort the 'same items' in several
 ways. This is based on the ability to store a structure in several hash tables.