fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-19 11:33:35 +08:00
Code Issues Packages Projects Releases Wiki Activity

Merged origin/master into pubsub_cleanup

Browse Source
This commit is contained in:
Lorenz Meier
2014-02-09 16:04:32 +01:00
parent ac326beaaa f52f15c791
commit 773f70a9df
147 changed files with 5405 additions and 4220 deletions
Download Patch File Download Diff File Expand all files Collapse all files
src/drivers/airspeed/airspeed.cpp
+1 -1
View File
@@ -92,7 +92,7 @@ Airspeed::Airspeed(int bus, int address, unsigned conversion_interval) :
_comms_errors(perf_alloc(PC_COUNT, "airspeed_comms_errors"))
{
// enable debug() calls
_debug_enabled = true;
_debug_enabled = false;
// work_cancel in the dtor will explode if we don't do this...
memset(&_work, 0, sizeof(_work));
src/drivers/boards/px4fmu-v2/board_config.h
+3 -3
View File
@@ -75,7 +75,7 @@ __BEGIN_DECLS
/* PX4FMU GPIOs ***********************************************************************************/
/* LEDs */
#define GPIO_LED1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN12)
#define GPIO_LED1 (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN12)
/* External interrupts */
#define GPIO_EXTI_GYRO_DRDY (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTB|GPIO_PIN0)
@@ -87,7 +87,7 @@ __BEGIN_DECLS
#define GPIO_GYRO_DRDY_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTB|GPIO_PIN0)
#define GPIO_MAG_DRDY_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTB|GPIO_PIN1)
#define GPIO_ACCEL_DRDY_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTB|GPIO_PIN4)
#define GPIO_EXTI_MPU_DRDY (GPIO_INPUT|GPIO_PULLDOWN|GPIO_EXTI|GPIO_PORTD|GPIO_PIN15)
#define GPIO_EXTI_MPU_DRDY_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_EXTI|GPIO_PORTD|GPIO_PIN15)
/* SPI1 off */
#define GPIO_SPI1_SCK_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTA|GPIO_PIN5)
@@ -98,7 +98,7 @@ __BEGIN_DECLS
#define GPIO_SPI_CS_GYRO_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTC|GPIO_PIN13)
#define GPIO_SPI_CS_ACCEL_MAG_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTC|GPIO_PIN15)
#define GPIO_SPI_CS_BARO_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTD|GPIO_PIN7)
#define GPIO_SPI_CS_MPU (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTC|GPIO_PIN2)
#define GPIO_SPI_CS_MPU_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTC|GPIO_PIN2)
/* SPI chip selects */
#define GPIO_SPI_CS_GYRO (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN13)
src/drivers/boards/px4io-v1/board_config.h
+3 -3
View File
@@ -58,11 +58,11 @@
/* PX4IO GPIOs **********************************************************************/
/* LEDs */
#define GPIO_LED1 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
#define GPIO_LED1 (GPIO_OUTPUT|GPIO_CNF_OUTOD|GPIO_MODE_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN14)
#define GPIO_LED2 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
#define GPIO_LED2 (GPIO_OUTPUT|GPIO_CNF_OUTOD|GPIO_MODE_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN15)
#define GPIO_LED3 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
#define GPIO_LED3 (GPIO_OUTPUT|GPIO_CNF_OUTOD|GPIO_MODE_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN10)
/* Safety switch button *************************************************************/
src/drivers/boards/px4io-v2/board_config.h
+4 -4
View File
@@ -74,9 +74,9 @@
/* LEDS **********************************************************************/
#define GPIO_LED1 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN14)
#define GPIO_LED2 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN15)
#define GPIO_LED3 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN13)
#define GPIO_LED1 (GPIO_OUTPUT|GPIO_CNF_OUTOD|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN14)
#define GPIO_LED2 (GPIO_OUTPUT|GPIO_CNF_OUTOD|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN15)
#define GPIO_LED3 (GPIO_OUTPUT|GPIO_CNF_OUTOD|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN13)
/* Safety switch button *******************************************************/
@@ -114,7 +114,7 @@
/* XXX these should be UART pins */
#define GPIO_SBUS_INPUT (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|GPIO_PORTB|GPIO_PIN11)
#define GPIO_SBUS_OUTPUT (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN10)
#define GPIO_SBUS_OENABLE (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN4)
#define GPIO_SBUS_OENABLE (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN4)
/*
* High-resolution timer
src/drivers/boards/px4io-v2/px4iov2_init.c
-2
View File
@@ -124,8 +124,6 @@ __EXPORT void stm32_boardinitialize(void)
stm32_configgpio(GPIO_ADC_VSERVO);
stm32_configgpio(GPIO_SBUS_INPUT); /* xxx alternate function */
stm32_gpiowrite(GPIO_SBUS_OUTPUT, false);
stm32_configgpio(GPIO_SBUS_OUTPUT);
/* sbus output enable is active low - disable it by default */
src/drivers/drv_pwm_output.h
+18
View File
@@ -189,6 +189,24 @@ ORB_DECLARE(output_pwm);
/** get the maximum PWM value the output will send */
#define PWM_SERVO_GET_MAX_PWM _IOC(_PWM_SERVO_BASE, 19)
/** set the number of servos in (unsigned)arg - allows change of
* split between servos and GPIO */
#define PWM_SERVO_SET_COUNT _IOC(_PWM_SERVO_BASE, 20)
/** set the lockdown override flag to enable outputs in HIL */
#define PWM_SERVO_SET_DISABLE_LOCKDOWN _IOC(_PWM_SERVO_BASE, 21)
/** get the lockdown override flag to enable outputs in HIL */
#define PWM_SERVO_GET_DISABLE_LOCKDOWN _IOC(_PWM_SERVO_BASE, 22)
/*
*
*
* WARNING WARNING WARNING! DO NOT EXCEED 31 IN IOC INDICES HERE!
*
*
*/
/** set a single servo to a specific value */
#define PWM_SERVO_SET(_servo) _IOC(_PWM_SERVO_BASE, 0x20 + _servo)
src/drivers/drv_rc_input.h
+50 -4
View File
@@ -1,6 +1,6 @@
/****************************************************************************
*
* Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved.
* Copyright (c) 2012-2014 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@@ -62,6 +62,11 @@
*/
#define RC_INPUT_MAX_CHANNELS 18
/**
* Maximum RSSI value
*/
#define RC_INPUT_RSSI_MAX 255
/**
* Input signal type, value is a control position from zero to 100
* percent.
@@ -83,8 +88,11 @@ enum RC_INPUT_SOURCE {
* on the board involved.
*/
struct rc_input_values {
/** decoding time */
uint64_t timestamp;
/** publication time */
uint64_t timestamp_publication;
/** last valid reception time */
uint64_t timestamp_last_signal;
/** number of channels actually being seen */
uint32_t channel_count;
@@ -92,6 +100,40 @@ struct rc_input_values {
/** receive signal strength indicator (RSSI): < 0: Undefined, 0: no signal, 255: full reception */
int32_t rssi;
/**
* explicit failsafe flag: true on TX failure or TX out of range , false otherwise.
* Only the true state is reliable, as there are some (PPM) receivers on the market going
* into failsafe without telling us explicitly.
* */
bool rc_failsafe;
/**
* RC receiver connection status: True,if no frame has arrived in the expected time, false otherwise.
* True usally means that the receiver has been disconnected, but can also indicate a radio link loss on "stupid" systems.
* Will remain false, if a RX with failsafe option continues to transmit frames after a link loss.
* */
bool rc_lost;
/**
* Number of lost RC frames.
* Note: intended purpose: observe the radio link quality if RSSI is not available
* This value must not be used to trigger any failsafe-alike funtionality.
* */
uint16_t rc_lost_frame_count;
/**
* Number of total RC frames.
* Note: intended purpose: observe the radio link quality if RSSI is not available
* This value must not be used to trigger any failsafe-alike funtionality.
* */
uint16_t rc_total_frame_count;
/**
* Length of a single PPM frame.
* Zero for non-PPM systems
*/
uint16_t rc_ppm_frame_length;
/** Input source */
enum RC_INPUT_SOURCE input_source;
@@ -107,8 +149,12 @@ ORB_DECLARE(input_rc);
#define _RC_INPUT_BASE 0x2b00
/** Fetch R/C input values into (rc_input_values *)arg */
#define RC_INPUT_GET _IOC(_RC_INPUT_BASE, 0)
/** Enable RSSI input via ADC */
#define RC_INPUT_ENABLE_RSSI_ANALOG _IOC(_RC_INPUT_BASE, 1)
/** Enable RSSI input via PWM signal */
#define RC_INPUT_ENABLE_RSSI_PWM _IOC(_RC_INPUT_BASE, 2)
#endif /* _DRV_RC_INPUT_H */
src/drivers/drv_sbus.h
+58
View File
@@ -0,0 +1,58 @@
/****************************************************************************
*
* Copyright (c) 2014 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file drv_sbus.h
*
* Futaba S.BUS / S.BUS 2 compatible interface.
*/
#ifndef _DRV_SBUS_H
#define _DRV_SBUS_H
#include <stdint.h>
#include <sys/ioctl.h>
#include "drv_orb_dev.h"
/**
* Path for the default S.BUS device
*/
#define SBUS_DEVICE_PATH "/dev/sbus"
#define _SBUS_BASE 0x2c00
/** Enable S.BUS version 1 / 2 output (0 to disable) */
#define SBUS_SET_PROTO_VERSION _IOC(_SBUS_BASE, 0)
#endif /* _DRV_SBUS_H */
src/drivers/hmc5883/hmc5883.cpp
+87 -74
View File
@@ -839,42 +839,24 @@ HMC5883::collect()
/* scale values for output */
/*
* 1) Scale raw value to SI units using scaling from datasheet.
* 2) Subtract static offset (in SI units)
* 3) Scale the statically calibrated values with a linear
* dynamically obtained factor
*
* Note: the static sensor offset is the number the sensor outputs
* at a nominally 'zero' input. Therefore the offset has to
* be subtracted.
*
* Example: A gyro outputs a value of 74 at zero angular rate
* the offset is 74 from the origin and subtracting
* 74 from all measurements centers them around zero.
*/
#ifdef PX4_I2C_BUS_ONBOARD
if (_bus == PX4_I2C_BUS_ONBOARD) {
/* to align the sensor axes with the board, x and y need to be flipped */
new_report.x = ((report.y * _range_scale) - _scale.x_offset) * _scale.x_scale;
/* flip axes and negate value for y */
new_report.y = ((-report.x * _range_scale) - _scale.y_offset) * _scale.y_scale;
/* z remains z */
new_report.z = ((report.z * _range_scale) - _scale.z_offset) * _scale.z_scale;
} else {
#endif
/* the standard external mag by 3DR has x pointing to the right, y pointing backwards, and z down,
* therefore switch x and y and invert y */
new_report.x = ((-report.y * _range_scale) - _scale.x_offset) * _scale.x_scale;
/* flip axes and negate value for y */
new_report.y = ((report.x * _range_scale) - _scale.y_offset) * _scale.y_scale;
/* z remains z */
new_report.z = ((report.z * _range_scale) - _scale.z_offset) * _scale.z_scale;
#ifdef PX4_I2C_BUS_ONBOARD
}
// convert onboard so it matches offboard for the
// scaling below
report.y = -report.y;
report.x = -report.x;
}
#endif
/* the standard external mag by 3DR has x pointing to the
* right, y pointing backwards, and z down, therefore switch x
* and y and invert y */
new_report.x = ((-report.y * _range_scale) - _scale.x_offset) * _scale.x_scale;
/* flip axes and negate value for y */
new_report.y = ((report.x * _range_scale) - _scale.y_offset) * _scale.y_scale;
/* z remains z */
new_report.z = ((report.z * _range_scale) - _scale.z_offset) * _scale.z_scale;
if (_class_instance == CLASS_DEVICE_PRIMARY && !(_pub_blocked)) {
if (_mag_topic != -1) {
@@ -886,7 +868,6 @@ HMC5883::collect()
if (_mag_topic < 0)
debug("failed to create sensor_mag publication");
}
}
/* post a report to the ring */
@@ -909,6 +890,7 @@ int HMC5883::calibrate(struct file *filp, unsigned enable)
struct mag_report report;
ssize_t sz;
int ret = 1;
uint8_t good_count = 0;
// XXX do something smarter here
int fd = (int)enable;
@@ -931,32 +913,17 @@ int HMC5883::calibrate(struct file *filp, unsigned enable)
1.0f,
};
float avg_excited[3] = {0.0f, 0.0f, 0.0f};
unsigned i;
float sum_excited[3] = {0.0f, 0.0f, 0.0f};
/* expected axis scaling. The datasheet says that 766 will
* be places in the X and Y axes and 713 in the Z
* axis. Experiments show that in fact 766 is placed in X,
* and 713 in Y and Z. This is relative to a base of 660
* LSM/Ga, giving 1.16 and 1.08 */
float expected_cal[3] = { 1.16f, 1.08f, 1.08f };
warnx("starting mag scale calibration");
/* do a simple demand read */
sz = read(filp, (char *)&report, sizeof(report));
if (sz != sizeof(report)) {
warn("immediate read failed");
ret = 1;
goto out;
}
warnx("current measurement: %.6f %.6f %.6f", (double)report.x, (double)report.y, (double)report.z);
warnx("time: %lld", report.timestamp);
warnx("sampling 500 samples for scaling offset");
/* set the queue depth to 10 */
/* don't do this for now, it can lead to a crash in start() respectively work_queue() */
// if (OK != ioctl(filp, SENSORIOCSQUEUEDEPTH, 10)) {
// warn("failed to set queue depth");
// ret = 1;
// goto out;
// }
/* start the sensor polling at 50 Hz */
if (OK != ioctl(filp, SENSORIOCSPOLLRATE, 50)) {
warn("failed to set 2Hz poll rate");
@@ -964,8 +931,9 @@ int HMC5883::calibrate(struct file *filp, unsigned enable)
goto out;
}
/* Set to 2.5 Gauss */
if (OK != ioctl(filp, MAGIOCSRANGE, 2)) {
/* Set to 2.5 Gauss. We ask for 3 to get the right part of
* the chained if statement above. */
if (OK != ioctl(filp, MAGIOCSRANGE, 3)) {
warnx("failed to set 2.5 Ga range");
ret = 1;
goto out;
@@ -989,8 +957,8 @@ int HMC5883::calibrate(struct file *filp, unsigned enable)
goto out;
}
/* read the sensor 10x and report each value */
for (i = 0; i < 500; i++) {
// discard 10 samples to let the sensor settle
for (uint8_t i = 0; i < 10; i++) {
struct pollfd fds;
/* wait for data to be ready */
@@ -1008,32 +976,69 @@ int HMC5883::calibrate(struct file *filp, unsigned enable)
if (sz != sizeof(report)) {
warn("periodic read failed");
ret = -EIO;
goto out;
}
}
} else {
avg_excited[0] += report.x;
avg_excited[1] += report.y;
avg_excited[2] += report.z;
/* read the sensor up to 50x, stopping when we have 10 good values */
for (uint8_t i = 0; i < 50 && good_count < 10; i++) {
struct pollfd fds;
/* wait for data to be ready */
fds.fd = fd;
fds.events = POLLIN;
ret = ::poll(&fds, 1, 2000);
if (ret != 1) {
warn("timed out waiting for sensor data");
goto out;
}
/* now go get it */
sz = ::read(fd, &report, sizeof(report));
if (sz != sizeof(report)) {
warn("periodic read failed");
ret = -EIO;
goto out;
}
float cal[3] = {fabsf(expected_cal[0] / report.x),
fabsf(expected_cal[1] / report.y),
fabsf(expected_cal[2] / report.z)};
if (cal[0] > 0.7f && cal[0] < 1.35f &&
cal[1] > 0.7f && cal[1] < 1.35f &&
cal[2] > 0.7f && cal[2] < 1.35f) {
good_count++;
sum_excited[0] += cal[0];
sum_excited[1] += cal[1];
sum_excited[2] += cal[2];
}
//warnx("periodic read %u", i);
//warnx("measurement: %.6f %.6f %.6f", (double)report.x, (double)report.y, (double)report.z);
//warnx("cal: %.6f %.6f %.6f", (double)cal[0], (double)cal[1], (double)cal[2]);
}
avg_excited[0] /= i;
avg_excited[1] /= i;
avg_excited[2] /= i;
if (good_count < 5) {
warn("failed calibration");
ret = -EIO;
goto out;
}
warnx("done. Performed %u reads", i);
warnx("measurement avg: %.6f %.6f %.6f", (double)avg_excited[0], (double)avg_excited[1], (double)avg_excited[2]);
#if 0
warnx("measurement avg: %.6f %.6f %.6f",
(double)sum_excited[0]/good_count,
(double)sum_excited[1]/good_count,
(double)sum_excited[2]/good_count);
#endif
float scaling[3];
/* calculate axis scaling */
scaling[0] = fabsf(1.16f / avg_excited[0]);
/* second axis inverted */
scaling[1] = fabsf(1.16f / -avg_excited[1]);
scaling[2] = fabsf(1.08f / avg_excited[2]);
scaling[0] = sum_excited[0] / good_count;
scaling[1] = sum_excited[1] / good_count;
scaling[2] = sum_excited[2] / good_count;
warnx("axes scaling: %.6f %.6f %.6f", (double)scaling[0], (double)scaling[1], (double)scaling[2]);
@@ -1166,6 +1171,8 @@ int HMC5883::set_excitement(unsigned enable)
conf_reg &= ~0x03;
}
// ::printf("set_excitement enable=%d regA=0x%x\n", (int)enable, (unsigned)conf_reg);
ret = write_reg(ADDR_CONF_A, conf_reg);
if (OK != ret)
@@ -1174,6 +1181,8 @@ int HMC5883::set_excitement(unsigned enable)
uint8_t conf_reg_ret;
read_reg(ADDR_CONF_A, conf_reg_ret);
//print_info();
return !(conf_reg == conf_reg_ret);
}
@@ -1212,6 +1221,10 @@ HMC5883::print_info()
perf_print_counter(_comms_errors);
perf_print_counter(_buffer_overflows);
printf("poll interval: %u ticks\n", _measure_ticks);
printf("offsets (%.2f %.2f %.2f)\n", (double)_scale.x_offset, (double)_scale.y_offset, (double)_scale.z_offset);
printf("scaling (%.2f %.2f %.2f) 1/range_scale %.2f range_ga %.2f\n",
(double)_scale.x_scale, (double)_scale.y_scale, (double)_scale.z_scale,
(double)1.0/_range_scale, (double)_range_ga);
_reports->print_info("report queue");
}
src/drivers/meas_airspeed/meas_airspeed.cpp
+7 -15
View File
@@ -77,7 +77,6 @@
#include <systemlib/err.h>
#include <systemlib/param/param.h>
#include <systemlib/perf_counter.h>
#include <mathlib/mathlib.h>
#include <drivers/drv_airspeed.h>
#include <drivers/drv_hrt.h>
@@ -178,24 +177,17 @@ MEASAirspeed::collect()
return ret;
}
//uint16_t diff_pres_pa = (val[1]) | ((val[0] & ~(0xC0)) << 8);
uint16_t temp = (val[3] & 0xE0) << 8 | val[2];
// XXX leaving this in until new calculation method has been cross-checked
//diff_pres_pa = abs(diff_pres_pa - (16384 / 2.0f));
//diff_pres_pa -= _diff_pres_offset;
int16_t dp_raw = 0, dT_raw = 0;
dp_raw = (val[0] << 8) + val[1];
dp_raw = 0x3FFF & dp_raw; //mask the used bits
/* mask the used bits */
dp_raw = 0x3FFF & dp_raw;
dT_raw = (val[2] << 8) + val[3];
dT_raw = (0xFFE0 & dT_raw) >> 5;
float temperature = ((200 * dT_raw) / 2047) - 50;
// XXX we may want to smooth out the readings to remove noise.
// Calculate differential pressure. As its centered around 8000
// and can go positive or negative, enforce absolute value
// uint16_t diff_press_pa = abs(dp_raw - (16384 / 2.0f));
/* calculate differential pressure. As its centered around 8000
* and can go positive or negative, enforce absolute value
*/
const float P_min = -1.0f;
const float P_max = 1.0f;
float diff_press_pa = fabsf( ( ((float)dp_raw - 0.1f*16383.0f) * (P_max-P_min)/(0.8f*16383.0f) + P_min) * 6894.8f) - _diff_pres_offset;
@@ -204,7 +196,7 @@ MEASAirspeed::collect()
struct differential_pressure_s report;
// Track maximum differential pressure measured (so we can work out top speed).
/* track maximum differential pressure measured (so we can work out top speed). */
if (diff_press_pa > _max_differential_pressure_pa) {
_max_differential_pressure_pa = diff_press_pa;
}
@@ -394,7 +386,7 @@ test()
err(1, "immediate read failed");
warnx("single read");
warnx("diff pressure: %d pa", report.differential_pressure_pa);
warnx("diff pressure: %d pa", (double)report.differential_pressure_pa);
/* start the sensor polling at 2Hz */
if (OK != ioctl(fd, SENSORIOCSPOLLRATE, 2))
src/drivers/mkblctrl/mkblctrl.cpp
+94 -364
View File
@@ -1,6 +1,6 @@
/****************************************************************************
*
* Copyright (C) 2012,2013 PX4 Development Team. All rights reserved.
* Copyright (C) 2012-2014 PX4 Development Team. All rights reserved.
* Author: Marco Bauer <marco@wtns.de>
*
* Redistribution and use in source and binary forms, with or without
@@ -65,7 +65,6 @@
#include <drivers/device/device.h>
#include <drivers/drv_pwm_output.h>
#include <drivers/drv_gpio.h>
#include <drivers/drv_hrt.h>
#include <drivers/drv_rc_input.h>
@@ -93,16 +92,12 @@
#define MOTOR_SPINUP_COUNTER 30
#define ESC_UORB_PUBLISH_DELAY 500000
class MK : public device::I2C
{
public:
enum Mode {
MODE_NONE,
MODE_2PWM,
MODE_4PWM,
MODE_6PWM,
};
enum MappingMode {
MAPPING_MK = 0,
MAPPING_PX4,
@@ -120,8 +115,7 @@ public:
virtual int init(unsigned motors);
virtual ssize_t write(file *filp, const char *buffer, size_t len);
int set_mode(Mode mode);
int set_pwm_rate(unsigned rate);
int set_update_rate(unsigned rate);
int set_motor_count(unsigned count);
int set_motor_test(bool motortest);
int set_overrideSecurityChecks(bool overrideSecurityChecks);
@@ -133,7 +127,6 @@ private:
static const unsigned _max_actuators = MAX_MOTORS;
static const bool showDebug = false;
Mode _mode;
int _update_rate;
int _current_update_rate;
int _task;
@@ -180,33 +173,15 @@ private:
static const GPIOConfig _gpio_tab[];
static const unsigned _ngpio;
void gpio_reset(void);
void gpio_set_function(uint32_t gpios, int function);
void gpio_write(uint32_t gpios, int function);
uint32_t gpio_read(void);
int gpio_ioctl(file *filp, int cmd, unsigned long arg);
int mk_servo_arm(bool status);
int mk_servo_set(unsigned int chan, short val);
int mk_servo_set_value(unsigned int chan, short val);
int mk_servo_test(unsigned int chan);
short scaling(float val, float inMin, float inMax, float outMin, float outMax);
};
const MK::GPIOConfig MK::_gpio_tab[] = {
{GPIO_GPIO0_INPUT, GPIO_GPIO0_OUTPUT, 0},
{GPIO_GPIO1_INPUT, GPIO_GPIO1_OUTPUT, 0},
{GPIO_GPIO2_INPUT, GPIO_GPIO2_OUTPUT, GPIO_USART2_CTS_1},
{GPIO_GPIO3_INPUT, GPIO_GPIO3_OUTPUT, GPIO_USART2_RTS_1},
{GPIO_GPIO4_INPUT, GPIO_GPIO4_OUTPUT, GPIO_USART2_TX_1},
{GPIO_GPIO5_INPUT, GPIO_GPIO5_OUTPUT, GPIO_USART2_RX_1},
{GPIO_GPIO6_INPUT, GPIO_GPIO6_OUTPUT, GPIO_CAN2_TX_2},
{GPIO_GPIO7_INPUT, GPIO_GPIO7_OUTPUT, GPIO_CAN2_RX_2},
};
const unsigned MK::_ngpio = sizeof(MK::_gpio_tab) / sizeof(MK::_gpio_tab[0]);
const int blctrlAddr_quad_plus[] = { 2, 2, -2, -2, 0, 0, 0, 0 }; // Addresstranslator for Quad + configuration
const int blctrlAddr_hexa_plus[] = { 0, 2, 2, -2, 1, -3, 0, 0 }; // Addresstranslator for Hexa + configuration
@@ -247,8 +222,7 @@ MK *g_mk;
MK::MK(int bus, const char *_device_path) :
I2C("mkblctrl", "/dev/mkblctrl", bus, 0, I2C_BUS_SPEED),
_mode(MODE_NONE),
_update_rate(50),
_update_rate(400),
_task(-1),
_t_actuators(-1),
_t_actuator_armed(-1),
@@ -317,26 +291,23 @@ MK::init(unsigned motors)
usleep(500000);
if (sizeof(_device) > 0) {
ret = register_driver(_device, &fops, 0666, (void *)this);
if (sizeof(_device) > 0) {
ret = register_driver(_device, &fops, 0666, (void *)this);
if (ret == OK) {
if (ret == OK) {
log("creating alternate output device");
_primary_pwm_device = true;
}
}
/* reset GPIOs */
gpio_reset();
}
/* start the IO interface task */
_task = task_spawn_cmd("mkblctrl",
SCHED_DEFAULT,
SCHED_PRIORITY_MAX - 20,
2048,
(main_t)&MK::task_main_trampoline,
nullptr);
SCHED_DEFAULT,
SCHED_PRIORITY_MAX - 20,
2048,
(main_t)&MK::task_main_trampoline,
nullptr);
if (_task < 0) {
@@ -354,43 +325,7 @@ MK::task_main_trampoline(int argc, char *argv[])
}
int
MK::set_mode(Mode mode)
{
/*
* Configure for PWM output.
*
* Note that regardless of the configured mode, the task is always
* listening and mixing; the mode just selects which of the channels
* are presented on the output pins.
*/
switch (mode) {
case MODE_2PWM:
up_pwm_servo_deinit();
_update_rate = UPDATE_RATE; /* default output rate */
break;
case MODE_4PWM:
up_pwm_servo_deinit();
_update_rate = UPDATE_RATE; /* default output rate */
break;
case MODE_NONE:
debug("MODE_NONE");
/* disable servo outputs and set a very low update rate */
up_pwm_servo_deinit();
_update_rate = UPDATE_RATE;
break;
default:
return -EINVAL;
}
_mode = mode;
return OK;
}
int
MK::set_pwm_rate(unsigned rate)
MK::set_update_rate(unsigned rate)
{
if ((rate > 500) || (rate < 10))
return -EINVAL;
@@ -621,11 +556,13 @@ MK::task_main()
}
}
if(!_overrideSecurityChecks) {
if (!_overrideSecurityChecks) {
/* don't go under BLCTRL_MIN_VALUE */
if (outputs.output[i] < BLCTRL_MIN_VALUE) {
outputs.output[i] = BLCTRL_MIN_VALUE;
}
}
/* output to BLCtrl's */
@@ -675,21 +612,24 @@ MK::task_main()
esc.esc[i].esc_current = (uint16_t) Motor[i].Current;
esc.esc[i].esc_rpm = (uint16_t) 0;
esc.esc[i].esc_setpoint = (float) Motor[i].SetPoint_PX4;
if (Motor[i].Version == 1) {
// BLCtrl 2.0 (11Bit)
esc.esc[i].esc_setpoint_raw = (uint16_t) (Motor[i].SetPoint<<3) | Motor[i].SetPointLowerBits;
esc.esc[i].esc_setpoint_raw = (uint16_t)(Motor[i].SetPoint << 3) | Motor[i].SetPointLowerBits;
} else {
// BLCtrl < 2.0 (8Bit)
esc.esc[i].esc_setpoint_raw = (uint16_t) Motor[i].SetPoint;
}
esc.esc[i].esc_temperature = (uint16_t) Motor[i].Temperature;
esc.esc[i].esc_state = (uint16_t) Motor[i].State;
esc.esc[i].esc_errorcount = (uint16_t) 0;
// if motortest is requested - do it...
if (_motortest == true) {
mk_servo_test(i);
}
// if motortest is requested - do it...
if (_motortest == true) {
mk_servo_test(i);
}
}
@@ -728,7 +668,7 @@ MK::mk_servo_arm(bool status)
unsigned int
MK::mk_check_for_blctrl(unsigned int count, bool showOutput, bool initI2C)
{
if(initI2C) {
if (initI2C) {
I2C::init();
}
@@ -781,8 +721,8 @@ MK::mk_check_for_blctrl(unsigned int count, bool showOutput, bool initI2C)
fprintf(stderr, "[mkblctrl] blctrl[%i] : found=%i\tversion=%i\tcurrent=%i\tmaxpwm=%i\ttemperature=%i\n", i, Motor[i].State, Motor[i].Version, Motor[i].Current, Motor[i].MaxPWM, Motor[i].Temperature);
}
if(!_overrideSecurityChecks) {
if (!_overrideSecurityChecks) {
if (foundMotorCount != 4 && foundMotorCount != 6 && foundMotorCount != 8) {
_task_should_exit = true;
}
@@ -811,8 +751,8 @@ MK::mk_servo_set(unsigned int chan, short val)
tmpVal = 0;
}
Motor[chan].SetPoint = (uint8_t)(tmpVal>>3)&0xff;
Motor[chan].SetPointLowerBits = ((uint8_t)tmpVal%8)&0x07;
Motor[chan].SetPoint = (uint8_t)(tmpVal >> 3) & 0xff;
Motor[chan].SetPointLowerBits = ((uint8_t)tmpVal % 8) & 0x07;
if (_armed == false) {
Motor[chan].SetPoint = 0;
@@ -1019,28 +959,6 @@ MK::ioctl(file *filp, int cmd, unsigned long arg)
{
int ret;
// XXX disabled, confusing users
/* try it as a GPIO ioctl first */
ret = gpio_ioctl(filp, cmd, arg);
if (ret != -ENOTTY)
return ret;
/* if we are in valid PWM mode, try it as a PWM ioctl as well */
/*
switch (_mode) {
case MODE_2PWM:
case MODE_4PWM:
case MODE_6PWM:
ret = pwm_ioctl(filp, cmd, arg);
break;
default:
debug("not in a PWM mode");
break;
}
*/
ret = pwm_ioctl(filp, cmd, arg);
/* if nobody wants it, let CDev have it */
@@ -1075,6 +993,10 @@ MK::pwm_ioctl(file *filp, int cmd, unsigned long arg)
ret = OK;
break;
case PWM_SERVO_GET_UPDATE_RATE:
*(uint32_t *)arg = _update_rate;
break;
case PWM_SERVO_SET_SELECT_UPDATE_RATE:
ret = OK;
break;
@@ -1084,6 +1006,7 @@ MK::pwm_ioctl(file *filp, int cmd, unsigned long arg)
if (arg < 2150) {
Motor[cmd - PWM_SERVO_SET(0)].RawPwmValue = (unsigned short)arg;
mk_servo_set(cmd - PWM_SERVO_SET(0), scaling(arg, 1010, 2100, 0, 2047));
} else {
ret = -EINVAL;
}
@@ -1198,139 +1121,10 @@ MK::write(file *filp, const char *buffer, size_t len)
return count * 2;
}
void
MK::gpio_reset(void)
{
/*
* Setup default GPIO config - all pins as GPIOs, GPIO driver chip
* to input mode.
*/
for (unsigned i = 0; i < _ngpio; i++)
stm32_configgpio(_gpio_tab[i].input);
stm32_gpiowrite(GPIO_GPIO_DIR, 0);
stm32_configgpio(GPIO_GPIO_DIR);
}
void
MK::gpio_set_function(uint32_t gpios, int function)
{
/*
* GPIOs 0 and 1 must have the same direction as they are buffered
* by a shared 2-port driver. Any attempt to set either sets both.
*/
if (gpios & 3) {
gpios |= 3;
/* flip the buffer to output mode if required */
if (GPIO_SET_OUTPUT == function)
stm32_gpiowrite(GPIO_GPIO_DIR, 1);
}
/* configure selected GPIOs as required */
for (unsigned i = 0; i < _ngpio; i++) {
if (gpios & (1 << i)) {
switch (function) {
case GPIO_SET_INPUT:
stm32_configgpio(_gpio_tab[i].input);
break;
case GPIO_SET_OUTPUT:
stm32_configgpio(_gpio_tab[i].output);
break;
case GPIO_SET_ALT_1:
if (_gpio_tab[i].alt != 0)
stm32_configgpio(_gpio_tab[i].alt);
break;
}
}
}
/* flip buffer to input mode if required */
if ((GPIO_SET_INPUT == function) && (gpios & 3))
stm32_gpiowrite(GPIO_GPIO_DIR, 0);
}
void
MK::gpio_write(uint32_t gpios, int function)
{
int value = (function == GPIO_SET) ? 1 : 0;
for (unsigned i = 0; i < _ngpio; i++)
if (gpios & (1 << i))
stm32_gpiowrite(_gpio_tab[i].output, value);
}
uint32_t
MK::gpio_read(void)
{
uint32_t bits = 0;
for (unsigned i = 0; i < _ngpio; i++)
if (stm32_gpioread(_gpio_tab[i].input))
bits |= (1 << i);
return bits;
}
int
MK::gpio_ioctl(struct file *filp, int cmd, unsigned long arg)
{
int ret = OK;
lock();
switch (cmd) {
case GPIO_RESET:
gpio_reset();
break;
case GPIO_SET_OUTPUT:
case GPIO_SET_INPUT:
case GPIO_SET_ALT_1:
gpio_set_function(arg, cmd);
break;
case GPIO_SET_ALT_2:
case GPIO_SET_ALT_3:
case GPIO_SET_ALT_4:
ret = -EINVAL;
break;
case GPIO_SET:
case GPIO_CLEAR:
gpio_write(arg, cmd);
break;
case GPIO_GET:
*(uint32_t *)arg = gpio_read();
break;
default:
ret = -ENOTTY;
}
unlock();
return ret;
}
namespace
{
enum PortMode {
PORT_MODE_UNSET = 0,
PORT_FULL_GPIO,
PORT_FULL_SERIAL,
PORT_FULL_PWM,
PORT_GPIO_AND_SERIAL,
PORT_PWM_AND_SERIAL,
PORT_PWM_AND_GPIO,
};
enum MappingMode {
MAPPING_MK = 0,
MAPPING_PX4,
@@ -1341,20 +1135,11 @@ enum FrameType {
FRAME_X,
};
PortMode g_port_mode;
int
mk_new_mode(PortMode new_mode, int update_rate, int motorcount, bool motortest, int px4mode, int frametype, bool overrideSecurityChecks)
mk_new_mode(int update_rate, int motorcount, bool motortest, int px4mode, int frametype, bool overrideSecurityChecks)
{
uint32_t gpio_bits;
int shouldStop = 0;
MK::Mode servo_mode;
/* reset to all-inputs */
g_mk->ioctl(0, GPIO_RESET, 0);
gpio_bits = 0;
servo_mode = MK::MODE_NONE;
/* native PX4 addressing) */
g_mk->set_px4mode(px4mode);
@@ -1368,7 +1153,6 @@ mk_new_mode(PortMode new_mode, int update_rate, int motorcount, bool motortest,
/* ovveride security checks if enabled */
g_mk->set_overrideSecurityChecks(overrideSecurityChecks);
/* count used motors */
do {
if (g_mk->mk_check_for_blctrl(8, false, false) != 0) {
@@ -1383,86 +1167,54 @@ mk_new_mode(PortMode new_mode, int update_rate, int motorcount, bool motortest,
g_mk->set_motor_count(g_mk->mk_check_for_blctrl(8, true, false));
/* (re)set the PWM output mode */
g_mk->set_mode(servo_mode);
if ((servo_mode != MK::MODE_NONE) && (update_rate != 0))
g_mk->set_pwm_rate(update_rate);
g_mk->set_update_rate(update_rate);
return OK;
}
int
mk_start(unsigned bus, unsigned motors, char *device_path)
{
int ret = OK;
if (g_mk == nullptr) {
g_mk = new MK(bus, device_path);
if (g_mk == nullptr) {
ret = -ENOMEM;
} else {
ret = g_mk->init(motors);
if (ret != OK) {
delete g_mk;
g_mk = nullptr;
}
}
}
return ret;
}
int
mk_check_for_i2c_esc_bus(char *device_path, int motors)
mk_start(unsigned motors, char *device_path)
{
int ret;
if (g_mk == nullptr) {
// try i2c3 first
g_mk = new MK(3, device_path);
g_mk = new MK(3, device_path);
if (!g_mk)
return -ENOMEM;
if (g_mk == nullptr) {
return -1;
} else {
ret = g_mk->mk_check_for_blctrl(8, false, true);
delete g_mk;
g_mk = nullptr;
if (ret > 0) {
return 3;
}
}
g_mk = new MK(1, device_path);
if (g_mk == nullptr) {
return -1;
} else {
ret = g_mk->mk_check_for_blctrl(8, false, true);
delete g_mk;
g_mk = nullptr;
if (ret > 0) {
return 1;
}
if (OK == g_mk->init(motors)) {
warnx("[mkblctrl] scanning i2c3...\n");
ret = g_mk->mk_check_for_blctrl(8, false, true);
if (ret > 0) {
return OK;
}
}
return -1;
}
delete g_mk;
g_mk = nullptr;
// fallback to bus 1
g_mk = new MK(1, device_path);
if (!g_mk)
return -ENOMEM;
if (OK == g_mk->init(motors)) {
warnx("[mkblctrl] scanning i2c1...\n");
ret = g_mk->mk_check_for_blctrl(8, false, true);
if (ret > 0) {
return OK;
}
}
delete g_mk;
g_mk = nullptr;
return -ENXIO;
}
} // namespace
@@ -1472,10 +1224,8 @@ extern "C" __EXPORT int mkblctrl_main(int argc, char *argv[]);
int
mkblctrl_main(int argc, char *argv[])
{
PortMode port_mode = PORT_FULL_PWM;
int pwm_update_rate_in_hz = UPDATE_RATE;
int motorcount = 8;
int bus = -1;
int px4mode = MAPPING_PX4;
int frametype = FRAME_PLUS; // + plus is default
bool motortest = false;
@@ -1489,18 +1239,6 @@ mkblctrl_main(int argc, char *argv[])
*/
for (int i = 1; i < argc; i++) {
/* look for the optional i2c bus parameter */
if (strcmp(argv[i], "-b") == 0 || strcmp(argv[i], "--bus") == 0) {
if (argc > i + 1) {
bus = atoi(argv[i + 1]);
newMode = true;
} else {
errx(1, "missing argument for i2c bus (-b)");
return 1;
}
}
/* look for the optional frame parameter */
if (strcmp(argv[i], "-mkmode") == 0 || strcmp(argv[i], "--mkmode") == 0) {
if (argc > i + 1) {
@@ -1560,51 +1298,43 @@ mkblctrl_main(int argc, char *argv[])
fprintf(stderr, "mkblctrl: help:\n");
fprintf(stderr, " [-mkmode {+/x}] [-b i2c_bus_number] [-d devicename] [--override-security-checks] [-h / --help]\n\n");
fprintf(stderr, "\t -mkmode {+/x} \t\t Type of frame, if Mikrokopter motor order is used.\n");
fprintf(stderr, "\t -b {i2c_bus_number} \t\t Set the i2c bus where the ESCs are connected to (default autoscan).\n");
fprintf(stderr, "\t -d {devicepath & name}\t\t Create alternate pwm device.\n");
fprintf(stderr, "\t --override-security-checks \t\t Disable all security checks (arming and number of ESCs). Used to test single Motors etc. (DANGER !!!)\n");
fprintf(stderr, "\n");
fprintf(stderr, "Motortest:\n");
fprintf(stderr, "First you have to start mkblctrl, the you can enter Motortest Mode with:\n");
fprintf(stderr, "mkblctrl -t\n");
fprintf(stderr, "This will spin up once every motor in order of motoraddress. (DANGER !!!)\n");
fprintf(stderr, "This will spin up once every motor in order of motoraddress. (DANGER !!!)\n");
exit(1);
}
if (!motortest) {
if (g_mk == nullptr) {
if (bus == -1) {
bus = mk_check_for_i2c_esc_bus(devicepath, motorcount);
}
if (g_mk == nullptr) {
if (mk_start(motorcount, devicepath) != OK) {
errx(1, "failed to start the MK-BLCtrl driver");
}
if (bus != -1) {
if (mk_start(bus, motorcount, devicepath) != OK) {
errx(1, "failed to start the MK-BLCtrl driver");
}
} else {
errx(1, "failed to start the MK-BLCtrl driver (cannot find i2c esc's)");
}
/* parameter set ? */
if (newMode) {
/* switch parameter */
return mk_new_mode(pwm_update_rate_in_hz, motorcount, motortest, px4mode, frametype, overrideSecurityChecks);
}
/* parameter set ? */
if (newMode) {
/* switch parameter */
return mk_new_mode(port_mode, pwm_update_rate_in_hz, motorcount, motortest, px4mode, frametype, overrideSecurityChecks);
}
exit(0);
exit(0);
} else {
errx(1, "MK-BLCtrl driver already running");
}
} else {
errx(1, "MK-BLCtrl driver already running");
}
} else {
if (g_mk == nullptr) {
errx(1, "MK-BLCtrl driver not running. You have to start it first.");
} else {
if (g_mk == nullptr) {
errx(1, "MK-BLCtrl driver not running. You have to start it first.");
} else {
g_mk->set_motor_test(motortest);
exit(0);
} else {
g_mk->set_motor_test(motortest);
exit(0);
}
}
}
}
}
src/drivers/px4fmu/fmu.cpp
+55 -3
View File
@@ -626,7 +626,7 @@ PX4FMU::task_main()
#ifdef HRT_PPM_CHANNEL
// see if we have new PPM input data
if (ppm_last_valid_decode != rc_in.timestamp) {
if (ppm_last_valid_decode != rc_in.timestamp_last_signal) {
// we have a new PPM frame. Publish it.
rc_in.channel_count = ppm_decoded_channels;
@@ -638,7 +638,15 @@ PX4FMU::task_main()
rc_in.values[i] = ppm_buffer[i];
}
rc_in.timestamp = ppm_last_valid_decode;
rc_in.timestamp_publication = ppm_last_valid_decode;
rc_in.timestamp_last_signal = ppm_last_valid_decode;
rc_in.rc_ppm_frame_length = ppm_frame_length;
rc_in.rssi = RC_INPUT_RSSI_MAX;
rc_in.rc_failsafe = false;
rc_in.rc_lost = false;
rc_in.rc_lost_frame_count = 0;
rc_in.rc_total_frame_count = 0;
/* lazily advertise on first publication */
if (to_input_rc == 0) {
@@ -1006,6 +1014,40 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg)
break;
case PWM_SERVO_SET_COUNT: {
/* change the number of outputs that are enabled for
* PWM. This is used to change the split between GPIO
* and PWM under control of the flight config
* parameters. Note that this does not allow for
* changing a set of pins to be used for serial on
* FMUv1
*/
switch (arg) {
case 0:
set_mode(MODE_NONE);
break;
case 2:
set_mode(MODE_2PWM);
break;
case 4:
set_mode(MODE_4PWM);
break;
#if defined(CONFIG_ARCH_BOARD_PX4FMU_V2)
case 6:
set_mode(MODE_6PWM);
break;
#endif
default:
ret = -EINVAL;
break;
}
break;
}
case MIXERIOCRESET:
if (_mixers != nullptr) {
delete _mixers;
@@ -1108,10 +1150,12 @@ PX4FMU::sensor_reset(int ms)
stm32_configgpio(GPIO_SPI_CS_GYRO_OFF);
stm32_configgpio(GPIO_SPI_CS_ACCEL_MAG_OFF);
stm32_configgpio(GPIO_SPI_CS_BARO_OFF);
stm32_configgpio(GPIO_SPI_CS_MPU_OFF);
stm32_gpiowrite(GPIO_SPI_CS_GYRO_OFF, 0);
stm32_gpiowrite(GPIO_SPI_CS_ACCEL_MAG_OFF, 0);
stm32_gpiowrite(GPIO_SPI_CS_BARO_OFF, 0);
stm32_gpiowrite(GPIO_SPI_CS_MPU_OFF, 0);
stm32_configgpio(GPIO_SPI1_SCK_OFF);
stm32_configgpio(GPIO_SPI1_MISO_OFF);
@@ -1124,10 +1168,12 @@ PX4FMU::sensor_reset(int ms)
stm32_configgpio(GPIO_GYRO_DRDY_OFF);
stm32_configgpio(GPIO_MAG_DRDY_OFF);
stm32_configgpio(GPIO_ACCEL_DRDY_OFF);
stm32_configgpio(GPIO_EXTI_MPU_DRDY_OFF);
stm32_gpiowrite(GPIO_GYRO_DRDY_OFF, 0);
stm32_gpiowrite(GPIO_MAG_DRDY_OFF, 0);
stm32_gpiowrite(GPIO_ACCEL_DRDY_OFF, 0);
stm32_gpiowrite(GPIO_EXTI_MPU_DRDY_OFF, 0);
/* set the sensor rail off */
stm32_configgpio(GPIO_VDD_3V3_SENSORS_EN);
@@ -1160,6 +1206,13 @@ PX4FMU::sensor_reset(int ms)
stm32_gpiowrite(GPIO_SPI_CS_ACCEL_MAG, 1);
stm32_gpiowrite(GPIO_SPI_CS_BARO, 1);
stm32_gpiowrite(GPIO_SPI_CS_MPU, 1);
// // XXX bring up the EXTI pins again
// stm32_configgpio(GPIO_GYRO_DRDY);
// stm32_configgpio(GPIO_MAG_DRDY);
// stm32_configgpio(GPIO_ACCEL_DRDY);
// stm32_configgpio(GPIO_EXTI_MPU_DRDY);
#endif
#endif
}
@@ -1432,7 +1485,6 @@ void
sensor_reset(int ms)
{
int fd;
int ret;
fd = open(PX4FMU_DEVICE_PATH, O_RDWR);
src/drivers/px4fmu/module.mk
+1 -2
View File
@@ -3,5 +3,4 @@
#
MODULE_COMMAND = fmu
SRCS = fmu.cpp \
../../modules/systemlib/pwm_limit/pwm_limit.c
SRCS = fmu.cpp
src/drivers/px4io/px4io.cpp
+298 -54
View File
@@ -61,6 +61,7 @@
#include <drivers/device/device.h>
#include <drivers/drv_rc_input.h>
#include <drivers/drv_pwm_output.h>
#include <drivers/drv_sbus.h>
#include <drivers/drv_gpio.h>
#include <drivers/drv_hrt.h>
#include <drivers/drv_mixer.h>
@@ -238,6 +239,7 @@ private:
unsigned _update_interval; ///< Subscription interval limiting send rate
bool _rc_handling_disabled; ///< If set, IO does not evaluate, but only forward the RC values
unsigned _rc_chan_count; ///< Internal copy of the last seen number of RC channels
uint64_t _rc_last_valid; ///< last valid timestamp
volatile int _task; ///< worker task id
volatile bool _task_should_exit; ///< worker terminate flag
@@ -270,9 +272,11 @@ private:
orb_advert_t _to_servorail; ///< servorail status
orb_advert_t _to_safety; ///< status of safety
actuator_outputs_s _outputs; ///<mixed outputs
actuator_outputs_s _outputs; ///< mixed outputs
servorail_status_s _servorail_status; ///< servorail status
bool _primary_pwm_device; ///< true if we are the default PWM output
bool _lockdown_override; ///< allow to override the safety lockdown
float _battery_amp_per_volt; ///< current sensor amps/volt
float _battery_amp_bias; ///< current sensor bias
@@ -443,14 +447,14 @@ private:
* @param vservo vservo register
* @param vrssi vrssi register
*/
void io_handle_vservo(uint16_t vbatt, uint16_t ibatt);
void io_handle_vservo(uint16_t vservo, uint16_t vrssi);
};
namespace
{
PX4IO *g_dev;
PX4IO *g_dev = nullptr;
}
@@ -466,6 +470,7 @@ PX4IO::PX4IO(device::Device *interface) :
_update_interval(0),
_rc_handling_disabled(false),
_rc_chan_count(0),
_rc_last_valid(0),
_task(-1),
_task_should_exit(false),
_mavlink_fd(-1),
@@ -489,6 +494,7 @@ PX4IO::PX4IO(device::Device *interface) :
_to_servorail(0),
_to_safety(0),
_primary_pwm_device(false),
_lockdown_override(false),
_battery_amp_per_volt(90.0f / 5.0f), // this matches the 3DR current sensor
_battery_amp_bias(0),
_battery_mamphour_total(0),
@@ -504,7 +510,8 @@ PX4IO::PX4IO(device::Device *interface) :
/* open MAVLink text channel */
_mavlink_fd = ::open(MAVLINK_LOG_DEVICE, 0);
_debug_enabled = true;
_debug_enabled = false;
_servorail_status.rssi_v = 0;
}
PX4IO::~PX4IO()
@@ -578,6 +585,12 @@ PX4IO::init()
/* get some parameters */
unsigned protocol = io_reg_get(PX4IO_PAGE_CONFIG, PX4IO_P_CONFIG_PROTOCOL_VERSION);
if (protocol == _io_reg_get_error) {
log("failed to communicate with IO");
mavlink_log_emergency(_mavlink_fd, "[IO] failed to communicate with IO, abort.");
return -1;
}
if (protocol != PX4IO_PROTOCOL_VERSION) {
log("protocol/firmware mismatch");
mavlink_log_emergency(_mavlink_fd, "[IO] protocol/firmware mismatch, abort.");
@@ -772,8 +785,6 @@ PX4IO::task_main()
hrt_abstime poll_last = 0;
hrt_abstime orb_check_last = 0;
log("starting");
_thread_mavlink_fd = ::open(MAVLINK_LOG_DEVICE, 0);
/*
@@ -807,8 +818,6 @@ PX4IO::task_main()
fds[0].fd = _t_actuator_controls_0;
fds[0].events = POLLIN;
log("ready");
/* lock against the ioctl handler */
lock();
@@ -1043,13 +1052,19 @@ PX4IO::io_set_arming_state()
uint16_t set = 0;
uint16_t clear = 0;
if (armed.armed && !armed.lockdown) {
if (armed.armed) {
set |= PX4IO_P_SETUP_ARMING_FMU_ARMED;
} else {
clear |= PX4IO_P_SETUP_ARMING_FMU_ARMED;
}
if (armed.lockdown && !_lockdown_override) {
set |= PX4IO_P_SETUP_ARMING_LOCKDOWN;
} else {
clear |= PX4IO_P_SETUP_ARMING_LOCKDOWN;
}
if (armed.ready_to_arm) {
set |= PX4IO_P_SETUP_ARMING_IO_ARM_OK;
@@ -1300,6 +1315,7 @@ PX4IO::io_handle_battery(uint16_t vbatt, uint16_t ibatt)
/* voltage is scaled to mV */
battery_status.voltage_v = vbatt / 1000.0f;
battery_status.voltage_filtered_v = vbatt / 1000.0f;
/*
ibatt contains the raw ADC count, as 12 bit ADC
@@ -1331,19 +1347,18 @@ PX4IO::io_handle_battery(uint16_t vbatt, uint16_t ibatt)
void
PX4IO::io_handle_vservo(uint16_t vservo, uint16_t vrssi)
{
servorail_status_s servorail_status;
servorail_status.timestamp = hrt_absolute_time();
_servorail_status.timestamp = hrt_absolute_time();
/* voltage is scaled to mV */
servorail_status.voltage_v = vservo * 0.001f;
servorail_status.rssi_v = vrssi * 0.001f;
_servorail_status.voltage_v = vservo * 0.001f;
_servorail_status.rssi_v = vrssi * 0.001f;
/* lazily publish the servorail voltages */
if (_to_servorail > 0) {
orb_publish(ORB_ID(servorail_status), _to_servorail, &servorail_status);
orb_publish(ORB_ID(servorail_status), _to_servorail, &_servorail_status);
} else {
_to_servorail = orb_advertise(ORB_ID(servorail_status), &servorail_status);
_to_servorail = orb_advertise(ORB_ID(servorail_status), &_servorail_status);
}
}
@@ -1353,7 +1368,10 @@ PX4IO::io_get_status()
uint16_t regs[6];
int ret;
/* get STATUS_FLAGS, STATUS_ALARMS, STATUS_VBATT, STATUS_IBATT in that order */
/* get
* STATUS_FLAGS, STATUS_ALARMS, STATUS_VBATT, STATUS_IBATT,
* STATUS_VSERVO, STATUS_VRSSI, STATUS_PRSSI
* in that order */
ret = io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_FLAGS, &regs[0], sizeof(regs) / sizeof(regs[0]));
if (ret != OK)
@@ -1390,7 +1408,8 @@ PX4IO::io_get_raw_rc_input(rc_input_values &input_rc)
*
* This should be the common case (9 channel R/C control being a reasonable upper bound).
*/
input_rc.timestamp = hrt_absolute_time();
input_rc.timestamp_publication = hrt_absolute_time();
ret = io_reg_get(PX4IO_PAGE_RAW_RC_INPUT, PX4IO_P_RAW_RC_COUNT, &regs[0], prolog + 9);
if (ret != OK)
@@ -1400,13 +1419,25 @@ PX4IO::io_get_raw_rc_input(rc_input_values &input_rc)
* Get the channel count any any extra channels. This is no more expensive than reading the
* channel count once.
*/
channel_count = regs[0];
channel_count = regs[PX4IO_P_RAW_RC_COUNT];
if (channel_count != _rc_chan_count)
perf_count(_perf_chan_count);
_rc_chan_count = channel_count;
input_rc.rc_ppm_frame_length = regs[PX4IO_P_RAW_RC_DATA];
input_rc.rssi = regs[PX4IO_P_RAW_RC_NRSSI];
input_rc.rc_failsafe = (regs[PX4IO_P_RAW_RC_FLAGS] & PX4IO_P_RAW_RC_FLAGS_FAILSAFE);
input_rc.rc_lost_frame_count = regs[PX4IO_P_RAW_LOST_FRAME_COUNT];
input_rc.rc_total_frame_count = regs[PX4IO_P_RAW_FRAME_COUNT];
/* rc_lost has to be set before the call to this function */
if (!input_rc.rc_lost && !input_rc.rc_failsafe)
_rc_last_valid = input_rc.timestamp_publication;
input_rc.timestamp_last_signal = _rc_last_valid;
if (channel_count > 9) {
ret = io_reg_get(PX4IO_PAGE_RAW_RC_INPUT, PX4IO_P_RAW_RC_BASE + 9, &regs[prolog + 9], channel_count - 9);
@@ -1423,13 +1454,12 @@ PX4IO::io_get_raw_rc_input(rc_input_values &input_rc)
int
PX4IO::io_publish_raw_rc()
{
/* if no raw RC, just don't publish */
if (!(_status & PX4IO_P_STATUS_FLAGS_RC_OK))
return OK;
/* fetch values from IO */
rc_input_values rc_val;
rc_val.timestamp = hrt_absolute_time();
/* set the RC status flag ORDER MATTERS! */
rc_val.rc_lost = !(_status & PX4IO_P_STATUS_FLAGS_RC_OK);
int ret = io_get_raw_rc_input(rc_val);
@@ -1448,6 +1478,11 @@ PX4IO::io_publish_raw_rc()
} else {
rc_val.input_source = RC_INPUT_SOURCE_UNKNOWN;
/* we do not know the RC input, only publish if RC OK flag is set */
/* if no raw RC, just don't publish */
if (!(_status & PX4IO_P_STATUS_FLAGS_RC_OK))
return OK;
}
/* lazily advertise on first publication */
@@ -1664,7 +1699,18 @@ PX4IO::mixer_send(const char *buf, unsigned buflen, unsigned retries)
total_len++;
}
int ret = io_reg_set(PX4IO_PAGE_MIXERLOAD, 0, (uint16_t *)frame, total_len / 2);
int ret;
for (int i = 0; i < 30; i++) {
/* failed, but give it a 2nd shot */
ret = io_reg_set(PX4IO_PAGE_MIXERLOAD, 0, (uint16_t *)frame, total_len / 2);
if (ret) {
usleep(333);
} else {
break;
}
}
/* print mixer chunk */
if (debuglevel > 5 || ret) {
@@ -1688,7 +1734,18 @@ PX4IO::mixer_send(const char *buf, unsigned buflen, unsigned retries)
msg->text[0] = '\n';
msg->text[1] = '\0';
int ret = io_reg_set(PX4IO_PAGE_MIXERLOAD, 0, (uint16_t *)frame, (sizeof(px4io_mixdata) + 2) / 2);
int ret;
for (int i = 0; i < 30; i++) {
/* failed, but give it a 2nd shot */
ret = io_reg_set(PX4IO_PAGE_MIXERLOAD, 0, (uint16_t *)frame, (sizeof(px4io_mixdata) + 2) / 2);
if (ret) {
usleep(333);
} else {
break;
}
}
if (ret)
return ret;
@@ -1734,15 +1791,14 @@ PX4IO::print_status()
printf("%u bytes free\n",
io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_FREEMEM));
uint16_t flags = io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_FLAGS);
printf("status 0x%04x%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
uint16_t io_status_flags = flags;
printf("status 0x%04x%s%s%s%s%s%s%s%s%s%s%s%s\n",
flags,
((flags & PX4IO_P_STATUS_FLAGS_OUTPUTS_ARMED) ? " OUTPUTS_ARMED" : ""),
((flags & PX4IO_P_STATUS_FLAGS_SAFETY_OFF) ? " SAFETY_OFF" : " SAFETY_SAFE"),
((flags & PX4IO_P_STATUS_FLAGS_OVERRIDE) ? " OVERRIDE" : ""),
((flags & PX4IO_P_STATUS_FLAGS_RC_OK) ? " RC_OK" : " RC_FAIL"),
((flags & PX4IO_P_STATUS_FLAGS_RC_PPM) ? " PPM" : ""),
(((flags & PX4IO_P_STATUS_FLAGS_RC_DSM) && (!(flags & PX4IO_P_STATUS_FLAGS_RC_DSM11))) ? " DSM10" : ""),
(((flags & PX4IO_P_STATUS_FLAGS_RC_DSM) && (flags & PX4IO_P_STATUS_FLAGS_RC_DSM11)) ? " DSM11" : ""),
((flags & PX4IO_P_STATUS_FLAGS_RC_SBUS) ? " SBUS" : ""),
((flags & PX4IO_P_STATUS_FLAGS_FMU_OK) ? " FMU_OK" : " FMU_FAIL"),
((flags & PX4IO_P_STATUS_FLAGS_RAW_PWM) ? " RAW_PWM_PASSTHROUGH" : ""),
@@ -1801,8 +1857,17 @@ PX4IO::print_status()
printf("\n");
if (raw_inputs > 0) {
int frame_len = io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_RC_DATA);
flags = io_reg_get(PX4IO_PAGE_RAW_RC_INPUT, PX4IO_P_RAW_RC_FLAGS);
printf("R/C flags: 0x%04x%s%s%s%s%s\n", flags,
(((io_status_flags & PX4IO_P_STATUS_FLAGS_RC_DSM) && (!(flags & PX4IO_P_RAW_RC_FLAGS_RC_DSM11))) ? " DSM10" : ""),
(((io_status_flags & PX4IO_P_STATUS_FLAGS_RC_DSM) && (flags & PX4IO_P_RAW_RC_FLAGS_RC_DSM11)) ? " DSM11" : ""),
((flags & PX4IO_P_RAW_RC_FLAGS_FRAME_DROP) ? " FRAME_DROP" : ""),
((flags & PX4IO_P_RAW_RC_FLAGS_FAILSAFE) ? " FAILSAFE" : ""),
((flags & PX4IO_P_RAW_RC_FLAGS_MAPPING_OK) ? " MAPPING_OK" : "")
);
if ((io_status_flags & PX4IO_P_STATUS_FLAGS_RC_PPM)) {
int frame_len = io_reg_get(PX4IO_PAGE_RAW_RC_INPUT, PX4IO_P_RAW_RC_DATA);
printf("RC data (PPM frame len) %u us\n", frame_len);
if ((frame_len - raw_inputs * 2000 - 3000) < 0) {
@@ -1828,16 +1893,23 @@ PX4IO::print_status()
printf("\n");
/* setup and state */
printf("features 0x%04x\n", io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES));
uint16_t features = io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES);
printf("features 0x%04x%s%s%s%s\n", features,
((features & PX4IO_P_SETUP_FEATURES_SBUS1_OUT) ? " S.BUS1_OUT" : ""),
((features & PX4IO_P_SETUP_FEATURES_SBUS2_OUT) ? " S.BUS2_OUT" : ""),
((features & PX4IO_P_SETUP_FEATURES_PWM_RSSI) ? " RSSI_PWM" : ""),
((features & PX4IO_P_SETUP_FEATURES_ADC_RSSI) ? " RSSI_ADC" : "")
);
uint16_t arming = io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING);
printf("arming 0x%04x%s%s%s%s%s%s\n",
printf("arming 0x%04x%s%s%s%s%s%s%s\n",
arming,
((arming & PX4IO_P_SETUP_ARMING_FMU_ARMED) ? " FMU_ARMED" : " FMU_DISARMED"),
((arming & PX4IO_P_SETUP_ARMING_IO_ARM_OK) ? " IO_ARM_OK" : " IO_ARM_DENIED"),
((arming & PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK) ? " MANUAL_OVERRIDE_OK" : ""),
((arming & PX4IO_P_SETUP_ARMING_FAILSAFE_CUSTOM) ? " FAILSAFE_CUSTOM" : ""),
((arming & PX4IO_P_SETUP_ARMING_INAIR_RESTART_OK) ? " INAIR_RESTART_OK" : ""),
((arming & PX4IO_P_SETUP_ARMING_ALWAYS_PWM_ENABLE) ? " ALWAYS_PWM_ENABLE" : ""));
((arming & PX4IO_P_SETUP_ARMING_FMU_ARMED) ? " FMU_ARMED" : " FMU_DISARMED"),
((arming & PX4IO_P_SETUP_ARMING_IO_ARM_OK) ? " IO_ARM_OK" : " IO_ARM_DENIED"),
((arming & PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK) ? " MANUAL_OVERRIDE_OK" : ""),
((arming & PX4IO_P_SETUP_ARMING_FAILSAFE_CUSTOM) ? " FAILSAFE_CUSTOM" : ""),
((arming & PX4IO_P_SETUP_ARMING_INAIR_RESTART_OK) ? " INAIR_RESTART_OK" : ""),
((arming & PX4IO_P_SETUP_ARMING_ALWAYS_PWM_ENABLE) ? " ALWAYS_PWM_ENABLE" : ""),
((arming & PX4IO_P_SETUP_ARMING_LOCKDOWN) ? " LOCKDOWN" : ""));
#ifdef CONFIG_ARCH_BOARD_PX4FMU_V1
printf("rates 0x%04x default %u alt %u relays 0x%04x\n",
io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_PWM_RATES),
@@ -2034,6 +2106,14 @@ PX4IO::ioctl(file * /*filep*/, int cmd, unsigned long arg)
*(unsigned *)arg = _max_actuators;
break;
case PWM_SERVO_SET_DISABLE_LOCKDOWN:
_lockdown_override = arg;
break;
case PWM_SERVO_GET_DISABLE_LOCKDOWN:
*(unsigned *)arg = _lockdown_override;
break;
case DSM_BIND_START:
io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_DSM, dsm_bind_power_down);
usleep(500000);
@@ -2250,6 +2330,38 @@ PX4IO::ioctl(file * /*filep*/, int cmd, unsigned long arg)
break;
case RC_INPUT_ENABLE_RSSI_ANALOG:
if (arg) {
ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, 0, PX4IO_P_SETUP_FEATURES_ADC_RSSI);
} else {
ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, PX4IO_P_SETUP_FEATURES_ADC_RSSI, 0);
}
break;
case RC_INPUT_ENABLE_RSSI_PWM:
if (arg) {
ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, 0, PX4IO_P_SETUP_FEATURES_PWM_RSSI);
} else {
ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, PX4IO_P_SETUP_FEATURES_PWM_RSSI, 0);
}
break;
case SBUS_SET_PROTO_VERSION:
if (arg == 1) {
ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, 0, PX4IO_P_SETUP_FEATURES_SBUS1_OUT);
} else if (arg == 2) {
ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, 0, PX4IO_P_SETUP_FEATURES_SBUS2_OUT);
} else {
ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, (PX4IO_P_SETUP_FEATURES_SBUS1_OUT | PX4IO_P_SETUP_FEATURES_SBUS2_OUT), 0);
}
break;
default:
/* not a recognized value */
ret = -ENOTTY;
@@ -2358,8 +2470,10 @@ start(int argc, char *argv[])
/* create the driver - it will set g_dev */
(void)new PX4IO(interface);
if (g_dev == nullptr)
if (g_dev == nullptr) {
delete interface;
errx(1, "driver alloc failed");
}
if (OK != g_dev->init()) {
delete g_dev;
@@ -2621,7 +2735,7 @@ monitor(void)
/* clear screen */
printf("\033[2J");
unsigned cancels = 3;
unsigned cancels = 2;
for (;;) {
pollfd fds[1];
@@ -2635,17 +2749,17 @@ monitor(void)
read(0, &c, 1);
if (cancels-- == 0) {
printf("\033[H"); /* move cursor home and clear screen */
printf("\033[2J\033[H"); /* move cursor home and clear screen */
exit(0);
}
}
if (g_dev != nullptr) {
printf("\033[H"); /* move cursor home and clear screen */
printf("\033[2J\033[H"); /* move cursor home and clear screen */
(void)g_dev->print_status();
(void)g_dev->print_debug();
printf("[ Use 'px4io debug <N>' for more output. Hit <enter> three times to exit monitor mode ]\n");
printf("\n\n\n[ Use 'px4io debug <N>' for more output. Hit <enter> three times to exit monitor mode ]\n");
} else {
errx(1, "driver not loaded, exiting");
@@ -2657,13 +2771,72 @@ void
if_test(unsigned mode)
{
device::Device *interface = get_interface();
int result;
int result = interface->ioctl(1, mode); /* XXX magic numbers */
delete interface;
if (interface) {
result = interface->ioctl(1, mode); /* XXX magic numbers */
delete interface;
} else {
errx(1, "interface not loaded, exiting");
}
errx(0, "test returned %d", result);
}
void
lockdown(int argc, char *argv[])
{
if (g_dev != nullptr) {
if (argc > 2 && !strcmp(argv[2], "disable")) {
warnx("WARNING: ACTUATORS WILL BE LIVE IN HIL! PROCEED?");
warnx("Press 'y' to enable, any other key to abort.");
/* check if user wants to abort */
char c;
struct pollfd fds;
int ret;
hrt_abstime start = hrt_absolute_time();
const unsigned long timeout = 5000000;
while (hrt_elapsed_time(&start) < timeout) {
fds.fd = 0; /* stdin */
fds.events = POLLIN;
ret = poll(&fds, 1, 0);
if (ret > 0) {
read(0, &c, 1);
if (c != 'y') {
exit(0);
} else if (c == 'y') {
break;
}
}
usleep(10000);
}
if (hrt_elapsed_time(&start) > timeout)
errx(1, "TIMEOUT! ABORTED WITHOUT CHANGES.");
(void)g_dev->ioctl(0, PWM_SERVO_SET_DISABLE_LOCKDOWN, 1);
warnx("WARNING: ACTUATORS ARE NOW LIVE IN HIL!");
} else {
(void)g_dev->ioctl(0, PWM_SERVO_SET_DISABLE_LOCKDOWN, 0);
warnx("ACTUATORS ARE NOW SAFE IN HIL.");
}
} else {
errx(1, "driver not loaded, exiting");
}
exit(0);
}
} /* namespace */
int
@@ -2688,6 +2861,7 @@ px4io_main(int argc, char *argv[])
printf("[px4io] loaded, detaching first\n");
/* stop the driver */
delete g_dev;
g_dev = nullptr;
}
PX4IO_Uploader *up;
@@ -2760,18 +2934,30 @@ px4io_main(int argc, char *argv[])
}
if (g_dev == nullptr) {
warnx("px4io is not started, still attempting upgrade");
} else {
uint16_t arg = atol(argv[2]);
int ret = g_dev->ioctl(nullptr, PX4IO_REBOOT_BOOTLOADER, arg);
if (ret != OK) {
printf("reboot failed - %d\n", ret);
exit(1);
}
// tear down the px4io instance
delete g_dev;
/* allocate the interface */
device::Device *interface = get_interface();
/* create the driver - it will set g_dev */
(void)new PX4IO(interface);
if (g_dev == nullptr) {
delete interface;
errx(1, "driver alloc failed");
}
}
uint16_t arg = atol(argv[2]);
int ret = g_dev->ioctl(nullptr, PX4IO_REBOOT_BOOTLOADER, arg);
if (ret != OK) {
printf("reboot failed - %d\n", ret);
exit(1);
}
// tear down the px4io instance
delete g_dev;
g_dev = nullptr;
// upload the specified firmware
const char *fn[2];
fn[0] = argv[3];
@@ -2829,6 +3015,7 @@ px4io_main(int argc, char *argv[])
/* stop the driver */
delete g_dev;
g_dev = nullptr;
exit(0);
}
@@ -2883,6 +3070,63 @@ px4io_main(int argc, char *argv[])
if (!strcmp(argv[1], "bind"))
bind(argc, argv);
if (!strcmp(argv[1], "lockdown"))
lockdown(argc, argv);
if (!strcmp(argv[1], "sbus1_out")) {
/* we can cheat and call the driver directly, as it
* doesn't reference filp in ioctl()
*/
int ret = g_dev->ioctl(nullptr, SBUS_SET_PROTO_VERSION, 1);
if (ret != 0) {
errx(ret, "S.BUS v1 failed");
}
exit(0);
}
if (!strcmp(argv[1], "sbus2_out")) {
/* we can cheat and call the driver directly, as it
* doesn't reference filp in ioctl()
*/
int ret = g_dev->ioctl(nullptr, SBUS_SET_PROTO_VERSION, 2);
if (ret != 0) {
errx(ret, "S.BUS v2 failed");
}
exit(0);
}
if (!strcmp(argv[1], "rssi_analog")) {
/* we can cheat and call the driver directly, as it
* doesn't reference filp in ioctl()
*/
int ret = g_dev->ioctl(nullptr, RC_INPUT_ENABLE_RSSI_ANALOG, 1);
if (ret != 0) {
errx(ret, "RSSI analog failed");
}
exit(0);
}
if (!strcmp(argv[1], "rssi_pwm")) {
/* we can cheat and call the driver directly, as it
* doesn't reference filp in ioctl()
*/
int ret = g_dev->ioctl(nullptr, RC_INPUT_ENABLE_RSSI_PWM, 1);
if (ret != 0) {
errx(ret, "RSSI PWM failed");
}
exit(0);
}
out:
errx(1, "need a command, try 'start', 'stop', 'status', 'test', 'monitor', 'debug',\n 'recovery', 'limit', 'current', 'bind', 'checkcrc', 'forceupdate' or 'update'");
errx(1, "need a command, try 'start', 'stop', 'status', 'test', 'monitor', 'debug <level>',\n"
"'recovery', 'limit <rate>', 'current', 'bind', 'checkcrc',\n"
"'forceupdate', 'update', 'sbus1_out', 'sbus2_out', 'rssi_analog' or 'rssi_pwm'");
}
src/drivers/px4io/px4io_uploader.cpp
+15 -2
View File
@@ -51,6 +51,7 @@
#include <poll.h>
#include <termios.h>
#include <sys/stat.h>
#include <nuttx/arch.h>
#include <crc32.h>
@@ -120,8 +121,15 @@ PX4IO_Uploader::upload(const char *filenames[])
cfsetspeed(&t, 115200);
tcsetattr(_io_fd, TCSANOW, &t);
/* look for the bootloader */
ret = sync();
/* look for the bootloader for 150 ms */
for (int i = 0; i < 15; i++) {
ret = sync();
if (ret == OK) {
break;
} else {
usleep(10000);
}
}
if (ret != OK) {
/* this is immediately fatal */
@@ -226,6 +234,11 @@ PX4IO_Uploader::upload(const char *filenames[])
close(_fw_fd);
close(_io_fd);
_io_fd = -1;
// sleep for enough time for the IO chip to boot. This makes
// forceupdate more reliably startup IO again after update
up_udelay(100*1000);
return ret;
}
src/drivers/px4io/uploader.h
+1 -1
View File
@@ -91,7 +91,7 @@ private:
void drain();
int send(uint8_t c);
int send(uint8_t *p, unsigned count);
int get_sync(unsigned timeout = 1000);
int get_sync(unsigned timeout = 40);
int sync();
int get_info(int param, uint32_t &val);
int erase();