Mixers: Use geometry filename as mixer name

src/lib/mixer/CMakeLists.txt

@@ -33,7 +33,7 @@
 
 include_directories(${CMAKE_CURRENT_BINARY_DIR})
 
-set(geom_files
+set(geometry_files
 	quad_x.toml
 	quad_h.toml
 	quad_plus.toml
@@ -56,34 +56,34 @@ set(geom_files
 	dodeca_bottom_cox.toml
 )
 
-set(geom_list)
+set(geometries_list)
-foreach(geom_file ${geom_files})
+foreach(geom_file ${geometry_files})
-	list(APPEND geom_list ${CMAKE_CURRENT_SOURCE_DIR}/geoms/${geom_file})
+	list(APPEND geometries_list ${CMAKE_CURRENT_SOURCE_DIR}/geometries/${geom_file})
 endforeach()
 
 add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/mixer_multirotor.generated.h
-	COMMAND ${PYTHON_EXECUTABLE} ${CMAKE_CURRENT_SOURCE_DIR}/geoms/tools/px_generate_mixers.py -f ${geom_list} -o ${CMAKE_CURRENT_BINARY_DIR}/mixer_multirotor.generated.h
+	COMMAND ${PYTHON_EXECUTABLE} ${CMAKE_CURRENT_SOURCE_DIR}/geometries/tools/px_generate_mixers.py -f ${geometries_list} -o ${CMAKE_CURRENT_BINARY_DIR}/mixer_multirotor.generated.h
-	DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/geoms/tools/px_generate_mixers.py ${geom_list}
+	DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/geometries/tools/px_generate_mixers.py ${geometries_list}
 	)
 add_custom_target(mixer_gen
 	DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/mixer_multirotor.generated.h
-	DEPENDS ${geom_list})
+	DEPENDS ${geometries_list})
 
 add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/mixer_multirotor_normalized.generated.h
-	COMMAND ${PYTHON_EXECUTABLE} ${CMAKE_CURRENT_SOURCE_DIR}/geoms/tools/px_generate_mixers.py --normalize -f ${geom_list} -o ${CMAKE_CURRENT_BINARY_DIR}/mixer_multirotor_normalized.generated.h
+	COMMAND ${PYTHON_EXECUTABLE} ${CMAKE_CURRENT_SOURCE_DIR}/geometries/tools/px_generate_mixers.py --normalize -f ${geometries_list} -o ${CMAKE_CURRENT_BINARY_DIR}/mixer_multirotor_normalized.generated.h
-	DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/geoms/tools/px_generate_mixers.py ${geom_list}
+	DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/geometries/tools/px_generate_mixers.py ${geometries_list}
 	)
 add_custom_target(mixer_gen_norm
 	DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/mixer_multirotor_normalized.generated.h
-	DEPENDS ${geom_list})
+	DEPENDS ${geometries_list})
 
 add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/mixer_multirotor_6dof.generated.h
-	COMMAND ${PYTHON_EXECUTABLE} ${CMAKE_CURRENT_SOURCE_DIR}/geoms/tools/px_generate_mixers.py --sixdof -f ${geom_list} -o ${CMAKE_CURRENT_BINARY_DIR}/mixer_multirotor_6dof.generated.h
+	COMMAND ${PYTHON_EXECUTABLE} ${CMAKE_CURRENT_SOURCE_DIR}/geometries/tools/px_generate_mixers.py --sixdof -f ${geometries_list} -o ${CMAKE_CURRENT_BINARY_DIR}/mixer_multirotor_6dof.generated.h
-	DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/geoms/tools/px_generate_mixers.py ${geom_list}
+	DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/geometries/tools/px_generate_mixers.py ${geometries_list}
 	)
 add_custom_target(mixer_gen_6dof
 	DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/mixer_multirotor_6dof.generated.h
-	DEPENDS ${geom_list})
+	DEPENDS ${geometries_list})
 
 add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/mixer_multirotor_legacy.generated.h
 	COMMAND ${PYTHON_EXECUTABLE} ${CMAKE_CURRENT_SOURCE_DIR}/multi_tables.py > ${CMAKE_CURRENT_BINARY_DIR}/mixer_multirotor_legacy.generated.h

src/lib/mixer/geometries/dodeca_bottom_cox.toml

@@ -1,7 +1,6 @@
 # Generic Dodecacopter in X coax configuration, bottom half
 
 [info]
-name = "dodeca_bottom_cox"
 key = "6a"
 description = "Generic Dodecacopter in X coax configuration, bottom half"
 

src/lib/mixer/geometries/dodeca_top_cox.toml

@@ -1,7 +1,6 @@
 # Generic Dodecacopter in X coax configuration, top half
 
 [info]
-name = "dodeca_top_cox"
 key = "6m"
 description = "Generic Dodecacopter in X coax configuration, top half"
 

src/lib/mixer/geometries/hex_cox.toml

@@ -1,7 +1,6 @@
 # Generic Hexacopter in coaxial configuration
 
 [info]
-name = "hex_cox"
 key = "6c"
 description = "Generic Hexacopter in coaxial configuration"
 

src/lib/mixer/geometries/hex_plus.toml

@@ -1,7 +1,6 @@
 # Generic Hexacopter in + configuration
 
 [info]
-name = "hex_plus"
 key = "6+"
 description = "Generic Hexacopter in + configuration"
 

src/lib/mixer/geometries/hex_t.toml

@@ -1,7 +1,6 @@
 # Generic Hexacopter in T configuration
 
 [info]
-name = "hex_t"
 key = "6t"
 description = "Generic Hexacopter in T configuration"
 

src/lib/mixer/geometries/hex_x.toml

@@ -1,7 +1,6 @@
 # Generic Hexacopter in X configuration
 
 [info]
-name = "hex_x"
 key = "6x"
 description = "Generic Hexacopter in X configuration"
 

src/lib/mixer/geometries/octa_cox.toml

@@ -1,7 +1,6 @@
 # Generic Octacopter in coax configuration
 
 [info]
-name = "octa_cox"
 key = "8c"
 description = "GenericOctacopter in coax configuration"
 

src/lib/mixer/geometries/octa_cox_wide.toml

@@ -1,7 +1,6 @@
 # Generic Octacopter in wide coax configuration
 
 [info]
-name = "octa_cox_wide"
 key = "8cw"
 description = "Generic Octacopter in wide coax configuration"
 

src/lib/mixer/geometries/octa_plus.toml

@@ -1,7 +1,6 @@
 # Generic Octacopter in + configuration
 
 [info]
-name = "octa_plus"
 key = "8+"
 description = "Generic Octacopter in + configuration"
 

src/lib/mixer/geometries/octa_x.toml

@@ -1,7 +1,6 @@
 # Generic Octacopter in X configuration
 
 [info]
-name = "octa_x"
 key = "8x"
 description = "Generic Octacopter in X configuration"
 

src/lib/mixer/geometries/quad_deadcat.toml

@@ -2,7 +2,6 @@
 # Same geometry as quad_wide, except CG is located at intersection of rear arms, so front motors are more loaded.
 
 [info]
-name = "quad_deadcat"
 key = "4dc"
 description = "SK450 DeadCat Quadcopter, CG at intersection of rear arms"
 

src/lib/mixer/geometries/quad_h.toml

@@ -1,7 +1,6 @@
 # Generic Quadcopter in H configuration
 
 [info]
-name = "quad_h"
 key = "4h"
 description = "Generic Quadcopter in H configuration"
 

src/lib/mixer/geometries/quad_plus.toml

@@ -1,7 +1,6 @@
 # Generic Quadcopter in + configuration
 
 [info]
-name = "quad_plus"
 key = "4+"
 description = "Generic Quadcopter in + configuration"
 

src/lib/mixer/geometries/quad_vtail.toml

@@ -1,7 +1,6 @@
 # Quadcopter in Y configuration with rear props tilted at 45 degrees
 
 [info]
-name = "quad_vtail"
 key = "4vt"
 description = "Quadcopter in Y configuration with rear props tilted at 45 degrees"
 

src/lib/mixer/geometries/quad_wide.toml

@@ -1,7 +1,6 @@
 # Generic Quadcopter in wide configuration
 
 [info]
-name = "quad_wide"
 key = "4w"
 description = "Quadcopter in wide configuration. Same geometry as SK450 Deadcat except the CG is moved backward to load all motors equally"
 

src/lib/mixer/geometries/quad_x.toml

@@ -1,7 +1,6 @@
 # Generic Quadcopter in X configuration
 
 [info]
-name = "quad_x"
 key = "4x"
 description = "Generic Quadcopter in X configuration"
 

src/lib/mixer/geometries/quad_x_pusher.toml

@@ -2,7 +2,6 @@
 # with added pusher motor in the back
 
 [info]
-name = "quad_x_pusher"
 key = "4x1p"
 description = "Quadcopter in X configuration, with added pusher motor in the back"
 

src/lib/mixer/geometries/quad_y.toml

@@ -1,7 +1,6 @@
 # Quadcopter in Y configuration with coax rear props
 
 [info]
-name = "quad_y"
 key = "4y"
 description = "Quadcopter in Y configuration with coax rear props"
 

src/lib/mixer/geometries/tools/px_generate_mixers.py

@@ -67,6 +67,7 @@ def parse_geometry_toml(filename):
     '''
     Parses toml geometry file and returns a dictionary with curated list of rotors
     '''
+    import os
 
     # Load toml file
     d = toml.load(filename)
@@ -82,10 +83,12 @@ def parse_geometry_toml(filename):
         raise AttributeError('{}: Error, missing info section'.format(filename))
 
     # Check info section
-    for field in ['name', 'key', 'description']:
+    for field in ['key', 'description']:
         if field not in d['info']:
             raise AttributeError('{}: Error, unspecified info field "{}"'.format(filename, field))
 
+    # Use filename as mixer name
+    d['info']['name'] = os.path.basename(filename).split('.')[0].lower()
 
     # Convert rotors
     rotor_list = []
@@ -234,7 +237,9 @@ def generate_mixer_multirotor_header(geometries_list, use_normalized_mix=False,
     # Print enum
     buf.write(u"enum class MultirotorGeometry : MultirotorGeometryUnderlyingType {\n")
     for i, geometry in enumerate(geometries_list):
-        buf.write(u"\t{} = {},\n".format(geometry['info']['name'].upper(), i))
+        buf.write(u"\t{},{}// {} (text key {})\n".format(
+            geometry['info']['name'].upper(), ' ' * (max(0, 30 - len(geometry['info']['name']))),
+            geometry['info']['description'], geometry['info']['key']))
     buf.write(u"\n\tMAX_GEOMETRY\n")
     buf.write(u"}; // enum class MultirotorGeometry\n\n")
 

src/lib/mixer/geometries/tri_y.toml

@@ -1,7 +1,6 @@
 # Tri Y
 
 [info]
-name = "tri_y"
 key = "3y"
 description = "Tri Y"
 

src/lib/mixer/geometries/twin_engine.toml

@@ -1,7 +1,6 @@
 # Twin engine
 
 [info]
-name = "twin_engine"
 key = "2-"
 description = "Twin engine"